Geomorphic signatures and active tectonics in western Saurashtra,Gujarat,India

Active tectonics in an area includes ongoing or recent geologic events.This paper investigates the tectonic influence on the subsidence,uplift and tilt of western Saurashtra through morphotectonic analysis of ten watersheds along with characteristics of relief and drainage orientation.Watersheds 7-9 to the north(N)are tectonically active,which can be linked with the North Kathiawar Fault System(NKFS)and followed by watersheds 6,10,1,4 and 5.Stream-length gradient index and sinuosity index indicate the effect of tectonic events along the master streams in watersheds 6-9.Higher R^(2)values of the linear curve fit for watershed 7 indicate its master stream is much more tectonically active than the others.The R^(2)curve fitting model and earthquake magnitude/depth analysis confirm the region to be active.The reactivation of the NKFS most likely led to the vertical movement of western Saurashtra.

The Middle and Lower Cambrian salt tectonics in the central Tarim Basin,China:A case study based on strike-slip fault characterization

Due to the considerable depth of the salt layers and the lack of calibration by exploratory drilling,the interpretation of the Middle and Lower Cambrian salt formations in the central Tarim Basin poses a challenge.In this paper,we apply the coupling and decoupling deformation theory in salt tectonics to analyze the No.7 fault mapped in the seismic datasets by the response characteristics of the Middle and Lower Cambrian layers.By quantifying the stratigraphic framework of the Middle and Lower Cambrian strata,we define the position of the salt layer with the seismic data.Structural decoupling is observed in the Middle and Lower Cambrian sequences in the Shuntuoguole Low Uplift,while deformation coupling is observed in these two sequences in the Shaya Uplift.

Initiation of plate tectonics in the Hadean: Eclogitization triggered by the ABEL Bombardment

When plate tectonics began on the Earth has been long debated and here we argue this topic based on the records of Earth-Moon geology and asteroid belt to conclude that the onset of plate tectonics was during the middle Hadean（4.37-4.20 Ga）. The trigger of the initiation of plate tectonics is the ABEL Bombardment, which delivered oceanic and atmospheric components on a completely dry reductive Earth, originally comprised of enstatite chondrite-like materials. Through the accretion of volatiles, shock metamorphism processed with vaporization of both CI chondrite and supracrustal rocks at the bombarded location, and significant recrystallization went through under wet conditions, caused considerable eclogitization in the primordial continents composed of felsic upper crust of 21 km thick anorthosite, and 50 km or even thicker KREEP lower crust. Eclogitization must have yielded a powerful slab-pull force to initiate plate tectonics in the middle Hadean. Another important factor is the size of the bombardment. By creating Pacific Ocean class crater by 1000 km across impactor, rigid plate operating stagnant lid tectonics since the early Hadean was severely destroyed, and oceanic lithosphere was generated to have bi-modal lithosphere on the Earth to enable the operation of plate tectonics.Considering the importance of the ABEL Bombardment event which initiated plate tectonics including the appearance of ocean and atmosphere, we propose that the Hadean Eon can be subdivided into three periods：（1） early Hadean（4.57-4.37 Ga）,（2） middle Hadean（4.37-4.20 Ga）, and（3） late Hadean（4.20-4.00 Ga）.

Relative active tectonics evaluation using geomorphic and drainage indices, in Dadra and Nagar Haveli, western India

The present study area,Dadra and Nagar Haveli,contains several lineaments and traces of active faults.The various aspect of the geomo rphic analysis,i.e.,stream length(SL) gradient,hypsometric integral(HI),basin shape(BS),valley floor(VF),have been applied to evaluate the relative index of active tectonics(RIAT) of the Damanganga watershed.The high and low zones of tectonic activity have been identified based on the geomorphic analysis of the watershed.After evaluation of all indices,three classes,class IIhigh(1.3 ≤RIAT <1.5),class Ⅲ-moderate(1.5 ≤RIAT <1.8),and class Ⅳ-low(1.8 ≤RIAT),have been obtained to outline the degree/gradation of comparative tectonic activities in the study area.The appraised outcome of the RIAT dispersal is also well reinforced by the geomorphic evidence in the field.The collective outcomes of geomorphic evidence,such as stream deflection and analysis of lineament,deflection of streams,and geomorphic indices,conceal that the Damanganga watershed is affected by tectonic activity.

Gravitational Tectonics versus Plate Tectonics in the Himalayan Intermontane Basins: NW Himalaya

The intermontane basins are some of the critical regions to investigate the formation,growth,and development of basins during the collisional orogenesis,and in the NW Himalaya several such basins are observed to have formed during the latest phase of the ongoing collision between India and Eurasia(Burbank and Johnson,1982).

Review on study of seismotectonics in China

This paper reviews briefly the progresses made during the last four years (1999~2002) in study of seismotectonics in China, especially appraises the achievements in the fields of the crustal and upper mantles structure, the active faults and tectonic setting of large earthquakes, the crustal deformation, and the numerical simulation. Most earthquakes occurred in China belong to continental earthquakes. Therefore, Chinese seismologists pay more attention to the continental earthquakes. Based on improvements of the observation systems in China during the ninth Five-Year Plan, the studies on seismotectonics have achieved great progresses.

MY WORK ON REGIONAL GEOTECTONICS & PLATE TECTONICS

I graduated as a geology major from the former Zhongyang (National) University in 1938 and then worked as a research scholar at Kings College in the University of London from 1949 to 1951.I was one of the pioneers in plate tectonic and terrain tectonic studies in China,devoting myself to the regional geotectonics and plate tectonics of southern China for several decades,making significant achievements in these fields.Throughout the life-long course of my academic career,I have published and coauthored some 120 research papers or monographic books at home or abroad.

Late Mesozoic basin and range tectonics and related magmatism in Southeast China

During the Late Mesozoic Middle Jurassic--Late Cretaceous, basin and range tectonics and associated magmatism representative of an extensional tectonic setting was widespread in southeastern China as a result of Pacific Plate subduction. Basin tectonics consists of post-orogenic （Type I） and intra-continental extensional basins （Type II）. Type I basins developed in the piedmont and intraland during the Late Triassic to Early Jurassic, in which coarse-grained terrestrial clastic sediments were deposited. Type II basins formed during intra-continental crustal thinning and were characterized by the development of grabens and half-grabens. Graben basins were mainly generated during the Middle Jurassic and were associated with bimodal volcanism. Sediments in half-grabens are intercalated with rhyolitic tufts and lavas and are Early Cretaceous in age with a dominance of Late Cretaceous-Paleogene red beds. Ranges are composed of granitoids and bimodal volcanic rocks, A-type granites and dome-type metamorphic core complexes. The authors analyzed lithological, geochemical and geochronological features of the Late Mesozoic igneous rock assemblages and proposed some geodynamical constraints on forming the basin and range tectonics of South China. A comparison of the similarities and differences of basin and range tectonics between the eastern and western shores of the Pacific is made, and the geo- dynamical evolution model of the Southeast China Block during Late Mesozoic is discussed. Studied results suggest that the basin and range terrane within South China developed on a pre-Mesozoic folded belt was derived from a polyphase tectonic evolution mainly constrained by subduction of the western Pacific Plate since the Late Mesozoic, leading to formation of various magmatism in a back-arc exten- sional setting. Its geodynamic mechanism can compare with that of basin and range tectonics in the eastern shore of the Pacific. Differences of basin and range tectonics between both shores of the Pacific, such as mantle plume formation, scales of extensional and igneous rock assemblages and the age of basin and range tectonics, were caused mainly by the Yellowstone mantle plume in the eastern shore of the Pacific.

The boring billion? - Lid tectonics, continental growth and environmental change associated with the Columbia supercontinent

The evolution of Earth＇s biosphere,atmosphere and hydrosphere is tied to the formation of continental crust and its subsequent movements on tectonic plates.The supercontinent cycle posits that the continental crust is periodically amalgamated into a single landmass,subsequently breaking up and dispersing into various continental fragments.Columbia is possibly the first true supercontinent,it amalgamated during the 2.0-1.7 Ga period,and collisional orogenesis resulting from its formation peaked at 1.95-1.85 Ga.Geological and palaeomagnetic evidence indicate that Columbia remained as a quasi-integral continental lid until at least 1.3 Ga.Numerous break-up attempts are evidenced by dyke swarms with a large temporal and spatial range; however,palaeomagnetic and geologic evidence suggest these attempts remained unsuccessful.Rather than dispersing into continental fragments,the Columbia supercontinent underwent only minor modifications to form the next supercontinent （Rodinia） at 1.1 -0.9 Ga; these included the transformation of external accretionary belts into the internal Grenville and equivalent collisional belts.Although Columbia provides evidence for a form of ‘lid tectonics’,modern style plate tectonics occurred on its periphery in the form of accretionary orogens.The detrital zircon and preserved geological record are compatible with an increase in the volume of continental crust during Columbia＇s lifespan; this is a consequence of the continuous accretionary processes along its margins.The quiescence in plate tectonic movements during Columbia＇s lifespan is correlative with a long period of stability in Earth＇s atmospheric and oceanic chemistry.Increased variability starting at 1.3 Ga in the environmental record coincides with the transformation of Columbia to Rodinia; thus,the link between plate tectonics and environmental change is strengthened with this interpretation of supercontinent history.

Active Tectonics of the Longmen Shan Region on the Eastern Margin of the Tibetan Plateau

There is a massive amount of geomorphic evidence for active tectonics in the Longmen Shan at the eastern margin of the Tibetan plateau. We have surveyed some typical geomorphic markers including the Wenchuan-Maowen, Beichuan-Yingxiu and Pengxian-Guanxian faults, terrace offsets, scarps, fault-controlled saddles, dextral shutter ridges, dextral channel offsets, graben, shatter belts, and pull-apart basins. Electron spin resonance （ESR） and thermoluminescence（TL） ages were obtained using silty sand taken from below the surface of the sediments. According to these data, we calculated the rates of thrusting and strike-slip, and the results indicate that Cenozoic tectonic shortening at the plateau margin is minor with the rate of thrusting less than 1.10 mm/a and the rate of strike-slipping less than 1.46 mm/a. The Longmen Shan is a zone of NNE-trending dextral shear with slip-dip ratio of 6：1-1.3：1. From NW to SE, the thrust component becomes smaller, whereas the strike-slip component becomes larger.

A planet in transition:The onset of plate tectonics on Earth between 3 and 2 Ga?

Many geological and geochemical changes are recorded on Earth between 3 and 2 Ga.Among the more important of these are the following:(1)increasing proportion of basalts with"arc-like"mantle sources;(2)an increasing abundance of basalts derived from enriched(EM)and depleted(DM)mantle sources;(3)onset of a Great Thermal Divergence in the mantle;(4)a decrease in degree of melting of the mantle;(5)beginning of large lateral plate motions;(6)appearance of eclogite inclusions in diamonds;(7)appearance and rapid increase in frequency of collisional orogens;(8)rapid increase in the production rate of continental crust as recorded by zircon age peaks;(9)appearance of ophiolites in the geologic record,and(10)appearance of global LIP(large igneous province)events some of which correlate with global zircon age peaks.All of these changes may be tied directly or indirectly to cooling of Earth's mantle and corresponding changes in convective style and the strength of the lithosphere,and they may record the gradual onset and propagation of plate tectonics around the planet.To further understand the changes that occurred between 3 and 2 Ga,it is necessary to compare rocks,rock associations,tectonics and geochemistry during and between zircon age peaks.Geochemistry of peak and inter-peak basalts and TTGs needs to be evaluated in terms of geodynamic models that predict the existence of an episodic thermal regime between stagnant-lid and plate tectonic regimes in early planetary evolution.

Stagnant lid tectonics:Perspectives from silicate planets,dwarf planets, large moons,and large asteroids

To better understand Earth's present tectonic style-plate tectonics—and how it may have evolved from single plate(stagnant lid) tectonics, it is instructive to consider how common it is among similar bodies in the Solar System. Plate tectonics is a style of convection for an active planetoid where lid fragment(plate) motions reflect sinking of dense lithosphere in subduction zones, causing upwelling of asthenosphere at divergent plate boundaries and accompanied by focused upwellings, or mantle plumes;any other tectonic style is usefully called "stagnant lid" or "fragmented lid". In 2015 humanity completed a 50+ year effort to survey the 30 largest planets, asteroids, satellites, and inner Kuiper Belt objects,which we informally call "planetoids" and use especially images of these bodies to infer their tectonic activity. The four largest planetoids are enveloped in gas and ice(Jupiter, Saturn, Uranus, and Neptune)and are not considered. The other 26 planetoids range in mass over 5 orders of magnitude and in diameter over 2 orders of magnitude, from massive Earth down to tiny Proteus; these bodies also range widely in density, from 1000 to 5500 kg/m^3. A gap separates 8 silicate planetoids with ρ = 3000 kg/m^3 or greater from 20 icy planetoids(including the gaseous and icy giant planets) with ρ = 2200 kg/m^3 or less. We define the "Tectonic Activity Index"(TAI), scoring each body from 0 to 3 based on evidence for recent volcanism, deformation, and resurfacing(inferred from impact crater density). Nine planetoids with TAI = 2 or greater are interpreted to be tectonically and convectively active whereas 17 with TAI <2 are inferred to be tectonically dead. We further infer that active planetoids have lithospheres or icy shells overlying asthenosphere or water/weak ice. TAI of silicate(rocky) planetoids positively correlates with their inferred Rayleigh number. We conclude that some type of stagnant lid tectonics is the dominant mode of heat loss and that plate tectonics is unusual. To make progress understanding Earth's tectonic history and the tectonic style of active exoplanets, we need to better understand the range and controls of active stagnant lid tectonics.

Jurassic Tectonics of North China:A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thickening in this part of the NCB. The Jurassic deformation patterns, different tectonic systems and multi-directional contractions in North China recorded far-field effects of synchronous convergences, toward the East Asian continent, of three different plates, the Siberian plate in the north, the paleo-Pacific oceanic plate in the east and the Lhasa block in the southwest. This Middle to Late Jurassic intraplate orogenesis and pervasive shortening deformation preceded lithospheric attenuation and thinning in East China, which most possibly started by the Early Cretaceous around 135 Ma.

The Impact of the Linked Factors of Provenance,Tectonics and Climate on Potash Formation:An Example from the Potash Deposits of Lop Nur Depression in Tarim Basin,Xinjiang,Western China

Potash deposits commonly accumulate in highly restricted settings at the final stage of brine evaporation. This does not mean that potash deposits are formed simply as a result of the evaporation concentration of seawater or lake water, but rather as a coupling result of particular provenance, tectonics and climate activities. In this paper, we focus on the formative mechanism of the potash deposits of Lop Nur depression in Tarim Basin to interpret the detailed coupling mechanism among provenance, tectonics and climate. In terms of the provenance of Lop Nur Lake, the water of the Tarim River which displays ＂potassium-rich＂ characteristics play an important role. In addition, the Pliocene and Lower-Middle Pleistocene clastic beds surrounding Lop Nur Lake host a certain amount of soluble potassium and thus serves as ＂source beds＂ for potash formation. During the late Pliocene, the Lop Nur region has declined and evolved into a great lake from the previous piedmont and diluvial fan area. Since the mid Pleistocene, the great-united Lop Nur Lake has been separated and has generated a chain system consisting of Taitema Lake, Big Ear Lake and Luobei Lake which has turned into the deepest sag in Lop Nur Lake. Dry climate in Lop Nur region has increased since the Pliocene, and became extreme at the late Pleistocene. The study implies that potash formation in Lop Nur Lake depends on the optimal combination of extreme components of provenance, tectonics and climate during a shorter-term period. The optimal patterns of three factors are generally characterized by the long-term accumulation and preliminary enrichment of potassium, the occurrence of the deepest sub-depression and the appearance of an extremely arid climate in Lop Nur region. These factors have been interacting synergistically since the forming of the saline lake and in the later stages strong ＂vapor extraction＂ caused by extremely arid climate is needed to trigger large scale mineralization of potash deposits.

Control of Deep Tectonics on the Superlarge Deposits in China

Seventy-three large-superlarge deposits in China were formed in 4 metallogenic epochs, and located in 6 metallogenic domains. By combing their time-space distribution and the relevant data of crustal thickness, we discuss the control conditions of deep tectonics on superlarge deposits. The various spatial variation of the crustal thickness where deposits locate is closely related to their different tectonic setting. The crustal thickness of the region where deposits are in the Precatnbrian metallogenic epoch is 37.1 km and shows double-peak distribution, which is related to the different tectonic-mineralization processes in the Tarim-North China and Yangtze metallogenic domains. The crustal thickness of the region where deposits are in the Paleoproterozoic metallogenic epoch is 43.4 km and shows normal distribution, which is the result of 'pure' mineralization setting. The crustal thickness of the region where deposits are in the Late Palaeozoic-Early Mesozoic metallogenic epoch is about 41.2 km and shows multi-peak distribution, which can be related with dispersing distribution in the metallogenic domain of these superlarge deposits. The crustal thickness of the region where deposits are in the post-Indosinian metallogenic epoch is 37.3 km, and shows skew distribution, which resulted from different tectonic settings in eastern and western China.

Uniform Strike-Slip Rate along the Xianshuihe-Xiaojiang Fault System and Its Implications for Active Tectonics in Southeastern Tibet

Recent studies on the Xianshuihe-Xiaojiang fault system suggest that the Late Quaternary strike-slip rate is approximately uniform along the entire length of the fault zone, about 15±2 mm/a. This approximately uniform strike slip rate strongly supports the clockwise rotation model of the southeastern Tibetan crust. By approximating the geometry of the arc-shaped Xianshuihe-Xiaojiang fault system as a portion of a small circle on a spherical Earth, the 15±2 mm/a strike slip rate corresponds to clockwise rotation of the Southeastern Tibetan Block at the （5.2±0.7）×10^-7 deg/a angular velocity around the pole （21°N, 88°E） relative to the Northeast Tibetan Block. The approximately uniform strike slip rate along the Xianshuihe-Xiaojiang fault system also implies that the Longmeushan thrust zone is not active, or at least its activity has been very weak since the Late Quaternary. Moreover, the total offset along the Xiaushuihe-Xiaojiang fault system suggests that the lateral extrusion of the Southeastern Tibetan Block relative to Northeastern Tibetan Block is about 160 km and 200-240 km relative to the Tarim-North China block. This amount of lateral extrusion of the Tibetan crust should have accommodated about 13-24% convergence between India and Eurasia based on mass balance calculations. Assuming that the slip rate of 15±2 mm/a is constant throughout the entire history of the Xianshuihe-Xiaojiang fault system, 11±1.5 Ma is needed for the Xianshuihe-Xiaojiang fault system to attain the 160 km of total offset. This implies that left-slip faulting on the Xianshuihe-Xiaojiang fault system might start at 11±1.5 Ma.

Collision Tectonics between the Tarim Block(Basin)and the Northwestern Tibet Plateau:New Observations from a Multidisciplinary Geoscientific Investigation in the Western Kunlun Mountains

New results from deep seismic reflection profiling, wide-angle reflection-refraction profiling and broadband seismic experiments reveal that a series of south-dipping reflectors occur on the southern margin of the Tarim block (basin). However, it is these south-dipping structures that are intercepted by another series of north-dipping reflectors at depths from 30 to about 150 km beneath the foreland of the W Kunlun Mountains. No evidence from the above geophysical data as well as geochemical and surface geological data indicate the southward subduction of the Tarim block beneath the W Kunlun Mountains (NW Tibet plateau), forming the so-called “two-sided subduction” model for the Tibet plateau as proposed by previous studies. So the authors infer that the tectonic interaction between the Tarim block and the W Kunlun block was chiefly affected by a “horizontal compression in opposite directions”, which brought about “face-to-face contact” between these two lithospheric blocks and led to the thickening, shortening and densifying of the lithosphere. Hence a “delamination” was formed due to the gravitational instability created by the thickening and densifying; then alkaline basic volcanic rocks (mainly shoshonite series) was erupted along the northern margin of the Tibet plateau owing to the delamination. This inference for the formation of the alkaline basic volcanics has been confirmed by recent geochemical and petrological studies in Tibet, indicating that different contacts control different magmatic activities: the alkali basalts are always developed in the “horizontal shortening boundary (contact)” on the northern margin of the Tibet plateau, while the muscovite granite and two-mica granite (leucogranite) in the “subductional contact” on the southern margin of the Tibet plateau.

Characteristics and evolution of strike-slip tectonics of the Liaohe Western Sag,Bohai Bay Basin

Because of its rich oil and gas resources and the special tectonic location of the Liaohe Western Sag （the Tanlu Fault traverses the sag）, Bohai Bay Basin, a detailed study of its strike-slip tectonics is significant in revealing the sag＇s tectonic evolution, its control on hydrocarbon accumulation, and the activity history of the northern section of the Tanlu Fault in the Cenozoic. Through systematic structure analysis of 3D seismic data of the Liaohe Western Sag, combined with balanced section analysis, a variety of structural features in relation to right-lateral strike-slip faults, such as echelon normal faults, ＂comb＂ structure, ＂flower＂ structure,＂interpretable＂ and ＂buried＂ strike-slip faults have been revealed exist in the Liaohe Western Sag. According to the research in this paper, the complex structural phenomena in the Liaohe Western Sag could be reasonably interpreted as right-lateral strike-slip activity and the strike-slip activities of the Liaohe Western Sag began in the early Oligocene. The activity was weak at the beginning （E3s1-2）, then strengthened gradually and reached its strongest level in the late Oligocene （E3d1）. In the Miocene, the strike-slip activity was low and then strengthened significantly once again from the Pliocene to the present. It is speculated that the entire northern section of the Tanlu Fault has had a similar evolution history since the Oligocene.

A challenge to the concept of slip-lines in extrusion tectonics

Wide-open V-shaped conjugate strike-slip faults in Asia are typically related to extrusion tectonics. However, the tectonic model based on the slip-line theory of plasticity has some critical problems associated with it. The conjugate sets of slip-lines in plane deformation, according to the theory of plasticity should be normal to each another but, in reality, the angles between the conjugate strike-slip faults, which are regarded as slip-lines in extrusion tectonics in the eastern Mediterranean, Tibet-middle Asia, China and the Indochina Peninsular regions, are always more than 90° （on average -110°） in the direction of contraction. Another problem is that the slip-line theory fails to explain how, in some cases, e.g., in the Anatolian area in the eastern Mediterranean, the extrusion rate is much higher than the indent rate. The two major problems are easy to solve in terms of the Maximum-Effective-Moment （MEM） Criterion that predicts that orientations of the shear zones are theoretically at an angle of 54.7° and practically at angles of 55°± 10° with the σ1- or contractional direction. The orientations of the strike-slip faults that accommodate extrusion tectonics are, therefore, fundamentally controlled by the MEM Criterion. When extrusion is along the MEM-orientations, the extruding rate is normally higher than the indenting rate.