Leaf Area Calculation Model of E.urophylla and E.grandis×E.urophylla

[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.

Calculation model of edge carbon atoms in graphite particles for anode of lithium-ion batteries

Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.

Calculation Model of Equivalent Strength for Induced Crack Based on Double-K Fracture Theory and Its Optimizing Setting in RCC Arch Dam

By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.

Near ground air temperature calculation model based on heat transfer of vertical turbulent and horizontal air flow

In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.

Calculation model of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag

Two calculation models of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag was presented whether 3CaO·Cr_2O_3·3SiO_2 was existence or not.Equilibrium mass action concentration of each element structure was gained.And the models results were compared with experimental activity.The final results illustrated the model without 3CaO·Cr_2O_33SiO_2 was suit for reality.The model could response the element structure of slag as well.

Theoretical Calculation Model of Single Rip Tearing Strength for the Nonwoven Composites

The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistances of both the nonwoven composites and the woven fabric, the single rip tearing failure mechanism of the composites were analyzed. Then theoretical calculation model for the single rip tearing strength was established, which indicates that the breaking strength of warp and weft yams in the nonwoven composites, the density of warp and weft yarns and drawing out resistances are the main influencing factors. In the end, experimental verification was made, which shows that theoretical values conform to the measured values well.

Study on Calculation Model of High Speed Machine Silicon Steel Sheet Electromagnetic Characteristics Considering Magnetic, Stress and Temperature Condition

High-speed motor has the characteristics of high frequency, high temperature, and more stress, resulting in the field distribution inside the motor being complicated. To better study the electromagnetic characteristics of silicon steel sheet for high-speed motor. In this article, a study on the calculation model of silicon sheet electromagnetic characteristics considers the effects of electromagnetic, stress, and temperature factors. The study is divided into two parts, one is to propose the calculation model of silicon steel sheet’s permeability;the other is to improve the calculation model of silicon steel sheet’s loss. Then, the magnetic field, stress field, and temperature field of a surface mount high speed permanent magnet motor(SMHSPMSM) are analyzed by finite element method(FEM), and the results under the consideration of magnetic, stress, and temperature factors are brought into the calculation model for calculation. Finally, the accuracy of the calculation model for electromagnetic characteristics of silicon steel sheet is verified by comparing the calculated results with the finite element results.

The Calculation Model for Operation Cost of Coal Resources Development Based on ANN

On the basis of analysis and selection of factors influencing operation cost of coal resources development, fuzzy set method and artificial neural network (ANN) were adopted to set up the classification analysis model of coal resources. The collected samples were classified by using this model. Meanwhile, the pattern recognition model for classifying of the coal resources was built according to the factors influencing operation cost. Based on the results achieved above, in the light of the theory of information diffusion, the calculation model for operation cost of coal resources development has been presented and applied in practice, showing that these models are reasonable.

Calculation Models of Interlamellar Spacing of Pearlite in High-Speed 82B Rod

With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.

Improvements on Calculation Model of Theoretical Combustion Temperature in a Blast Furnace

On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.

Calculation model of AC loss for CICC(cable-in-conduit conductor) based on strain

The CICC (cable-in-conduit conductor) in ITER (International Thermal-nuclear Experimental Reactor) will run in high-current, fast transient magnet field and complex environment. In response to the impact of magnet fields above 10 T, the Nb3Sn conductor has been introduced. However, the AC (alternating current) loss mechanism of Nb3Sn conductor on strain has not been explored. So, it is necessary to study the AC loss calculation method with transient electromagnetic field and wide range of strain, the coupling current in complex field and current signal of field is simplified to the spectrum effects of coil excitation, and calculation technology of AC loss, which contains the frequency, magnet field, coil characteristics and other parameters, is constructed to meet the discrete Fourier transform (DFT). By comparative analysis of simulation, it is found that the AC loss calculation of the conductor with spectrum algorithm is closer to the actual project value than the traditional algorithm. For the rapid excitation, in particular plasma discharge and burst, spectrum algorithm and the traditional algorithm are consistent. For the relative error calculation of hysteresis loss and coupling loss, it is found that the coupling loss is cumulative linearly, where the hysteresis loss is not so. As a function of the amplitude, frequency and phase angle, the relative error is less than 40%. The results showed that the method of Fourier restructuring is satisfactory.

Experimental study on calculation model of labyrinth emitter discharge under subsurface drip irrigation

For different texture of soils,the grain composition is different with significant changes.Since the emitter of subsurface drip irrigation(SDI)is buried in the soil,emitter discharge is influenced by soil properties.An experiment was conducted to investigate the relationship between the soil properties with emitter working pressure and emitter discharge of SDI.Selecting three different grain composition soils,and emitter working pressure,as well as soil clay content,soil bulk density and initial soil moisture content respectively as influence factors of emitter discharge of SDI,the experimental scheme was gained by uniform design.A calculation model for determination of the SDI emitter discharge was established by regression analysis with the first two kinds of soil test data,and its reliability was verified by the third kind of soil test data.The model is simple with high accuracy,easy to use,and lays the foundation to study hydraulic elements of SDI field network,especially taking the soil clay content as an influencing factor has widened the scope of application of the model.The achievement is of great significance for design and management of SDI.

Calculation model for water influx and controlled reserves for CBM wells with high water yield

Compared with conventional gas reservoir,percolation mechanism of coalbed methane(CBM)is completely different,it is remarkably affected by adsorption/desorption performance,pressure variation and coalbed characteristics.Then it is difficult to calculate the controlled reserves of CBM wells.Moreover,the connection of edge-bottom water or interbedded water by fractures or faults may largely increase the water yield and drainage period,leading to obvious water invasion in some CBM wells.There are few literature about the predicted production for CBM wells with high water yield.Focusing on the unconventional CBM reservoir,methods of pseudo geological reserves and production index curves are adopted to establish the calculation model of water influx and controlled reserves.It further confirms that the calculation model is successfully applicated on the CBM wells at the middle part of Qinshui Basin in China.

Activity Calculation Model for Ternary Slag System of Al_2O_3-BaO-B_2O_3

According to the ion and molecule coexistence theory, the activity model of Al2O3- BaO-B2O3 ternary slag system was established, and the influences of BaO/Al2O3 molar ratio, B2O3 mole fraction and temperature on the activity of the slag system were investigated. Finally, the equal activity curves were drawn with the model results. The results show that with the increase of BaO/Al2O3 ratio, the activity of Al2O3 is significantly reduced, the activi- ty of BaO3-Al2O3 is increased obviously, and the activity of 2Al2O3· B2O3 is also decreased. With the increase of B2O3 mole fraction, the activity of BaO · Al2O3 decreased significantly, while the activities of BaO·B2O3 and 2Al2O3·B2O3 increased. In addition, the influence of temperature on the activities of different components is com paratively smaller than the influence of BaO/Al2O3 ratio and B2O3 mole fraction.

CHARACTERISTIC DISTRIBUTION OF SLOPE SCATTERED RADIATION WITH ITS CALCULATION MODEL

Detailed analysis is made of anisotropy of slope scattered radiation(SSR)in terms of the data obtained by a pyranometer mounted on a theodolite,indicating the change of SSR as a function of orientation and slope. And also reviewed are the models for SSR calculation developed by earlier researchers through the tests with the data.On this basis a new model for SSR flux density is proposed which is of higher applicability and has advantage over the analogues abroad both in physical implication and accuracy of the calculations.

THEORETICAL CALCULATION MODEL OF SHORTWAVE RADIATION FOR THE EARTH-ATMOSPHERE SYSTEM AND ITS TESTING RESULTS

On the basis of radiation transfer theory,adopting improved two-stream algorithm incorporated with addingalgorithm,we build up a theoretical calculation model of shortwave radiation for the earth-atmosphere system whichcan be applied with satellite data.The model can calculate direct solar radiation,scattering solar radiation,heating rateand other physical quantities of radiation field at every layer of the atmosphere and on the earth’s surface,if the under-ground reflectance or the planetary albedo obtained from satellite can be known.The model can be used in clear orcloudy atmosphere,and its calculating speed is fairly fast.We think that the model can be incorporated into large-scaleand mesoscale climatic models for the consideration of radiation calculation,and also it is useful for the utilization of so-lar energy.

Wetting front migration model of ion-adsorption rare earth during the multi-hole unsaturated liquid injection

In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still unclear.Besides,wetting front migration distance and leaching time are usually required to optimize the leaching process.In this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head height.At the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were identical.At the postintersection stage,the intersection accelerated the wetting front migration.By using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the intersection.Finally,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was established.Error analysis results showed that the proposed model can accurately simulate the infiltration process under experimental conditions.The research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.

Calculation of the Model of Coesite Inclusions and Analysis of Their Retrometamorphic Paths

The process and path of retrometamorphism of coesite have great significance to our understanding of the P-T tracks of the exhumation of ultrahigh-pressure metamorphic rocks. Most of the coesites in the eclogite from Shima, Anhui Province, the Dabie Mountains, China, are found degraded to quartz partly or wholly, with ruptures occurring in the shells, outside which include the coesite and quartz. According to the microscopic observation, the sample of coesite inclusion is composed of garnet, quartz and coesite, based on which we have built a three-shelled composite sphere model to compute the transition of coesite. Based on the crystal growth formulas and pressure conditions of the ruptures in the garnet, we have calculated the radius of the quartz sphere, which depends on temperature, and eventually drawn the different retrometamorphic paths for different retrometamorphism rates.

MM CALCULATIONS OF THE METAL-PROTEIN MODEL COMPLEXES Ⅰ.MOLECULAR FORCE FIELD FOR COBALT COMPEXES

Cobalt-protein complexes play an important role in biochemical processes.The structure of the model molecule,Co(H_2O)_3SO_4(phen) has been studied by molecular mechanics.The molecular force field (MM2) parameters have been developed for the particular class of the complexes.

THE NEW MODEL FOR CALCULATION OF STANDARD ENTROPIES OF SOLID COMPOUNDS Ⅲ CALCULATION FOR STANDARD ENTROPIES OF SOLID BINARY OXIDES

This paper establishes a new model for calculation of the standard entropies of solid binary oxides as follows: S_(29)=27.07×Φ_1+1.120×Φ_2+n_1×k×Φ, -22.19 e.u (R=0.9960) We have invesigated 103 binary oxides. and found good agreemenl between estimated and experimental entropies.