Experimental study on aseismic behaviors of Chinese ancient tenon-mortise joint strengthened by CFRP

In order to well protect Chinese ancient buildings, aseismic behaviors of Chinese ancient tenon-mortise joints strengthened by carbon fibre reinforced plastic （CFRP） are studied by experiments. Based on the actual size of an ancient building, a wooden frame model with a scale of 1 ： 8 of the prototype structure is built considering the swallow-tail type of tenon-mortise connections. Low cyclic reversed loading tests are carried out including three groups of unstrengthened structures and two groups of structures strengthened with CFRP. Based on experimental data, moment-rotation angle hysteretic curves and skeleton curves for each joint are obtained. The energy dissipation capability, stiffness degradation and deformation performance of the joints before and after being strengthened are also analyzed. Results show that after being strengthened with CFRP, the tenon value pulled out of the mortise is reduced; the bending strength and the energy dissipation capabilities of the joint are enhanced; stiffness degradation of the joint is not obvious; and the deformation performance of the joint remains good. Thus, the CFRP has good effects on strengthening the tenon-mortise joints of Chinese ancient buildings.

Application of Modern Wood Product Glulam in Timber Frame With Tenon- Mortise Joints and Its Structural Behavior

Tenon-mortise joint is widely used in traditional timber structures around the world.This paper summarizes the results of an experimental study of the structural behavior of tenon-mortise joints made with glulam and CNC technology instead of traditional material and manual work.30 full-scale tenonmortise joints were manufactured and tested under monotonic loading,and the effects of dimension,shape,processing error and adhesive were evaluated.It was found that the round rectangular shaped tenon-mortise joints were comparable with traditional joints in terms of structural performance,but were time and labor saving.The variability of the proposed tenon-mortise joints was lower,which would benefit the design value.Applying adhesive between tenon and mortise increased the average stiffness by 4.3 times and average moment capacity by 27.4%,respectively.The gaps between wood members had little effect on the capacity and stiffness in monotonic bending but may influence the energy dissipation ability in cyclic bending.This study showed the feasibility of combining the traditional joinery method with modern wood products and manufacturing technology,which may promote the application of tenon-mortise joints in modern timber structures.