PRECIPITATION AND GROWTH OF PEROVSKITE PHASE IN TITANIUM BEARING BLAST FURNACE SLAG

The effects of transformation of slag composition and additive agents on the morphology, the precipitation behavior, the crystal growth, and the volume fraction (VF) of perovskite (CaO·¤TiO_2) crystal in the Ti-bearing blast furnace slags were investigated. As the morphology of perovskite is dispersed in molten slags, the crystal growth mechanism of the melting of fine dendrites and the coarsening of large grains exist throughout the solidification of molten slags. With the increase of CaO and Fe_2O_3 content, VF of perovskite obviously increases. However, high basicity leads to the viscosity of slag, which results in the reduction of the average equivalent diameter (AED). The experimental results showed that the presence of the additives CaF_2 and MnO efficiently decreased the viscosity of the slags, and obviously improved the morphology of perovskite and promoted its growth.

Preparation of Controllable Cross-Linking Polyethylene Foaming Materials and Their Properties

In order to prepare the polyethylene materials with controlling properties,we developed two kinds of controllable cross-linking polyethylene foaming system.2,5-dimethyl-2,5-bis (tert-butyl peroxy) hexane was used as cross-linking agent and TEMPO as cross-linking inhibitor,azodicarbonamide (AC) was used as foaming agent and citric acid as foaming promoter.The density,expansion ratio,cellular structure and mechanical property of these two kinds of controllable materials were studied.Experimental results show that,properties of these two kinds of materials appear similar trend:cellular size and expansion ratio are enlarged with the amount of cross-linking inhibitor or foaming promoter increasing,while density and mechanical strength appear decreasing trend.Through comparing those two material systems’ properties,cross-linking polyethelene foaming system with citric acid as foaming promoter has better properties.

Experimental study on agitated drying characteristics of sewage sludge under the effects of different additive agents

Drying experiments of dewatered sewage sludge（DSS） were conducted on a agitated paddle dryer, and the effects of additive agents, i.e., CaO, pulverized coal（PC）, heavy oil（HO）, and dried sludge（＂DS＂ through back mixing） on the agitated drying characteristics of DSS were investigated. The results indicated that CaO can significantly increase the drying rate of DSS.The drying rate at CaO/DSS（mass ratio） = 1/100 was 135% higher than that of CaO/DSS = 0.Pulverized coal has no obvious effect on drying rate, but the increase of PC/DSS can promote breaking up of sludge lump. Heavy oil was found to be slightly effective in improving the drying rate of DSS in the examined experimental range of HO/DSS = 0-1/20. It is also found that HO can reduce the torque of the dryer shaft, due to its lubrication effect. Back mixing of DS was found to be effective in alleviating the unfavorable effect of the lumpy phase by improving the mixing effect of the paddle dryer. There was a marked increase of drying rate with an increase of the DS/DSS in the experimental range of DS/DSS = 0-1/3.