The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was syn...The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was synthesized by high temperature solid-state method, taking the Mg element as a doping element and the spherical Ni<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> (OH)<sub>2</sub>, Li<sub>2</sub>CO<sub>3</sub> as raw materials. The effects of calcination temperature on the structure and properties of the products were investigated. The structure and morphology of cathode materials powder were analyzed by X-ray diffraction spectroscopy (XRD) and scanning electronmicroscopy (SEM). The electrochemical properties of the cathode materials were studied by charge-discharge test and cyclic properties test. The results show that LiNi<sub>0.4985</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> Mg<sub>0.0015</sub>O<sub>2</sub> cathode material prepared at calcination temperature 930°C has a good layered structure, and the compacted density of the electrode sheet is above 3.68 g/cm<sup>3</sup>. The discharge capacity retention rate is more than 97.5% after 100 cycles at a charge-discharge rate of 1C, displaying a good cyclic performance.展开更多
A uniform Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material was prepared using a coprecipitation method to take advantage of the positive effect of Al on regenerated NCM(Ni,Co,Mn)cathode materials and ameliora...A uniform Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material was prepared using a coprecipitation method to take advantage of the positive effect of Al on regenerated NCM(Ni,Co,Mn)cathode materials and ameliorate cumbersome and high-cost impurity removal processes during lithium-ion battery recycling.When the Al^(3+) content in the leachate was 1 at.%with respect to the total amount of transition metals(Ni,Co,and Mn),the produced Al-doped NCM cathode material increased concentrations of lattice oxygen and Ni^(2+).The initial specific capacity at 0.1C was 167.4 mA·h/g,with a capacity retention of 79.1%after 400 cycles at 1C.Further,this Al-doped sample showed improved rate performance and a smaller electrochemical impedance.These findings provide a reference for developing industrial processes to resynthesize cathode materials with improved electrochemical performance by incorporating Al^(3+) impurities produced during lithium-ion battery recycling.展开更多
文摘The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was synthesized by high temperature solid-state method, taking the Mg element as a doping element and the spherical Ni<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> (OH)<sub>2</sub>, Li<sub>2</sub>CO<sub>3</sub> as raw materials. The effects of calcination temperature on the structure and properties of the products were investigated. The structure and morphology of cathode materials powder were analyzed by X-ray diffraction spectroscopy (XRD) and scanning electronmicroscopy (SEM). The electrochemical properties of the cathode materials were studied by charge-discharge test and cyclic properties test. The results show that LiNi<sub>0.4985</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> Mg<sub>0.0015</sub>O<sub>2</sub> cathode material prepared at calcination temperature 930°C has a good layered structure, and the compacted density of the electrode sheet is above 3.68 g/cm<sup>3</sup>. The discharge capacity retention rate is more than 97.5% after 100 cycles at a charge-discharge rate of 1C, displaying a good cyclic performance.
基金supported by Anhui Province Research and Development Innovation Project for Automotive Power Battery Efficient Recycling System, China
文摘A uniform Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material was prepared using a coprecipitation method to take advantage of the positive effect of Al on regenerated NCM(Ni,Co,Mn)cathode materials and ameliorate cumbersome and high-cost impurity removal processes during lithium-ion battery recycling.When the Al^(3+) content in the leachate was 1 at.%with respect to the total amount of transition metals(Ni,Co,and Mn),the produced Al-doped NCM cathode material increased concentrations of lattice oxygen and Ni^(2+).The initial specific capacity at 0.1C was 167.4 mA·h/g,with a capacity retention of 79.1%after 400 cycles at 1C.Further,this Al-doped sample showed improved rate performance and a smaller electrochemical impedance.These findings provide a reference for developing industrial processes to resynthesize cathode materials with improved electrochemical performance by incorporating Al^(3+) impurities produced during lithium-ion battery recycling.
