Analysis of users’ electricity consumption behavior based on ensemble clustering

Due to the increase in the number of smart meter devices,a power grid generates a large amount of data.Analyzing the data can help in understanding the users’electricity consumption behavior and demands;thus,enabling better service to be provided to them.Performing power load profile clustering is the basis for mining the users’electricity consumption behavior.By examining the complexity,randomness,and uncertainty of the users’electricity consumption behavior,this paper proposes an ensemble clustering method to analyze this behavior.First,principle component analysis(PCA)is used to reduce the dimensions of the data.Subsequently,the single clustering method is used,and the majority is selected for integrated clustering.As a result,the users’electricity consumption behavior is classified into different modes,and their characteristics are analyzed in detail.This paper examines the electricity power data of 19 real users in China for simulation purposes.This manuscript provides a thorough analysis along with suggestions for the users’weekly electricity consumption behavior.The results verify the effectiveness of the proposed method.

Hepatitis B Surface Antigen and Hepatitis C Virus Antibodies among Drug Users in Burkina Faso

Introduction: The epidemiology of both hepatitis B virus (HBV) and hepatitis C virus (HCV) infections among drug users (DUs) is little known in West Africa. The study aimed to assess the prevalence of hepatitis B and C viruses among drug users in Burkina Faso. Methodology: This was a cross-sectional biological and behavioral survey conducted between June and August 2022, among drug users in Ouagadougou and Bobo Dioulasso, the two main cities of Burkina Faso. A respondent-driven sampling (RDS) was used to recruit drug users. Hepatitis B surface antigen was determined using lateral flow rapid test kits and antibodies to hepatitis C virus in serum determined using an Enzyme-Linked Immunosorbent Assay. Data were entered and analyzed using Stata 17 software. Weighted binary logistic regression was used to identify the associated factors of hepatitis B and C infections and a p-value Results: A total of 323 drug users were recruited with 97.5% males. The mean age was 32.7 years old. The inhaled or smoked mode was the most used by drug users. The adjusted hepatitis B and hepatitis C prevalence among study participants were 11.1% and 2.3% respectively. The marital status (p = 0.001), and the nationality (p = 0.011) were significantly associated with hepatitis B infection. The type of drug used was not significantly associated with hepatitis B infection or hepatitis C infection. Conclusion: The prevalence of HBsAg and anti-HCV antibodies among DUs are comparable to those reported in the general population in Burkina Faso. This result suggests that the main routes of contamination by HBV and HCV among DUs are similar to those in the population, and could be explained by the low use of the injectable route by DUs in Burkina Faso.

Evaluation of an Autonomous Vehicle User Interface for Sensory Impaired Users

Autonomous vehicles (AVs) hold immense promises in revolutionizing transportation, and their potential benefits extend to individuals with impairments, particularly those with vision and hearing impairments. However, the accommodation of these individuals in AVs requires developing advanced user interfaces. This paper describes an explorative study of a multimodal user interface for autonomous vehicles, specifically developed for passengers with sensory (vision and/or hearing) impairments. In a driving simulator, 32 volunteers with simulated sensory impairments, were exposed to multiple drives in an autonomous vehicle while freely interacting with standard and inclusive variants of the infotainment and navigation system interface. The two user interfaces differed in graphical layout and voice messages, which adopted inclusive design principles for the inclusive variant. Questionnaires and structured interviews were conducted to collect participants’ impressions. The data analysis reports positive user experiences, but also identifies technical challenges. Verified guidelines are provided for further development of inclusive user interface solutions.

Reform of the Irrigation Sector and Creation of Functional and Sustainable Irrigation Water Users Associations (AUEI) in Niger: Capitalization of the Experience of the Konni AHA

During the 1980s, as part of a policy of liberalization, following budgetary cuts linked to the implementation of structural adjustment programs, management responsibilities for AHAs were transferred from ONAHA to cooperatives concerned. Due to lack of financial resources, but also because of poor management, everywhere in Niger we are witnessing an accelerated deterioration of the irrigation infrastructure of hydro-agricultural developments. Institutional studies carried out on this situation led the State of Niger to initiate a reform of the governance of hydro-agricultural developments, by streng-thening the status of ONAHA, by creating an Association of Irrigation Water Users (AUEI) and by restructuring the old cooperatives. Indeed, this research aims to analyze the creation of functional and sustainable Irrigation Water User Associations (AUEI) in Niger in a context of reform of the irrigation sector, and based on the experience of the Konni AHA. It is based on a methodological approach which takes into account documentary research and the collection of data from 115 farmers, selected by reasoned choice and directly concerned by the management of the irrigated area. The data collected was analyzed and the results were analyzed using the systemic approach and the diagnostic process. The results show that the main mission of the AUEI is to ensure better management of water, hydraulic equipment and infrastructure on the hydro-agricultural developments of Konni. The creation of the Konni AUEI was possible thanks to massive support from the populations and authorities in the implementation process. After its establishment, the AUEI experienced a certain lethargy for some time due to the rehabilitation work of the AHA but currently it is functional and operational in terms of associative life and governance. Thus, the constraints linked to the legal system, the delay in the completion of the work, the uncertainties of access to irrigation water but also the problems linked to the change in mentality of certain ONAHA agents constitute the challenges that must be resolved in the short term for the operationalization of the Konni AUEI.

Research on Interpolation Method for Missing Electricity Consumption Data

Missing value is one of the main factors that cause dirty data.Without high-quality data,there will be no reliable analysis results and precise decision-making.Therefore,the data warehouse needs to integrate high-quality data consistently.In the power system,the electricity consumption data of some large users cannot be normally collected resulting in missing data,which affects the calculation of power supply and eventually leads to a large error in the daily power line loss rate.For the problem of missing electricity consumption data,this study proposes a group method of data handling(GMDH)based data interpolation method in distribution power networks and applies it in the analysis of actually collected electricity data.First,the dependent and independent variables are defined from the original data,and the upper and lower limits of missing values are determined according to prior knowledge or existing data information.All missing data are randomly interpolated within the upper and lower limits.Then,the GMDH network is established to obtain the optimal complexity model,which is used to predict the missing data to replace the last imputed electricity consumption data.At last,this process is implemented iteratively until the missing values do not change.Under a relatively small noise level(α=0.25),the proposed approach achieves a maximum error of no more than 0.605%.Experimental findings demonstrate the efficacy and feasibility of the proposed approach,which realizes the transformation from incomplete data to complete data.Also,this proposed data interpolation approach provides a strong basis for the electricity theft diagnosis and metering fault analysis of electricity enterprises.

Harnessing overlapped temperature-salinity gradient in solar-driven interfacial seawater evaporation for efficient steam and electricity generation

Solar-driven interfacial water evaporation(SIWE)offers a superb way to leverage concentrated solar heat to minimize energy dissipation during seawater desalination.It also engenders overlapped temperaturesalinity gradient(TSG)between water-air interface and adjacent seawater,affording opportunities of harnessing electricity.However,the efficiency of conventional SIWE technologies is limited by significant challenges,including salt passivation to hinder evaporation and difficulties in exploiting overlapped TSG simultaneously.Herein,we report self-sustaining hybrid SIWE for not only sustainable seawater desalination but also efficient electricity generation from TSG.It enables spontaneous circulation of salt flux upon seawater evaporation,inducing a self-cleaning evaporative interface without salt passivation for stable steam generation.Meanwhile,this design enables spatial separation and simultaneous utilization of overlapped TSG to enhance electricity generation.These benefits render a remarkable efficiency of90.8%in solar energy utilization,manifesting in co-generation of solar steam at a fast rate of 2.01 kg m^(-2)-h^(-1)and electricity power of 1.91 W m^(-2)with high voltage.Directly interfacing the hybrid SIWE with seawater electrolyzer constructs a system for water-electricity-hydrogen co-generation without external electricity supply.It produces hydrogen at a rapid rate of 1.29 L h^(-1)m^(-2)and freshwater with 22 times lower Na+concentration than the World Health Organization(WHO)threshold.

Design Method for Optimizing the Interactive Interface of Live Broadcasting Platform for the Elderly Users

In the era of network live broadcasting for everyone,the development of live broadcasting platforms is also more intelligent and diversified.However,in the face of a large group of elderly users,the interface interaction design mode used is still mainly based on the interaction mode for young groups,and is not designed for elderly users.Therefore,a design method for optimizing the interaction interface of live broadcasting platform for elderly users was proposed in this study.Firstly,the case study method and Delphi expert survey method were used to determine the design needs of elderly users and the design mode was analysed.Secondly,the orthogonal design principle was used to design a test sample of the interactive interface of live broadcasting platform applicable for the elderly users,and then a user evaluation system was established to calculate the weights of the design elements using hierarchical analysis,and then the predictive relationship between the design mode of the interactive interface of live broadcasting platform and the elderly users was established by Quantitative Theory I.Finally,Genetic Algorithm was applied to generate the optimized design scheme.The results showed that the design method based on the Genetic Algorithm and the combination of Quantitative Theory can scientifically and effectively optimize the design of the interactive interface of the live broadcasting platform for the elderly users,and improve the experience of the elderly users.

Electricity Carbon Quota Trading Scheme based on Certificateless Signature and Blockchain

The carbon tradingmarket can promote“carbon peaking”and“carbon neutrality”at low cost,but carbon emission quotas face attacks such as data forgery,tampering,counterfeiting,and replay in the electricity trading market.Certificateless signatures are a new cryptographic technology that can address traditional cryptography’s general essential certificate requirements and avoid the problem of crucial escrowbased on identity cryptography.However,most certificateless signatures still suffer fromvarious security flaws.We present a secure and efficient certificateless signing scheme by examining the security of existing certificateless signature schemes.To ensure the integrity and verifiability of electricity carbon quota trading,we propose an electricity carbon quota trading scheme based on a certificateless signature and blockchain.Our scheme utilizes certificateless signatures to ensure the validity and nonrepudiation of transactions and adopts blockchain technology to achieve immutability and traceability in electricity carbon quota transactions.In addition,validating electricity carbon quota transactions does not require time-consuming bilinear pairing operations.The results of the analysis indicate that our scheme meets existential unforgeability under adaptive selective message attacks,offers conditional identity privacy protection,resists replay attacks,and demonstrates high computing and communication performance.

Rational design of natural leather-based water evaporator for electricity generation and functional applications

In recent years,water evaporation-induced electricity has attracted a great deal of attention as an emerging green and renewable energy harvesting technology.Although abundant materials have been developed to fabricate hydrovoltaic devices,the limitations of high costs,inconvenient storage and transport,low environmental benefits,and unadaptable shape have restricted their wide applications.Here,an electricity generator driven by water evaporation has been engineered based on natural biomass leather with inherent properties of good moisture permeability,excellent wettability,physicochemical stability,flexibility,and biocompatibility.Including numerous nano/microchannels together with rich oxygen-bearing functional groups,the natural leather-based water evaporator,Leather_(Emblic-NPs-SA/CB),could continuously produce electricity even staying outside,achieving a maximum output voltage of∼3 V with six-series connection.Furthermore,the leather-based water evaporator has enormous potential for use as a flexible self-powered electronic floor and seawater demineralizer due to its sensitive pressure sensing ability as well as its excellent photothermal conversion efficiency(96.3%)and thus fast water evaporation rate(2.65 kg m^(−2)h^(−1)).This work offers a new and functional material for the construction of hydrovoltaic devices to harvest the sustained green energy from water evaporation in arbitrary ambient environments,which shows great promise in their widespread applications.

Analyzing the Wind-Dominant Electricity Market under Coexistence of Regulated and Deregulated Power Trading

Currently,both regulated and deregulated power trading exist in China’s power system,which has caused imbalanced funds in the electricity market.In this paper,a simulation analysis of the electricity market with wind energy resources is conducted,and the calculation methods of unbalanced funds are investigated systematically.In detail,the calculation formulas of unbalanced funds are illustrated based on their definition,and a two-track electricity market clearing model is established.Firstly,the concept of the dual-track system is explained,and the specific calculation formulas of various types of unbalanced funds are provided.Next,considering the renewable energy consumption,the market clearing model based on DC power flow is constructed and solved;by combining fitting methods of mid-and long-term curves,the unbalanced funds are calculated based on clearing results and formulas.

Optimizing Household Wastes (Rice, Vegetables, and Fruit) as an Environmentally Friendly Electricity Generator

The high consumption of electricity and issues related to fossil energy have triggered an increase in energy prices and the scarcity of fossil resources.Consequently,many researchers are seeking alternative energy sources.One potential technology,the Microbial Fuel Cell(MFC)based on rice,vegetable,and fruit wastes,can convert chemical energy into electrical energy.This study aims to determine the potency of rice,vegetable,and fruit waste assisted by Cu/Mg electrodes as a generator of electricity.The method used was a laboratory experiment,including the following steps:electrode preparation,waste sample preparation,incubation of the waste samples,construction of a reactor using rice,vegetable,and fruit waste as a source of electricity,and testing.The tests included measuring electrical conductivity,electric current,voltage,current density,and power density.Based on the test results,the maximum current and voltage values for the fruit waste samples were 5.53 V and 11.5 mA,respectively,with a current density of 2.300 mA/cm^(2) and a power density of 12.719 mW/cm^(2).The results indicate the potential for a future development.The next step in development involves determining the optimum conditions for utilizing of rice,vegetable,and fruit waste.The results of the electrical conductivity test on rice,vegetable,and fruit waste samples were 1.51,2.88,and 3.98 mS,respectively,with the highest electrical conductivity value found in the fruit waste sample.

Analysis of Electricity Consumption Pattern Clustering and Electricity Consumption Behavior

Studying user electricity consumption behavior is crucial for understanding their power usage patterns.However,the traditional clustering methods fail to identify emerging types of electricity consumption behavior.To address this issue,this paper introduces a statistical analysis of clusters and evaluates the set of indicators for power usage patterns.The fuzzy C-means clustering algorithm is then used to analyze 6 months of electricity consumption data in 2017 from energy storage equipment,agricultural drainage irrigation,port shore power,and electric vehicles.Finally,the proposed method is validated through experiments,where the Davies-Bouldin index and profile coefficient are calculated and compared.Experiments showed that the optimal number of clusters is 4.This study demonstrates the potential of using a fuzzy C-means clustering algorithmin identifying emerging types of electricity consumption behavior,which can help power system operators and policymakers to make informed decisions and improve energy efficiency.

Energy Storage Operation Modes in Typical Electricity Market and Their Implications for China

As the Chinese government proposes ambitious plans to promote low-carbon transition,energy storage will play a pivotal role in China’s future power system.However,due to the lack of a mature electricity market environment and corresponding mechanisms,current energy storage in China faces problems such as unclear operational models,insufficient cost recovery mechanisms,and a single investment entity,making it difficult to support the rapid development of the energy storage industry.In contrast,European and American countries have already embarked on certain practices in energy storage operation models.Through exploration of key issues such as investment entities,market participation forms,and cost recovery channels in both front and back markets,a wealth of mature experiences has been accumulated.Therefore,this paper first summarizes the existing practices of energy storage operation models in North America,Europe,and Australia’s electricity markets separately from front and back markets,finding that perfect market mechanisms and reasonable subsidy policies are among the main drivers for promoting the rapid development of energy storage markets.Subsequently,combined with the actual development of China’s electricity market,it explores three key issues affecting the construction of costsharing mechanisms for energy storage under market conditions:Market participation forms,investment and operation modes,and cost recovery mechanisms.Finally,in line with the development expectations of China’s future electricitymarket,suggestions are proposed fromfour aspects:Market environment construction,electricity price formation mechanism,cost sharing path,and policy subsidy mechanism,to promote the healthy and rapid development of China’s energy storage industry.

Simulation and Analysis of Cascading Faults in Integrated Heat and Electricity Systems Considering Degradation Characteristics

Cascading faults have been identified as the primary cause of multiple power outages in recent years.With the emergence of integrated energy systems(IES),the conventional approach to analyzing power grid cascading faults is no longer appropriate.A cascading fault analysis method considering multi-energy coupling characteristics is of vital importance.In this study,an innovative analysis method for cascading faults in integrated heat and electricity systems(IHES)is proposed.It considers the degradation characteristics of transmission and energy supply com-ponents in the system to address the impact of component aging on cascading faults.Firstly,degradation models for the current carrying capacity of transmission lines,the water carrying capacity and insulation performance of thermal pipelines,as well as the performance of energy supply equipment during aging,are developed.Secondly,a simulation process for cascading faults in the IHES is proposed.It utilizes an overload-dominated development model to predict the propagation path of cascading faults while also considering network islanding,electric-heating rescheduling,and load shedding.The propagation of cascading faults is reflected in the form of fault chains.Finally,the results of cascading faults under different aging levels are analyzed through numerical examples,thereby verifying the effectiveness and rationality of the proposed model and method.

Electricity as an Energy Vector: A Performance Comparison with Hydrogen and Biodiesel in Italy

This study presents a comparative analysis of electricity, hydrogen, and biodiesel as energy vectors, with a focus on powering an aluminum smelter in southern Italy. It evaluates these vectors in terms of efficiency, land requirements for carbon-neutral energy production, and capital expenditure, providing insights throughout the entire supply chain (upstream, midstream, and downstream) into their feasibility for industrial applications. The research reveals that biodiesel, despite being carbon neutral, is impractical due to extensive land requirements and lower efficiency if compared to other vectors. Hydrogen, downstream explored in two forms as thermal power generation and fuel cell technology, shows lower efficiency and higher capital expenditure compared to electricity. Additionally, green hydrogen production’s land requirements significantly exceed those of electricity-based systems. Electricity emerges as the most viable option, offering an overall higher efficiency, lower land requirements for its green production, and comparatively lower capital expenditure. The study’s findings highlight the importance of a holistic assessment of energy vectors, considering economic, environmental, and practical aspects along the entire energy supply chain, especially in industrial applications where the balance of these factors is crucial for long-term sustainability and feasibility. This comprehensive analysis provides valuable guidance for similar industrial applications, emphasizing the need for a balanced approach in the selection of energy vectors.

Valorization of Agricultural Residues for Hydrogen-Based Electricity Generation towards Circular Bioeconomy

Global crises, notably climate shocks, degraded ecosystems, and growing energy demand, enforce sustainable production and consumption pathways. A circular bioeconomy offers the opportunities to actualize resource and eco-efficiency enhancement, valorization of waste streams, reduction of fossil energy and greenhouse gas (GHG) emissions. Albeit biomass resources are a potential feedstock for bio-hydrogen (bio-H2) production, Ghana’s agricultural residues are not fully utilized. This paper examines the economic and environmental impact of bio-H2 electricity generation using agricultural residues in Ghana. The bio-H2 potential was determined based on biogas steam reforming (BSR). The research highlights that BSR could generate 2617 kt of bio-H2, corresponding to 2.78% of the global hydrogen demand. Yam and maize residues contribute 50.47% of the bio-H2 produced, while millet residues have the most negligible share. A tonne of residues could produce 16.59 kg of bio-H2 and 29.83 kWh of electricity. A total of 4,705.89 GWh of electricity produced could replace the consumption of 21.92% of Ghana’s electricity. The economic viability reveals that electricity cost is $0.174/kWh and has a positive net present value of $2135550609.45 with a benefit-to-cost ratio of 1.26. The fossil diesel displaced is 1421.09 ML, and 3862.55 kt CO2eq of carbon emissions decreased corresponding to an annual reduction potential of 386.26 kt CO2eq. This accounts for reducing 10.26% of Ghana’s GHG emissions. The study demonstrates that hydrogen-based electricity production as an energy transition is a strategic innovation pillar to advance the circular bioeconomy and achieve sustainable development goals.

Wanting a Life in Decency!—A Qualitative Study from Experienced Electric Wheelchairs Users’ perspective

Background: The functionality and the safety of the electric wheelchairs were essential for users’ everyday life. Some evidence indicated that the wheelchair Per Se highly influenced users’ occupational life, their personal identity and social life;further, the wheelchair became an extension of the body and more than a technical device. Besides, there was still both environmental and self-efficacy or/and mental health factors obstacles for full social participation. Even so, there was to some extent stigma related to being a wheelchair user. There was a need to reflect users’ perspective on being depended on electric wheelchair. The aim, accordingly, was to describe and to get a deeper insight into electric wheelchairs users’ perspective and experiences of utilizing this device;a qualitative design with an inductive approach was used. Method: Qualitative latent and interpretative content analysis [1] [2] was used after repeated face-to-face semi-structured interviews with three experienced Swedish electric wheelchair users during the autumn 2017. Findings: The findings showed a high degree of dependability of the assistants that supported the users, and of the quality of that working relationship. The findings were formulated, abstracted and interpreted in several steps. It showed one theme of meaning: “Living in a space shifting between potential violation of or respect for human dignity”. Conclusion: The study showed that electric wheelchair users were relatively content with their lives as well as with their devices in turns of mobility and accessibility, but the meaning of their narrations showed a life at constant risk of having the respect of human rights and human respect violated. Besides, the importance of having access to good and high quality devices, good staffing, and environmental support, all in concordance with human rights, the clinical and practical implications of this study narrows down to a question of encountering the other person as a whole and worthy individual.

The Intersection of Privacy by Design and Behavioral Economics: Nudging Users towards Privacy-Friendly Choices

This paper conducts a comprehensive review of existing research on Privacy by Design (PbD) and behavioral economics, explores the intersection of Privacy by Design (PbD) and behavioral economics, and how designers can leverage “nudges” to encourage users towards privacy-friendly choices. We analyze the limitations of rational choice in the context of privacy decision-making and identify key opportunities for integrating behavioral economics into PbD. We propose a user-centered design framework for integrating behavioral economics into PbD, which includes strategies for simplifying complex choices, making privacy visible, providing feedback and control, and testing and iterating. Our analysis highlights the need for a more nuanced understanding of user behavior and decision-making in the context of privacy, and demonstrates the potential of behavioral economics to inform the design of more effective PbD solutions.

Enable Excel-Based Basic Cybersecurity Features for End Users by Using Python-Excel Integration

In the digital age, the global character of the Internet has significantly improved our daily lives by providing access to large amounts of knowledge and allowing for seamless connections. However, this enormously interconnected world is not without its risks. Malicious URLs are a powerful menace, masquerading as legitimate links while holding the intent to hack computer systems or steal sensitive personal information. As the sophistication and frequency of cyberattacks increase, identifying bad URLs has emerged as a critical aspect of cybersecurity. This study presents a new approach that enables the average end-user to check URL safety using Microsoft Excel. Using the powerful VirusTotal API for URL inspections, this study creates an Excel add-in that integrates Python and Excel to deliver a seamless, user-friendly interface. Furthermore, the study improves Excel’s capabilities by allowing users to encrypt and decrypt text communications directly in the spreadsheet. Users may easily encrypt their conversations by simply typing a key and the required text into predefined cells, enhancing their personal cybersecurity with a layer of cryptographic secrecy. This strategy democratizes access to advanced cybersecurity solutions, making attentive digital integrity a feature rather than a daunting burden.

Electricity generation during wastewater treatment by a microbial fuel cell coupled with constructed wetland

A membrane-less constructed wetland microbial fuel cell （CW-MFC） is constructed and operated under continuous flow with a hydraulic retention time （HRT） of 2 d. Fed with glucose, the CW-MFC generates a stable current density of over 2 A/m3 with a resistor of 1 kΩ and has a chemical oxygen demand （COD） removal efficiency of more than 90% after the startup of 2 to 3 d. A series of systems with the electrode spacings of 10, 20, 30 and 40 cm are compared. It is found that the container with the electrode spacing of 20 cm gains the highest voltage of 560 mV, the highest power density of 0. 149 W/m 3, and the highest Coulombic efficiency of 0.313%. It also has the highest COD removal efficiency of 94. 9%. In addition, the dissolved oxygen （DO） concentrations are observed as the lowest level in the middle of all the CW-MFC reactors. The results show that the more COD is removed, the greater power is generated, and the relatively higher Coulombic efficiency will be achieved. The present study indicates that the CW-MFC process can be used as a cost-effective and environmentally friendly wastewater treatment with simultaneous power generation.