Surface crack evolution patterns in freeze-thaw damage of fissured rock bodies

To explore the effects of freeze‒thaw cycles on the mechanical properties and crack evolution of fissured sandstone,biaxial compression experiments were carried out on sandstone subjected to freeze‒thaw cycles to characterize the changes in the physical and mechanical properties of fissured sandstone caused by freeze‒thaw cycles.The crack evolution and crack change process on the surface of the fissured sandstone were recorded and analysed in detail via digital image technology(DIC).Numerical simulation was used to reveal the expansion process and damage mode of fine-scale cracks under the action of freeze‒thaw cycles,and the simulation results were compared and analysed with the experimental data to verify the reliability of the numerical model.The results show that the mass loss,porosity,peak stress and elastic modulus all increase with increasing number of freeze‒thaw cycles.With an increase in the number of freeze‒thaw cycles,a substantial change in displacement occurs around the prefabricated cracks,and a stress concentration appears at the crack tip.As new cracks continue to sprout at the tips of the prefabricated cracks until the microcracks gradually penetrate into the main cracks,the displacement cloud becomes obviously discontinuous,and the contours of the displacement field in the crack fracture damage area simply intersect with the prefabricated cracks to form an obvious fracture.The damage patterns of the fractured sandstone after freeze‒thaw cycles clearly differ,forming a symmetrical"L"-shaped damage pattern at zero freeze‒thaw cycles,a symmetrical"V"-shaped damage pattern at 10 freeze‒thaw cycles,and a"V"-shaped damage pattern at 20 freeze‒thaw cycles.After 20 freeze‒thaw cycles,a"V"-shaped destruction pattern and"L"-shaped destruction pattern are formed;after 30 freeze‒thaw cycles,an"N"-shaped destruction pattern is formed.This shows that the failure mode of fractured sandstone gradually becomes more complicated with an increasing number of freeze‒thaw cycles.The effects of freeze‒thaw cycles on the direction and rate of crack propagation are revealed through a temperature‒load coupled model,which provides an important reference for an in-depth understanding of the freeze‒thaw failure mechanisms of fractured rock masses.

Effects of thawing-induced softening on fracture behaviors of frozen rock

Due to the presence of ice and unfrozen water in pores of frozen rock,the rock fracture behaviors are susceptible to temperature.In this study,the potential thawing-induced softening effects on the fracture behaviors of frozen rock is evaluated by testing the tension fracture toughness(KIC)of frozen rock at different temperatures(i.e.-20℃,-15℃,-12℃,-10℃,-8℃,-6℃,-4℃,-2℃,and 0℃).Acoustic emission(AE)and digital image correlation(DIC)methods are utilized to analyze the microcrack propagation during fracturing.The melting of pore ice is measured using nuclear magnetic resonance(NMR)method.The results indicate that:(1)The KIC of frozen rock decreases moderately between-20℃ and-4℃,and rapidly between-4℃ and 0℃.(2)At-20℃ to-4℃,the fracturing process,deduced from the DIC results at the notch tip,exhibits three stages:elastic deformation,microcrack propagation and microcrack coalescence.However,at-4℃e0℃,only the latter two stages are observed.(3)At-4℃e0℃,the AE activities during fracturing are less than that at-20℃ to-4℃,while more small events are reported.(4)The NMR results demonstrate a reverse variation trend in pore ice content with increasing temperature,that is,a moderate decrease is followed by a sharp decrease and-4℃ is exactly the critical temperature.Next,we interpret the thawing-induced softening effect by linking the evolution in microscopic structure of frozen rock with its macroscopic fracture behaviors as follow:from-20℃ to-4℃,the thickening of the unfrozen water film diminishes the cementation strength between ice and rock skeleton,leading to the decrease in fracture parameters.From-4℃ to 0℃,the cementation effect of ice almost vanishes,and the filling effect of pore ice is reduced significantly,which facilitates microcrack propagation and thus the easier fracture of frozen rocks.

Effects of freeze-thaw cycles on sandstone in sunny and shady slopes

A growing rock engineering activity in cold regions is facing the threat of freeze-thaw(FT)weathering,especially in high mountains where the sunny-shady slope effects strongly control the difference in weathering behavior of rocks.In this paper,an investigation of the degradation of petrophysical characteristics of sandstone specimens subjected to FT cycle tests to simulate the sunny-shady slope effects is presented.To this aim,non-destructive and repeatable testing techniques including weight,ultrasonic waves,and nuclear magnetic resonance methods on standard specimens were performed.For the sunny slope specimens,accompanied by the enlargement of small pores,100 FT cycles caused a significant decrease in P-wave velocity with an average of 23%,but a consistent rise of 0.18%in mass loss,34%in porosity,67%in pore geometrical mean radius,and a remarkable 14.5-fold increase in permeability.However,slight changes with some abnormal trends in physical parameters of the shady slope specimens were observed during FT cycling,which can be attributed to superficial granular disaggregation and pore throat obstruction.Thermal shocks enhance rock weathering on sunny slopes during FT cycles,while FT weathering on shady slopes is restricted to the small pores and the superficial cover.These two factors are primarily responsible for the differences in FT weathering intensity between sunny and shady slopes.The conclusions derived from the interpretation of the experimental results may provide theoretical guidance for the design of slope-failure prevention measures and the selection of transportation routes in cold mountainous regions.

Quantification of the concrete freeze–thaw environment across the Qinghai–Tibet Plateau based on machine learning algorithms

The reasonable quantification of the concrete freezing environment on the Qinghai–Tibet Plateau(QTP) is the primary issue in frost resistant concrete design, which is one of the challenges that the QTP engineering managers should take into account. In this paper, we propose a more realistic method to calculate the number of concrete freeze–thaw cycles(NFTCs) on the QTP. The calculated results show that the NFTCs increase as the altitude of the meteorological station increases with the average NFTCs being 208.7. Four machine learning methods, i.e., the random forest(RF) model, generalized boosting method(GBM), generalized linear model(GLM), and generalized additive model(GAM), are used to fit the NFTCs. The root mean square error(RMSE) values of the RF, GBM, GLM, and GAM are 32.3, 4.3, 247.9, and 161.3, respectively. The R^(2) values of the RF, GBM, GLM, and GAM are 0.93, 0.99, 0.48, and 0.66, respectively. The GBM method performs the best compared to the other three methods, which was shown by the results of RMSE and R^(2) values. The quantitative results from the GBM method indicate that the lowest, medium, and highest NFTC values are distributed in the northern, central, and southern parts of the QTP, respectively. The annual NFTCs in the QTP region are mainly concentrated at 160 and above, and the average NFTCs is 200 across the QTP. Our results can provide scientific guidance and a theoretical basis for the freezing resistance design of concrete in various projects on the QTP.

Change in Grain-Size Composition of Lignite under Cyclic Freezing-Thawing and Wetting-Drying

The paper presents the change in grain-size composition of lignite under cyclic freezing-thawing (FTC) and wetting-drying (WDC). The article shows that in the spring and autumn periods the lignites can be subjected to repeated freezing-thawing and wetting-drying, which determines the possibility of changing their grain-size composition and structure. Experimental studies in laboratory conditions on the influence of cyclic freezing-thawing (FTC) and wetting-drying (WDC) on the quality indicators of lignites have been carried out, their granulometric (fractional) composition has been studied. Freezing-thawing cycle conditions are as follows (FTC): minimum exposure temperature: -20°C;maximum: +5°C;relative humidity: 30%;number of processing cycles: 3. Wetting-drying cycles are as follows (WDC): drying temperatures are +20, +40, +60, +80°C, drying time 90 minutes, the coals are further subjected to rain (soaking) for a period of water saturation to humidity of 30% - 40% and dry again. The number of wetting-drying cycles is 3 times. The tests have revealed the destructive effects of FTC and WDC on the samples of lower metamorphic grade coal, and the cycles of wet-dry lead to the much higher yield of fine sizes (-6+0;-13+0 mm) than the cycles of freeze-thaw. Furthermore, it is found that the increase in the yield of fines depends on the heating temperature: coal disintegration proceeds more intensively at a higher temperature of drying.

Study on temperature field and settlement of thawing soil under static and dynamic loading

A series of tests were conducted to analyze temperature field distribution and thawing settlement of a thawing soil under static and dynamic loading at various cooling and thawing temperatures. The results demonstrate： （1） the temperature field distribution of the thawing soil was not significantly influenced by the loading form under the tested loading conditions; similar results were obtained for samples at different dynamic loading frequencies and different dynamic loading ampli- tudes, which verified the independence of loading form and temperature field; （2） changed temperature field distributions were found in thawing soil with different cooling and thawing temperatures, and the cooling and thawing temperature of the samples were the main factors affecting their temperature distributions; （3） under the tested conditions, thawing set- tlements were little influenced by the thawing temperature and the dynamic loading frequency; and （4） a linear relation- ship existed between the thawing settlement and the cooling temperature, and a logarithmic function could be used to describe the relationship between the thawing settlement and the loading amplitude.

Effects of freeze-thaw cycle on engineering properties of loess used as road fills in seasonally frozen ground regions,North China

Compacted loess is widely used as fills of road embankments in loess regions of northern China.Generally, densely-compacted loess can satisfy the requirements of embankment strength and postconstruction deformation. However, uneven subsidence, pavement cracks and other related damages can affect the integrity of loess subgrade after several years of operation,and even cause some hazards, especially in North China, where the strong freeze-thaw erosion occurs. In this study, cyclic freeze-thaw tests for both densely and loosely compacted loess samples were performed to determine the variation in engineering properties such as volume, void ratio, collapsible settlement,microstructure, and the related mechanisms were addressed. The experimental results showed that an obvious water migration and redistribution occurred within the samples during freeze-thaw cycles. Ice lenses and fissures could be identified in the upper frozen layers of the samples. After freeze-thaw cycles,the dry densities of the upper layers of samples changed significantly due to strong freeze-thaw erosion. The dry densities decreased for the dense sample and increased for the loose sample. It can be found that dense samples become loose, while loose samples became dense with the increasing number of freeze-thaw cycles. Their related void ratios changed reversely. Both void ratios tended to fall into a certain range, which verified the concept of a residual void ratio proposed by Viklander. The loosening process of densely compacted samples involves the formation of large pores, volume increase and density reduction as well as the related changes in mechanical properties because freeze-thaw cycles may be important contribution to problems of loess road embankments.Adverse effects of freeze-thaw cycles, therefore,should be taken into account in selecting loess parameters for the stability evaluation of road embankment in seasonally frozen ground regions.

The mechanism underlying overwintering death in poplar:the cumulative effect of effective freeze-thaw damage

We analyzed the relationships linking overwintering death and frost cracking to temperature and sunlight as well as the effects of low temperatures and freeze–thaw cycles on bud-burst rates,relative electrical conductivity,and phloem and cambial ultrastructures of poplar.Overwintering death rates of poplar were not correlated with negative accumulated temperature or winter minimum temperature.Freeze–thaw cycles caused more bud damage than constant exposure to low temperatures.Resistance to freeze–thaw cycles differed among clones,and the budburst rate decreased with increasing exposure to freeze–thaw cycles.Cold-resistant clones had the lowest relative electrical conductivity.Chloroplasts exhibited the fastest and the most obvious reaction to freeze–thaw damage,whereas a single freeze–thaw cycle caused little damage to cambium ultrastructure.Several such cycles resulted in damage to plasma membranes,severe damage to organelles,dehydration of cells and cell death.We conclude that overwintering death of poplar is mainly attributed to the accumulation of effective freeze–thaw damage beyond the limits of freeze–thaw resistance.

Numerical simulation based on two-directional freeze and thaw algorithm for thermal diffusion model

Freeze-thaw processes significantly modulate hydraulic and thermal char- acteristics of soil. The changes in the frost and thaw fronts （FTFs） affect the water and energy cycles between the land surface and the atmosphere. Thus, the frozen soil com- prising permafrost and seasonally frozen soil has important effects on the land surface hydrology in cold regions. In this study, a two-directional freeze and thaw algorithm is incorporated into a thermal diffusion equation for simulating FTFs. A local adaptive variable-grid method is used to discretize the model. Sensitivity tests demonstrate that the method is stable and FTFs can be tracked continuously. The FTFs and soil tempera- ture at the Qinghai-Tibet Plateau D66 site are simulated hourly from September 1, 1997 to September 22, 1998. The results show that the incorporated model performs much better in the soil temperature simulation than the original thermal diffusion equation, showing potential applications of the method in land-surface process modeling.

Deformation monitoring and analysis at two frost mounds during freeze–thaw cycles along the Qinghai–Tibet Engineering Corridor

This paper presents various deformation-monitoring technologies employed to monitor the frost heave and thaw settlement of two mounds along the Qinghai–Tibet Engineering Corridor(QTEC), China. The QTEC is known as a critical infrastructure and passage connecting inland China and the Qinghai–Tibet Plateau(QTP). Three technologies—global navigation satellite system(GNSS), terrestrial laser scanning(TLS), and unmanned aerial vehicle(UAV)—were used to estimate the freeze/thaw–induced 3D surface deformation of two frost mounds. Our results showed that (1) the two frost mounds exhibited mainly thaw settlement in thawing periods and frost heave in the freezing period, but frost heave dominated after repeated freeze–thaw cycles;(2) different zones of the mounds showed different deformation characteristics;(3) active-layer thickness(ALT) and elevation changes were highly correlated during thaw periods;(4) integrated 3D-measurement technologies can achieve a better understanding and assessment of hazards in the permafrost area.

Effect of Different Thawing Methods on Post-thaw Motility of Cow Semen in Cryopreservation Straws

The study was to investigate the effects of different thawing temperatures(5,15,40,75,90 ℃) and times(1- 120 s) on properties of post-thaw cow semen by detecting frozen-thawed semen motility,acrosome integrity and tail membrane integrity,further obtaining the optimal thawing method of straw frozen semen from dairy cow. The results showed that(1) Thawing of the straw frozen semen of dairy cow at 75 ℃ for 3 s yielded the highest semen motility,followed by 40 ℃for 20 s,and the least by low temperature 5 ℃ and room temperature 15 ℃ with a semen motility of 0. 3,moreover thawing at high temperature 90 ℃ was not suitable for large scale production due to the difficult control of the temperature;(2) The acrosome intact rate and plasma membrane integrity rate of semens thawed at90 ℃ were remarkably lower than that at 40 ℃ and 75 ℃ significantly(P 【 0. 05),while its semen malformation rate was significantly higher than that at 40 ℃and 75 ℃(P 【 0. 05);(3) The Survival time of semens at 37 ℃ varied largely among different thawing temperature,in detail by 40 ℃ 】 75 ℃ 】 90 ℃. In practice,the thawing method of straw frozen semen of dairy cow should be selected according to the specific circumstance and inseminated immediately,with the recommended condition of thawing at 75 ℃ for 3 s. If the thawed semen could not be inseminated immediately,the thawing should be performed at 20 s for 40 ℃to maintain the motility for a longer term.

The Surface Energy Budget and Its Impact on the Freeze-thaw Processes of Active Layer in Permafrost Regions of the Qinghai-Tibetan Plateau

The surface energy budget is closely related to freeze-thaw processes and is also a key issue for land surface process research in permafrost regions.In this study,in situ data collected from 2005 to 2015 at the Tanggula site were used to analyze surface energy regimes,the interaction between surface energy budget and freeze-thaw processes.The results confirmed that surface energy flux in the permafrost region of the Qinghai-Tibetan Plateau exhibited obvious seasonal variations.Annual average net radiation(R_(n))for 2010 was 86.5 W m^(-2),with the largest being in July and smallest in November.Surface soil heat flux(G_(0))was positive during warm seasons but negative in cold seasons with annual average value of 2.7 W m^(-2).Variations in R_(n) and G_(0) were closely related to freeze-thaw processes.Sensible heat flux(H)was the main energy budget component during cold seasons,whereas latent heat flux(LE)dominated surface energy distribution in warm seasons.Freeze-thaw processes,snow cover,precipitation,and surface conditions were important influence factors for surface energy flux.Albedo was strongly dependent on soil moisture content and ground surface state,increasing significantly when land surface was covered with deep snow,and exhibited negative correlation with surface soil moisture content.Energy variation was significantly related to active layer thaw depth.Soil heat balance coefficient K was>1 during the investigation time period,indicating the permafrost in the Tanggula area tended to degrade.

Effects of Storage Temperature on the Effective Activity of Straw Frozen Semen after Thawing

The aim was to discuss the optimal storage environment and proper insemination time after thawing of 0.25 mL straw frozen semen. Straw frozen semen was thawed at 40 ℃ for 20 s, and then stored at 0 -4 ℃, 14 - 16 ℃, 25 -27 ℃ for 2, 4, 6, 8 and 10 h, respectively. The sperm motility was detected. After thawing, semen was stored at 0 - 4 ℃ and 14 - 16 ℃ for 10 h. Their sperm motilities （0.434 ±0. 016 7 and 0.423 ±0.019 6） had no significant differences （P 〉 0.05） with initial thawing motility （0.441 ± 0.030）. Sperm motility reduced as the storage time prolonged at 25 -27 ℃. Sperm motility after 6 h had signifi- cant differences with that of initial thawing motility （P 〈 O. 05 ）, and sperm motilities after 8 and 10 h showed extremely significant differences （P 〈 0.01 ）. Thus, sperm motility after thawing was still very high after stored at 0 -4 ℃ and 14 - 16 ℃ within 10 h, which met the requirements for insemination. Under this temperature and time ranges, sperm could be carried over long distances, which had small effects on sperm quality and reached the expected insemination effects. However, under the temperature of 25 - 27 ℃, semen should be used for insemination within 6 h after thawing.

Changes in freezing and thawing indices over the source region of the Yellow River from 1980 to 2014

Freezing and thawing indices are not only of great significance for permafrost research but also are important indicators of the effects of climate change.However,to date,research on ground-surface freezing and thawing indices and their relationship with air indices is limited.Based on daily air and ground-surface temperatures collected from 11 meteorological stations in the source region of the Yellow River,the freezing and thawing indices were calculated,and their spatial distribution and trends were analyzed.The air-freezing index(AFI),air-thawing index(ATI),ground surface-freezing index(GFI),ground surface-thawing index(GTI),air thawing-freezing index ratio(Na)and surface ground thawing-freezing index ratio(Ng)were 1554.64,1153.93,1.55,2484.85,850.57℃-days and 3.44,respectively.Altitude affected the spatial distribution of the freezing and thawing indices.As the altitude increased,the freezing indices gradually increased,and the thawing indices and thawing-freezing index ratio decreased.From 1980 to 2014,the AFI and GFI decreased at rates of 8.61 and 11.06℃-days a^(-1),the ATI and GTI increased at 9.65 and 14.53℃-days a^(-1),and Na and Ng significantly increased at 0.21 and 0.79 decade^(-1).Changes in the freezing and thawing indices were associated with increases in the air and ground-surface temperatures.The rates of change of the ground surface freezing and thawing indices were faster than the air ones because the rate of increase of the groundsurface temperature was faster than that of the air and the difference between the ground surface and air increased.The change point of the time series of freezing and thawing indices occurred in 2000–2001.After 2000–2001,the AFI and GFI were lower than before the change point,and the changing trend was lower.The ATI,GTI,Na and Ng during 2001–2014 were higher,with faster rates than before.In addition,the annual thawing indices composed a greater proportion of the mean annual air temperature and mean annual ground surface temperature than the annual freezing indices.This study provides the necessary basis for research on and prediction of permafrost changes,especially changes in the depth of the active permafrost layer,climate change,and possible evolution of the ecological environment over the source region of the Yellow River on the Qinghai-Tibet Plateau.

Impact of the Anomalous Thawing in the Tibetan Plateau on Summer Precipitation in China and Its Mechanism

The impact of the anomalous thawing of frozen soil in the late spring on the summer precipitation in China and its possible mechanism are analyzed in the context of the frozen soil thawing date data of the 50 meteorological stations in the Tibetan Plateau, and the NCEP/NCAR monthly average reanalysis data. Results show that the thawing dates of the Tibetan Plateau gradually become earlier from 1980 to 1999, which is consistent with the trend of global warming in the 20th century. Because differences in the thermal capacity and conductivity between frozen and unfrozen soils are larger, changes in the freezing/thawing process of soil may change the physical properties of the underlying surface, thus affecting exchanges of sensible and latent heat between the ground surface and air. The thermal state change of the plateau ground surface must lead to the thermal anomalies of the atmosphere over and around the plateau, and then further to the anomalies of the general atmospheric circulation. A possible mechanism for the impact of the thawing of the plateau on summer (July) precipitation may be as follows. When the frozen soil thaws early (late) in the plateau, the thermal capacity of the ground surface is large (small), and the thermal conductivity is small (large), therefore, the thermal exchanges between the ground surface and the air are weak (strong). The small (large) ground surface sensible and latent heat fluxes lead to a weak (strong) South Asian high, a weak (strong) West Pacific subtropical high and a little to south (north) of its normal position. Correspondingly, the ascending motion is strengthened (weakened) and precipitation increases (decreases) in South China, while in the middle and lower reaches of the Changjiang River, the ascending motion and precipitation show the opposite trend.

Effects of Freeze–thaw Cycles on Soil Mechanical and Physical Properties in the Qinghai–Tibet Plateau

Extreme freeze-thaw action occurs on the Qinghai-Tibet Plateau due to its unique climate resulting from high elevation and cold temperature.This action causes damage to the surface soil structure, as soil erosion in the Qinghai-Tibet Plateau is dominated by freeze-thaw erosion.In this research,freezing–thawing process of the soil samples collected from the Qinghai–Tibet Plateau was carried out by laboratory experiments to determinate the volume variation of soil as well as physical and mechanical properties, such as porosity, granularity and uniaxial compressive strength, after the soil experiences various freeze–thaw cycles.Results show that cohesion and uniaxial compressive strength decreased as the volume and porosity of the soil increased after experiencing various freeze–thaw cycles, especially in the first six freeze–thaw cycles.Consequently, the physical and mechanical properties of the soil were altered.However, granularity and internal friction angle did not vary significantly with an increase in the freeze–thaw cycle.The structural damage among soil particles due to frozen water expansion was the major cause of changes in soil mechanical behavior in the Qinghai–Tibet Plateau.

Mechanics Behavior of Ultra High Toughness Cementitious Composites after Freezing and Thawing

Mechanical behaviors of UHTCC after freezing and thawing were investigated,and compared with those of steel fiber reinforced concrete（SFRC）,air-entrained concrete（AEC） and ordinary concrete（OC）.Four point bending tests had been applied after different freezing-thawing cycles（0,50,100,150,200 and 300 cycles,respectively）.The results showed that residual flexural strength of UHTCC after 300 freezing-thawing cycles was 10.62 MPa（70% of no freezing thawing ones）,while 1.58 MPa（17% of no freezing thawing ones） for SFRC.Flexural toughness of UHTCC decreased by 17%,while 70% for SFRC comparatively.It has been demonstrated experimentally that UHTCC without any air-entraining agent could resist freezing-thawing and retain its high toughness characteristic in cold environment.Consequently,UHTCC could be put into practice for new-built or retrofit of infrastructures in cold regions.

Variations and trends of the freezing and thaw- ing index along the Qinghai-Xizang Railway for 1966-2004

Annual freezing and thawing index of 7 meteorological stations along the Qing- hai-Xizang Railway were calculated based on daily maximum and minimum temperature records for 1966-2004. Trends of annual freezing and thawing index were analyzed using the Mann-Kendall test and a simple linear regression method. The results show that： 1） The mean annual freezing indices range from 95 to 2300℃·d and the mean annual thawing indices range from 630 to 3250℃·d. The mean annual freezing index of the 7 stations exhibited decreasing trends with decreasing rate of -16.6- -59.1 ℃·d/10a. The mean annual thawing index of these 7 stations showed increasing trends with the related decreasing rate is 19.83-45.6℃·d/10a. 2） The MK trend test indicated the significant decreasing trends （significant at 〈 0.05 significant level） in the annual freezing index for most stations except for Golmud. The significant increasing trends can be observed in the annual thawing index for 4 stations except Golmud and Tuotuohe. Golmud was the only station with no trends in both annual freezing and annual thawing index.

Effect of freeze-thaw cycles on uniaxial mechanical properties of cohesive coarse-grained soils

Freeze-thaw cycles are closely related to the slope instability in high-altitude mountain regions. In this study, cohesive coarse-grained soils were collected from a high-altitude slope in the Qinghai–Tibet Plateau to study the effect of cyclic freeze-thaw on their uniaxial mechanical properties. The soil specimens were remolded with three dry densities and three moisture contents. Then, after performing a series of freeze-thaw tests in a closed system without water supply, the soil specimens were subjected to a uniaxial compression test. The results showed that the stress-strain curves of the tested soils mainly performed as strain-softening. The softening feature intensified with the increasing dry density but weakened with an increase in freeze-thaw cycles and moisture content. The uniaxial compressive strength, resilient modulus, residual strength and softening modulus decreased considerably with the increase of freeze-thaw cycles. After more than nine freeze-thaw cycles, these four parameters tended to be stable. These parameters increased with the increase of dry density and decreased with the increasing moisture content, except for the residual strength which did not exhibit any clear variation with an increase in moisture content. The residual strength, however, generally increased with an increase in dry density. The soil structural damage caused by frozen water expansion during the freeze-thaw is the major cause for the changes in mechanical behaviors of cohesive coarse-grained soils. With results in this study, the deterioration effect of freeze-thaw cycles on the mechanical properties of soils should be considered during the slope stability analysis in high-altitude mountain regions.

Experimental study of dynamic resilient modulus of subgrade soils under coupling of freeze–thaw cycles and dynamic load

Although the dynamic properties of subgrade soils in seasonally frozen areas have already been studied, few researchers have considered the influence of shallow groundwater during the freeze–thaw(F–T) cycles. So a multifunctional F–T cycle system was developed to imitate the groundwater recharge in the subgrade during the freezing process and a large number of dynamic triaxial experiments were conducted after the F–T cycles. Some significant factors including the F–T cycle number, compaction degree, confining pressure, cyclic deviator stress, loading frequency, and water content were investigated for the resilient modulus of soils. The experimental results indicated that the dynamic resilient modulus of the subgrade was negatively correlated with the cyclic deviator stress, F–T cycle number, and initial water content, whereas the degree of compaction, confining pressure, and loading frequency could enhance the resilient modulus. Furthermore, a modified model considering the F–T cycle number and stress state was established to predict the dynamic resilient modulus. The calculated results of this modified model were very close to the experimental results. Consequently, calculation of the resilient modulus for F–T cycles considering the dynamic load was appropriate. This study provides reference for research focusing on F–T cycles with groundwater supply and the dynamic resilient moduli of subgrade soils in seasonally frozen areas.