Earthquake simulation test of circular reinforced concrete bridge column under multidirectional seismic excitation

Structures behave multi-directionally when subjected to earthquake excitation. Thus, it is essential to evaluate the effect of multidirectional loading on the dynamic response and seismic performance of reinforced concrete bridge columns in order to develop more advanced and reliable design procedures. To investigate such effects, a 1/4 scaled circular reinforced concrete bridge column specimen was tested under two horizontal and one vertical components of a strong motion that has long duration with several strong pulses. Damage progress of reinforced concrete columns subjected to strong excitation was evaluated from the test. The test results demonstrate that the lateral force response in the principal directions become smaller than computed flexural capacity due to the bilateral flexural loading effects, and that the lateral response is not significantly affected by the fluctuation of the axial force because the horizontal response and axial force barely reached the maximum simultaneously due to difference of the predominant natural periods between the vertical and the horizontal directions. Accuracy of fiber analyses is discussed using the test results.

Residual drift spectra for RC bridge columns subjected to near-fault earthquakes

Permanent displacement of a bridge column can be directly measured during the inspection after near-fault earthquakes.However,the engineer needs to estimate the expected residual drift at the design stage to determine if the bridge seismic performance is satisfactory.The most direct method to estimate the residual displacement is nonlinear response history analysis,which is time consuming and cumbersome.Alternatively,an attractive but indirect method is generating estimated residual displacement spectra that depend on displacement ductility demand,column period,site conditions,and earthquake characteristics.Given the period and the expected displacement ductility demand for the column,the residual drift response spectra curves can be utilized to estimate the residual drift demand.Residual drift spectra that are applicable to RC bridge columns in different parts of the United States were developed based on nonlinear response history analyses using a comprehensive collection of recorded and synthetic near-fault ground motions and were linked to one-second spectral acceleration(S1)of the AASHTO maps.It was also found that the residual drift ratio is below one percent when S1 is less than 0.6 g.

Structural Performance of Light Weight Multicellular FRP Composite Bridge Deck Using Finite Element Analysis

Fiber reinforced polymer （FRP） composite materials having advantages such as higher strength to weight than conventional engineering materials, non-corrosiveness and modularization, which should help engineers to obtain more efficient and cost effective structural materials and systems. Currently, FRP composites are becoming more popular in civil engineering applications. The objectives of this research are to study performance and behavior of light weight multi-cellular FRP composite bridge decks （both module and system levels） under various loading conditions through finite element modeling, and to validate analytical response of FRP composite bridge decks with data from laboratory evaluations. The relative deflection, equivalent flexural rigidity, failure load （mode） and load distribution factors （LDF） based on FE results have been compared with experimental data and discussed in detail. The finite element results showing good correlations with experimental data are presented in this work.

Numerical Staged Construction Analysis of Precast Concrete Bridge

The paper discussed about the staged construction analysis of two-span precast-girder bridge considering time dependent effects, namely creep and aging of concrete. Results obtained showed that it is very important to consider construction stage in the analysis of bridge because of stress resultants which are important in design process and very different from those obtained without the consideration of construction stage. This fact is especially important for bridges, because construction period continues along time and loads may change during the construction period and after.

Strengthening an in-service reinforcement concrete bridge with prestressed CFRP bars

Carbon fiber reinforced polymer (CFRP) bars were prestressed for the structural strengthening of 8 T-shaped rein-forced concrete (RC) beams of a 21-year-old bridge in China. The ultimate bearing capacity of the existing bridge after retrofit was discussed on the basis of concrete structures theory. The flexural strengths of RC beams strengthened with CFRP bars were controlled by the failure of concrete in compression and a prestressing method was applied in the retrofit. The field construction processes of strengthening with CFRP bars-including grouting cracks, cutting groove, grouting epoxy and embedding CFRP bars, surface treating, banding with the U-type CFRP sheets, releasing external prestressed steel tendons-were introduced in detail. In order to evaluate the effectiveness of this strengthening method, field tests using vehicles as live load were applied before and after the retrofit. The test results of deflection and concrete strain of the T-shaped beams with and without strengthening show that the capacity of the repaired bridge, including the bending strength and stiffness, is enhanced. The measurements of crack width also indicate that this strengthening method can enhance the durability of bridges. Therefore, the proposed strengthening technology is feasible and effective.