Displacement field reconstruction in landslide physical modeling by using a terrain laser scanner e Part 1:Methodology,error analysis and validation

Laser scanning technology has been widely used in landslide aspects.However,the existing deformation analysis based on terrain laser scanners can only provide limited information,which is insufficient for understanding landslide kinematics and failure mechanisms.To overcome this limitation,this paper proposes an automated method for processing point clouds collected in landslide physical modeling.This method allows the acquisition of quantitative three-dimensional(3D)deformation field information.The results show the organized and spatially related point cloud segmentation in terms of spherical targets.The segmented point clouds can be fitted to determine the locations of all preset targets and their corresponding location changes.The proposed method has been validated based on theoretical analysis and numerical and physical tests,which indicates that it can batch-process massive data sets with high computational efficiency and good noise resistance.Compared to existing methods,this method shows a significant potential for understanding landslide kinematics and failure mechanisms and advancing the application of 3D laser scanning in geotechnical modeling.

Relationships between Terrain Features and Forecasting Errors of Surface Wind Speeds in a Mesoscale Numerical Weather Prediction Model

Numerical weather prediction(NWP)models have always presented large forecasting errors of surface wind speeds over regions with complex terrain.In this study,surface wind forecasts from an operational NWP model,the SMS-WARR(Shanghai Meteorological Service-WRF ADAS Rapid Refresh System),are analyzed to quantitatively reveal the relationships between the forecasted surface wind speed errors and terrain features,with the intent of providing clues to better apply the NWP model to complex terrain regions.The terrain features are described by three parameters:the standard deviation of the model grid-scale orography,terrain height error of the model,and slope angle.The results show that the forecast bias has a unimodal distribution with a change in the standard deviation of orography.The minimum ME(the mean value of bias)is 1.2 m s^(-1) when the standard deviation is between 60 and 70 m.A positive correlation exists between bias and terrain height error,with the ME increasing by 10%−30%for every 200 m increase in terrain height error.The ME decreases by 65.6%when slope angle increases from(0.5°−1.5°)to larger than 3.5°for uphill winds but increases by 35.4%when the absolute value of slope angle increases from(0.5°−1.5°)to(2.5°−3.5°)for downhill winds.Several sensitivity experiments are carried out with a model output statistical(MOS)calibration model for surface wind speeds and ME(RMSE)has been reduced by 90%(30%)by introducing terrain parameters,demonstrating the value of this study.

HOG-VGG:VGG Network with HOG Feature Fusion for High-Precision PolSAR Terrain Classification

This article proposes a VGG network with histogram of oriented gradient(HOG) feature fusion(HOG-VGG) for polarization synthetic aperture radar(PolSAR) image terrain classification.VGG-Net has a strong ability of deep feature extraction,which can fully extract the global deep features of different terrains in PolSAR images,so it is widely used in PolSAR terrain classification.However,VGG-Net ignores the local edge & shape features,resulting in incomplete feature representation of the PolSAR terrains,as a consequence,the terrain classification accuracy is not promising.In fact,edge and shape features play an important role in PolSAR terrain classification.To solve this problem,a new VGG network with HOG feature fusion was specifically proposed for high-precision PolSAR terrain classification.HOG-VGG extracts both the global deep semantic features and the local edge & shape features of the PolSAR terrains,so the terrain feature representation completeness is greatly elevated.Moreover,HOG-VGG optimally fuses the global deep features and the local edge & shape features to achieve the best classification results.The superiority of HOG-VGG is verified on the Flevoland,San Francisco and Oberpfaffenhofen datasets.Experiments show that the proposed HOG-VGG achieves much better PolSAR terrain classification performance,with overall accuracies of 97.54%,94.63%,and 96.07%,respectively.

Using video imagery to reconstruct the 3D intertidal terrain along a beach with multiple cusps

A high-frequency,high-resolution shore-based video monitoring system(VMS)was installed on a macrotidal(tidal amplitude>4 m)beach with multiple cusps along the Quanzhou coast,China.Herein,we propose a video imagery-based method that is coupled with waterline and water level observations to reconstruct the terrain of the intertidal zone over one tidal cycle.Furthermore,the beach cusp system(BCS)was precisely processed and embedded into the digital elevation model(DEM)to more effectively express the microrelief and detailed characteristics of the intertidal zone.During a field experiment conducted in January 2022,the reconstructed DEM was deemed satisfactory.The DEM was verified by RTK-GPS and had an average vertical root mean square error along corresponding RTK-GPS-derived intertidal profiles and corresponding BCS points of 0.134 m and 0.065 m,respectively.The results suggest that VMSs are an effective tool for investigating coastal geomorphic processes.

Terrain-influenced wind flow of the Qitai radio telescope site

The wind environment of a site is one of the important factors affecting the observation performance of large aperture and high-performance radio telescopes.Exploring the relationship between the effects of different terrains on wind flow is important to optimize the wind environment of the site.The terrain of the Qitai radio telescope(QTT)site located in east Tianshan Mountains at an elevation of about 1800 m was used to study the wind flow in the adjacent zone of antenna based on numerical simulation.The area from 600m south to 600m north of the antenna is defined as the antenna adjacent zone,and three groups of boundaries with different terrains are set up upstream and downstream,respectively.Since the zone where the antenna is located is a slope terrain,in order to verify the influence of terrain on the wind flow and to clarify the relationship between the influence of boundary terrain on the wind flow,a control group of horizontal terrain is constructed.The simulation results show that the wind flow is mainly influenced by the terrain.The highest elevation of the upstream and downstream boundary terrains affects the basic wind speed.The upstream boundary terrain has a greater impact on wind flow than the downstream boundary terrain.In addition,the wind speed profile index obtained by numerical simulation is smaller than the actual index for the wind from south.Therefore,the wind speed at the upper level(about 100 m)obtained by inversion based on the measured wind speed at the bottom(about 10 m)is also smaller than the actual wind speed.

Single-element Anomaly Mapping from Stream Sediment Geochemical Landscapes Aided by Digital Terrain Analysis

The identification of anomalies within stream sediment geochemical data is one of the fastest developing areas in mineral exploration.The various means used to achieve this objective make use of either continuous or discrete field models of stream sediment geochemical data.To map anomalies in a discrete field model of such data,two corrections are required:background correction and downstream dilution correction.Topography and geomorphology are important factors in variations of element content in stream sediments.However,few studies have considered,through the use of digital terrain analysis,the influence of geomorphic features in downstream dilution correction of stream sediment geochemical data.This study proposes and demonstrates an improvement to the traditional downstream dilution correction equation,based on the use of digital terrain analysis to map single-element anomalies in stream sediment geochemical landscapes.Moreover,this study compares the results of analyses using discrete and continuous field models of stream sediment geochemical data from the Xincang area,Tibet.The efficiency of the proposed methodology was validated against known mineral occurrences.The results indicate that catchment-based analysis outperforms interpolation-based analysis of stream sediment geochemical data for anomaly mapping.Meanwhile,the proposed modified downstream dilution correction equation proved more effective than the original equation.However,further testing of this modified downstream dilution correction is needed in other areas,in order to investigate its efficiency further.

Correction of CMPAS Precipitation Products over Complex Terrain Areas with Machine Learning Models

Machine learning models were used to improve the accuracy of China Meteorological Administration Multisource Precipitation Analysis System(CMPAS)in complex terrain areas by combining rain gauge precipitation with topographic factors like altitude,slope,slope direction,slope variability,surface roughness,and meteorological factors like temperature and wind speed.The results of the correction demonstrated that the ensemble learning method has a considerably corrective effect and the three methods(Random Forest,AdaBoost,and Bagging)adopted in the study had similar results.The mean bias between CMPAS and 85%of automatic weather stations has dropped by more than 30%.The plateau region displays the largest accuracy increase,the winter season shows the greatest error reduction,and decreasing precipitation improves the correction outcome.Additionally,the heavy precipitation process’precision has improved to some degree.For individual stations,the revised CMPAS error fluctuation range is significantly reduced.

Strategies for Advancing Road Construction Slope Stability: Unveiling Innovative Techniques for Managing Unstable Terrain

This comprehensive review paper explores various aspects of geotechnical engineering, with a focus on the management of unstable terrains, numerical methods for solving complex soil and consolidation problems, rheological analysis of suspensions and muddy soils, and stability analysis of slopes. It begins by examining the unique physicochemical properties of cohesive sediments, including cohesion and specific surface area. The temporal evolution of deposit concentration and average bed concentration in unstable terrains is discussed, along with settling behavior of isolated particles and hindered settling using empirical equations. Key sedimentation theories, such as Kynch’s theory, and geotechnical consolidation theories, including Terzaghi’s consolidation equation and Gibson’s theory, are presented. The investigation interrelates these theories and principles to offer a holistic view of managing unstable terrains. It also addresses the challenges associated with experimental determination of constitutive relationships and presents alternative simplification methods proposed by researchers. Additionally, it delves into numerical methods for solving nonlinear partial differential equations governing soil behavior, emphasizing the need for numerical frameworks and discussing various techniques and associated challenges. The rheological analysis section covers material flow behavior, rheological behavior models, and the rheological properties of water and cohesive sediment mixtures. Fundamental geotechnical calculations, constitutive laws, and failure criteria are explained, highlighting their relevance in geotechnical engineering applications. This paper provides a multidimensional perspective on geotechnical engineering, offering valuable insights into soil properties, consolidation processes, numerical methods, rheological analysis, and slope stability assessment for professionals in the field.

RANDOM TERRAIN MODEL

In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different types of terrain. In this paper, an algorithm to generate random terrain data is given.

Simulation Calculation and Distribution Characteristics of Terrain Reflected Radiation in Fujian Province

[Objective] The aim was to study the distribution characteristics of terrain reflected radiation in Fujian Province.[Method] Based on solar radiation data,digital elevation model (DEM) and surface meteorological observation data in Fujian Province,plus surface albedo obtained by using remote sensing inversion method,the distribution of terrain reflected radiation in Fujian Province from 1988 to 2007 was simulated,and then its temporal and spatial distribution characteristics was studied.[Result] The simulation results of terrain reflected radiation in Fujian Province was credible.Terrain reflected radiation in Fujian Province was the highest in July (about 160 MJ/m2) and lowest in January (about 60 MJ/m2),and it was obviously higher from May to August compared with other months,while the order of terrain reflected radiation in four seasons was summer>spring>autumn>winter,and complex terrain affected the distribution of terrain reflected radiation greatly,especially in autumn and winter when sun elevation angle was small.In addition,terrain reflected radiation in most areas of Fujian Province was below 100 MJ/m2,and it was high in Ningde,Sanming and Nanping City in northern Fujian,while the maximum value (630 MJ/m2) could be found in Dong’an Island in Xiapu County in Ningde City and had good utilization value.[Conclusion] The study could provide theoretical foundation for the development and utilization of solar energy resources under complex terrain in China.

Intensified haze formation and meteorological feedback by complex terrain in the North China Plain region

华北平原地区冬季雾霾污染频发,本研究结合地面观测,卫星反演和大气动力-化学耦合模拟发现,该地区复杂地形加剧了细颗粒物污染及其与大气边界层之间的相互作用.一方面,复杂地形导致污染在山麓平原积聚,加强迎风坡上升气流.在污染事件中,污染层易被抬升至1-2公里高度,高空较强的氧化能力利于二次气溶胶生成;另一方面,地形导致的污染层抬升和二次生成进一步加强气溶胶-边界层相互作用,削弱垂直扩散并加剧近地面大气污染.

Simulation Analysis on A Rainstorm in Guizhou and Numerical Test about the Terrain Impact

A rainstorm caused by mesoscale convective system (MCS) in Guizhou Province in June 25-26 in 2005 was simulated with the MM5 model. Based on the good simulated results of the MCS developing and the clouds physics process, and by means of reducing the height of Yunnan-Guizhou Plateau and cutting off the middle-east of the Yunnan-Guizhou Plateau on the simulated tests, the question as how the ladder terrain on the west of Yunnan-Guizhou Plateau impact on the rainstorm of Guizhou was studied. The analysis results showed that the second ladder terrain of Yunnan-Guizhou Plateau only affected the development of convective clouds on its backward position,and hardly affected the rain on its upward. The whole terrain of the Yunnan-Guizhou Plateau had a distinct impact not only on the windward slope rainfall of the west of the plateau, but also on the rainfall distribution, intensity and continuing time of the convective clouds on the middle-east of the plateau.

Application of unscented Kalman filter to novel terrain passive integrated navigation system

To improve the navigation accuracy of an autonomous underwater vehicle （AUV）, a novel terrain passive integrated navigation system （TPINS） is presented. According to the characteristics of the underwater environment and AUV navigation requirements of low cost and high accuracy, a novel TPINS is designed with a configuration of the strapdown inertial navigation system （SINS）, the terrain reference navigation system （TRNS）, the Doppler velocity sonar （DVS）, the magnetic compass and the navigation computer utilizing the unscented Kalman filter （UKF） to fuse the navigation information from various navigation sensors. Linear filter equations for the extended Kalman filter （EKF）, nonlinear filter equations for the UKF and measurement equations of navigation sensors are addressed. It is indicated from the comparable simulation experiments of the EKF and the UKF that AUV navigation precision is improved substantially with the proposed sensors and the UKF when compared to the EKF. The TPINS designed with the proposed sensors and the UKF is effective in reducing AUV navigation position errors and improving the stability and precision of the AUV underwater integrated navigation.

Underwater Terrain Positioning Method Based on Least Squares Estimation for AUV

To achieve accurate positioning of autonomous underwater vehicles, an appropriate underwater terrain database storage format for underwater terrain-matching positioning is established using multi-beam data as underwater terrainmatching data. An underwater terrain interpolation error compensation method based on fractional Brownian motion is proposed for defects of normal terrain interpolation, and an underwater terrain-matching positioning method based on least squares estimation（LSE） is proposed for correlation analysis of topographic features. The Fisher method is introduced as a secondary criterion for pseudo localization appearing in a topographic features flat area, effectively reducing the impact of pseudo positioning points on matching accuracy and improving the positioning accuracy of terrain flat areas. Simulation experiments based on electronic chart and multi-beam sea trial data show that drift errors of an inertial navigation system can be corrected effectively using the proposed method. The positioning accuracy and practicality are high, satisfying the requirement of underwater accurate positioning.

Accuracy assessment of ICESat-2 ATL 08 terrain estimates:A case study in Spain

The Ice,Cloud and Land Elevation Satellite-2(ICESat-2),a new spaceborne light detection and ranging(LiDAR)system,was successfully launched on September 15,2018.The ICESat-2 data increase the types of spaceborne LiDAR data archive and provide new control point data for large-scale topographic mapping and geodetic surveying.However,the accuracy of the ATL 08 terrain estimates has not been fully evaluated on a large scale and in complex terrain conditions.This article aims to quantitatively assess the accuracy of ICESat-2 ATL 08 terrain estimates.Firstly,the ICESat-2 ATL 08 terrain estimates were compared with the high-precision airborne LiDAR digital terrain model(DTM),and impacts of acquisition time,vegetation cover type,terrain slope,and season change on the terrain estimation accuracy were analyzed.We get the following conclusions from the analysis:1)the mean and RMSE of the terrain estimates of day acquisitions are 0.22 m and 0.59 m higher than that of night acquisitions;2)the accuracy of the ATL 08 terrain estimates acquired in vegetated areas is lower than those in non-vegetated areas;3)the accuracy of the ATL 08 terrain estimates is inversely proportional to the slope,and the elevation error increases significantly when the terrain slope is larger than 30°;4)in the non-vegetation covered area,the accuracy of the ATL 08 terrain estimates of summer and winter acquisitions has no obvious discrepancy,but in vegetated area,the accuracy of winter acquisitions is significantly better than that of summer acquisitions.This research provides references for the selection and application of ICESat-2 data.

Stability analysis unit and spatial distribution pattern of the terrain texture in the northern Shaanxi Loess Plateau

Terrain texture analysis is an important method of digital terrain analysis in quantitative geomorphological research and in the exploration of the spatial heterogeneity and autocorrelation of terrain features. However, a major issue often neglected in previous studies is the calculation unit of the terrain texture, that is, the stability analysis unit. As the test size increases, the derived terrain textures become increasingly similar so that their differences can be ignored. The test size of terrain texture is defined as the stability analysis unit. This study randomly selected 48 areas within the Loess Plateau in northern Shaanxi in China as the study sites and used the gray level co-occurrence matrix to calculate the terrain texture. The stability analysis unit of the terrain texture was then extracted, and its spatial distribution pattern in the Loess Plateau was studiedusing spatial interpolation method. Four terrain texture metrics, i.e., homogeneity, energy, correlation, and contrast, were extracted on the basis of the stability analysis unit, and the spatial variation patterns of these parameters were studied. Results showed that the spatial distribution pattern and the terrain texture metrics reflected a trend of high–low–high from north to south, which correlated with the spatial distribution of the landforms at the Loess Plateau. In addition, the terrain texture measures was significantly correlated with the terrain factors of gully density and slope, and this relationship showed that terrain texture measures based on the stability analysis unit could reflect the basic characteristics of terrain morphology. The stability analysis unit provided a reasonable analytical scale for terrain texture analysis and could be used as a measure of the regional topography to accurately describe basic terrain characteristics.

Terrain Rendering LOD Algorithm Based on Improved Restrictive Quadtree Segmentation and Variation Coefficient of Elevation

Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.

Effects of Terrain-Induced Turbulence on Wind Turbine Blade Fatigue Loads

Recently, the issue has surfaced that the availability factors for wind farms built on complex terrain are lower than the originally projected values. In other words, problems have occurred such as extreme decreases in generation output, failures of components inside and outside wind turbines including yaw motors and yaw gears, and cracking on wind turbine blades. As one of the causes of such issues, the effects of wind turbulence (terrain-induced turbulence) have been pointed out. In this study, we investigated the effects of terrain-induced turbulence on the structural strength of wind turbines through the measurement of strains in wind turbine blades and the analysis of wind data in order to establish a method for optimal wind turbine deployment that uses numerically simulated wind data and takes the structural strength of wind turbines into consideration. The investigation was conducted on Wind Turbine #10 of the Kushikino Reimei Wind Farm (in operation since Nov. 2012) in cooperation with Kyudenko New Energy Co., Ltd. Subsequently, we conducted numerical wind simulations (diagnoses of terrain-induced turbulence) to study the effects of the properties of airflow on the structural strength of wind turbines. For these simulations, the natural terrain version of the RIAM-COMPACT software package, which is based on large eddy simulation (LES), was used. The numerical simulations successfully reproduced the characteristics of the wind conditions and the structure of the three-dimensional airflow. These results enabled us to determine the threshold value for a turbulence index to be used for optimal wind turbine deployment planning that utilizes quantitative data from simulations with the natural terrain version of the RIAM-COMPACT software package.

An Incremental LOD Method Based on Grid and Its Application in Distributed Terrain Visualization

Incremental LOD can be transmitted on the network as a stream, then users on the clients can easily catch the skeleton of terrain without downloading all the data from the server. Detailed information in a local part can be added gradually when users zoom it in without redundant data transmission in this procedure. To do this, an incremental LOD method is put forward according to the regular arrangement of grid. This method applies arbitrary sized grid terrains and is not restricted to square ones with a side measuring 2 k + 1 samples. Maximum height errors are recorded when the LOD is preprocessed and it can be visualized with the geometrical Mipmaps to reduce the screen error.

基于Terrain model的三角化运算法则

针对目前出现的大量的物体表面扫描数据的分割与插值方法,本文提出了一个新的适合Terrain model及其相近的三角化运算法则,并给出了部分运算程序代码。该运算法则经检验与运用,具有很好的实用性。