The effect of heat treatment and thermal exposure on the microstructure and mechanical properties of non burning β titanium alloy Ti 25V 15Cr 2Al 0.2C (mass fraction, %) was investigated. It is found that the amount ...The effect of heat treatment and thermal exposure on the microstructure and mechanical properties of non burning β titanium alloy Ti 25V 15Cr 2Al 0.2C (mass fraction, %) was investigated. It is found that the amount of α precipitation in samples after solution treatment followed by air cooling increases with increasing solution temperature. After solution treatment, the alloy was subjected to two different heat treatments to stabilize the material. The results show that the single ageing treatment(700 ℃, 4 h, AC) leads to a large amount of α precipitation, while the triplex treatment(850 ℃, 2 h, FC+700 ℃, 6 h, FC+540 ℃, 6 h, AC) significantly suppresses the formation of α precipitates. It is more important that after long term exposure at 540 ℃(the expected application temperature) samples heat treated by the triplex treatment have markedly higher ductility than those given the single aging treatment. The intermetallic compound TiCr 2 is observed in samples after long term exposure, which further degrades the ductility of the alloy.展开更多
基金the financial support from the Fundamental Research Program of Shanxi Province,China(No.202203021211130)the National Natural Science Foundation of China(Nos.51801132,52075359)。
文摘The effect of heat treatment and thermal exposure on the microstructure and mechanical properties of non burning β titanium alloy Ti 25V 15Cr 2Al 0.2C (mass fraction, %) was investigated. It is found that the amount of α precipitation in samples after solution treatment followed by air cooling increases with increasing solution temperature. After solution treatment, the alloy was subjected to two different heat treatments to stabilize the material. The results show that the single ageing treatment(700 ℃, 4 h, AC) leads to a large amount of α precipitation, while the triplex treatment(850 ℃, 2 h, FC+700 ℃, 6 h, FC+540 ℃, 6 h, AC) significantly suppresses the formation of α precipitates. It is more important that after long term exposure at 540 ℃(the expected application temperature) samples heat treated by the triplex treatment have markedly higher ductility than those given the single aging treatment. The intermetallic compound TiCr 2 is observed in samples after long term exposure, which further degrades the ductility of the alloy.
