Kink-band Kinematic Analysis and its Implications for Late-stage Deformation in the Internal Parts of the Zagros Collision(Sanandaj–Sirjan Zone) in West Iran

In the internal parts of the Zagros collision zone, several deformation phases have been superimposed. The early deformation phase caused the development of a penetrative foliation. The late-stage deformation phase was preferentially accommodated within shear zones and caused the generation of shear bands, implying a non-coaxial component of deformation, the end of this stage deformation was marked by the development of kink-bands. In the vicinity of Zagros suture zone, the kink angle increased from 40° to 60°, and the kink-bands was converted to chevron folds. In this region, the external(α) and internal(β) angular ratio is α/β ≠ 1 and kink angle increased, and deformation occurred with 10% to 30% volume loss. Farther from the suture zone in the east, α/β = 1;and total volume was constant or increased by 5% to 10%. Kink-bands kinematic analysis in the study area revealed this structures were sensitive to deformation conditions and components such that, with decreasing distance to the Zagros suture zone, shearing and rotation increased, a high kinematic vorticity dominated, and volume loss occurred during deformation.

Fracture characterization of Asmari Formation carbonate reservoirs in G Oilfield, Zagros Basin, Middle East

The Asmari Formation in the G oilfield on the Iran-Iraq border is a fractured-porous multi-lithology mixed reservoir, for which fracture is an important factor affecting oil productivity and water cut. The characterization and modeling of fractures in the carbonate reservoir of G oilfield are challenging due to weak conventional well log responses of fractures and a lack of specific logs, such as image logs. This study proposes an integrated approach for characterizing and modeling fractures in the carbonate reservoir. The features, formation mechanism, influencing factors, and prediction methods of fractures in the Asmari Formation carbonate reservoirs of G oilfield were studied using core observation, thin section, image log, cross-dipole acoustic log (CDAL), geomechanics numerical simulation (GNS), and production data. According to CDAL-based fracture density interpretation, GNS-based fracture intensity prediction between wells, and DFN-based rock fracture properties modeling, the quantitative fracture characterization for G oilfield was realized. This research shows that the fractures in the Asamri Formation are mainly medium-to high-angle shear fractures. The substantial compression stress during the Miocene played a major role in the formation of the prominent fractures and determined their trend in the region, with primary trends of NNW-SSE and NNE-SSW. The fracture distribution has regularity, and the fractures in zone A dolomites are more highly developed than that in zone B limestones vertically. Horizontally, fractures intensity is mainly controlled by faults and structural location. The results of this study may benefit the optimization of well design during field development. From 2019 to 2021, three horizontal wells pilot tests were deployed in the fractures belt in zone A, and these fractures prominently increased the permeability of tight dolomite reservoirs. The initial production of the wells is four to five times the average production of other wells in the area, showing a good development effect. Meanwhile, the updated numerical simulation validates that the history match accuracy of water cut based on the dual-porosity model is significantly improved, proving the fracture evaluation and prediction results to be relatively reliable and applicable.

Effect of tectonic-climatic controllers on the transition of Endorheic to Exorheic Basins in the Zagros mountain range

Endorheic basins(ENBs) are inland drainage basins allowing no outflow to oceans.These basins in the active mountain chains of the convergence zones are under the influence of compressional tectonic activity and climate condition.The Zagros Mountains of Iran is one of the youngest convergence zones in which continental-continental collision has occurred.In this paper we hypothesize the formation of ENBs among the Zagros range after the epeirogenic stage in the Late Paleogene-Early Neogene.Due to tectonic activity and Quaternary climatic conditions,the ENBs pass the transition stage to exorheic,and still,some tectonic depressions are not linked to the evolutionary process of exorheic drainage of Zagros.The geometry of the drainage network of Kul and Mond basins in Fars arch shows that 67% of their water gaps are located along the thrusts and transverse basement faults in the east and west of the Fars arch.Geometrically,the Kul and Mond basins form triangles with their sides matching with the edges of the Arabian Plate where the major inherited faults of Arabian plate controls the shape of the Zagros basin and a low strain zone along the Razak fault with lower salt tectonic activity,where the wind gaps are created.The ENBs are located in the rainshadow slopes,but the Kul and Mond basins are located in the upwind slopes of rain waves.This factor and the heavy rains of the basin lead to increase of the erosion potential,destruction of depressions,and floods and consequently,the funnel-shaped gaps have a significant impact on the flood flow.

伊朗Zagros盆地西南部白垩系Sarvak组碳酸盐岩储层特征

为了阐明伊朗Zagros盆地西南部白垩系Sarvak组碳酸盐岩储层特征,利用岩心、薄片、录井、试油及测井资料,通过储层岩性类型、储集空间、物性、电性特征及孔隙发育的影响因素分析,指出Zagros盆地西南部白垩系Sarvak组碳酸盐岩储层岩性类型有白垩质灰岩、云质灰岩、颗粒灰岩,储集空间类型多,主要为次生溶孔、铸模孔,其中颗粒灰岩的物性最好,白垩质灰岩中白垩质主要为浮游有孔虫,孔隙较发育,一般随物性增加,含油性级别升高。成岩作用对储层物性影响也较大,起建设性的成岩作用有溶蚀作用、白云化作用、生物扰动及压溶产生缝合线、缝合面。泥粒灰岩、粒泥灰岩在这些成岩作用的影响下,物性有较大改善。储层孔隙发育微观上主要受控于岩相、成岩作用,平面上还和构造位置及沉积环境有关,位于构造高部位的台地浅滩微相往往物性较好。利用垂向上测井响应及平面上小层物性分布特征,明确了物性较好、含油丰度较高的层段,为寻找高产有利储层提供了依据。

Diversity of woody plant species and their relationship to physiographic factors in central Zagros forests (Case study： Perc forest, Khorramabad, Iran)

Topography is the most factor that has the greatest impact of all factor that affect the distribution. To study the diversity of trees and shrub species in the Perc forest situated in Khorramabad, Lorestan, 140 circular plots of 1200 m2 in a grid of 300 m × 250 m were surveyed, using a systematic random sampling method. In each plot, the Margalef richness index, Shannon-Wiener diversity index, Hill＇s N1 and Simpson indices and the evenness index of Simpson and Smith-Wilson were calculated and ordered on the basis of different classes of elevation, exposition and slope. The results indicated that slope did not have any significant effect on the indices. Exposition and elevation classes significant impacted the richness and diversity indices, but did not influence evenness. In general, the highest plant diversity was observed for slopes less than 15 %, northern aspects, without geographical direction, and elevations of 2100-2200 m. This information can be very useful in achieving the goals for sustainable management of forests. In addition to greater protection for regions with high diversity and reforestation （compatible species） in degraded area, we can help increase diversity in forests.

Seismic Activity and Fractal Geometry of Kareh Bas Fault System in Zagros, South of Iran

Kareh Bas is one the transverse fault systems in Zagros fold-thrust belt. Kareh Bas Transcurrent Fault System with a total length of 200 Km is situated about 80 Km east of the Borazjan segment (a part of Kazerun fault zone) and 40 Km west of Shiraz. It is a nearly N-S trending right-lateral linked strike-slip fault system, and several anticlinal axes have been displaced by it. Strike separation (109 Km) of Mountain Front Fault/Flexure (MFF) of Zagros is the most important function of Kareh Bas Transcurrent Fault System. According to fractal analysis (Box-counting method) on space image maps (1:50,000) prepared from Spot data, fault related surface ruptures have non-linear patterns and fault segments have nearly plane form fractal dimensions;specially at north and south terminations. It means that, the north and south terminations of Kareh Bas Transcurrent Fault System are active (earthquake fault segments) and latter case is more active, because it is coinciding on Zagros mountain front faults (MFF).

Effect of land-use changes on chemical and physical properties of soil in western Iran(Zagros oak forests)

The consequence of land-use change from forest to agriculture and other uses has become one of the world’s greatest concerns.The soil,one of the most important components of forests and containing all the required plant nutrients as soluble ions,is highly impacted by these changes.Because vast areas of the Zagros forests in western Iran have changed in use during the last few decades,the present study investigated the effects of landuse changes of forest area to agriculture,orchard,and agroforestry on soil chemical and physical properties.Soil was sampled at four land-use areas:less-disturbed forest areas(control)and agricultural,orchard,and agroforestry areas.Among each of the two forest-use areas(agroforestry and orchard),we selected five trees with similar-sized crowns and sampled under each tree crown at 0-15 and>15-30 cm depths.Five soil samples also were taken in agriculture area at each depth.The findings indicated that during land-use changes,soil sand particles decreased,and clay and silt particles of soil increased,resulting in a fine soil texture.Moreover,the amount of nitrogen(N),phosphorus(P),organic carbon(OC),and electrical conductivity(EC)of soil decreased at both depths due to the decrease in organic matter.Soil pH and magnesium(Mg)level rose during land-use change at both depths except at agricultural sites.Soil potassium(K)content decreased during agricultural use due to the elimination of tree cover.The level of K decreased only at the depth of 0-15 cm because of K dependency on parent materials.Generally,most soil nutrients were affected by plant removal in the conversion.Forest and agricultural soil are distinguishable by their properties,while land-uses such as agroforestry-orchard separated from the others.Soil nutrients were severely affected by the decrease and elimination of tree cover,plowing,and continuous harvesting,resulting in a decline in soil quality and fertility.

Implication of Surface Fractal Analysis to Evaluate the Relative Sensitivity of Topography to Active Tectonics,Zagros Mountains, Iran

Fractal geometry is increasingly becoming a useful tool for modeling and quantifying the complex patterns of natural phenomena. The Earth's topography is one of these phenomena that have fractal characteristics. This paper investigates the relative sensitivity of topography to active tectonics using ASTER Global Digital Elevation Model. The covering divider method was used for direct extraction of surface fractal dimension(D surf) to estimate the roughness-surface of topography with aid of geographic information system(GIS)techniques. This evaluation let us highlight the role of the geomorphic and tectonic processes on the spatial variability of fractal properties of natural landforms.Geomorphic zones can be delineated using fractal dimension mapping in which variability of surface fractal dimension reflects the roughness of the landform surface and is a measure of topography texture. Obtained results showed this method can be a quick and easy way to assess the distribution of land surface deformation in different tectonic settings. The loose alluvial deposits and irregularities derived by tectonic activity have high fractal dimensions whereas the competent formations and higher wavelength folded surfaces have lower fractal dimensions.According to the obtained results, the Kazerun Fault Zone has a crucial role in the separation of the Zagros Mountain Ranges into the different lithological,geomorphological and structural zones.

Facies and Depositional Sequences of the Asmari Formation, Shajabil Anticline, North of the Izeh Zone, Zagros Basin, Iran

Outcrop and microscopic studies have been applied in this research paper in order to find out the Asmari Formation depositional sequences in the Shajabil Anticline section located at the north of the Izeh Zone,Zagros Basin,Iran.Five depositional sequences were identified based on 11 facies types （bioclast Nummulitidae Lepidocyclinidae packstone,bioclast perforate foraminifera Nephrolepidina Miogypsinoides wackestone-packstone,bioclast perforate foraminifera Corallinacea wackestone-packstone,bioclast echinoid Neorotalia Brachiopoda wackestone-packstone,coral floatstone-rudstone,bioclast Corallinacea imperforate foraminifera wackestone-packstone,bioclast imperforate foraminifera Archaias wackestone-packstone,bioclast imperforate foraminifera Dendritina wackestone-packstone-grainstone,bioclast imperforate foraminifera Borelis wackestonepackstone and very fine sandy mudstone） corresponding to the tidal flat,restricted and semirestricted lagoon and open marine environments of an inner and middle shelf areas.Well-exposed outcrop horizons of Thalassinoides at the study section are a favorable tool for the regional outcrop sequence stratigraphy.Thalassinoides is considered as an outcrop key-bed for recognition of the Rupelian-Chattian maximum flooding depositional sequence.Coral remnants （small colonies） in outcrop exposures also are associated with the HST depositional sequence （Chattian） for the Asmari Formation.The most important achievement of this research is use of associated maximum flooding surfaces （Pg30,Pg40,Pg50,Ngl0 and Ng20） in the Arabian plate.These maximum flooding surfaces could be recorded as an isochrones surface.

Effect of the Zagros Mountains on the Spatial Distribution of Precipitation

In order to examine the effect of the Zagros Mountains on precipitation, first, the annual and Seasonal rainfall indices （rain days frequency, rain amount, daily rainfall intensity, and heavy rains） from 43 stations in 1995 - 2004 between the 30° N to 35° N parallels over the mountain range were analyzed. Second, the effect of the Zagros Mountains was studied through the computation of the spatial correlations between the precipitation parameters and the topographic indices （station site elevation, station mean elevation within a radius of 2.5 km, mean elevation of 9 blocks along each of the eight Cartesian directions, and the elevation differences of these 9 blocks from the station mean elevation）. The results showed that in the cold season the maximal rainfall occurs on the upper range of west slope, while in warm season it spreads over the study area. The correlations between precipitation and elevation indices were positive on the north of the stations and negative on the south of the stations, that is, the higher elevations of the stations to the north force the uplifting of the moist air masses and increase rainfall at the stations, while the lower elevations to their south lead the movement of the moist air masses to the stations. This is due to the fact that these stations or slopes are exposed to the moist air masses coming from the Mediterranean Sea and the Persian Gulf. The heavy rain days and the summer sporadic rain events do not show significant correlations with the topographic indices. The findings indicate that the Zagros Mountains intensify the cold period frontal rains especially over the west slope and block the moist air masses from entering the interior parts of the country. Moreover, these mountains play a secondary role in creating rain days. But they are very important in the production of precipitation in the area. Therefore, their absence will decrease the amount of rainfall to their west and, in return, expand the dry climates of their west and east.

The Maastrichtian-Danian in the SW Zagros Fold-Thrust Belt(S. Iran):An Integration of Planktonic Foraminiferal Biostratigraphy and Gamma-Ray Spectrometry

In this study, the Maastrichtian-Danian boundary was measured and sampled in two stratigraphic sections, the north and south flanks of the Dehnow anticline in Coastal Fars, Southern Iran. This boundary was also investigated in the drilled exploratory well-1 in the same region. The lithology of the Maastrichtian-Danian deposits consists of glauconitic, phosphatic argillaceous limestones and marlstones. 30 genera and 77 species of planktonic foraminifera have been determined. The recognized biozones are the Gansserina gansseri Interval Zone, and the Contusotruncana contusa Interval Zone, which indicates latest Campanian to middle Maastrichtian age for the upper part of the Gurpi Formation. In addition, the Eoglobigerina edita(P1) Partial Range Zone, Praemurica uncinata(P2) Lowest Occurrence Zone, Morozovella angulata(P3) Lowest Occurrence Zone and Globanomalina psudomenardii(P4) Taxon Range Zone represent a Danian to Thanetian age for the lower part of the Pabdeh Formation. From the absence of the Abathomphalus mayaroensis Interval Zone, Pseudoguembelina hariaensis Interval Zone, Pseudotextularia elegans Interval Zone, Plummerita hantkeninoides Interval Zone, Guembelitria cretacea(P0) Partial Range Zone and Parvularugoglobigerina eugubina(Pα) Total Range Zone, it can be deduced that there is a paraconformity across the Maastrichtian–Danian boundary in the studied area, this hiatus encompassing the late Maastrichtian and the earliest Danian. Danian deposits from the study area contain reworked glauconitized macrofossils, planktonic and benthic foraminifera of the Cretaceous. The obtained surface gamma-ray spectrometry logs resemble the exploratory well-1 gamma-ray wireline log.

Boundary Between Upper Cretaceous and Lower Paleocene in the Zagros Mountain Ranges of Southwestern Iran

In the present study, over 3000 m of Upper Cretaceous sediments （Tarbur Formation） in seven stratigraphic, columnar sections were studied. The area is located in the Zagros mountain ranges of southwestern Iran, attributed to the converging continental Arabian Shield, and is interpreted as the result of subduction and collision. Based on foraminiferal studies of the Tarbur Formation in the sections, we have established many new biozones in the stratigraphic sections. However, investigations of the biozones indicate that there is no lithostratigraphic variation between the Upper Cretaceous and Lower Paleocene sediments in some of the studied sections. The concept of widespread formations and lithologic correlations is not applicable in this area, probably as a result of the tectonic unrest at that time. The biostratigraphic boundary between the Cretaceous and the Lower Paleocene is nevertheless well defined by the intraformational boundary in the sections.

Evidence of the formation of landslide-dammed lakes in the Zagros Mountains range,Iran

Alternation of high and low resistance sedimentary beds,active tectonics,large rivers,and slope erosion in valleys consequently resulted in landslide in dammed lakes within the Zagros range.This study presents the results in the analysis of geological and topographic data,satellite imageries,morphotectonics and hydrodynamics of drainage networks about the landslide dammed lakes.There are four landslides in central Zagros(Zagros FoldThrust Belt,ZFTB)which have formed five dammed lakes named,Seymareh,Jaidar,Shur,Shimbar,and Godar.According to the results,damming landslides occurred in the active-tectonic regions on the slopes of anticlines and in valleys with undercutting effects of rivers on their slopes consisting of alternations of loose and resistant beds.The studied landslide dams in narrow valleys are formed as a result of blocking river by sliding debris slopes and rock slides.This study also indicates the formation of Jaidar and Godar in one stage and the presence of Lake Terrace sequence in Seymareh,Shur and Shimbar lakes.The observed sequences of terrace formation in these lakes are caused by four Seymareh Landslides followed by the three-stage excavation of Shur andShimbar lakes.

The Unique Folding Style in the Zagros Simply Folded Belt, the Kuh-e Qazi Anticline, South Iran

The study area is located in the Zagros Simply Folded Belt of Iran and in the interior Fars sub-basin (175 km from Persian Gulf). The Zagros fold-thrust belt is home to one of the largest petroleum producing reservoirs in the world. Structures in this area have complications and the study anticline has unique structures in the Fars region. In the study area, the Kuh-e Qazi anticline due to special fold style and rotation toward Northeast is the unique structure between anticlines of the Zagros belt. This anticline is fault bend fold and plunge of the anticline in eastern part rotated toward Northeast along with the Nezamabad fault trend. In this area, the Kuh-e Qazi anticline has asymmetric structures and some faults such as the Nezamabad and the Sarvestan strike slip fault effect on this anticline. The geometry of anticlines in the Zagros fold-thrust belt is affected by the type of deformation and mechanical behavior of stratigraphic units specially detachment units. The purpose of this research is to determine of folding pattern of the Kuh-e Qazi anticline and define structural features affected on them in the study area. This paper presents a part of the results of a regional study of the Fars province in the Zagros Simply Folded Belt, based on original fieldwork, satellite images, structural sections, geological maps and well data. Also, we use some software as Global Mapper and Tectonics FP for preparing some data.?Based on the research, which have been done, the boundary between ductile and frictional substrates causes rotation as a result of lateral, along-strike migration of the ductile substrate. The ductile or viscose layer in the study area is Hormuz Series. Due to lack or thinning of Hormuz salt over the Gavbandi basement high and in the eastern side of the Nezamabad basement fault, causes translation of strain and anticlockwise rotation in Southeast of the Kuh-e Qazi anticline toward Northwest unlike foreland basin due to the Nezamabad fault activity. This style between all of the anticlines in the study area is unique that rotates unlike foreland basin. In addition, influence on anticlockwise rotation, extensional stress has been created and then salt dome cropping out in Southeast of the Kuh-Qazi anticline. One of the best evidence for effect of extensional stress is triangular facets in this part of the study anticline. Based on folding analysis (geometry of axial plane and fold orientation), it is clearly confirmed that the translation of strain and anticlockwise rotation in Southeast of the Kuh-e Qazi anticline toward Northwest has been formed by basement fault activity as the Nezamabad fault in the boundary between ductile and frictional substrates of the study area.

Correlations between various rock mass classification/characterization systems for the Zagros tunnel-W Iran

This study deals with the comparative investigation on various classification/characterization systems for sedimentary rocks in two parts,40 kmlong of the Zagros tunnel,west of Iran.The results of extensive geotechnical explorations and field measurements were applied to obtain the rock mass classification/characterization systems such as Rock Mass Rating(RMR),Rock Condition Rating(RCR),Q-system(Q),Rock Mass Number(QN),Rock Mass index(RMi),Rock Structure Rating(RSR),and Geological Strength Index(GSI)for a wide range of sedimentary rocks.A set of systems inter-relationship is proposed.Some of these correlation relations such as RMR-Q,RMR-RMi,RMi-Q,RCR,GSI-GSI(Cai)are similar to the one or more relations proposed in the previous studies,however,some of them such as RSR-RMR,RSR-Q,RCR-QN and GSI-RMR are not similar to the previous works.Joint set orientation and joint set number are more important parameters that cause weak correlation coefficients where both side classifications are not similar in considering them in calculating values.So it is proposed to find relations between any pairs of systems that both of them consider or not consider these parameters.The relations are proposed for a wide range of sedimentary rocks and can be applied for similar geological environments.

Effects of Persian turpentine tree litter and slope aspect on soil chemical properties in a Zagros forest,Iran

For analyzing the effects of forest litter and slope aspect on soil properties eight soil samples were collected at a depth of 0–10 cm near(i.e.,beneath the crown)and away from(i.e.,not influenced by crown)five Persian turpentine trees each on a north and a south slope at the same elevation in a Zagros forest,Iran.The litter beneath tree crowns and slope exposure were found to have significant interactive effects on C,N,P,K,and electrical conductivity of the soils,however,Ca,Mg and the soil pH were not significantly influenced by these factors.The soil beneath the crowns was enriched in cations compared to more distal positions.Generally,Persian turpentine trees have positive impacts on soil properties in the forest.Degrading or killing these trees by sap extraction,extreme grazing,cutting,fire and expansion of agriculture will lead to significant losses in soil fertility and increases in soil erosion.

Folding Style of the Kuh-e Siah Anticline in the Sarvestan Area, Interior Fars, Zagros, Iran

The Kuh-e Siah anticline is located in the Sarvestan area of the Fars province (186 km to Persian Gulf) and Interior Fars sub basin. This anticline is a fault bend fold and is located in the Sarvestan fault zone with Northwest-Southeast trend. The Sarvestan fault zone has caused main deformation by dextral strike slip activity in southern part of the Zagros fold-thrust belt. The main aim of this paper is to determine of fold style elements and folding pattern of the Kuh-e Siah anticline. This paper presents part of the results of a regional study of the Fars province in the Zagros Simply folded belt, based on original fieldwork, satellite images, structural sections, geological maps and well data. In addition, we used some software as Global Mapper and Tectonics FP for prepared some data. Folds, which are close sideways, are neutral and these require special attention. It is remarkable that, in all sections of the Kuh-e Siah anticline, fold type is close and in the middle part of the anticline, fold type is different with other parts. In the middle part, fold type is upright-moderately gently plunging. On the other hand, in northwestern and southeastern parts fold type is similar together. These results maybe show that fold style follow that fold sigmoidal shape that created with two-fault segment of the Sarvestan fault zone in the study area. Therefore, it seems that the Kuh-e Siah anticline has suffered high deformation in the Sarvestan fault zone and this fault zone has created shear zone.

The Elements of Fold Style Analysis in the Khaftar Anticline, Zagros, Iran

The Study area is located in the Zagros Simply Folded Belt of Iran and in the interior Fars sub-basin. The Khaftar anticline is located in the West, North-West of Jahrom city in the Fars province (148 km distance from Persian Gulf). The trend of Khaftar anticline has three orientations, consist of North-Northeast, East-West and South-Southwest. This anticline has asymmetric structure and some faults with large strike separation observed in this anticline. In the study area, stratigraphic units are affected by many faults in this area. Also one salt plug cropping out in the middle part of the Khaftar anticline. Maybe this salt plug affected on the stratigraphic units and geometry of structure. Description of fold geometry is important because it allows comparisons within and between folds and allow us to recognize patterns in the occurrence and distribution of fold systems. The main aim of this paper is determination of fold style elements and folding pattern of the Khaftar anticline. This paper presents a part of the results of a regional study of the Fars province in the Zagros Simply folded belt, based on satellite images, geological maps, and well data. Some data, such as geological maps and geological regional data were prepared and provided by the National Iranian Oil Company (NIOC). Because of the Khaftar anticline, has complex structure, the analysis of fold style elements is seems necessary. Therefore, in further studies on this structure the changes of fold style elements will be analyzed and investigated from east to west in the different parts of this anticline. The activity of Nezamabad sinistral strike slip fault in the Khaftar anticline causes changes of axial plane characteristics and fold axis. Some of the results such as folding style analysis, how position of salt plug, changes of fold type and main structural changes (rotation of fold axis and 2.5 km displacement in this anticline) show main changes in the middle parts of the Khaftar anticline. It seems that, these changes have formed by activity of the Nezamabad fault and this fault’s activity same as fault zone.

Earthquake Hazard Zonation and Seismotectonics of the Bandar Abbas Area, Zagros, Iran

The study area (Bandar Abbas area) is located in the Zagros fold-thrust belt as part of the Alpine-Himalayan orogenic belt as seismically active belt. This area is located between the Makran accretionary prism and Oman Mountains from east and the Zagros collision belt from west as transition zone. The Zagros fold-thrust belt from the viewpoint of seismicity, is very active and Iran’s major earthquake-prone area. The study area has main active faults and some high magnitude earthquakes occurred in current century. Because the Bandar Abbas area has high seismic activity, the main goal of this research is prepared to earthquake hazard zonation and identify hazardous seismic zones, based on Decision Support System method for define active seismotectonic in this area. The seismotectonic study has been done in 30 - 100 km radius, for Bandar Abbas area. In this research, we used Decision Support System method by in corporate and combine essential data such as seismic data from 1900-2015, Digital Elevation Model of the study area (DEM), surface geology, seismicity parameters, soil classification and location main faults. In this research the Decision Support System (DSS) base on GIS database is used for calculate seismicity parameters. Based on the relative risk of earthquake zonation map, the Bandar Abbas area is located from the north to the East and from the South to the East, in area with high seismic risk (with Orange color). Some small regions with very high relative seismic risk have been limited to these areas with high risk. Also from north to west and from south to west “the study area” is located mainly in the area with earthquake relative risk of in areas with moderate and low relative risk of earthquakes. In the far southwestern region of the study, the small area is located in an area with high and very high seismic relative risk and this case may be due to the activity of the Mountain Front Fault (MFF) and Zagros Fore deep Fault (ZFF). Finally, the study area has been affected by active faults and it causes high vulnerability of the study area in the face of a possible occurrence of earthquakes. Based on of Seismotectonic investigations, there are existed minor faults of the Zagros fault from East to West and in the middle part. This case has been caused some parts in the study area with low and moderate seismic risk to be considered in the face of possible earthquakes and seismic damages, as an area with high seismic risk.

A new sampling method in the Zagros forests using GIS(case study: Ilam forests of Iran)

One of the basic parameters in forest management planning is detailed knowledge of growing stock,information collected by forest inventory.Sampling methods must be accurate,inexpensive,and be easy to implement in the field.This study presents a new sampling method called branching transect for use in the Iranian Zagros forests and similar forests.Features of the new method include greater accuracy,easy implementation in nature,simplicity of statistical calculations,and low cost.In this method,transect is used,which includes some subtransects(side branches).The length of the main transect,side branches,number of trees measured in each side branch,and the number of sub-branches in this method are changeable based on homogeneity,heterogeneity,and density of a forest.In this study,based on the density and heterogeneity of the forest area studied,20-m transects with four and eight side branches were used.Sampling plots(Transects)in four inventory networks(100 m×100 m,100 m×150 m,150 m×150 m and 100 m×200 m)were implemented in the GIS environment.The results of this sampling method were compared to the results of total inventory(100%count)in terms of accuracy,precision(t-test),and inventory error percentage.Branching transect results were statistially similar to total inventory counts in all cases.The results show that this method of estimating density and canopy per hectare can be used in Zagros forests and similar forests.