Polarization-Insensitive Silica on Silicon Arrayed Waveguide Grating Design

A new technology for fabrication of silica on silicon arrayed waveguide grating (AWG) based on deep etching and thermal oxidation is presented.Using this method,a silicon layer is remained at the side of waveguide.The stress distribution and effective refractive index of waveguide fabricated by this approach are calculated using finite element and finite difference beam propagation method,respectively.The results of these studies indicate that the stress of silica on silicon optical waveguide can be matched in parallel and vertical direction and AWG polarization dependent wavelength (PDλ) can be reduced effectively due to side-silicon layer.

RAPID SCREENING OF AN ARRAYED cDNA LIBRARY BY IMPROVED PCR-BASED METHOD

The present study reports an improved PCR-based technique that allows quick and effective screening of cDNA libraries. First, the cDNA library was arrayed as follow: about 3 X 10’ cDNA clones were multiplied as individual plaques on solid medium in 24-well culture dishes at 1 200 plaque forming units per well. The phage suspension of each well was transferred to an individual microcentrifuge tube in 72-tube box. Then, box pool, row pools and column pools were set up that respectively represent a 72-tube box, rows and columns within the box. To screen a specific target cDNA,primers specific for novel ESTs ob- tained in our laboratory were employed to conduct PCR in a hierarchy mode. PCR began with the box pools, resulting in the identification of some Positive box pools. Then PCR went down to the row and col- umn pools of the positive box. The intersection of the positive row (s) and column (s) revealed the candi- date positive tubes. The specificity of PCR products were meanwhile checked by restriction enzyme diges- tion. Finally, hybridization was carried out to get single specific cDNA clomes from the positive tubes. This PCR-based technique features high specificity, high efficiency and less-cost in large-scale cDNA library screening. Our initial implementation of the technique resulted in the isolation of three longer different cD- NA clones from a human fetal brain cDNA library. Thus this improved technique can serve as an alterna-tive to the time-consuming and laborious conventional hybridization-based method for screening cDNA li-brary.

A 32-channel 100 GHz wavelength division multiplexer by interleaving two silicon arrayed waveguide gratings

A 32-channel wavelength division multiplexer with 100 GHz spacing is designed and fabricated by interleaving two silicon arrayed waveguide gratings(AWGs).It has a parallel structure consisting of two silicon 16-channel AWGs with200 GHz spacing and a Mach-Zehnder interferometer(MZI)with 200 GHz free spectral range.The 16 channels of one silicon AWG are interleaved with those of the other AWG in spectrum,but with an identical spacing of 200 GHz.For the composed wavelength division multiplexer,the experiment results reveal 32 wavelength channels in C-band,a wavelength spacing of 100 GHz,and a channel crosstalk lower than-15 dB.

Analysis of One-Dimensional Compression under a Wide Range of Stress with Densely Arrayed BPM

In this paper,the densely arrayed bonded particle model is proposed for simulation of granular materials with discrete element method(DEM)considering particle crushing.This model can solve the problem of pore calculation after the grains are crushed,and reduce the producing time of specimen.In this work,several one-dimensional compressing simulations are carried out to investigate the effect of particle crushing on mechanical properties of granular materials under a wide range of stress.The results show that the crushing process of granular materials can be divided into four different stages according to er-logσy curves.At the end of the second stage,there exists a yield point,after which the physical and mechanical properties of specimens will change significantly.Under extremely high stress,particle crushing will wipe some initial information of specimens,and specimens with different initial gradings and void ratios present some similar characteristics.Particle crushing has great influence on grading,lateral pressure coefficient and compressibility of granular materials,and introduce extra irreversible volume deformation,which is necessary to be considered in modelling of granular materials in wide stress range.

Design and fabrication of multi-channel photodetector array monolithic with arrayed waveguide grating

We have provided optical simulations of the evanescently coupled waveguide photodiodes integrated with a 13- channels AWGs. The photodiode could exhibit high internal efficiency by appropriate choice of layers geometry and refrac- tive index. Aseamless joint structure has been designed and fabricated for integrating the output waveguides of AWGs with the evanescently coupled waveguide photodiode array. The highest simulation quantum efficiency could achieve 92% when the matching layer thickfiess of the PD is 120 nm and the insertion length is 2 μm. The fabricated PD with 320-nm-thick match.ing layer and 2-μm-length insertion matching layer present a responsivity of 0.87 A/W.

Design and Analysis of 4×4 Arrayed Waveguide Grating Multiplexer

The operation principle of an arrayed waveguide grating(AWG) multiplexer is introduced and the 4×4 AWG with following design parameters is discussed in detail, such as the choice of wavelength, the neighboring arrayed waveguide distance ΔL, the channel frequency interval Δf, and the free spectral range. The structure of 4×4 AWG is designed and the result of stimulated test is also given. Analysis shows that the 4×4 AWG is characterized by a wide dynamic range, low crosstalk, better spectrum properties, and a compact structure.

Improved Performance of a Wavelength-Tunable Arrayed Waveguide Grating in Silicon on Insulator

The improved performance of a wavelength-tunable arrayed waveguide grating (AWG) is demonstrated, including the crosstalk, insertion loss and the wavelength tuning efficiency. A reduced impact of the fabrication process on the AWG is achieved by the design of bi-level tapers. The wavelength tuning of the AWG is achieved according to the thermo-optic effect of silicon, and uniform heating of the silicon waveguide layer is achieved by optimizing the heater design. The fabricated AWG shows a minimum crosstalk of 16 dB, a maximum insertion loss of 3.91 dB and a wavelength tuning efficiency of 8.92 nm/W, exhibiting a ～8 dB improvement of crosstalk, ～2.1 dB improvement of insertion loss and ～5 nm/W improvement of wavelength tuning efficiency, compared to our previous reported results.

Novel wavelength-accurate InP-based arrayed waveguide grating

A 13-channel, InP-based arrayed waveguide grating （AWG） is designed and fabricated in which the on-chip loss of the central channel is about -5 dB and the crosstalk is less than -23 dB in the center of the spectrum response. However, the central wavelength and channel spacing are deviated from the design values. To improve their accuracy, an optimized design is adopted to compensate the process error. As a result, the central wavelength 1549.9 nm and channel spacing 1.59 nm are obtained in the experiment, while their design values are 1549.32 nm and 1.6 nm, respectively. The route capability and thermo-optic characteristic of the AWG are also discussed in detail.

Fluorinated polymer with high thermal stability for fabrication of 32-channel arrayed waveguide grating multiplexer on silicon

A cross-linkable fluorinated poly (ether ether ketone) (FPEEK) was synthesized for the fabrication of arrayed waveguide grating (AWG) multiplexer. The results of thermal gravimetric analysis (TGA) and near-infrared absorption spectrum show that the materials have high thermal stability and high optical transparency in the infrared communication region. The refractive index of FPEEK can be controlled easily by changing the fluorine content of the materials. The 32-channel AWG multiplexer is fabricated using the FPEEK and oxygen reactive ion etching technology. The AWG multiplexer exhibits that the insertion loss is from 12.8 to 17.8 dB and the channel crosstalk is less than-20 dB. The wavelength channel spacing and the center wavelength are 0.8nm and 1548nm, respectively.

Design and Fabrication of a 400 GHz InP-Based Arrayed Waveguide Grating with Flattened Spectral Response

A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.

Influence of Crosstalk on Signal Power Based on Arrayed-waveguide Grating as N × N Optical Router

The fact that the signal results in signal―crosstalk is confirmed forarrayed―waveguide grating as NXN optical router, and the relation between the crosstalk and powerpenalty is obtained. The method reveals the random distributions of optical path phase errors in twomultiplexers with channel numbers of 10 and 160. It is shown that the crosstalk must be less than―28 dB for a power penalty below 1 dB at a bit error rate of 1X10^(-9). It is found that when N =100, crosstalk power value is ? 20 dB with compensation power of 2―3 dB, so the compensation poweris not ignored.

Near Infrared Fluorescence Enhancement by Local Surface Plasmon Resonance from Arrayed Gold Nanoblocks

The near infrared (NIR) fluorescence enhancement by local surface plasmon resonanoce from arrayed gold (Au) nanoblocks was investigated by NIR fluorescent dyes, IR780, immobilized in hydrophobic DNA thin film on glass substrates, to clarify the gap mode effect on the fluorescence enhancement. In the substrate with Dimer type Au nanoblock arrangement, average total fluorescence intensity was larger by 10.0, 2.4, and 12.4 times for non-polarized, P- and S- polarization as compared with that on a glass substrate alone, respectively. These findings suggested that enhancement of excitation light intensity at nanogap in the Dimer type Au nanoblock arrangement affected the fluorescence intensity. Average total fluorescence intensity, on the other hand, was smaller by 0.63 times as compared with that on a glass substrate alone in the checkerboard type Au array. It is suggested that the fluorescence quenching was caused by the energy transfer from the excited state of IR780 to Au nanoblocks or by the increased deactivation of excited dye molecules induced by resonance with Au nanoblocks at the checkerboard arrangement. We have firstly achieved the NIR fluorescence enhancement by LSPR due to the gap mode.

Ultralow cross talk arrayed waveguide grating integrated with tunable microring filter array

The silicon-based arrayed waveguide grating(AWG)is widely used due to its compact footprint and its compatibility with the mature CMOS process.However,except for AWGs with ridged waveguides of a few micrometers of cross section,any small process error will cause a large phase deviation in other AWGs,resulting in an increasing cross talk.In this paper,an ultralow cross talk AWG via a tunable microring resonator(MRR)filter is demonstrated on the SOI platform.The measured insertion loss and minimum adjacent cross talk of the designed AWG are approximately 3.2 and-45.1 d B,respectively.Compared with conventional AWG,its cross talk is greatly reduced.

Anisotropy-free arrayed waveguide gratings on X-cut thin film lithium niobate platform of in-plane anisotropy

Arrayed waveguide grating is a versatile and scalable integrated light dispersion device,which has been widely adopted in various applications,including,optical communications and optical sensing.Recently,thin-film lithium niobate emerges as a promising photonic integration platform,due to its ability of shrinking largely the size of typical lithium niobate based optical devices.This would also enable multifunctional photonic integrated chips on a single lithium niobate substrate.However,due to the intrinsic anisotropy of the material,to build an arrayed waveguide grating on X-cut thin-film lithium niobate has never been successful.Here,a universal strategy to design anisotropyfree dispersive components on a uniaxial in-plane anisotropic photonic integration platform is introduced for the first time.This leads to the first implementation of arrayed waveguide gratings on X-cut thin-film lithium niobate with various configurations and high-performances.The best insertion loss of 2.4 dB and crosstalk of−24.1 dB is obtained for the fabricated arrayed waveguide grating devices.Applications of such arrayed waveguide gratings as a wavelength router and in a wavelength-division multiplexed optical transmission system are also demonstrated.

Breaking anisotropy limitations in thin-film lithium niobate arrayed waveguide gratings

A universal design strategy for dispersive elements in anisotropic platforms is proposed,enabling high-performance arrayed waveguide gratings in thin-film lithium niobate that are essential for future optical communications.

Polymer Arrayed Waveguide Grating with Box-Like Spectral Response

An efficient technique is used to flatten the spectral response of an arrayed waveguide grating （AWG） multiplexer. By subtracting an increment from the core width of odd arrayed waveguides and by adding the same increment to that of even arrayed waveguides,a box-like spectral response can be obtained. A 17 × 17 polymer AWG multiplexer with box- like spectral response has been made using FPE polymer materials. Measured result for the AWG shows that the box-like spectral response has a 3dB bandwidth of 0. 476nm, the crosstalk is about or less than - 21dB for every output channel,and the insertion loss is 13-15dB.

Toward optical coherence tomography on a chip: in vivo three-dimensional human retinal imaging using photonic integrated circuit-based arrayed waveguide gratings

In this work,we present a significant step toward in vivo ophthalmic optical coherence tomography and angiography on a photonic integrated chip.The diffraction gratings used in spectral-domain optical coherence tomography can be replaced by photonic integrated circuits comprising an arrayed waveguide grating.Two arrayed waveguide grating designs with 256 channels were tested,which enabled the first chip-based optical coherence tomography and angiography in vivo three-dimensional human retinal measurements.Design 1 supports a bandwidth of 22nm,with which a sensitivity of up to 91 dB(830μW) and an axial resolution of 10.7 pm was measured.Design 2 supports a bandwidth of 48 nm,with which a sensitivity of 90 dB(480μW) and an axial resolution of 6.5μm was measured.The silicon nitride-based integrated optical waveguides were fabricated with a fully CMOS-compatible process,which allows their monolithic co-integration on top of an optoelectronic silicon chip.As a benchmark for chip-based optical coherence tomography,tomograms generated by a commercially available clinical spectral-domain optical coherence tomography system were compared to those acquired with on-chip gratings.The similarities in the tomograms demonstrate the significant clinical potential for further integration of optical coherence tomography on a chip system.

Integrated scanning spectrometer with a tunable micro-ring resonator and an arrayed waveguide grating

Integrated spectrometers with both wide optical bandwidths and high spectral resolutions are required in applications such as spectral domain optical coherence tomography(SD-OCT).Here we propose a compact integrated scanning spectrometer by using a tunable micro-ring resonator(MRR)integrated with a single arrayed waveguide grating for operation in the 1265-1335-nm range.The spectral resolution of the spectrometer is determined by the quality factor of the MRR,and the optical bandwidth is defined by the free spectral range of the arrayed waveguide grating.The spectrometer is integrated with on-chip germanium photodetectors,which enable direct electrical readout.A 70-nm optical bandwidth and a 0.2-nm channel spacing enabled by scanning the MRR across one free spectral range are demonstrated,which offer a total of350 wavelength channels with 31-kHz wavelength scanning speed.The integrated spectrometer is applied to measure different spectra and the interference signals from an SD-OCT system,which shows its great potential for future applications in sensing and imaging systems.

Arrayed piezoresistive and inertial measurement unit sensor-integrated assistant training tennis racket for multipoint hand pressure monitoring and representative action recognition

Technology-assisted ball training systems have become a research hotspot due to their ability to provide quantitative data for guiding athletes to address their areas of improvement.However,traditional tennis training systems still have some limitations;for instance,they are subjective,expensive,heavy,and time-consuming.In this research,an assistant training tennis racket,which consists of arrayed flexible sensors and an inertial measurement unit,has been proposed to comprehensively analyze the representative actions’force and acceleration.Consisting of MXene as the sensitive material and melamine sponge as the substrate(named MMSS),the flexible sensor exhibited an excellent sensitivity of 5.35 kPa^(-1)(1.1-22.2 kPa)due to the formation of a 3D conductive network.Moreover,the sensor retained a high sensitivity of 0.6 k Pa-1in an ultrawide measurement range(22.2-266 kPa).In addition to recognizing the type of hitting action,an artificial intelligence algorithm was introduced to accurately differentiate the five typical motion behaviors with an accuracy rate of 98.2%.This study not only proposes a comprehensive assistant training tennis racket for improving the techniques of tennis enthusiasts but also a new information processing scheme for intelligent sensing and distinction of different movements,which can offer significant application potential in sports big data collection and the Internet of things.

Design and Fabrication of Polymer Arrayed Waveguide Grating

In this paper, based on the principle of Arrayed Waveguide Grating (AWG)theory, some important parameters are optimized for polymer AWG around the central wavelength of1.55μm with the wavelength spacing of 1.6 nm. Then, a 9 X 9 polymer AWG is designed and thefabricating process are described . The cladding material is poly-methyl-methacrylate-co-glyciclylmethacrylate (PMMA-GMA) and the core material is the mixture of PMMA-GMA and bis-phonel-A epoxy. Inorder to obtain a better shape of the waveguide after the Reactive Ion Etching (RIE) using oxygen,an aluminum mask is used on polymer instead of conventional photoresist as mask in the fabricationprocess. The measuring results indicate that the fabricated optical waveguide achieves single-modetransmission.