A comparative study for petroleum removal capacities of the bacterial consortia entrapped in sodium alginate,sodium alginate/poly(vinyl alcohol),and bushnell haas agar

The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.

Separation Performance of Sodium Alginate/Poly(Vinyl Pyrrolidone)Membranes for Aqueous/Dimethylformamide Mixtures by Vapor Permeation and Vapor Permeation with Temperature Difference Methods

In this study sodium alginate (NaAlg)/poly (vinyl pyrrolidone) (PVP) blend membranes were prepared and crosslinked with CaCl2 (0.1 Molarity (M)) for the separation of aqueous/dimethylformamide (DMF) mixtures. Membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and their performance was examined by varying experimental parameters such as feed composition (0 - 100 wt%), operating temperature (30℃ - 50℃) and membrane thickness (30 - 90 micrometer (μm)). Blending NaAlg with PVP, decreased separation factor whereas increased the permeation rate as the permeation temperature was increased in Vapor Permeation (VP) and Vapor Permeation with Temperature Difference (TDVP) methods. In the TDVP method, the separation factors increased and the permeation rates decreased as the temperature of the membrane surrounding is decreased. The highest separation factor of 60 was obtained in TDVP method for 90 wt% DMF concentration in the feed.

Improving physical properties of poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels via the Hofmeister effect

Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits their practical applications.Herein,we present a Hofmeister effect-aided facile strategy to prepare high-performance poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels.Layered montmorillonite nanosheets can not only serve as crosslinking agents to enhance the mechanical properties of the hydrogel but also promote the ion conduction.More importantly,based on the Hofmeister effect,the presence of(NH_(4))_(2)SO_(4)can endow nanocomposite hydrogels with excellent mechanical properties by affecting PVA chains'aggregation state and crystallinity.As a result,the as-prepared nanocomposite hydrogels possess unique physical properties,including robust mechanical and electrical properties.The as-prepared hydrogels can be further assembled into a high-performance flexible sensor,which can sensitively detect large-scale and small-scale human activities.The simple design concept of this work is believed to provide a new prospect for developing robust nanocomposite hydrogels and flexible devices in the future.

Graphene quantum dots doped poly(vinyl alcohol)hybrid membranes for desalination via pervaporation

Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.

Effect of Sodium Alginate Concentration on Membrane Strength and Permeating Property of Poly-l-arginine Group Microcapsule

A novel poly-/-arginine microcapsule was prepared due to its nutritional function and pharmacological efficacy. A high-voltage electrostatic droplet generator was used to make uniform microcapsules. The results show that the membrane strength and permeating property are both remarkably affected with the changes of sodium alginate concentration. With the sodium alginate concentration increasing, gel beads sizes increase from 233μm to 350μm, release ratio is also higher at the same time, but the membrane strength decreases.

Amphiphilic sodium alginate-vinyl acetate microparticles for drug delivery

To overcome the fast or burst release of hydrophilic drugs from hydrophilic alginate-based carriers,hydrophobic molecule(vinyl acetate,VAc)was grafted on alginate(Alg),which was further used to prepare drug carriers.Amphiphilic Alg-g-PVAc hydrogel beads were firstly prepared by emulsification/internal gelation technique for the loading of bovine serum albumin(BSA).Then,chitosan was coated on the surface of beads to form novel amphiphilic Alg-g-PVAc/chitosan(Alg-g-PVAc/CS)microcapsules.The BSA-loading amphiphilic Alg-g-PVAc/chitosan(Alg-g-PVAc/CS)microcapsules display similar morphology and size to the hydrophilic alginate/chitosan(AC)microcapsules.However,the drug loading and loading efficiency of BSA in Alg-g-PVAc/CS microcapsules are higher,and the release rate of BSA from Alg-g-PVAc/CS microcapsules is slower.The results demonstrate that the introduction of hydrophobic PVAc on alginate can effectively help retard the release of BSA,and the higher degree of substitution is,the slower the release rate is.In addition,the complex membrane can also be adjusted to delay the release of BSA.As a whole,amphiphilic sodium alginate-vinyl acetate/CS microparticles could be developed for macromolecular drug delivery.

Innovative approach to boosting the chemical stability of AZ31 magnesium alloy using polymer-modified hybrid metal oxides

Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.

Comparison of different cationic polymers efficacy in fabrication of alginate multilayer microcapsules

In past decades, alginate-based multilayer microcapsules have been given important attention in various pharmaceutical investigations. Alginate-poly l lysine-alginate(APA) is studied the most. Due to the similarity between the structure of polyethyleneimine(PEI) and poly-L-lysine(PLL) and also lower price of PEI than PLL, this study was conducted to compare the efficacy of linear(LPEI) and branch(BPEI) forms of PEI with PLL as covering layers in fabrication of microcapsules. The microcapsules were fabricated using electrostatic bead generator and their shape/size, surface roughness, mechanical strength, and interlayer interactions were also investigated using optical microscopy, AFM, explosion test and FTIR, respectively. Furthermore, cytotoxicity was evaluated by comparing the two anionic final covering layers alginate(Alg) and sodium cellulose sulphate(NCS) using MTT test. BPEI was excluded from the rest of the study due to its less capacity to strengthen the microcapsules and also the aggregation of the resultant alginate-BPEI-alginate microcapsules, while LPEI showed properties similar to PLL. MTT test also showed that NCS has no superiority over Alg as final covering layer. Therefore, it is concluded that, LPEI could be considered as a more cost effective alternative to PLL and a promising subject for future studies.

Cloning and characterization of a new endo-type polyG-specific alginate lyase from bacteria Vibrio sp. QD-5

Seven bacterial clones with alginate-utilizing activity were isolated from rotten kelp. By activity test, the Vibrio sp. QD-5 with the potential alginate-degrading capability was chosen to carry out the draft genome sequencing, and the result showed that the Vibrio sp. QD-5 containing an alginate lyase gene cluster. One of these genes, aly-IV, was cloned and characterized for the first time. After overexpression, Aly-IV, with a molecular mass of about 62 kDa and a theoretical isoelectric point (pI) of 5.12, was purified to a specific activity of 1 256.78 U/mg and showed highest activity at 35°C in the Tris-HCl buffer at pH of 8.9. Moreover, the enzyme activity was enhanced by the metal ions of Na+, K+ and Mg2+ under certain concentration. Aly-IV degraded favorably polyG blocks in an endo-type, yielding monomer and dimer as the main products. Due to its high substrate specificity, Aly-IV could be used as a potential tool for production of polyG oligosaccharides with low degree of polymerization (DP) and for determining the fine structure of alginate.

Rare Earth Stearates as Thermal Stabilizers for Rigid Poly(vinyl chloride)

A series of stearates with different rare-earth ion were investigated as thermal stabilizers for rigid PVC at 180 ℃ in air. Their stabilizing efficiency was based on measuring the rate of dehydrochlorination. The resulted revealed the higher stabilizing efficiency of the investigated rare-earth stearates as thermal stabilizers for rigid PVC compared with the thermal stabilizers for industry: calcium stearate, zinc stearate, butyl stannum mercaptide, phosphite esters, β-diketone and epoxidized sunflower oil. This was well illustrated by longer incubation period (T_S) values and lower rate of dehydrochlorination. The stable efficiency was affected by the nature of rare-earth element's individual electronic shell. The mechanism for the stabilizing effect of rare-earth stearates was proposed. The result was experimentally proved based on IR spectrum.

Controlled delivery of ibuprofen from poly(vinyl alcohol)-poly(ethylene glycol) interpenetrating polymeric network hydrogels

Hydrogels composed of poly(vinyl alcohol)(PVA) and poly(ethylene glycol)(PEG) were synthesized using glutaraldehyde as crosslinker and investigated for controlled delivery of the common anti-inflammatory drug, ibuprofen(IBF). To regulate the drug delivery, solid inclusion complexes(ICs) of IBF in β–cyclodextrin(β–CD) were prepared and added to the hydrogels. The ICs were prepared by the microwave irradiation method, which is more environmentally benign. The formation of IC was confirmed by various analytical techniques and the synthesized hydrogels were also characterized. Controlled release of drug was achieved from the hydrogels containing the ICs in comparison to the rapid release from hydrogels containing free IBF.The preliminary kinetic analysis emphasized the crucial role of β–CD in the drug release process that influences the polymer relaxation, thereby leading to prolonged release. The cytotoxicity assay validated the hydrogels as non-toxic in nature and hence can be utilized for controlled delivery of IBF.

Creep Behaviour of Wood Flour/Poly(vinyl chloride) Composites

The experimental creep data were focused on wood-flour （WF）/poly vinyl chloride （PVC） composites with the variations in additive concentrations of wood flour, silane coupling agent, organomodified montmorillonite （OMMT） and nano-cacium carbonate （nano-CaCO3）. Their effects were analyzed using the Four-element Burger Model incorporating microscopic mechanisms. Total creep strain was low with increasing WF while elastic strain was high and plastic flow strain was low in modeling. Modification of WF with silane was beneficial to creep resistance, so did adding low ratio of OMMT （1.5 wt%） and nano-CaCO3 in composites. Thus, it was effective in reducing creep either by stiffening the PVC matrix using rigid nano-particles or by improving their adhesion with resin. However, superfluous quantity of any additament did not benefit the improvement owing to either earlier destruction of their agglomerates or stress-concentrated cracks in the over-incrassated interface.

A Hybrid Membrane of Poly(vinyl alcohol) and Phosphotungstic Acid for Fuel Cells

Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embedded are stable in the PVA matrix when the membrane is immerged in water or methanol solution atroom temperature. Conductivity of the composite membranes scatters around 10-3 S.cm-1 at room temperature.The methanol crossover through the membranes is about an order of magnitude lower than that through Nafion117 membrane.

Compatibility and Properties of Biodegradable Blend Films with Gelatin and Poly(vinyl alcohol)

The blend films with gelatin and poly（vinyl alcohol） （PVA） were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-transform infrared spectroscopy （FTIR）, x-ray diffraction （XRD）, thermogravimetry analysis （TG）, and differential scanning calorimetry （DSC） were employed to characterize the resultant blend films. According to optic result, the opacity of the blend film at the ratio of 20/80 （w/w, Gel to PVA） was the lowest, indicating the best compatibility between Gel and PVA at the ratio. The results oflR, XRD, DSC, and TG revealed an intensive interaction and good compatibility between them in the blend film at the ratio. The mechanical properties and solubility showed that PVA content in the blend films obviously affected the elongation at break and solubility. The mechanical properties and water resistance of gelatin film may be improved by the introduetion of PVA.

CHEMICAL MODIFICATION OF THE SURFACE OF CALCIUM ALGINATE GEL BEADS

The chemical modification of the surface of calcium alginate gel beads (CAGB) via grafting copolymerization with vinyl acetate (VAc) was studied. The optimum reaction conditions with activation and graft copolymerization two steps were explored. First, 5 grams CAGB with 2.5 mm initial diameter was initiated with 0.0493 mol/L K2S2O8 at 51 °C for 30 min in 15 mL 1 % PVA/H2O. Then 4.34 moi/L VAc was added dropwise and the reaction was allowed to proce at 48 °C for 3 h. The grafting efficiency could come up to 30%. It was found the stability of modified CAGB in the air and in electrolyte solutions was greatly improved.

Antiplasticizing Effect of MOCA on Poly(vinyl chloride)

An obvious antiplasticizing effect has been observed in PVC with small amount of MOCA, 3,3’-dichloro-4,4’-diamino-diphenylmethane. PVC-MOCA interaction and crystallization behavior of PVC/MOCA blends were investigated in detail to explain the mechanism of antiplasticization on the basis of a series of techniques including DMA, FTIR, and DSC. The results of mechanical properties tests show that the tensile strength of PVC with 5 phr of MOCA reaches a maximum value, 69.5 Mpa, which is about 23 % higher than that of pure PVC. The rise in tensile strength was attributed to an antiplasticizing effect of MOCA on PVC as confirmed by DMA measurements. The evidences from FTIR reveal that a strong hydrogen-bonding interaction takes place between the nitrogen atom of –NH2 groups in MOCA and the methine proton of PVC repeat units. The results of DSC analysis indicate that crystallization behavior of MOCA is suppressed completely and the crystallinity of PVC decreases with the increase of MOCA amount.

Influence of Annealing and Additives on the Crystallization Behavior and Properties of Poly(vinyl chloride)

Acetanilide （AC）, adipic acid （AA） and potassium hydrogen phthalate （PHP） were chosen as additives to accelerate PVC crystallization and improve its mechanical properties. The influences of the additives and annealing on the crystallization behavior, micromorphology and the tensile properties were investigated by the thermal analysis, scanning electron microscopy （SEM） and the tensile test. Based on the analysis results, it was concluded that the melting peaks ranging from 110 to 200 ℃ and 200 to 240 ℃ were caused by the fusion of the fringed micelle crystals and chain-folded crystals respectively. AC advanced the fringed micelle crystal to develop, while AA and PHP promoted obviously the chain-folded crystal to grow. The addition of the foreign additives did not change the growth pattern ofPVC crystallites, the growth of the micelle crystal was favorable at 110 ℃, and the chain-folded crystal was developed at higher temperature. For PVC/ AA and PVC/PHP, when annealed at 110 ℃, a regular nest like network was formed, the crystallinity and the crystallite size were increased as well, and as a result, the tensile strength, Young＇s modulus and the elongation at break point were improved simultaneously and greatly.

Structures of LDHs Intercalated with Ammonia and the Thermal Stability for Poly(vinyl chloride)

MgAl-NH3 LDHs (layered double hydroxides), ZnAl-LDHs and ZnAl-NH3 LDHs with different molar ratio of Al/ammonia were synthesized by co-precipitation method. The synthetic LDHs samples were characterized by XRD, FT-IR, TGA-DTG and SEM techniques and tested by Congo red method. In addition, after PVC (Poly vinyl chloride) and DOP (Dioctylphthalate) were added to LDHs, the thermal stability for PVC was characterized by TGA-DTG. The results indicated that LDHs intercalated with ammonia improved thermal stability for PVC significantly, MgAl-NH3 LDHs (Mg2+:Al3+: NH3·H2O = 3:1:0.5) and ZnAl-NH3 LDHs (Zn2+:Al3+:NH3·H2O=2:1:1.5) showed the best thermal stability for PVC, interlayered space of LDHs became larger by intercalating ammonia.

Research on the Long Time Swelling Properties of Poly (vinyl alcohol)/Hydroxylapatite Composite Hydrogel

Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.The water loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests of PVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling properties with the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long time immersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HA composite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel in the calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and its equilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the network structure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content. Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium are obtained when the HA content is 3% and the number of freezing-thawing cycles is 7.

Preparation and Swelling Behavior of Physically Crosslinked Hydrogels Composed of Poly(vinyl alcohol) and Chitosan

The physically crosslinked poly（vinyl alcohol）/chitosan （CS） composite hydrogels were prepared by cyclic freezing/thawing techniques, and the microstructure and swelling behavior of the hydrogels in the simulated gastric （pH 1.0） and intestinal （pH 7.4） media were investigated. The experimental results of infrared spectra （IR）, scanning electron microscope （SEM） and differential scanning calorimetry （DSC） demonstrated that poly（vinyl alcohol） and chitosan had good miscibility in the composite hydrogels, and the addition of chitosan perturbed the formation of poly（vinyl alcohol） crystallites. The swelling kinetics results indicated that the composite hydrogels had good pH sensitive properties to the acidic environments, and with the increase of chitosan content in the blend, the maximum swelling degreed and the swelling rate both increased, but it led to more dissolution at pH 1.0. And the composite hydrogels also exhibited good reversible swelling behavior with pH value of the swelling medium altering between 1.0 and 7.4. In addition, the higher freezing/thawing cycle times resulted in the lower swelling rate. Therefore, the swelling behavior of the composite hydrogels could be adjusted by changing the chitosan contents and the freezing/thawing cycle times.