Influence of Incomplete Soil Plugs on Bearing Capacities of Bucket Foundations in Clay

Due to the uneven seabed and heaving of soil during pumping,incomplete soil plugs may occur during the installation of bucket foundations,and the impacts on the bearing capacities of bucket foundations need to be evaluated.In this paper,the contact ratio(the ratio of the top diameter of the soil plug to the diameter of the bucket)and the soil plug ratio(the ratio of the soil heave height to the skirt height)are defined to describe the shape and size of the incomplete soil plug.Then,finite element models are established to investigate the bearing capacities of bucket foundations with incomplete soil plugs and the influences of the contact ratios,and the soil plug ratios on the bearing capacities are analyzed.The results show that the vertical bearing capacity of bucket foundations in homogeneous soil continuously improves with the increase of the contact ratio.However,in normally consolidated soil,the vertical bearing capacity barely changes when the contact ratio is smaller than 0.75,while the bearing capacity suddenly increases when the contact ratio increases to 1 due to the change of failure mode.The contact ratio hardly affects the horizontal bearing capacity of bucket foundations.Moreover,the moment bearing capacity improves with the increase of the contact ratio for small aspect ratios,but hardly varies with increasing contact ratio for aspect ratios larger than 0.5.Consequently,the reduction coefficient method is proposed based on this analysis to calculate the bearing capacities of bucket foundations considering the influence of incomplete soil plugs.The comparison results show that the proposed reduction coefficient method can be used to evaluate the influences of incomplete soil plug on the bearing capacities of bucket foundations.

Experimental Study on the Sinking and Leveling of A Large-Capacity Offshore Wind Turbine Five-Bucket Foundation in Sand

As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea conditions and support large capacities while maintaining economical and safe.To meet this goal of integrated transportation and one-step installation,a novel five-bucket jacket foundation(FBJF),with its suction installation and leveling methods in sand,has been proposed,analyzed and experimentally studied.First,seepage failure experiments of the FBJF at various depths were conducted,and a formula for calculating the critical suction of seepage failure suitable for the FBJF in sand was chosen and recommended for use with a range of values for the permeability coefficient ratio.Second,through leveling experiments of the FBJF at different depths,the maximum adjustable leveling angle during the sinking process was defined using seepage failure and the adjustable leveling angle of the foundation as control criteria.Various leveling control strategies were proposed and verified.Finally,an automatic sinking and leveling control system for the FBJF was developed and experimentally verified for feasibility.

Stability Study on the Bucket Foundation with Multi-Compartment During the Floating-up Process Considering Air Compressibility

In the process of developing offshore wind power towards deeper waters,the advantages of the bucket foundation in terms of integrated construction and economy are becoming increasingly evident.In contrast to conventional floating bodies,the air-floating bucket foundations can achieve self-floating with the help of the air in the compartment and adjust its buoyancy and stability by controlling the air volume in the compartment.The construction process of the bucket foundation involves the control of air in the compartment,thus making it more difficult to construct.Especially after the prefabrication of the bucket foundation,the stability of the bucket foundation at the floating-up stage is particularly critical.The stability of a multi-compartment bucket foundation during the floating-up process cannot be accurately evaluated as the existing theoretical method of air-floating structures does not adequately consider air compressibility.To ensure the safety of the floating-up process,a theoretical method based on the idea of intact stability has been developed to analyze the stability of the air-floating bucket foundations,which will allow accurate calculation of the righting arm for different tilt states and critical air leakage angle.At the same time,accuracy and feasibility of the proposed theoretical method are verified through indoor model tests and practical operation of the prototype structure during the floating-up process.In addition,measures to enhance the stability of the bucket foundation are proposed through sensitivity analysis of influencing factors.

Research on the Critical Buckling Pressure of Bucket Foundations with Inner Compartments for Offshore Wind Turbines

In the process of suction penetration of bucket foundations with inner compartments for offshore wind turbines,most researches focus on soil seepage failure and soil plugs,while the buckling of foundations is rarely investigated.Therefore,theoretical calculation methods for critical buckling pressures of the skirt and bulkheads of the bucket foundation are first presented according to the stability theory of a cylindrical shell and the small deflection theory of a thin plate,respectively.Furthermore,two types of models with and without considering the skirt-soil interaction are developed for the calculation of critical buckling pressure of the bucket foundation.Taking a practical project as an example,theoretical and numerical methods are used to obtain the critical buckling pressures of a bucket foundation.In this work,the theoretical method and the finite element model considering the skirt-soil interaction for calculating the critical buckling pressure of bucket foundations are firstly proposed.The results can help to optimize the design process of offshore wind turbine foundations and improve the safety of offshore wind power systems.

Towing characteristics of large-scale composite bucket foundation for offshore wind turbines

In order to study the towing dynamic properties of the large-scale composite bucket foundation the hydrodynamic software MOSES is used to simulate the dynamic motion of the foundation towed to the construction site.The MOSES model with the prototype size is established as the water draft of 5 and 6 m under the environmental conditions on site.The related factors such as towing force displacement towing accelerations in six degrees of freedom of the bucket foundation and air pressures inside the bucket are analyzed in detail.In addition the towing point and wave conditions are set as the critical factors to simulate the limit conditions of the stable dynamic characteristics.The results show that the large-scale composite bucket foundation with reasonable subdivisions inside the bucket has the satisfying floating stability.During the towing process the air pressures inside the bucket obviously change little and it is found that the towing point at the waterline is the most optimal choice.The characteristics of the foundation with the self-floating towing technique are competitive for saving lots of cost with few of the expensive types of equipment required during the towing transportation.

Bearing Capacity and Technical Advantages of Composite Bucket Foundation of Offshore Wind Turbines

Based on mechanical characteristics such as large vertical load, large horizontal load, large bending moment and complex geological conditions, a large scale composite bucket foundation （CBF） is put forward. Both the theoretical analysis and numerical simulation are employed to study the bearing capacity of CBF and the relationship between loads and ground deformation. Furthermore, monopile, high-rise pile cap, tripod and CBF designs are compared to analyze the bearing capacity and ground deformation, with a 3-MW wind generator as an example. The resuits indicate that CBF can effectively bear horizontal load and large bending moment resulting from upper structures and environmental load.

Design of Large-Scale Prestressing Bucket Foundation for Offshore Wind Turbines

The key in the force transmission between the tower and the foundation for offshore wind turbines is to transfer the large moment and horizontal loads. The finite element model of a large-scale prestressing bucket founda- tion for offshore wind turbines is set up and the structural characteristics of the arc transition structure of the founda- tion are analyzed for 40-60 channels(20-30 rows) arranged with prestressing steel strand under the same ultimate load and boundary conditions. The mechanical characteristics of the key parts of the foundation structures are illus- trated by the peak of the principal tensile stress, the peak of the principal compressive stress and the distribution areas where the principal tensile stress is larger than 2.00 MPa. It can be concluded that the maximum principal tensile stress of the arc transition decreases with the increasing number of channels, and the amplitude does not change signifi- cantly; the maximum principal compressive stress increases with the increasing number of channels and the amplitude changes significantly; however, for the distribution areas where the principal tensile stress is larger than 2.00 MPa, with different channel numbers, the phenomenon is not obvious. Furthermore, the principal tensile stress at the top of the foundation beams fluctuantly increases with the increasing number of channels and for the top cover of the bucket, the principal tensile stress decreases with the increasing number of channels.

Soil Reinforcement Experiment Inside Large-Scale Bucket Foundation in Muddy Soil

The large-scale bucket foundation with 30 m in diameter and 6 m in height was used as the foundation of wind turbine. The wide-shallow foundation is different from the traditional bucket foundation with high ratio of height to diameter. The cover-load-bearing mode of the new type foundation can resist more external loadings. To achieve the bearing mode, the muddy soil inside the bucket should be reinforced, which will improve the soil strength and make the soil and foundation into a whole part to resist the external loadings. The vacuum and electro-osmotic soil reinforc- ing methods were used in the experiments. The results showed that the bearing behavior of the muddy soil were effec- tively improved by the negative pressure and electro-osmotic effect, and the improved muddy soil with better strength could work together with the bucket foundation, meaning that the top-cover bearing mode of the new bucket founda- tion was achieved. During the soil reinforcing process, the foundation moved downward, i.e., the settlement of founda- tion was almost finished during the pre-loading process caused by the vacuum and electro-osmotic method.

Capacities and Failure Modes of Suction Bucket Foundation with Internal Bulkheads

Suction bucket foundations can be divided into four compartments by cruciform internal bulkheads,thereby yielding better capacity in certain conditions than those without internal bulkheads.As yet,no systematic study has been conducted regarding the effects of cruciform internal bulkheads on the capacities of suction bucket foundations.In this study,we established a large number of finite element models of suction bucket foundations with and without cruciform internal bulkheads and of solid embedded circular foundations.We found the uniaxial capacities and failure modes of suction bucket foundations with various depth ratios to remain basically unaffected by internal bulkheads in uniform clays.However,in inhomogeneous clay with high strength heterogeneity,we observed the uniaxial moment and horizontal capacities and corresponding failure modes of suction bucket foundations with a low depth ratio to be obviously affected by internal bulkheads.In this case,the uniaxial moment capacities,in particular,as well as the horizontal capacities of suction bucket foundations with cruciform internal bulkheads become obviously greater than those without internal bulkheads.Under combined loading,we found the failure envelopes of suction bucket foundations with and without cruciform internal bulkheads and of solid circular foundation to also be basically consistent in uniform clays.However,in inhomogeneous clay with high strength heterogeneity,cruciform internal bulkheads can obviously change the shapes of the failure envelopes of bucket foundations with a small depth ratio.We conclude that when the acting vertical load or foundation depth is relatively small,suction bucket foundations with cruciform internal bulkheads can be subjected to larger moment and horizontal loads in soft clays with high strength heterogeneity.

Study on Seepage Characteristics of Composite Bucket Foundation Under Eccentric Load

Under the effect of eccentric loads,when the suction pressure of the composite bucket foundation is leveled,the seepage failure is very easy to occur.The seepage failure occurrence causes the foundation to settle unevenly and impairs the bearing performance.This study uses ABAQUS finite element software to establish a composite bucket foundation model for finite element analysis.The model simulates the seepage of the foundation penetrating process under eccentric load to reveal the induced seepage characteristics of the bucket foundation.The most vulnerable position of seepage failure under the eccentric loading is elucidated.Critical suction formulas for different offset eccentric moment strategies are derived and compared with existing literature formulas.Then the derived formula is supplemented and corrected according to the pressure difference between adjacent cabins.Conclusions can be drawn:(1)Under eccentric loads,the critical suction decreases about 7%−10%.(2)The pressure difference between adjacent cabins impacts significantly on the seepage field,and the critical suction,at most,can be reduced by 17.56%.(3)the offset strategies have little effect on the seepage field.Efficient and appropriate strategies can be selected to meet the requirement of leveling in engineering project.

Integrated Towing Transportation Technique for Offshore Wind Turbine with Composite Bucket Foundation

Composite bucket foundation and one-step installation technology for offshore wind turbine are the integration of foundation construction,transportation and whole installation at sea.The cost of offshore wind turbine construction and installation has been largely reduced.Foundation stability is the key technology in the process of towing transportation.Field observation data can reflect the real state of the foundation.In this paper,the influence of water depth and towing speed on liquid level,the compartment pressure,and the pitch angles during towing of composite bucket foundation are studied.These data are analyzed based on the field measurements data from a 3.3 MW offshore wind power project in China.The results show that with varied water depths and towing speeds,the compartment pressure changes are small during the bucket foundation towing process.The offshore wind turbine composite bucket foundation is stable while being towed in the ocean.

Experimental Investigation of Wave Load and Run-up on the Composite Bucket Foundation Influenced by Regular Waves

In the design of wind turbine foundations for offshore wind farms, the wave load and run-up slamming on the supporting structure are the quantities that need to be considered. Because of a special arc transition, the interaction between the wave field and the composite bucket foundation(CBF) becomes complicated. In this study, the hydrodynamic characteristics, including wave pressure, load, upwelling, and run-up, around the arc transition of a CBF influenced by regular waves are investigated through physical tests at Shandong Provincial Key Laboratory of Ocean Engineering, Ocean University of China. The distributions of the wave pressures and upwelling ratios around the CBF are described, and the relationship between the wave load and the wave parameters is discussed. New formulae based on the velocity stagnation head theory with linear wave theory and the second-order Stokes wave theory for wave kinematics are proposed to estimate the wave run-up. Moreover, the multiple regression method with nonlinear technology is employed to deduce an empirical formula for predicting run-up heights. Results show that the non-dimensional wave load increases with the increase in the values of the wave scattering parameter and relative wave height. The wave upwelling height is high in front of the CBF and has the lowest value at an angle of 135? with the incoming wave direction. The performance of the new formulae proposed in this study is compared using statistical indices to demonstrate that a good fit is obtained by the multiple regression method and the analytical model based on the velocity stagnation head theory is underdeveloped.

Estimation of Heights of Soil Plug Inside Bucket Foundations During Suction Penetration by Deformable Discrete Element Modeling

The soil plug phenomenon involving the rising of the surface soil inside the bucket chamber under the suction pressure and seepage forces was simulated and calculated by deformable discrete element method (DDEM) models. The seepage forces, the effective gravity of soil, the friction on the chamber wall and the suction inside the chamber are considered as the main external forces of DDEM specimen. Three typical types of soil (silty clay, silt and sand) in the Bohai Sea are set as the main environmental conditions in the formation process of soil plug. It is found that the heights of soil plug simulated by DDEM models are 161.85 mm in silty clay, 125.22 mm in silt and 167.56 mm in sand, which are close to model test results and higher than those estimated by discrete element method (DEM). DDEM is an effective method to estimate and predict the heights of soil plug before suction penetration of bucket foundations on site.

Seismic Response of Offshore Wind Structure Supported by Bucket Foundation

An integrated finite element model(FEM)of offshore wind tower-foundation-soil is established by ABAQUS, where a large-scale composite bucket foundation with seven compartments inside is applied to supporting the upper wind tower. The dynamic response of the structure-foundation system is studied under three seismic waves with the same peak ground acceleration of 0.035 g. It can be seen that the dynamic response increases at the beginning with the structure height, then it decreases because the structural damping increases due to the mass effect of the upper wind turbine generator system. It is shown that the anti-liquefaction capacity of the soil inside and underneath the foundation is improved owing to the high overburden pressure of the upper structure and the constraint effect of the bucket skirt and subdivisions. Moreover, the liquefaction resistance of the soil inside the middle compartment is improved to a higher degree than that inside the side compartments.

Calculation of Hydro-Dynamic Stability of the Soil Inside Bucket in the Process of Bucket Foundation Penetration

The offshore platform with bucket foundations is a;new type of offshore platform that distinguishes from traditional template platforms by replacing driven piles with bucket foundations. The suction penentration of bucket foundation is a complicated hydro-dynamic process. The key of this process is the seepage field caused by the difference of pressure applied on purpose inside and outside the bucket. The appearance and developement of seepage field has a decisive influence on the suction penetration process. In this study, the finite element analysis method is applied to the dynamic simulation of the seepage field of suction penetration of bucket foundation. A criterion is suggested to distinguish the hydro-dynamic stability of the soil inside the bucket according to the critical hydraulic gradient method. The reliability of the model and its applicability to engineering practice have been proved through comparison between the results of model test and finite element calculation.

Influential Factors of Bucket Foundation for Offshore Wind Turbine

In this paper, the influential design thctors of wide-shallow composite bucket foundation for 3 MW off- shore wind turbine are systematically studied by numerical simulation. The results show that the bucket diameter is larger than 27 m in generak and the range of 7--12 m is appropriate for cylinder height. In particular the bucket foun- dation with diameter of 30 m and cylinder height of 10 m is suitable for most soils. Under ultimate loads, the bucket diameter and elasticity modulus of soil have major effects on the deibrmability of bucket foundation, while the influ- ence of friction coefficient between the bucket and soil is relatively slight.

Experimental Study on Influencing Factors of Motion Responses for Air-Floating Tetrapod Bucket Foundation

Air floating transport is one of the key construction technologies of bucket foundation.The influences of draft,water depth and bucket spacing on the motion response characteristics of tetrapod bucket foundation(TBF)during air-floating transportation were studied by models tests.The results showed that with the increase of draft,the natural periods of heave motion increased,while the maximum amplitudes of oscillating motion decreased.The maximum amplitudes of heave motion decreased while pitch motion increased with the increasing of water depth;further,the period range of oscillating amplitude close to the maximum amplitude was expanded due to shallow water effect.With increasing bucket spacing,the maximum amplitudes of heave motion first increase and then decreased,whereas the maximum amplitudes of pitch motion decreased.Therefore,the favorable air-floating transportation performance can be achieved by choosing a larger bucket spacing under the condition of meeting the design requirements and reducing the draft under shallower water.

Virtual Reality and Visual Simulation Technology in Platform Construction with Four Bucket Foundations Based on Secondary Development of Vega

The platform with bucket foundations can penetrate and migrate by underpressure/positive pressure technique caused by pumping water out/in the bucket. However, the construction process of bucket foundations cannot be clearly observed and effectively controlled due to the special nature of sea environment. By using an advanced simulation development tool of Multigen Creator, the visual construction simulation program for the platform with bucket foundations was developed to set up the virtual reality system with interaction control and observation in every view angle based on the secondary development technology of Vega platform. The application results show that the method is feasible and effective by simulating the whole construction process for the platform with four bucket foundations.

Test on Muddy Soil Reinforcement by Negative Pressure and Electro-Osmosis Inside Cover-Bearing-Type Bucket Foundation for Offshore Wind Turbines

Cover-bearing-type bucket foundation for offshore wind turbines has been paid more and more attention due to its low cost and great bearing capacity. In order to ensure the cover-bearing mode, the muddy soil inside the bucket foundation should be reinforced by some soil consolidation methods, such as negative pressure and electro-osmosis. Firstly, tests were conducted to obtain the reasonable current density. Meanwhile, to improve the electro-osmotic speed and effectiveness, other factors such as intermittent power and layout of electrode, were also studied in the tests. Then, the soil reinforcing tests by negative pressure combined with electro-osmosis were performed for the muddy soil consolidation inside the bucket foundation. The results showed that soil reinforcement by negative pressure was quicker and more obvious during the early phase, and electro-osmotic method can affect more range of soil by rational arrangement of electrodes. Compared with negative pressure, the electro-osmotic method was a continuous and relatively slow process of reinforcement, which was complementary to the negative pressure method. The voltage value of electro-osmosis had little effect on the muddy soil reinforcement inside the bucket foundation, and 1.5 A was chosen as the most reasonable current value for scale model testing in the electro-osmotic method.

Penetration Resistance of Composite Bucket Foundation with Eccentric Load for Offshore Wind Turbines

The penetration of the composite bucket foundation(CBF)is crucial in its construction process.In actual projects,the foundation is inevitably subjected to eccentric load caused by towers and turbines,as well as wind,wave,and flow,during the one-step installation.Moreover,the eccentric load is bound to affect the penetration method and penetration resistance of the foundation.To examine the above-mentioned issues,the penetration resistance of CBF with eccentric load was calculated and analyzed based on model tests,and the seepage field of the CBF under eccentric load was analyzed using ABAQUS.The influence of different magnitudes of eccentric load and various offset strategies on penetration resistance was analyzed,and the theoretical and measured values were compared.The result indicated that the negative pressure of the offset room was found to be smaller than that of other rooms when the CBF penetrated the soil under eccentric load.The penetration resistance of CBF under eccentric load was larger than that without eccentricity,and the larger the eccentric load is,the greater the penetration resistance.The influence of different eccentric load offset strategies on penetration resistance was found to be negligible.The calculated penetration resistance under eccentric load was in good agreement with the measured value.