水煤浆添加剂TS-M1对几种煤成浆效果的试验研究

为了考察复合高效水煤浆添加剂TS-M1在水煤浆制浆中的整体成浆效果,以4种特定的煤种为制浆对象,对煤浆质量分数、黏度、流动性及稳定性等进行了量化分析。试验结果及现场应用情况表明:针对煤气化项目现场的应用条件及4种特定煤种,复合高效水煤浆添加剂TS-M1在常规添加量1‰~4.5‰范围内,可制得最高成浆质量分数分别为64%、63.5%、65%和68%的水煤浆,同时能保持良好的煤浆黏度、流动性及稳定性。

Highly reinforce the interface stability using 2-Phenyl-1H-imidazole-1-sulfonate electrolyte additive to enhance the high temperature performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/graphite batteries

This work develops 2-Phenyl-1H-imidazole-1-sulfonate(PHIS)as a multi-functional electrolyte additive for H2O/HF scavenging and film formation to improve the high temperature performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/graphite batteries.After 450 cycles at room temperature(25℃),the discharge capacity retentions of batteries with blank and PHIS-containing electrolyte are 56.03%and 94.92%respectively.After 230 cycles at high temperatures(45℃),their values are 75.30%and 88.38%respectively.The enhanced electrochemical performance of the batteries with PHIS-containing electrolyte is supported by the spectroscopic characterization and theoretical calculations.It is demonstrated that this PHIS electrolyte additive can facilitate the construction of the electrode interface films,remove the H2O/HF in the electrolyte,and improve the electrochemical performance of the batteries.This work not only develops a sulfonate-based electrolyte but also can stimulate new ideas of functional additives to improve the battery performance.

双苄叉丙酮与丙二腈[5+1]合成环己酮类化合物的研究

环己酮是重要的化工原料,是生产尼龙6和尼龙66重要中间体,环己酮结构还存在于自然界中,是一类具有多种生物活性的药物骨架。本论文以双苄叉丙酮与丙二腈为原料,以DMF(N,N-二甲基甲酰胺)为溶剂,K_(2)CO_(3)为碱,且在无催化剂的条件下发生[5+1]环化反应,合成了一系列多取代环己酮类化合物,其结构经1 H NMR,^(13)C NMR、HR-MS(ESI)和IR表征,并对该合成反应机理进行了探讨。该合成方法具有宽泛的底物普适性,条件温和,较高的原子经济性和收率高等优势。

Effect of EDTA and NH_4Cl additives on electrodeposition of Zn-Ni films from choline chloride-based ionic liquid

Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two additives on electrodeposition behavior, composition, morphology, and corrosion performance of the Zn-Ni alloys were investigated. The electrodeposition behaviors of Zn-Ni alloy revealed by the cyclic voltammetry show that the addition of EDTA to the Zn-Ni electrolyte enhances the Zn incorporation into the alloy film while the addition of NH4C1 produces an opposite effect by suppressing Zn incorporation into the film. With an increase of EDTA concentration in the electrolyte, the Zn content of the Zn-Ni films increases, while the grain size of the deposits and the current efficiency of the plating process decrease. The increase of NH4C1 concentration in the electrolyte would significantly refine the grain size of the electrodeposited Zn-Ni films, reduce the Zn content and increase the cathodic current efficiency. The corrosion testing indicates that the barrier corrosion resistances of Zn-Ni films electrodeposited from NHnC1 containing electrolytes are superior to those electrodeposited from EDTA-containing electrolytes, which in turn are superior to those electrodeposited from additive-free electrolytes.

Studies on New Additions to 5-Methoxy-2 (5H)-Furanone: 1, 4-Addition of Grignard Reagents, and 1,3-Dipolar Cycloaddition of Silyl Nitronates

1,4-Addition reaction of Grignard's reagent to 5-methoxy-2(5H)-furanone 1 was accomplished. which provided a new possible route for synthesizing beta -alkyl-Y-alkyloxy-Y-butyrolactone. A novel concise method of preparing fused heterocyclic compounds was offered by 1,3-dipolar cycloaddition reaction of silyl nitronates to 1.

Synthesis of a New Chiral Ligand Containing 1, 5-Diazacyclooctane and the Application in Diethyl Zinc Addition to Benzaldehyde

A new chiral tetradentate ligand (S, S)-1, 5-bis (4-benzyloxazolin-2-yl-methyl)-1, 5-diazacyclo-octane 1 has been synthesized and the application of 1 as catalyst in the enantioselective addition of diethyl zinc to benzaldehyde is also described.

Influence of Al-5Ti-1B master alloy addition on the grain size of AZ91 alloy

The mechanical properties of castings depend on the grain size.There is evidence that titanium and boron(Al-5Ti-1B master alloy)affect the grain size of magnesium alloys.Here,the influence of the addition of 0-1 wt.%of Al-5Ti-1B master alloy on the grain size of AZ91 magnesium alloy was investigated.Melting of the alloy was performed in steel and corundum crucibles.To study the effect of cooling rate on grain size,cylindrical samples were cast in steel and fireclay molds.The Al-5Ti-1B master alloy addition did not change the phase composition of the AZ91 alloy.This study demonstrates that the addition of Al-5Ti-1B did not contribute to the grain refinement of the AZ91 alloy,but rather led to its coarsening for samples cast in both the steel and fireclay molds.Increasing the holding time after the addition of the Al-5Ti-1B master alloy from 15 to 110 minutes also did not lead to significant grain coarsening.The mechanical properties of the AZ91 alloy samples slightly improved after Al-5Ti-1B addition.

“Anti-Michael” and Michael Additions in the Reactions of 2-Arylmethyliden-1,3-Indandiones with 2-Aminothiophenol

A novel 2-indano[2,3b]-2-ferrocenyl- and 2-indano[2,3b]-2-(p-methoxy-phenyl)[1,5]benzo-2,5-dihydrothiazepine 5a,b (addition Michael/cyclization) (~30.32%), indano[2,3b]-2-ferrocenyl- and 2-(p-methoxyphenyl)[1,4] benzothiazine 4a,b (addition “anti-Michael”/cyclization) (~45.43%), respectively, were obtained by the condensation of 2-ferrocenyl-and 2-(p-methoxy-phenyl)methyliden-1,3-indandiones 1a,b with o-aminothiophenol 2 in the presence of AcOH and HCl. A new “anti-Michael” addition reaction of 1,4-bis-heteronucleophile 2 into 2-arylmethyliden-1,3-indandiones was reported. As a result of this reaction the product 1a,b was obtained. The structures of the resultant compounds were elucidated by IR, 1H and 13C NMR spectroscopy, mass spectrometry, elemental and X-ray diffraction analysis. The in vitro antitumor activity of the obtained products was researched using the following human cancer cell lines: glioblastoma (CNS U-251), prostatic adenocarcinoma (PC-3), chronic myelogenous leukemia (K562), colorectal adenocarcinoma (HCT-15), mammary adenocarcinoma (MCF-7), and small cell lung cancer (SKLU) and the sulforhodamine B (SRB) method. Among these new compounds some thiazine and thiazepine derivatives showed compelling in vitro antitumor effects on cell lines K-562, HCT-15, SKLU-1 and MCF-7.

An expeditious synthesis of isoxazoline using cetyltrimethylammonium cerium nitrate:A phase transferring oxidative 1,3-dipolar cycloaddition

An expeditious and effective method for synthesis of isoxazoline from aldoximes and activated alkenes using cetyltrimethylammonium cerium nitrate at room temperature is described.Reaction was completed within short time period in high yields at room temperature.

The Reductive Addition Reaction of Substituted 2-Chloromethyl-1,3,4-oxadiazole to Aldehydes and Ketones Promoted by Samarium Diiodide

1-（β-Hydroxyalkyl）-l,3,4-oxadiazole derivatives were synthesized via reductive addition reactions of 2-chloromethyl-l,3,4-oxadiazole with carbonyl compounds under mild conditions promoted by SmI2.

The Addition Reaction of p-Chlorobenzaldoxime Dehydrodimer with 1,3-Dienes

The addition reaction of p chlorobenzaldoxime dehydrodimer and 1,3 dienes in refluxing chloroform gives linear 1,4 addition products. The reaction is probably a free radical process.

Quantum Chemical Study of the Leveling Property of Organic Additives for Ni Electroplating

The geometries of the molecules of eight organic additives were optimized and the net charge,E HOMO andE LUMO were obtained using AM method, respectively. The result shows that there is the correlation between the leveling property and the frontier orbital energy levels of these additives, and the adsorption models and leveling mechanics were discussed. The rule between the frontier orbital energy levels and the leveling property is verified by the experiments.

STUDY ON THE ADDITION REACTION OF 1-IODO-4-CHLOROPERFLOROBUTANE TO 1-HEXENE UNDER REDUCTIVE CONDITIONS

Promoted by various reductants,the addition of 1-iodo-4-chloro- perfluorobutane to 1-hexene giving 1:1 adduct is reported.Based on these facts,several new redox systems are proposed.

Effects of A1 Additions on Microstructure and Mechanical Properties of MoSi_2

The effects of Al additions on the microstructure and mechanical properties of MoSi2 have been studied. With the A1 additions from 2.5 wt pct to 5 wt pct, the siliceous grain boundary phase in hot pressed samples was eliminated because of the formation of Al2O3 particles. It was shown that Al and SiO2 reacted at 860℃. During the reaction, A1 atoms were mainly transferred to Al2O3 particles, and to some extent, diffused into MoSi2 grains. Both the toughness and strength of Al containing composites exceeded those of pure MoSi2 material. Bending strength and fracture toughness reach the highest value of 350 MPa, 4.05 MPa.m1/2, respectively, at ambient temperature when Al addition was of 3.5 wt pct.

Synthetic Studies on 1-Amino-1-Cyclopropane-Carboxylic Acid( Ⅰ )——The Cyclopropanation via Addition-Elimination Reactions

Various addition-elimination approaches have been explored for diastereoselective construction of 1-amino- 1-cyclopropane-carboxylic acid (ACPC) derivatives, and the desired product was obtained from a reaction of cyclo(NAc-L-Val-NAc-Gly) and methyl α-bro-moacrylate under protonic solvent.

丙酮酸-1-^(13)C的合成研究

磁共振成像(magnetic resonance imaging,MRI)因其灵敏度低而临床应用受限,超极化技术通过增强分子MRI信号克服这一限制。目前,丙酮酸-1-^(13)C是最主要的超极化生物探针,被广泛应用于超极化MRI研究。本研究以13 CO_(2)为标记原料,通过格氏试剂亲核加成反应和臭氧化反应的“两步法”合成丙酮酸-1-^(13)C,合成收率为71.5%,产品纯度>98%;同时对臭氧化反应进行调控,实现“一锅法”合成丙酮酸-1-^(13)C的方法,合成收率为70.5%,产品纯度>98%。丙酮酸-1-^(13)C的合成可为开展磁共振成像研究提供支持。

基于课堂革命的“增材制造技术”课程教学改革探索

基于课堂革命的大背景,以“增材制造技术”课程为例,分别从教学环境、教学内容、教学方法、考核方式四个维度阐述了课程教学改革中的具体做法与实施情况。对标典型工作岗位技能,结合“1+X”证书技能考核点,重组了以工作过程为导向的教学内容。通过课堂革命实践,显著提升了教学效果。

1000kV柱式CVT的设计要点及检测

1000kV柱式电容式电压互感器(CVT)是我国晋东南—南阳—荆门1000kV特高压交流试验示范工程的重要设备,它的设计不仅要考虑特高压绝缘问题,同时要兼顾误差特性、安装特性等。根据我国1000kV特高压输电工程的需要,在对比柱式结构CVT、SF6气体绝缘电磁式电压互感器、电子式电压互感器(EVT)优缺点基础上,对我国1000kV交流特高压工程用电压互感器进行了选型;分析了1000kV柱式CVT的设计原理、参数选择、结构要求、现场检测方法及附加误差,同时提出1000kV标准电压互感器的结构设计。1000kV柱式CVT的试制成功证明,1000kVCVT符合对1000kV特高压电网电压测量和保护的要求,为我国晋东南-南阳-荆门1000kV特高压交流试验示范工程的顺利进行提供了保障。

6,7-二氢-5H-1-氮茚的合成研究

以价廉易得的己二酸二甲酯为原料,在甲醇钠的催化下,通过Dieckmann缩合反应得到2-氧代环戊烷羧酸甲酯,收率82.2%;2-氧代环戊烷羧酸甲酯再与丙烯腈在40%(质量比)苄基三甲基氢氧化铵甲醇溶液存在下,经Michael加成制得1-(2-氰乙基)-2-氧代环戊烷羧酸甲酯,收率82.5%;进一步酸性脱羧得到3-(2-氧代环戊基)丙腈,收率84.0%;将脱羧产物通入装有Ni-Cu/γ-Al2O3催化剂的固定床反应器中,催化环合最终得到6,7-二氢-5H-1-氮茚,反应总收率33.8%.

3-(CH_2)_nCO_2C_2H_5-1,5-苯并硫氮杂的合成、晶体结构及抑真菌活性

为了寻找具有更高抗真菌活性的杂类化合物并对高活性的杂衍生物A进行构效关系研究,设计合成了38个3-(CH2)nCO2C2H5-1,5-苯并硫氮杂衍生物6和7(n=1,2),其结构经核磁共振波谱、质谱、红外光谱及元素分析等确证;并采用X射线单晶衍射技术测定了目标化合物的立体结构,发现其分子中的七元杂环是扭曲的船式构象.实验还考察了合成化合物的抑真菌活性,结果表明,当乙氧羰基烷基[(CH2)nCO2C2H5]在七元杂环的3位时杂的活性降低;将Lewis CeCl3.7H2O-NaI用于催化含硫化合物与α,β-不饱和酮的迈克尔加成反应,发现该催化剂能有效促进高位阻α,β-不饱和酮与邻氨基苯硫酚的迈克尔加成;同时研究了中间体5的分子内缩合反应,发现TiCl4是合成Schiff碱非常有效的促进剂.