Permeability differences based on three-dimensional geometrical information of void spaces

In this study,the permeabilities of Berea and Otway sandstones were measured under different confining pressures,and porosity was investigated through mercury intrusion porosimetry(MIP).The total porosities of the Berea and Otway sandstones were approximately 17.4%and 25%,respectively.Pore size distributions of each sandstone were almost the same,but the pores in the Otway sandstone were slightly narrower.However,the permeability of the Otway sandstone was smaller than that of the Berea sandstone by one order of magnitude.Three-dimensional(3D)void geometry and geometrical properties of the void spaces relevant to flow were compared to obtain the relation between the permeability differences and porosities of the two sandstones.The 3D geometrical analysis using microfocus X-ray computed tomography(CT)was performed,and the pore geometries of both sandstones were compared using the 3D medial axis(3DMA)method.Pore and throat radii,pore coordination number,tortuosity,number of connecting paths,connecting path volume,and other factors were determined using 3DMA.The Otway sandstone was characterized by a small effective throat/pore radius ratio.Based on the fluid flow mechanism,the lower effective throat/pore radius ratio results in a lower permeability induced by the fluid energy loss,which means that the 3D geometrical shape of void spaces affects the permeability value.

Three-dimensional Information Decoupling System Based on PSD and Deviation Correction

Three-dimensional Information Decoupling System Based on PSD were designed based on LabVIEW, in order to achieve precision, timeliness, reliability require-ments of the PSD used in the ATP system of Satellite Earth quantum communication. Firstly, the laser light source was driven by a stepper motor to scan on the PSD photosensitive surface, and the voltage value was collected and calculated to get the spot position. Analyzing the cause of nonlinear, a mathematical model was built between the actual value and the measured value by using binary quadratic polynomial method, PSD nonlinear correction function would be got. Then, the object micro displacement and angle offset were measured by combining optical triangulation method, and the error of the measurement results was corrected. Experimental results showed that, after the correction, the measuring deviation could be significantly reduced, the PSD performance calibration requirements was achieved, the efficiency of the system was developed greatly by using LabVIEW.

Exploring the Three-dimensional Framework of Knowledge Service in the field of Library and Information Science(LIS)

The evolution of the society and economy has stimulated the development of Knowledge Service(KS), making it an indispensable solution to address future challenges facing libraries and information institutions. However at present, academic research on knowledge service is falling short and its definition is far from clear and complete. As such,this article proposes the Three-dimensional Framework Knowledge Service(TdFKS) for libraries and information institutions based on the knowledge value chain model. By making reliability analysis and mean value analysis of a questionnaire survey result, the article clarifies the structure of the three-dimensional framework and verifies the rationality of the TdFKS.

Geologic body three-dimensional model generation and visualization method

The divergence three-dimensional millet-seed body model and the continuous distributing layer-imitating model were introduced, which were used to express geologic body, and the procedure of generating these two models and their merits and demerits were synthesized. Three methods of geologic body’s three-dimensional expression were separately introduced, and the merits of the continuous distributing layer imitating model were proposed as comparing with the divergence three-dimensional millet-seed body model. The three-dimensional cubes were observed from any direction and any tangle with the application of dealing methods such as peeling, hollowing out, transparent or half-transparent.

Human Body Information Database and Method of Application

This paper elaborate the emergence of human information database and the important role it plays in the various industries of economic development. It also interpret the primary human information database of current domestic and abroad and analysis it＇s classification characteristic, Besides, this papers further explains how to make use of human information database and how to make the database to play its due value. In the end, the prospect of our country＇s body information database has been set forth, using relatively mature foreign database to improve Chinese body information database.

Three-dimensional analysis of pedicle screw channel,screw entry point and lateral surface of cervical vertebral body

Objective To explore three-dimensional relations of pedicle screw channel (PSC) ,screw entry point and lateral surface of cervical vertebral body by digital techniques. Methods CT scan images of cervical

FINITE-PART INTEGRAL AND BOUNDARY ELEMENT METHOD FOR INTERACTION BETWEEN TWO PARALLEL PLANAR CRACKS IN THREE-DIMENSIONAL FINITE BODIES

By using the Somigliana representation and the concepts offinite-part integrals, a set of hypersingular integral equations ofthe interaction between two parallel planar cracks in a three-dimen-sional finite body subjected to arbitrary loads is derived, and thenits numerical method is proposed by the finite-part integral methodcombined with the boundary element method. According to the analytictheory of hypersingular integral equations, the square root models ofdisplacement discontinuities in the elements near the crack front areapplied, and thus the computational precision is raised. Based onthis, the stress intensity factors can be directly calculated.Finally, the stress intensity factors of sever- al typicalinteraction problems are calculated.

Three-Dimensional Cooperative Localization via Space-Air-Ground Integrated Networks

The space-air-ground integrated network(SAGIN)combines the superiority of the satellite,aerial,and ground communications,which is envisioned to provide high-precision positioning ability as well as seamless connectivity in the 5G and Beyond 5G(B5G)systems.In this paper,we propose a three-dimensional SAGIN localization scheme for ground agents utilizing multi-source information from satellites,base stations and unmanned aerial vehicles(UAVs).Based on the designed scheme,we derive the positioning performance bound and establish a distributed maximum likelihood algorithm to jointly estimate the positions and clock offsets of ground agents.Simulation results demonstrate the validity of the SAGIN localization scheme and reveal the effects of the number of satellites,the number of base stations,the number of UAVs and clock noise on positioning performance.

Three-dimensional experimental study of loose top-coal drawing law for longwall top-coal caving mining technology

Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.

Two-and Three-Dimensional Urban Core Determinants of the Urban Heat Island： A Statistical Approach

There is no doubt that the UHI （urban heat island） is a mounting problem in built-up environments, due to the energy retention by surface dense building materials, leading to increased temperatures, air pollution, and energy consumption. Much of the earlier research on the UHI has used two-dimensional （2-D） information, such as land uses and the distribution of vegetation. In the case of homogeneous land uses, it is possible to predict surface temperatures with reasonable accuracy with 2-D information. However, three-dimensional （3-D） information is necessary to analyze more complex sites, including dense building clusters. In this research, 3-D building geometry information is combined with 2-D urban surface information to examine the relationship between urban characteristics and temperature. The research includes the following stages： （1） estimating urban temperature; （2） developing a 3-D city model; （3） generating geometric parameters; and （4） conducting statistical analyses using both linear and non-linear regression models. The implications of the results are discussed, providing guidelines for policies aiming to reduce the UHI.

Evolution and Development of the Information Concept in Biological Systems: From Empirical Description to Informational Modeling of the Living Structures

With the purpose to smooth the way of a correct understanding of information concepts and their evolution,in this paper,is discussed the evolution and development of the concept of information in biological systems,showing that this concept was intuitively perceived even since ancient times by our predecessors,and described according to their language level of that times,but the crystallization of the real meaning of information is an achievement of our nowadays,by successive contribution of various scientific branches and personalities of the scientific community of the world,leading to a modern description/modeling of reality,in which information plays a fundamental role.It is shown that our reality can be understood as a contribution of matter/energy/information and represented/discussed as the model of the Universal Triangle of Reality(UTR),where various previous models can be suggestively inserted,as a function of their basic concern.The modern concepts on information starting from a theoretic experiment which would infringe the thermodynamics laws and reaching the theory of information and modern philosophic concepts on the world structuration allow us to show that information is a fundamental component of the material world and of the biological structures,in correlation with the structuration/destructuration processes of matter,involving absorption/release of information.Based on these concepts,is discussed the functionality of the biologic structures and is presented the informational model of the human body and living structures,as a general model of info-organization on the entire biological scale,showing that a rudimentary proto-consciousness should be operative even at the low-scale biological systems,because they work on the same principles,like the most developed bio-systems.The operability of biologic structures as informational devices is also pointed out.

Information in the Universal Triangle of Reality for Non-living/Living Structures:From Philosophy to Neuro/Life Sciences

With the purpose to understand better the role of information not only in communication systems,but actually in our environmental reality,this paper presented the model of Universal Triangle of Reality,composed by Matter,Energy and Information,as fundamental constitutive components of this reality.Arguments coming from the field of physics,both at the cosmic and microparticles scale are presented,showing undoubtable conclusions that information is a fundamental component of reality in our material world.At the cosmic level,where the unusual high concentration of mass in the black holes constitutes a special state of matter,suitable for analysis of their special properties,the problem of the conservation principle of information is discussed.At the quantum level,the special unusual characteristics derived from the non-localization principle are also highlighted,together with information-involved problems and solutions.The Universal Triangle of Reality in the living systems reveals the high role of the involved information,both as the informational common organization on the entire evolution scale,and as the info-dynamics processes inside of own structure and resulted from interaction with the environment.The relevant advances in the approaching and understanding of the functionality of the living systems from informational point of view are highlighted,showing the high contribution of information concepts in understanding/solving of various older/recent problems in philosophy,neuroscience/neurology/psychiatry,neuro-physics/neuropsychology/behavior sciences,geriatrics/gerontology,biology and life sciences.

Three-Dimensional Prototypes and Evaluation of Their Structure and Form

In order to reveal the appearance of the clothing prototype on the human body,the characteristics of the human body’s structure above the waist section were studied.Based on the experimental data of the fit prototype,three-dimensional prototypes features were comparatively analyzed.And then objectively evaluating the relationship was conducted between the planar structure lines of different prototypes and the human body.The results showed that the prototypes analyzed basically conformed to the size of the human body.However,when they were worn on the human body,there were problems in the structure and forming.The main reason was that the side seam was skewed to different degrees.The results of this study provide reference for many practitioners to choose prototypes.

Three-Dimensional Scene Encryption Algorithm Based on Phase Iteration Algorithm of the Angular-Spectral Domain

In order to increase the capacity of encrypted information and reduce the loss of information transmission, a three-dimensional(3 D) scene encryption algorithm based on the phase iteration of the angular spectrum domain is proposed in this paper. The algorithm, which adopts the layer-oriented method, generates the computer generated hologram by encoding the three-dimensional scene. Then the computer generated hologram is encoded into three pure phase functions by adopting the phase iterative algorithm based on angular spectrum domain,and the encryption process is completed. The three-dimensional scene encryption can improve the capacity of the information,and the three-phase iterative algorithm can guarantee the security of the encryption information. The numerical simulation results show that the algorithm proposed in this paper realized the encryption and decryption of three-dimensional scenes. At the same time, it can ensure the safety of the encrypted information and increase the capacity of the encrypted information.

Three-dimensional critical slip surface locating and slope stability assessment for lava lobe of Unzen volcano

Even Unzen volcano has been declared to be in a state of relative dormancy,the latest formed lava lobe No.11 now represents a potential slope failure mass based on the latest research.This paper concentrates on the stability of the lava lobe No.11 and its possible critical sliding mass.It proposes geographic information systems (GIS) based three-dimensional (3D) slope stability analysis models.It uses a 3D locating approach to identify the 3D critical slip surface and to analyze the 3D stability of the lava lobe No.11.At the same time,the new 3D approach shows the effectiveness in selecting the range of the Monte Carlo random variables and locating the critical slip surface in different parts of the lava lobe No.11.The results are very valuable for judging the stability of the lava lobe and assigning the monitoring equipments.

Digitizing the Undigitized: Converting Traditional Archaeological Records into Computerized, Three-Dimensional Site Reconstruction

Archaeological excavation involves disintegration, removal, and reassembly of the archaeological record;as such it is considered by many to be an unrepeatable, destructive activity. This perception has contributed to an advancement in archaeological practice, namely, the development of computerized recording systems that digitally record archaeological excavations spatially and volumetrically during fieldwork. This paper is concerned with those archaeological sites where digital field recording has not been done. These sites, recorded by traditional methods, should not be excluded from attempts to restructure the spatial, volumetric, and stratigraphic archaeological data. A thorough methodology for the conversion of traditional records into digitized data is presented, including the detailed procedures required for three-dimensional plotting of recorded data—both the excavated material and the drawn site maps and cross-sections. Finally, the use of these methods is demonstrated on a complex Early to Middle Pleistocene site, illustrating the benefits of digitization and three-dimensional reconstruction in resolving stratigraphic and spatial questions.

THE CLIMATIC STUDY OF CHANGBAI MOUNTAIN BY INTEGRATION OF REMOTE SENSING INFORMATION AND GEO-CODED IMAGES

Ⅰ. INTRODUCTION Changbai Mountain is situated between E127°54′-128°08′, N40°58′-42°06′ about 2700 meters above sea level. It is the typical area of the mountainous climate in the monsoon area of the temperate zone on the globe. The well reserved primeval vertical distribution of natural landscape belts and the Natural Conservation of Changbai Mountains adopted by the UNESCO′s MAB Program cause the worldwide attention of geographers. Beside the complexity of the climatic structure itself, the mechanical effection of the high mountain body also effect the climate in the eastern part of China. In the mountain area where short of meteorological observation data, the climatic study by remote sensing is favorable for discovery and representation of climatic law in large area.

The Impact of Social Media on Dietary Behaviors and Body Image of College Students: A Qualitative Approach

Background: The use of social media platforms for health and nutrition information has become popular among college students. Although social media made information readily accessible in different formats, nutritional misinformation promoted by influencers and non-experts caused negative impact on diet behavior and perception of body image. Previous research indicated that extensive use of social media was positively linked to disordered eating behaviors. Social media platforms like Facebook and Instagram that allow users to follow celebrities intensified exposure to influencers’ messages and images and resulted in negative moods and body dissatisfaction. Objective: This paper aims to explore the impact of social media on college students’ dietary behaviors and body image. Participants: 18 undergraduate students from a public university in the Southern United States were recruited through a mass email. Methods: A cross-sectional qualitative study of three focus groups was conducted. The focus groups were based on guiding open-ended questions. Atlas.ti was used to code and analyze the data using inductive and deductive codes. Results: Three main themes were identified. The conditions theme included elements that explain why and how social media influences the participants’ actions. The actions theme included eating behavior, physical activity, and dietary supplement intake. The consequences theme describes anticipated or actual outcomes of actions such as body image and ideal weight. Conclusions: Social media has had a negative influence on diet behaviors and a positive influence on physical activity. Evidence-based nutrition and weight management information is needed to thwart potential misinformation.

Empirical Evidence for a Descriptive Model of Principles of Information Security Course

The purpose of this study is to examine the nature and content of the rapidly evolving undergraduate Principles of Information/Cybersecurity course which has been attracting an ever-growing attention in the computing discipline, for the past decade. More specifically, it is to provide an impetus for the design of standardized principles of Information/Cybersecurity course. To achieve this, a survey of colleges and universities that offer the course was conducted. Several schools of engineering and business, in universities and colleges across several countries were surveyed to generate necessary data. Effort was made to direct the questionnaire only to Computer Information System (CIS), Computer Science (CS), Management Information System (MIS), Information System (IS) and other computer-related departments. The study instrument consisted of two main parts: one part addressed the institutional demographic information, while the other focused on the relevant elements of the course. There are sixty-two (62) questionnaire items covering areas such as demographics, perception of the course, course content and coverage, teaching preferences, method of delivery and course technology deployed, assigned textbooks and associated resources, learner support, course assessments, as well as the licensure-based certifications. Several themes emerged from the data analysis: (a) the principles course is an integral part of most cybersecurity programs;(b) majority of the courses examined, stress both strong technical and hands-on skills;(c) encourage vendor-neutral certifications as a course exit characteristic;and (d) an end-of-course class project, remains a standard requirement for successful course completion. Overall, the study makes it clear that cybersecurity is a multilateral discipline, and refuses to be confined by context and content. It is envisaged that the results of this study would turn out to be instructive for all practical purposes. We expect it to be one of the most definitive descriptive models of such a cardinal course, and help to guide and actually, shape the decisions of universities and academic programs focusing on information/cyber security in the updating and upgrading their curricula, most especially, the foundational principles course in light of new findings that are herein articulated.

Modeling Method of Automotive Body CAN/LIN Nets Application Protocol Based on Object-oriented Colored Petri Net

Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.