CONVERSION OF SURGICALLY VERIFIED UNRESECTABLE TO RESECTABLE HEPATOCELLULAR CARCINOMA(A REPORT OF 26 PATIENTS WITH SUBSEQUENT RESECTION)

During the period 1978-1987, 255 patients with pathologically proven hepatocellular carcinoma (HCC) were determined by laparotomy to be un-resectable, 155 (60.8%) out of them had their tumor mainly confined in right or left lobe and considered to be potentially resectable if remarkable tumor shrinkage appears after treatment. Second look operation was performed in 26 (16.8%) out of the 155 patients after marked reduction of tumor size, resection was done in all of these 26 patients. Triple or quadruple combination treatment with hepatic artery ligation (HAL), hepatic artery infusion (HAI) with chemotherapy, radiotherapy using linear accelerator, and radioimmunotherapy using 131-I antihu-man HCC ferritin antibody yielded the highest conversion rate (29.8%, 14/47) as compared to double combination treatment with HAL+HAI, or cryosur-gery+HAL (16.9%, 12/71) and single treatment with HAL or HAI or HAE (embolization) (0%, 0/37). The median tumor size of these 26 patients was reduced from 9.5 cm to 5.0 cm after combination treatment. The median interval between the first laparotomy and the subsequent resection was 5.0 (2-16) months. The survival rates calculated by life table method were: 1-year 86.5%, 2-year 74.3% and 3-year 74.3%. Nine cases have survival more than 3 years. Thus, multimodality combination treatment with subsequent resection might prolong survival significantly for some patients with unresectable HCC particularly confined in right lobe of a cirrhotic liver.

Numerical Simulation for Remediation Planning for 1,4-Dioxane-Contaminated Groundwater at Kuwana Illegal Dumping Site in Japan Based on the Concept of Verified Follow Up

At Kuwana illegal dumping site in Japan, where hazardous waste was illegally dumped, groundwater was severely contaminated by Volatile Organic Compounds (VOCs). Groundwater was already remedied by conducting Pump-and-Treat (P&T) after containment of all the waste by vertical slurry walls from 2002 to 2007. However, 1,4-dioxane was detected in both waste and groundwater outside of slurry walls after it was newly added into Japan environmental standards in late 2009, which suggested that the walls did not contain 1,4-dioxane completely. Our previous study developed a model to predict the 1,4-dioxane distribution in groundwater after the previous remediation at the site. In this study, numerical simulation was applied for remediation planning at the site based on the concept of Verified Follow Up (VF-UP) that had been proposed as a new approach to complete remediation effectively with consideration of future risks. The amount of waste to be removed and pumping plans were discussed by numerical simulation to achieve the remedial objective in which 1,4-dioxane in groundwater outside of walls is remedied within 10 years and 1,4-dioxane spreading throughout the walls is prevented in the case where a portion of waste is remained. Firstly, the amount of waste to be removed considering pumping plans for P&T was determined by scenario analysis. As a result, at least two-third of waste should be removed by combining with P&T. However, if the waste is remained, future risks of 1,4-dioxane spreading through the slurry walls may occur. Our simulation suggested that groundwater within the remaining waste must be pumped up at least 20 m3/d for containment of 1,4-dioxane within the remaining waste. In conclusion, our numerical simulation determined the amount of waste to be removed and the pumping plans for P&T to achieve the remedial objective effectively considering future risks based on the concept of VF-UP.

Practicality of power load management system in Chongqing City verified

Began from early 1992, Chongqing Power Supply Bureau had spent 3 and half years to build up a power load management system consisting of I master station, 6 relay stations, 1280 terminals and the distributed monitoring device. This system distributes in the hilly and mountainous areas where geographically complicated and the load widely scatters, it can supervise about 72% load and curtail more than 15% load

Towards a verified compiler prototype for the synchronous language SIGNAL

SIGNAL belongs to the synchronous languages family which are widely used in the design of safety-critical real-time systems such as avionics, space systems, and nu- clear power plants. This paper reports a compiler prototype for SIGNAL. Compared with the existing SIGNAL com- piler, we propose a new intermediate representation （named S-CGA, a variant of clocked guarded actions）, to integrate more synchronous programs into our compiler prototype in the future. The front-end of the compiler, i.e., the transla- tion from SIGNAL to S-CGA, is presented. As well, the proof of semantics preservation is mechanized in the theo- rem prover Coq. Moreover, we present the back-end of the compiler, including sequential code generation and multi- threaded code generation with time-predictable properties. With the rising importance of multi-core processors in safety- critical embedded systems or cyber-physical systems （CPS）, there is a growing need for model-driven generation of multi- threaded code and thus mapping on multi-core. We propose a time-predictable multi-core architecture model in archi- tecture analysis and design language （AADL）, and map the multi-threaded code to this model.

A Composite Ansatz for Calculation of Dynamical Structure Factor

We propose an ansatz without adjustable parameters for the calculation of a dynamical structure factor.The ansatz combines the quasi-particle Green’s function,especially the contribution from the renormalization factor,and the exchange-correlation kernel from time-dependent density functional theory together,verified for typical metals and semiconductors from a plasmon excitation regime to the Compton scattering regime.It has the capability to reconcile both small-angle and large-angle inelastic x-ray scattering(IXS)signals with muchimproved accuracy,which can be used as the theoretical base model,in inversely inferring electronic structures of condensed matter from IXS experimental signals directly.It may also be used to diagnose thermal parameters,such as temperature and density,of dense plasmas in x-ray Thomson scattering experiments.

DNATyper^(TM)21与Verifiler^(TM)Plus试剂盒对常规案件检材检验的比较

本文通过比较DNATyper^(TM)21与Verifi ler^(TM)Plus两种STR检测试剂盒对各类案件检材的检验能力,探讨DNATyper^(TM)21试剂盒在常规案件检验中应用的可靠性。取0.03125、0.0625、0.125、0.25、0.5、1.0 ng/μL基因组标准品对两种试剂盒进行灵敏度测试;应用DNATyper^(TM)21与Verifi ler^(TM)Plus试剂盒分别对1056例常规案件检材DNA进行检验;对同一样本等位基因进行一致性比较。结果表明,两种试剂盒均可以成功检测出模板浓度在0.0625 ng/μL以上的标准DNA。在检验的1056例样本中,DNATyper^(TM)21试剂盒共检出881例,检出率为83.4%;Verifi ler^(TM)Plus试剂盒检出892例,检出率为84.5%。统计学结果表明两种试剂盒检出率无统计学差异,且同一样本相同基因座得到的等位基因分型一致。综上,DNATyper^(TM)21试剂盒对各类常规检材具有良好的检验能力,可应用于日常案件检验。

Establishment and validation of a predictive model for peripherally inserted central catheter-related thrombosis in patients with liver cancer

BACKGROUND Peripherally inserted central catheters(PICCs)are commonly used in hospitalized patients with liver cancer for the administration of chemotherapy,nutrition,and other medications.However,PICC-related thrombosis is a serious complication that can lead to morbidity and mortality in this patient population.Several risk factors have been identified for the development of PICC-related thrombosis,including cancer type,stage,comorbidities,and catheter characteristics.Understanding these risk factors and developing a predictive model can help healthcare providers identify high-risk patients and implement preventive measures to reduce the incidence of thrombosis.AIM To analyze the influencing factors of PICC-related thrombosis in hospitalized patients with liver cancer,construct a predictive model,and validate it.METHODS Clinical data of hospitalized patients with liver cancer admitted from January 2020 to December 2023 were collected.Thirty-five cases of PICC-related thrombosis in hospitalized patients with liver cancer were collected,and 220 patients who underwent PICC placement during the same period but did not develop PICC-related thrombosis were randomly selected as controls.A total of 255 samples were collected and used as the training set,and 77 cases were collected as the validation set in a 7:3 ratio.General patient information,case data,catheterization data,coagulation indicators,and Autar Thrombosis Risk Assessment Scale scores were analyzed.Univariate and multivariate unconditional logistic regression analyses were performed on relevant factors,and the value of combined indicators in predicting PICC-related thrombosis in hospitalized patients with liver cancer was evaluated using receiver operating characteristic(ROC)curve analysis.RESULTS Univariate analysis showed statistically significant differences(P<0.05)in age,sex,Karnofsky performance status score(KPS),bedridden time,activities of daily living impairment,parenteral nutrition,catheter duration,distant metastasis,and bone marrow suppression between the thrombosis group and the non-thrombosis group.Other aspects had no statistically significant differences(P>0.05).Multivariate regression analysis showed that age≥60 years,KPS score≤50 points,parenteral nutrition,stage III to IV,distant metastasis,bone marrow suppression,and activities of daily living impairment were independent risk factors for PICC-related thrombosis in hospitalized patients with liver cancer(P<0.05).Catheter duration of 1-6 months and catheter duration>6 months were protective factors for PICC-related thrombosis(P<0.05).The predictive model for PICC-related thrombosis was obtained as follows:P predictive probability=[exp(Logit P)]/[1+exp(Logit P)],where Logit P=age×1.907+KPS score×2.045+parenteral nutrition×9.467+catheter duration×0.506+tumor-node-metastasis(TNM)staging×2.844+distant metastasis×2.065+bone marrow suppression×2.082+activities of daily living impairment×13.926.ROC curve analysis showed an area under the curve(AUC)of 0.827(95%CI:0.724-0.929,P<0.001),with a corresponding optimal cut-off value of 0.612,sensitivity of 0.755,and specificity of 0.857.Calibration curve analysis showed good consistency between the predicted occurrence of PICC-related thrombosis and actual occurrence(P>0.05).ROC analysis showed AUCs of 0.888 and 0.729 for the training and validation sets,respectively.CONCLUSION Age,KPS score,parenteral nutrition,TNM staging,distant metastasis,bone marrow suppression,and activities of daily living impairment are independent risk factors for PICC-related thrombosis in hospitalized patients with liver cancer,while catheter duration is a protective factor for the disease.The predictive model has an AUC of 0.827,indicating high predictive accuracy and clinical value.

A verifiable essential secret image sharing scheme based on HLRs(VESIS-(t,s,k,n))

In traditional secret image sharing schemes,a secret image is shared among shareholders who have the same position.But if the shareholders have two different positions,essential and non‐essential,it is necessary to use essential secret image sharing schemes.In this article,a verifiable essential secret image sharing scheme based on HLRs is proposed.Shareholder's share consists of two parts.The first part is produced by the shareholders,which prevents the fraud of dealers.The second part is a shadow image that is produced by using HLRs and the first part of share.The verification of the first part of the shares is done for the first time by using multilinear and bilinear maps.Also,for verifying shadow images,Bloom Filters are used for the first time.The proposed scheme is more efficient than similar schemes,and for the first part of the shares,has formal security.

P_(c)(4457)Interpreted as a J^(P)=1/2+State by D^(0)∧_(c)^(+)(2595)-π^(0)P_(c)(4312) Interaction

P_(c)(4457)has been discovered over five years,but the parity of this particle remains undetermined.We propose a new interpretation for P_(c)(4457),which is the state generated from the coupled-channel D^(0)Ac+(2595)andπ^(0)P_(c)(4312)since they can exchange an almost on-shell∑_(c)^(+).In this scenario,the parity of P_(c)(4457)will be positive,which is different from the candidate of the bound state of D*∑_(c).The main decay channel of P_(c)(4457)in this model is Pc(4312)π.We propose three processes∧_(b)^(0)→J/ψKapπ^(-),∧_(b)^(0)→J/ψK-pπ^(0),and∧_(b)^(0)→J/ψpπ^(-)π^(+)k^(-)to verify Pc(4457)→Pc(4312)π.

Improved key exchange protocol for three-party based on verifier authentication

To prevent server compromise attack and password guessing attacks,an improved and efficient verifier-based key exchange protocol for three-party is proposed,which enables two clients to agree on a common session key with the help of the server.In this protocol,the client stores a plaintext version of the password,while the server stores a verifier for the password.And the protocol uses verifiers to authenticate between clients and the server.The security analysis and performance comparison of the proposed protocol shows that the protocol can resist many familiar attacks including password guessing attacks,server compromise attacks,man-in-the-middle attacks and Denning-Sacco attacks,and it is more efficient.

A Trust Management Scheme Based on Behavior Feedback for Opportunistic Networks

In the harsh environment where n ode density is sparse, the slow-moving nodes cannot effectively utilize the encountering opportunities to realize the self-organized identity authentications, and do not have the chance to join the network routing. However, considering m ost of the communications in opportunistic networks are caused by forwarding operations, there is no need to establish the complete mutual authentications for each conversation. Accordingly, a novel trust management scheme is presented based on the information of behavior feedback, in order to complement the insufficiency of identity authentications. By utilizing the certificate chains based on social attributes, the mobile nodes build the local certificate graphs gradually to realize the web of "Identity Trust" relationship. Meanwhile, the successors generate Verified Feedback Packets for each positive behavior, and consequently the "Behavior Trust" relationship is formed for slow-moving nodes. Simulation result shows that, by implementing our trust scheme, the d elivery probability and trust reconstruction ratio can be effectively improved when there are large numbers of compromised nodes, and it means that our trust management scheme can efficiently explore and filter the trust nodes for secure forwarding in opportunistic networks.

Vibration analysis of hard-coated composite beam considering the strain dependent characteristic of coating material

The strain dependent characteristics of hard coatings make the vibration analysis of hard-coated composite structure become a challenging task. In this study, the modeling and the analysis method of a hard-coated composite beam was developed considering the strain dependent characteristics of coating material. Firstly, based on analyzing the properties of hard-coating material, a high order polynomial was adopted to characterize the strain dependent characteristics of coating materials. Then, the analytical model of a hard-coated composite beam was created by the energy method. Next, using the numerical method to solve the vibration response and the resonance frequencies of the composite beam, a specific calculation flow was also proposed. Finally,a cantilever beam coated with Mg O ＋ Al2_O_3 hard coating was chosen as the study case; under different excitation levels, the resonance region responses and the resonance frequencies of the composite beam were calculated using the proposed method. The calculation results were compared with the experiment and the linear calculation, and the correctness of the created model was verified. The study shows that compared with the general linear calculation, the proposed method can still maintain an acceptable precision when the excitation level is larger.

Analytical and finite-element study of optimal strain distribution in various beam shapes for energy harvesting applications

Owing to the increasing demand for harvesting energy from environmental vibration for use in self-powered electronic applications, cantilever-based vibration energy harvesting has attracted considerable interest from various parties and has become one of the most common approaches to converting redundant mechanical energy into electrical energy. As the output voltage produced from a piezoelectric material depends largely on the geometric shape and the size of the beam, there is a need to model and compare the performance of cantilever beams of differing geometries.This paper presents the study of strain distribution in various shapes of cantilever beams, including a convex and concave edge profile elliptical beam that have not yet been discussed in any prior literature. Both analytical and finite-element models are derived and the resultant strain distributions in the beam are computed based on a MATLAB solver and ANSYS finite-element analysis tools. An optimum geometry for a vibration-based energy harvesting system is verified.Finally, experimental results comparing the power density for triangular and rectangular piezoelectric beams are also presented to validate the findings of the study, and the claim, as suggested in the literature, is verified.

Preliminary Experimental Study of Ion Beam Extraction of EAST Neutral Beam Injector

Neutral beam injection is recognized as one of the most effective means for plasma heating.The preliminary data of ion beam extraction is obtained on the EAST neutral beam injector test-stand.Beam extraction from the ion source of EAST-NBI is verified by measuring the beam current with a Faraday cup and by analyzing the results obtained by means of water calorimetric measurement on the temperature rises of water cooling the accelerator electrodes.

DIGITAL GENERATION OF TWO-DIMENSIONAL FIELD OF TURBULENCE FOR FLIGHT SIMULATION

In some special cases of flight simulation (e.g. for formation flight, in-flight tanking) it is required to generate a two-dimensional field of turbulence, in which the turbulent wind speeds are stochastic functions of two coordinates (e.g. x in the flight direction and y in the wing span direction). For this purpose a simple and efficient technique for the digital generation of a two-dimensional field of turbulence, i.e. for the production of turbulent speed sequences on a rectangular network, is proposed in this paper. The correlation of the turbulent field so generated is found to be in good agreement with the theoretical correlation of the turbulence model, and thus the feasibility of the proposed method is verified. Two possible operation modes (off-line and on-line) of the turbulence generator in flight simulation are also discussed.

STRUCTURAL STUDIES ON THE OLIGOMERS FROM THE POLYSACCHARIDE OF GRACILARIA TEXTORII (RHODOPHYTA) USING β-AGARASE AND 13C-NMR SPECTROSCOPY

The 60% ethanolic extract from Gracilaria textorii (Rhbdophyta) was degraded with B- agarase, and certain charged (sulfated) and neutral oligosaccharides were separated by using DEAE Sephadex A 25 and Bio- gel P6 , P2 chromatographic techniques . Some of the charged oligomers were verified to be neoagarotetraose - 63- sulfate ( DP2 ). neoagarohexaose- 63 】 65 - disulfate ( DP3 ) and neoagarooctaose- 63, 65, 67-trisulfate (DP4) by using 13C-and ’H-NMR spectroscopy . One neutral oligomer was assumed to be a mixture of methylated neoagarotetraoses (DP2 ) by 1H-NMR spectroscopy .These oligomers assigned by their chemical shifts may be used as the model compounds for the structural investigation of the agar- type sulfated polysaccharides using the B- agarase degradation method .

CLINICAL OBSERVATION ON OSTEOPOROSIS TREATED WITH TRADITIONAL KIDNEY-TONIFYING MEDICAMENTS

The method of scoring kidney deficiency symptoms and bone density was used to judge therapeutic efficacy on osteoporosis of traditional kidney-tonifying drugs. It was proved that the drugs not only improved clinical symptoms but also delayed the developmental pro-cess of this disorder. It also verified the correctness of the traditional theory that the kidney dominates the bone and generates the marrow.

The penetrating depth analysis of Lunar Penetrating Radar onboard Chang＇e-3 rover

Lunar Penetrating Radar（LPR） has successfully been used to acquire a large amount of scientific data during its in-situ detection. The analysis of penetrating depth can help to determine whether the target is within the effective detection range and contribute to distinguishing useful echoes from noise.First, this study introduces two traditional methods, both based on a radar transmission equation, to calculate the penetrating depth. The only difference between the two methods is that the first method adopts system calibration parameters given in the calibration report and the second one uses high-voltage-off radar data. However, some prior knowledge and assumptions are needed in the radar equation and the accuracy of assumptions will directly influence the final results. Therefore, a new method termed the Correlation Coefficient Method（CCM） is provided in this study, which is only based on radar data without any a priori assumptions. The CCM can obtain the penetrating depth according to the different correlation between reflected echoes and noise. To be exact, there is a strong correlation in the useful reflected echoes and a random correlation in the noise between adjacent data traces. In addition, this method can acquire a variable penetrating depth along the profile of the rover, but only one single depth value can be obtained from traditional methods. Through a simulation, the CCM has been verified as an effective method to obtain penetration depth. The comparisons and analysis of the calculation results of these three methods are also implemented in this study. Finally, results show that the ultimate penetrating depth of Channel 1 and the estimated penetrating depth of Channel 2 range from 136.9 m to 165.5 m（ε_r = 6.6） and from 13.0 m to 17.5 m（ε_r = 2.3）, respectively.

Differential temporal expression of matrix metalloproteinases following sciatic nerve crush

We previously performed transcriptome sequencing and found that genes for matrix metalloproteinases（MMPs）,such as MMP7 and 12,seem to be highly upregulated following peripheral nerve injury,and may be involved in nerve repair.In the present study,we systematically determined the expression levels of MMPs and their regulators at 1,4,7 and 14 days after sciatic nerve crush injury.The number of differentially expressed genes was elevated at 4 and 7 days after injury,but decreased at 14 days after injury.Among the differentially expressed genes,those most up-regulated showed fold changes of more than 214,while those most down-regulated exhibited fold changes of more than 2-10.Gene sequencing showed that,at all time points after injury,a variety of MMP genes in the “Inhibition of MMPs” pathway were up-regulated,and their inhibitor genes were down-regulated.Expression of key up-and down-regulated genes was verified by quantitative real-time polymerase chain reaction analysis and found to be consistent with transcriptome sequencing.These results suggest that MMP-related genes are strongly involved in the process of peripheral nerve regeneration.