Fracture propagation and evolution law of indirect fracturing in the roof of broken soft coal seams

Indirect fracturing in the roof of broken soft coal seams has been demonstrated to be a feasible technology.In this work,the No.5 coal seam in the Hancheng block was taken as the research object.Based on the findings of true triaxial hydraulic fracturing experiments and field pilot under this technology and the cohesive element method,a 3D numerical model of indirect fracturing in the roof of broken soft coal seams was established,the fracture morphology propagation and evolution law under different conditions was investigated,and analysis of main controlling factors of fracture parameters was conducted with the combination weight method,which was based on grey incidence,analytic hierarchy process and entropy weight method.The results show that“士”-shaped fractures,T-shaped fractures,cross fractures,H-shaped fractures,and“干”-shaped fractures dominated by horizontal fractures were formed.Different parameter combinations can form different fracture morphologies.When the coal seam permeability is lower and the minimum horizontal principal stress difference between layers and fracturing fluid injection rate are both larger,it tends to form“士”-shaped fractures.When the coal seam permeability and minimum horizontal principal stress between layers and perforation position are moderate,cross fractures are easily generated.Different fracture parameters have different main controlling factors.Engineering factors of perforation location,fracturing fluid injection rate and viscosity are the dominant factors of hydraulic fracture shape parameters.This study can provide a reference for the design of indirect fracturing in the roof of broken soft coal seams.

Overburden fracture evolution laws and water-controlling technologies in mining very thick coal seam under water-rich roof

Considering the danger of water inrush in mining very thick coal seam under water-rich roof in Majialiang Coal Mine,the universal discrete element(UDEC)software was used to simulate the overburden fracture evolution laws when mining 4#coal seam.Besides,this study researched on the influence of face advancing length,speed and mining height on the height of the water flowing fractured zones(HWFFZ),and analyzed the correlation of face advancing length and change rules of aquifer water levels and goaf water inflow.Based on those mentioned above,this research proposed the following water-controlling technologies:draining the roof water before mining,draining goaf water,reasonable advancing speed and mining thickness.These water-controlling technologies were successfully used in the feld,thus ensured safely mining the very thick coal seam under water-rich roof.

Study on the Fissure Rate in the Roof Strata of Excavated Coal Seams

In the past decades,the intense excavation of coal resources in China has induced a series of severe waterrelated disasters or problems,such as water burst accidents,severe groundwater depletion and contamination.All of these problems were caused by the structural changes of roof rocks or bed rocks induced by coal excavation.The structure of collapsed roof rocks is generally classified into three zones：falling zone.

Control mechanism of a cable truss system for stability of roadways within thick coal seams

Cable truss systems have been widely applied in roadways with complicated conditions, such as the large cross-sections of deep wells, and high tectonic stress. However, they are rarely applied to roadways with extremely thick coal seams because the control mechanism of the system for the deformation of the roof and the separation between coal rock segments is not completely understood. By using the relationship between the support system and the roof strata, a mechanical model was established to calculate the deformation of the roof in a thick coal seam with bedding separation under different support conditions: with an anchor truss support and without support. On this basis, the research was used to deduce a method for computing the minimum pre-tightening forces in the anchor truss, the maximum amounts of subsidence and separation with, and without, anchor truss support under the roof, and the maximum subsidence and the decreasing amounts of the separation before and after adopting the anchor truss. Additionally, mechanical relationships between the minimum pre-tightening force and the anchoring force in the anchor were analyzed. By taking a typical roadway with thick coal roof as an example, the theoretical results mentioned above were applied in the analysis and testing of a roof supporting project in a roadway field to verify the accuracy of the theory: favorable experimental results were achieved. In addition, the relationships among other parameters were analyzed, including the minimum pre-tightening forces applied by the anchor truss, the angle of inclination of the anchor cable, and the array pitch. Meanwhile, the changing characteristics of the amounts of roof separation and subsidence with key parameters of the support system(such as array pitch, pre-tightening force, and inclination angle) were also analyzed. The research results revealed the acting mechanism of the anchor truss in control of roadway stability with a thick coal seam, providing a theoretical basis of its application in coal mining.

Controlling Effects of Surrounding Rock to Coal Seam Gas Occurrence

Surrounding rock of coal seam was one of the important factors to gas occurrence. The coal seam gas occurrence was studied by the index of roof strata thickness or sand content rate;we found that there were certain shortcomings. In order to reasonably evaluate the influence of coal seam surrounding rock on gas occurrence in Panji mining area, we quantitatively evaluated the effect of coal seam surrounding rock on gas occurrence by influence coefficient of roof strata thickness, and built six mathematical models of the variational gas content in the mining area which is divided into six gas geological units. The results shows that the coal seam gas content is mainly influenced by 20 mroof strata in each gas geological unit, the gas content presents the tendency of increase, and with the influence coefficient of strata thickness increases, they exist a significant linear relationship.

极近距离煤层开采无煤柱自成巷控制方法研究

极近距离煤层传统长壁开采,受上层遗留煤柱和采空区垮落等因素的影响,下煤层开采过程中应力环境复杂、矿压显现剧烈,易诱发巷道围岩大变形。为解决上述问题,提出了极近距离条件下巷道定向切顶–约束高强支护无煤柱自成巷控制方法。通过顶板定向预裂切顶,主动改变顶板悬臂结构,切断采空区向巷道顶板的应力传递。充分利用矿山压力和岩体碎胀特性,取消煤柱留设,结合高强支护加强巷道顶板整体性,共同实现切顶自成巷。建立了极近距离煤层开采覆岩结构模型,计算了下煤层切顶自成巷巷旁支护阻力。以典型极近距离煤层为工程背景,开展了不同开采方法的数值试验对比研究,结果表明,提出的自成巷控制方法使巷道围岩应力降低59.8%,巷道顶板变形减少70.8%,并明确了极近距离煤层开采无煤柱自成巷控制机理。在此基础上,开展了典型极近距离煤层工程设计及现场应用研究,结果表明该方法有效降低了矿压显现程度,保证了自成巷的安全稳定控制。

大采高综采工作面切顶留巷矸石帮变形控制技术研究

为解决厚煤层大采高综采工作面切顶留巷矸石帮围岩控制难题,首先利用理论分析建立了不同挡矸支护条件下矸石帮位移变化的力学公式,以此为基础提出矸石帮变形控制双策略,减弱矸石帮变形压力和增强矸石帮的抗变形能力;其次利用现场实验设计两种类别共4组挡矸支护方案,探讨不同支护方案的矸石帮控制效果,验证理论研究成果。结果表明:①增强矸石帮侧顶板支护强度,能减弱矸石帮变形压力;②增架卡兰个数、增加卡兰预紧力、增加卡兰个数、增强U型钢之间的摩擦力等能增加U型钢滑移初始滑移应力,增强矸石帮的抗变形能力;③挡矸支护控制效果为:2副卡兰+单体支柱<2副卡兰+单元支架<2副卡兰+单元支架+呛柱<3副卡兰+单元支架。该研究可为同类条件下切顶留巷矸石帮变形控制提供参考。

托顶煤巷道易片冒顶板变形机理与超前导管预注浆控制技术研究

目的 为探究厚煤层易片冒区域托顶煤巷道顶板变形破坏机理,并对易片冒区托顶煤巷道顶板进行有效控制,方法 以常村煤矿2701工作面皮带运输巷为例,通过等截面梁理论分析托顶煤巷道顶板破断成因,研究托顶煤巷道顶板的稳定性与巷道宽度和顶煤强度的关系。通过极限平衡准则得到巷帮位移的计算公式,证明托顶煤巷道具有帮顶协同变形机制。建立托顶煤巷道数值模型,研究巷道埋深、侧压系数、顶煤厚度和顶煤强度与托顶煤巷道围岩稳定性的关系。结果 结果表明:巷道埋深越大,其对托顶煤巷道两帮稳定性的影响越大;侧压系数的增加对巷道两帮和底鼓量的影响更大,对顶板影响较小;顶板下沉量与顶煤厚度呈正相关,底鼓量则与顶煤厚度呈负相关;顶煤强度的增加使巷道顶板下沉量与两帮移近量均近似呈线性减小趋势,底鼓量基本保持不变。结论 通过幂律型流体柱形渗透注浆扩散理论得到超前导管注浆半径,由此提出托顶煤巷道超前导管预注浆帮顶联合控制技术,成功控制易片冒托顶煤巷道顶板冒落问题,可为类似地质条件的托顶煤巷道顶板控制提供借鉴。

基于瞬变电磁法的煤层风氧化带探查

煤层风氧化带的发育对煤矿的生产组织和安全回采影响巨大,针对准格尔煤田东部隆起带煤层风氧化带圈定的技术难题,研究了瞬变电磁法探查煤层风氧化带的可行性。首先对研究区正常地层与煤层风氧化区的电阻率测井曲线进行了分析,总结了正常区与煤层风氧化区的电性差异,并以电阻率测井曲线构建了煤层风氧化区地电模型;然后采用MAXWELL软件对理论模型的瞬变电磁响应进行了数值模拟,发现在煤层风氧化区瞬变电磁反演电阻率断面表现为浅部低阻层变厚、低阻异常幅值减小的异常特征,可以以此来圈定煤层风氧化区的分布范围;最后在数值模拟的基础上,在串草圪旦煤矿开展了现场试验,结合钻探情况对试验数据从瞬变电磁反演电阻率断面和平面2个角度进行了分析,结果表明瞬变电磁法探测划分风氧化带是可行的。

薄煤层灰岩顶板巷道围岩稳定性控制

为合理控制薄煤层灰岩顶板巷道稳定性,避免过度支护引起巷道顶板失稳。以鲁西某矿薄煤层灰岩顶板巷道为研究对象,运用数值模拟、理论计算等研究方法,研究了不同类型灰岩顶板采场应力分布特征、围岩矿压显现规律及其塑性破坏形态特征,灰岩临界安全厚度影响性分析。研究结果发现:实体巷道的应力环境较好,应力集中程度相对较低,而沿空巷受2次采动影响范围更大、应力集中程度更高。煤矿巷道围岩在不同应力环境下需要不同程度的支护,主要集中在加强巷道两帮的支护和在特定情况下加强超前影响范围内的支护。

特厚煤层底板断层破坏与顶板垮断联动效应的CFDEM模拟研究

特厚煤层采场空间大、覆岩扰动范围广,顶板垮断产生的强扰动加卸荷载易导致底板断层破坏加剧。通过数值模拟研究特厚煤层底板断层突水与顶板垮断联动效应机理规律是开展水害防治的基础,关键在于掌握加卸载下岩体渐进破坏与裂隙流耦合特征。构建加卸载下拉、剪损伤演化方程,结合有效偏/球应力为基本变量的屈服准则与塑性势函数,得到完整岩块的塑性损伤本构;建立拉/剪、混合型加卸载过程中塑性位移与强度劣化关系,以平方拉剪应力与B-K准则为初始、完全断裂准则,形成非贯通裂隙断裂本构;提出岩块分离、压缩、剪切判据,结合实验数据建立离散块体间挤压、剪切摩擦本构与剪胀方程。基于质量/动量守恒、状态方程,并结合流体体积与浸没边界方法,形成裂隙岩体气−水二相流模拟理论。由此形成CFDEM数值计算程序,并将加卸载下塑性损伤、断裂、挤压/摩擦、流体属性分别赋予实体单元(岩块)、黏聚力单元(非贯通裂隙)、接触对(贯通裂隙)、欧拉单元(水和气)。根据宁武煤田北部矿区工程地质条件,建立特厚煤层底板断层突水与顶板垮断联动效应数值计算模型。结果表明:①CFDEM耦合程序及相应的理论模型可数值实现特厚煤层覆岩及底板断层从(准)连续体到离散体转化,以及地下水在裂隙中运移;②模拟条件下特厚煤层含断层底板的采动裂隙包络线呈w形,最深处超过55 m位于断层及其上盘,最浅处23 m位于断层下盘,而无构造底板处的破坏深度为24~36 m,已导通奥灰含水层;③特厚煤层底板普遍出现二次破坏现象。表现为无构造底板在超前工作面处破坏深度为24.0~29.3 m,但在采空区内普遍增加至31.5~36.0 m;断层及其上盘在超前工作面处裂隙总开度为0.34~0.86 m,但在采空区内迅速增加至3.6 m,形成突水优势通道。④底板断层突水与顶板垮断联动效应的根源在于覆岩高位关键岩层垮断失稳、砌体梁下沉与二次断裂,并导致底板二次破坏,突水风险加剧。

倾斜煤层厚硬顶板切顶留巷关键参数优化研究

为解决回采巷道倾斜厚硬顶板应力集中问题,降低顶板覆岩突然垮落的冲击扰动风险及提高倾斜厚硬顶板切顶留巷围岩控制效果,以长城六矿1301N运输巷切顶留巷为工程背景,综合采用理论分析、数值模拟及现场监测的研究方法开展倾斜煤层厚硬顶板切顶留巷关键参数优化研究。首先,基于岩石碎胀系数、砌体梁理论及现场地质资料,推导计算了1301N运输巷切顶高度和切顶角度的理论最小值。其次,为进一步验证并优化理论推导结果,利用PFC^(2D)数值软件建立了1301N工作面切顶留巷模型,采用控制变量法分析了不同切顶高度和切顶角度下留巷顶板应力、位移及组构张量响应特征。分析结果表明:切顶高度与卸压效果之间存在底数大于1的对数增长关系,即随着切顶高度增加,卸压效果逐渐增强但其增长幅度逐渐减小;切顶角度与卸压效果之间存在“S”型增长关系,即随着切顶高度增加,卸压效果先增强后减弱。卸压参数与卸压效果之间的变化规律揭示了切顶高度选择存在最适值,切顶角度选择存在最优解。综合理论分析、经济收益及数值模拟结果,确定长城六矿1301N运输巷倾斜厚硬顶板切顶留巷过程中最适切顶高度为13 m,最优切顶角度为10°。现场监测获得该切顶参数下围岩控制效果较好,留巷围岩变形量较小,可有效满足下一工作面开采需求,验证了优化切顶参数的有效性,为类似地质条件切顶留巷参数的选取提供理论依据和实践参考。

深部顶板夹煤层巷道变形破坏分析及其控制

为了探究深部顶板夹煤层软岩巷道大变形破坏问题,以平煤六矿三水平戊二胶带运输巷为工程背景,开展夹煤层巷道围岩破坏分析及控制对策的研究。首先,构建原支护体系组合拱力学模型,推导出直墙半圆拱形巷道稳定判别式;其次,提出“锚网索-梁-注浆-组合砂浆锚索”联合返修控制对策,即沿戊8煤层顶板进行巷道扩刷,采用锚网索、梯子梁完成基本支护,对围岩进行深浅孔注浆加固、顶板及两帮关键部位布置组合砂浆锚索等加强支护,并通过数值模拟分析返修前后应力、位移场分布特征;最后,开展工业性试验,并监测矿压。结果表明:两帮及顶底板最大收敛量分别为93、112 mm,后期变形速率均低于1 mm/d,围岩变形得到有效控制,返修效果良好。

近浅埋多层厚硬顶板大采高综放工作面矿压显现规律研究

针对榆神矿区近浅埋多层厚硬顶板条件下,“大周期”来压支架立柱下缩量大、煤柱应力集中系数高、稳定性差等强矿压问题,采用了数值计算、微震和煤体应力监测等技术手段,对覆岩破断运动及工作面来压规律进行了分析研究,结果表明:覆岩破断运动上,多层厚硬顶板较大的“垂向离层空间”和“自下而上”的顺次交替垮落孕育了顶板“高+低层位组合破断”的时空基础;“高低层位顶板组合破断”是“大周期”来压增强的关键诱因;同时,煤柱应力的时空演化受控于多层厚硬顶板的破断垮落。矿压显现上,工作面“大周期”立柱下缩量平均可达945 mm,持续距离12.10 m,并可由2~5次连续强来压组成;巷道煤柱应力集中系数达到1.80~2.30,影响范围为工作面前方126 m至后方471.3 m,具有明显的“高强度、大范围、长上升期”特点。针对该条件下的强矿压防治,分别提出了“弱化低位顶板、优化破断结构”和“弱化高位顶板、改变破断次序”的技术思路,并取得的了较好的应用效果。

下峪口煤矿23306下工作面回采巷道合理错距研究

近距离煤层采空区下回采巷道合理错距的确定对巷道安全高效掘进意义重大。以下峪口煤矿为工程背景,采用理论分析及现场试验的方法,对23306下进顺采空区下回采巷道合理错距进行研究。得出下峪口煤矿23306下进风顺槽合理留设错距为22 m,根据23306下进顺错距留设情况提出支护方案并根据巷道顶底板及两帮位移变化情况进行监测验证,监测发现巷道各测点顶底板及两帮的移近量均小于450 mm,大多时间内两帮的移近量小于350 mm,煤柱帮的深基点和浅基点的位移变化量基本一致,且随着巷道的掘进,未出现较大变形,说明采用22 m错距可实现围岩变形稳定,研究可为类似条件巷道安全高效生产提供经验和参考。

分段多簇密切割压裂技术在淮南矿区煤层气抽采中的应用

针对淮南矿区碎软低渗煤层瓦斯抽采技术难题,以13-1煤层为例,在分析煤层及其顶底板概况的基础上,采用煤层顶板分段压裂水平井技术,充分利用水平井水平段,单段分3簇射孔,簇间距25 m,实现分段多簇密切割体积压裂改造。微地震监测结果表明,单段裂缝长度102.5~211.4 m,缝高17.3~27 m,裂缝主体向下延伸,实现了井筒与煤层的沟通。排水采气效果表明,最高产气量1519 m^(3)/d,取得了良好的产气效果。研究成果为淮南矿区煤层气地面预抽和瓦斯区域治理提供了工程借鉴。

复合再生顶板条件下煤体固化与顶板强化技术研究及应用

为提升复合再生顶板工作面的安全性和回采效率,在平煤十二矿己16-17-31020复合再生顶板工作面开展了煤体注水固化、顶板注浆强化和管缝锚杆顶板强化试验,探索了复合再生顶板工作面矿压显现规律,评价了加固措施的支护效果。研究结果表明:加固措施实施后,工作面完整度大幅提升,降低了顶板冒落和压架等事故风险;平均来压步距由22.15 m增加至29.92 m,顶板压力由25~31 MPa降到19~26 MPa。顶板下沉量降低了50.4%,保证了工作面的正常安全回采,同时进尺速率提升了16.7%。煤体固化-顶板强化措施取得了良好的效益,可为同类型复合再生顶板工作面提供借鉴。

淮南矿区煤层顶板分段压裂水平井抽采技术及效果研究

淮南矿区为典型高瓦斯矿区,煤层碎软、渗透率低、瓦斯含量偏高、抽采难度大,为探讨地面煤层气顶板分段压裂水平井在矿区的技术可行性与瓦斯治理效果,在分析矿区主要煤层13-1煤储层特征基础上,采用应力解除法进行了煤层三向地应力测试,结果显示三向应力场类型主要为σ_(h,max)>σ_(v)>σ_(h,min),具有实施顶板分段压裂水平井技术的充分条件;利用MFrac Suite软件分别模拟了水平段距离煤层1、3、5 m时的压裂缝参数,压裂缝半长最大107.33 m、最小89.47 m,具有理想的压裂效果,说明顶板分段压裂水平井在淮南矿区具有比较好的地质适应性与可行性。以潘一煤矿13-1煤层“L”型顶板分段压裂水平井CBM01井为研究对象,采用井下钻孔检测与数值模拟等手段综合分析了瓦斯治理效果,结果显示CBM01井抽采415 d即显著降低了煤层瓦斯压力与瓦斯含量,距离水平井50、65 m处瓦斯压力由6.4 MPa分别降至2.6、2.7 MPa,降低幅度均超过55%,水平段两侧各15~20 m范围内瓦斯含量由13.5 m^(3)/t降至最大9.11 m^(3)/t、最小6.92 m^(3)/t,平均7.92 m^(3)/t,约10 m范围均降至8 m^(3)/t以下。最后,采用数值模拟方法预测了CBM01井抽采10 a的产气效果及瓦斯治理效果,气井抽采10 a累计产气约272.08×10^(4)m^(3),水平段倾向单侧约150 m范围内气含量均降至8 m^(3)/t以下、压力均降至3 MPa以下。综合研究结果表明,煤层顶板分段压裂水平井技术在淮南矿区瓦斯治理方面均具有较大的优势和应用效果。

薄煤层工作面切顶卸压留巷技术研究

为提高矿井煤炭资源回收率并提高煤炭开采效率,结合3503综采工作面开采煤层厚度薄的特点,针对性提出切顶卸压留巷技术方案,并进行工程应用。在回风巷切顶卸压留巷期间,通过锚索超前补强可提高留巷段顶板强度,为留巷工作开展创造良好条件;使用DCA-45型切缝机提高切顶钻孔施工质量,通过聚能爆破方式提高切缝效果;在滞后支护段采用密集单体进行补强,可减少采动压力、采空区顶板垮落等对留巷段围岩变形影响。现场应用后,留巷段顶板在滞后采面30 m范围内下沉量增加速度较快,随着与采面距离增加留巷段下沉量逐渐趋稳,最终下沉量控制在165 mm以内。

厚硬顶板高强度开采覆岩破断 及来压规律研究

针对榆神矿区厚硬顶板高强度开采条件下,工作面煤壁片帮大、支架结构件损坏等强矿压问题,采用了数值计算、理论分析和微震监测等技术手段,对工作面覆岩破断运动及来压规律进行了分析研究。结果表明,厚硬顶板破断具有明显的垂向分区下沉特征,高、低位岩层之间较大的垂向离层空间和自下而上顺次交替垮落孕育了顶板“高+低层位组合破断”的时空基础;“小周期”来压期间内,来压强度将随着直接顶破断发育高度的降低而减弱,直接顶碎胀系数的增大将有利于来压强度的降低;“大周期”来压期间内,中高位岩层垂向破断高度和走向破断步距的增大都将引发来压强度上升,厚硬关键层的组合破断是“大周期”来压增强的关键诱因。针对该条件下的强矿压防治,提出了“弱化低位顶板、优化破断结构”和“弱化高位顶板、改变破断次序”的技术思路,并取得了较好的应用效果。