A Gasification Technology to Combine Oil Sludge with Coal-Water Slurry:CFD Analysis and Performance Determination

The development of more environment-friendly ways to dispose of oil sludge is currently regarded as a hot topic.In this context,gasification technologies are generally seen as a promising way to combine oil sludge with coal–water slurry(CWS)and generate resourceful fuel.In this study,a novel five-nozzle gasifier reactor was analyzed by means of a CFD(Computational fluid dynamic)method.Among several influential factors,special attention was paid to the height-to-diameter ratio of the gasifier and the mixing ratio of oil sludge,which are known to have a significant impact on the flow field,temperature distribution and gasifier performances.According to the numerical results,the optimal height-to-diameter ratio and oil mixing ratio are about 2.4:1 and 20%,respectively.Furthermore,the carbon conversion rate can become as high as 98.55%with the hydrolysis rate reaching a value of 53.88%.The consumption of raw coal and oxygen is generally reduced,while the effective gas production is increased to 50.93 mol/%.

Simulation Research on Coal-Water Slurry Gasification of Oil-Based Drill Cuttings Based on Fluent

In this paper,based on Fluent software,a five-nozzle gasifier reactor was established to simulate the gasification process of oil-based drill cuttings coal-water slurry.The influence of concentration and oxygen/carbon atomic ratio on the gasification process of oil-based drill cuttings coal-water slurry was investigated.The results show that when the oxygen flow is constant,the outlet temperature of gasifier decreases,the content of effective gas increases,and the carbon conversion rate decreases with the increase of concentration;When the ratio of oxygen to carbon atoms is constant,the effective gas content rises and the temperature rises with the increase of the concentration,and the carbon conversion rate reaches the maximum value when the concentration of oil-based drill cuttings coal-water slurry is 65%;When the concentration is constant,the effective gas content decreases and the outlet temperature rises with the increase of the oxygen/carbon atom ratio,and the carbon conversion rate reaches 99.80%when the oxygen/carbon atom ratio is 1.03.It shows that this method can effectively decompose the organic matter in oilbased drill cuttings and realize the efficient and cooperative treatment of oil-based drill cuttings.

Effect of the benzene ring of the dispersant on the rheological characteristics of coal-water slurry:Experiments and theoretical calculations

In this study,low-rank coal-water slurry(LCWS)was prepared using polyoxyethylene dodecylphenol ether(PDPE)and polyoxyethylene lauryl ether(PLE),respectively.A combination of experiments and simulations was used to investigate the pulping properties and microscopic mechanism of the LCWS samples prepared using the two agents,so as to explore the influence of benzene ring on the performance of dispersant.The results of the LCWS preparation experiments revealed that the pulp-forming performance of PDPE exceeded that of PLE.When LCWS concentration is 62%,64%,and 66%,the apparent viscosity corresponding to PDPE is 247.80,504.17,and 653.10 mPa·s,and the apparent viscosity corresponding to PLE is 548.10,1470.61,and 1549.98 mPa·s,respectively.The C_(1000)(When the apparent viscosity is 1000 mPa·s,the corresponding concentration of LCWS is defined as C_(1000))values of PDPE and PLE are 67.60%and 62.95%,respectively.In addition to the van der Waals forces and hydrogen bonds between the PDPE and/or PLE molecules and coal,the benzene rings of PDPE presentπ-πstacking effect with the aromatic rings of coal.That could facilitate and strengthen the adsorption of PDPE on coal,which would be conducive to further improving the dispersion of coal particles.The two dispersants have no significant difference in effect on the pyrolysis of LCWS.The simulation results indicated that the times for PDPE and PLE molecules to reach flat adsorption state on coal are approximately 290 and 565 ps,respectively.The self-diffusion coefficient(D)of the PDPE and PLE on coal is 3.16 x 10^(-6)and6.57×10^(-6)m~2/s,respectively,and their interaction energies with coal are 785.71 and 648.60 kcal/mol,respectively.The results of the simulation calculations demonstrated that PDPE adsorbed on coal easier than PLE,and its binding is more stable than that of PLE owing to theπ-πstacking effect,which is conducive to uniform dispersion of coal in solution.The simulation results confirmed the experimental results.

Synthesis, characterization and application of a dispersant based on rosin for coal-water slurry

A rosin derivative and maleopimaric acid diethanolamide(MAD), was synthesized, characterized by FTIR and1 H NMR, and applied as dispersant for the coal-water slurry(CWS) prepared from Chinese Shenfu coal. The CWS application performance investigation shows that the MAD dispersant has better abilities in reducing CWS viscosity and stabilizing the slurry than a commercial dispersant—sulfonated naphthalene-formaldehyde condensate(SNF). The physicochemical property investigation of the two tested dispersants shows that the adsorption amount of the MAD at coal-water interface is much larger than that of SNF, and the MAD has better wetting property than the SNF on the coal surface. It indicated that the excellent capabilities of MAD are related to the adsorption mode of standing upright on the coal surface. Based on the above, the mechanism of dispersion and stabilization of the CWS prepared from MAD dispersant is presented.

Effect of the high-power electromagnetic pulses on the reactivity of the coal-water slurry in hot environment

An effect of the high-power electromagnetic pulses onto the droplet of coal-water slurry inside the furnace was investigated.In contrary to the previously investigated laser-induced fuel atomization that occurs at the room temperature,the pre-heated(to 400 K)slurry becomes dry enough to prevent the explosion-like steam formation.Thus,fuel does not atomize and the ignition does not accelerate.Furthermore,the absorption of several laser pulses leads to evident sintering of irradiated surface with following increase of the ignition delay time for up to 24%.Variation of the pulse energy in range 48-118 mJ(corresponding intensity up to 2.4 J·cm^-2)leads to certain variation of the increase of ignition delay.The strong pulsed overheating of the coal water slurry which does not initiate the fine atomization of the fuel generally makes its ignition longer.

Artificial neural network approach for rheological characteristics of coal-water slurry using microwave pre-treatment

Detailed experimental investigations were carried out for microwave pre-treatment of high ash Indian coal at high power level(900 W) in microwave oven. The microwave exposure times were fixed at60 s and 120 s. A rheology characteristic for microwave pre-treatment of coal-water slurry(CWS) was performed in an online Bohlin viscometer. The non-Newtonian character of the slurry follows the rheological model of Ostwald de Waele. The values of n and k vary from 0.31 to 0.64 and 0.19 to 0.81 Pa·sn,respectively. This paper presents an artificial neural network(ANN) model to predict the effects of operational parameters on apparent viscosity of CWS. A 4-2-1 topology with Levenberg-Marquardt training algorithm(trainlm) was selected as the controlled ANN. Mean squared error(MSE) of 0.002 and coefficient of multiple determinations(R^2) of 0.99 were obtained for the outperforming model. The promising values of correlation coefficient further confirm the robustness and satisfactory performance of the proposed ANN model.

Combustion and Sulfur-fixing Performance of Pulping Black Liquor Coal-water Slurry

The effects of adding pulping black liquor and other additives to coal-water slurry(CWS) on the sulfur-fixing performance of the resultant mixture(pulping black liquor coal-water slurry) were evaluated. The experimental results demonstrated that the ash content of the black liquor coalwater slurry decreased as the addition of pulping black liquor in the mixture increased. Nevertheless, the addition amount should be appropriately selected to ensure that the black liquor coal-water slurry had a moderate calorific value. Addition of black liquor improved the combustion performance of CWS by lowering the ignition point and stabilizing the combustion process; moreover, the sulfur-fixation ratio after combustion increased by 12 to 16 percentage points than that of CWS, and the content of high-melting-point salt in the ash from CWS after adding black liquor was low. The sulfur-fixing ratio of CWS after adding a sulfur-fixing agent was effectively increased by 25 to 30 percenatge points, but with compromise of the fluidity and stability of the CWS; thus, the addition amount of a sulfur-fixing agent should be optimized.

A novel 3-layer mixed cultural evolutionary optimization framework for optimal operation of syngas production in a Texaco coal-water slurry gasifier

Optimizing operational parameters for syngas production of Texaco coal-water slurry gasifier studied in this paper is a complicated nonlinear constrained problem concerning 3 BP(Error Back Propagation) neural networks. To solve this model, a new 3-layer cultural evolving algorithm framework which has a population space, a medium space and a belief space is firstly conceived. Standard differential evolution algorithm(DE), genetic algorithm(GA), and particle swarm optimization algorithm(PSO) are embedded in this framework to build 3-layer mixed cultural DE/GA/PSO(3LM-CDE, 3LM-CGA, and 3LM-CPSO) algorithms. The accuracy and efficiency of the proposed hybrid algorithms are firstly tested in 20 benchmark nonlinear constrained functions. Then, the operational optimization model for syngas production in a Texaco coal-water slurry gasifier of a real-world chemical plant is solved effectively. The simulation results are encouraging that the 3-layer cultural algorithm evolving framework suggests ways in which the performance of DE, GA, PSO and other population-based evolutionary algorithms(EAs) can be improved,and the optimal operational parameters based on 3LM-CDE algorithm of the syngas production in the Texaco coalwater slurry gasifier shows outstanding computing results than actual industry use and other algorithms.

Application of coal-water slurry on the rotary calcining kiln of pedgion magnesium reduction process

Energy saving has been an important concept in modern industry especially to the countries and regions with energy shortage such as China and Japan. Utilization of Coal-Water Slurry （CWS） can improve the burning efficiency of coal and reduce the pollutions of soot, sulfide and the nitride by burning lump coal directly. The CWS is a promising energy saving technique and the effectual substitute of oil. The study on the preparation and application of the CWS has made progresses in many aspects. The present paper studied the basal problems for applying the CWS on the rotary kilns during the calcining-dolomite process in the magnesium factory, summarized the key points for the application process of the CWS and gave the corresponding solutions.

Study on Characteristics of Different Types of Nozzles for Coal-Water Slurry Atomization

Three types of nozzles: a low-pressure multistage nozzle, an effervescent nozzle and a newly developed internal- mixing air-blast nozzle, for atomization of Coal-Water Slurry (CWS) were investigated. Influence of CWS properties including surface tension and apparent viscosity on atomization was studied. Comparisons among the nozzles were carried out in terms of spray droplet mean diameter and fuel output. Versatility of each nozzle was investigated and atomization mechanism of each nozzle was analyzed as well. The results showed that the newly developed internal- mixing air-blast nozzle has high fuel output and small mean droplet size in the spray, but the multistage nozzle has high versatility for handling of low quality CWS.

A comparative investigation of the properties of coal-water slurries prepared from Australia and Shenhua coals

Two coal samples of similar rank were chosen from Australia and China to investigate the differences in Coal-Water Slurry （CWS） made from them. The effect of ash content and particle size gradation on these properties was also studied. Different grinding times were used when grinding the two coals and particle size analysis of these ground coals was used to select samples with a ＂double-peak＂ particle size distri- bution. All the ＂double-peak＂ samples were used to prepare a CWS. The concentration, viscosity, fluidity, and stability of each CWS were measured. The results show that the properties ofa CWS prepared from a coal sample with a ＂double-peak＂ size distribution are better than those CWS prepared from samples with a mono-modal particle distribution. The ash content of Australian coal is 21.72g higher than the ash content of Shenhua coal. The highest coal concentration in slurry from the Australia coal is 11.01% higher than in CWS from the Shenhua coat. The fluidity and stability of the CWS prepared from the Australian coal are both better than the fluidity and stability of slurry prepared from Shenhua coal. High ash content in the Australian coal imnroves the nulning results of a CWS made from it.

Research on casing deformation prevention technology based on cementing slurry system optimization

The casing deformation prevention technology based on the optimization of cement slurry is proposed to reduce the casing deformation of shale oil and gas wells during hydraulic fracturing. In this paper, the fracture mechanism of hollow particles in cement sheath was firstly analyzed by discrete element method, and the effect of hollow particles in cement on casing deformation was investigated by laboratory experiment method. Finally, field test was carried out to verify the improvement effect of the casing deformation based on cement slurry modification. The results show that the formation displacement can be absorbed effectively by hollow particles inside the cement transferring the excessive deformation away from casing. The particles in the uncemented state provide deformation space during formation slipping. The casing with diameter of 139.7 mm could be passed through by bridge plug with the diameter of 99 mm when the mass ratio of particle/cement reaches 1:4. According to the field test feedback, the method based on optimization of cement slurry can effectively reduce the risk of casing deformation, and the recommended range of hollow microbeads content in the cement slurry is between 15% and 25%.

Influence of filler characteristics on particle removal in fluid catalytic cracking slurry under an alternating electric field

The characteristics of the packing material under an alternating electric field are an important factor in the removal of FCCS particles.In this study,the electric field distribution of a separation unit consisting of packed spheres under an alternating electric field is simulated,and the movement mechanism of catalyst particles is analysed.An"effective contact point"model is derived to predict the adsorption of filler contact points on catalyst particles under the alternating electric field,and the model is validated by simulations and experiments.The numerical calculation and experimental results indicate that the electrical properties of the filler spheres,the filler angleθ,and the frequency f of the alternating electric field affect the adsorption of catalyst particles.As the frequency of the electric field increases,the particle removal efficiency of the high-conductivity filler(silicon carbide)increases and then settles,and the separation efficiency of the low-conductivity filler(glass,zirconia)is not sensitive to the change in electric field frequency.

Preparation and Electrochemical Performance Study of Catalytic Cracking Oil Slurry-based Porous Carbon Materials

Catalytic cracking oil slurry is a by-product of catalytic cracking projects,and the efficient conversion and sustainable utilization of this material are issues of continuous concern in the petroleum refining industry.In this study,oxygen-enriched activated carbon is prepared using a one-step KOH activation method with catalytic cracking oil slurry as the raw material.The as-prepared oil slurry-based activated carbon exhibits a high specific surface area of 2102 m^(2)/g,welldefined micropores with an average diameter of 2 nm,and a rich oxygen doping content of 32.97%.The electrochemical performance of the nitrogen-doped porous carbon is tested in a three-electrode system using a 6 mol/L KOH solution as the electrolyte.It achieves a specific capacitance of up to 230 F/g at a current density of 1 A/g.Moreover,the capacitance retention rate exceeds 89%after 10000 charge and discharge cycles,demonstrating excellent cycle stability.This method not only improves the utilization efficiency of industrial fuel waste but also reduces the production cost of supercapacitor electrode materials,thereby providing a simple and effective strategy for the resource utilization of catalytic cracking oil slurries.

Current collectors’ effects on the electrochemical performance of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2) suspension electrodes for lithium slurry battery

Take after the advantages of lithium-ion battery (LIB) and redox flow battery (RFB), semi-solid flow battery (SSFB) is a promising electrochemical energy storage device in renewable energy utilization. The flowable slurry electrode realizes decouple of energy and power density, while it also brings about new challenge to SSFBs, electron transport between active material and the out circuit. In this consideration, three types of current collectors (CCs) are applied to study the resistance and electrochemical performances of slurry cathodes within pouch cells for the first time. It proves that the electronic resistance (Re) between slurry electrode and the CC plays a decisive role in SSFB operation, and it is so large when Al foil is adopted that the cell cannot even work. Contact angle between Ketjen black (KB) slurry without active material (AM) and the CC is a preliminarily sign for the Re, the smaller the angle, the lower the resistance, and the better electrochemical performance of the cell.

Enhanced recovery of high-purity Fe powder from iron-rich electrolytic manganese residue by slurry electrolysis

Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.

Rapid prediction of flow and concentration fields in solid-liquid suspensions of slurry electrolysis tanks

Slurry electrolysis(SE),as a hydrometallurgical process,has the characteristic of a multitank series connection,which leads to various stirring conditions and a complex solid suspension state.The computational fluid dynamics(CFD),which requires high computing resources,and a combination with machine learning was proposed to construct a rapid prediction model for the liquid flow and solid concentration fields in a SE tank.Through scientific selection of calculation samples via orthogonal experiments,a comprehensive dataset covering a wide range of conditions was established while effectively reducing the number of simulations and providing reasonable weights for each factor.Then,a prediction model of the SE tank was constructed using the K-nearest neighbor algorithm.The results show that with the increase in levels of orthogonal experiments,the prediction accuracy of the model improved remarkably.The model established with four factors and nine levels can accurately predict the flow and concentration fields,and the regression coefficients of average velocity and solid concentration were 0.926 and 0.937,respectively.Compared with traditional CFD,the response time of field information prediction in this model was reduced from 75 h to 20 s,which solves the problem of serious lag in CFD applied alone to actual production and meets real-time production control requirements.

Impacts of solid physical properties on the performances of a slurry external airlift loop reactor integrating mixing and separation

Solid physical properties are vital for the design, optimization, and scale-up of gas–liquid–solid multiphase reactors. The complex and interactional effects of the solid physical properties, including particle diameter, density, wettability, and sphericity, on the hydrodynamic behaviors in a new external airlift loop reactor(EALR) integrating mixing and separation are decoupled in this work. Two semi-empirical equations are proposed and validated to predict the overall gas holdup and liquid circulating velocity satisfactorily, and then the individual influence of such solid physical properties is further investigated. The results demonstrate that both the overall gas holdup in the riser and the liquid circulating velocity in the downcomer increase with the contact angle, but decrease with particle size, density, and sphericity.Additionally, the impact of the particle size on the liquid circulating velocity is also profoundly revealed on a micro-level considering the particle size distribution. Moreover, the axial solid concentration distribution is discussed, and the uniformity of the slurry is described by the mixing index of the solid particles. The results show that a more homogeneous mixture can be achieved by adding finer particles other than attaining violent turbulence. Therefore, this work lays a foundation for the design, scale-up, and industrialization of the EALRs.

Kinetic mechanism of copper extraction from methylchlorosilane slurry residue using hydrogen peroxide as oxidant

Copper was extracted from methylchlorosilane slurry residue by a direct hydrogen peroxide leaching method.A number of experimental parameters were analyzed to determine the extraction efficiency of copper.The extraction efficiency of copper reached 98.5%under the optimal leaching conditions,such as the hydrogen peroxide concentration of 1.875 mol·L^(-1),the leaching temperature of 323 K,the liquid–solid ratio of 20 ml·g^(-1),and the stirring speed of 300 r·min^(-1).The leaching kinetics of the copper extraction process was then described by the shrinking core model.There were two stages.The first stage was controlled by chemical reactions,while the second stage was controlled by interface transfer and product layer diffusion.The activation energy and kinetic control equations were determined,as well as an explanation of the leaching mechanism of copper extraction based on kinetic analysis and materials characterization.Copper resources can be recovered from the methylchlorosilane slurry residue efficiently and inexpensively with the methods used in this study.

Physical model investigation on effects of drainage condition and cement addition on consolidation behavior of tailings slurry within backfilled stopes

Estimation of stressses within the tailings slurry during self-weight consolidation is a critical issue for cost-effective barricade design and efficient backfill planning in underground mine stopes.This process requires a good understanding of self-weight consolidation behaviors of the tailings slurry within practical stopes,where many factors can have significant effects on the consolidation,including drainage condition and cement addition.In this paper,the prepared tailings slurry with different cement contents(0,4.76wt%,and 6.25wt%)was poured into1.2 m-high columns,which allowed three drainage scenarios(undrained,partial lateral drainage near the bottom part,and full lateral drainage boundaries)to investigate the effects of drainage condition and cement addition on the consolidation behavior of the tailings slurry.The consolidation behavior was analyzed in terms of pore water pressure(PWP),settlement,volume of drainage water,and residual water content.The results indicate that increasing the length of the drainage boundary or cement content aids in PWP dissipation.In addition,constructing an efficient drainage boundary was more favorable to PWP dissipation than increasing cement addition.The final stable PWP on the column floor was not sensitive to cement addition.The final settlement of uncemented tailings slurry was independent of drainage conditions,and that of cemented tailings slurry decreased with the increase in cement addition.Notably,more pore water can drain out from the cemented tailings slurry than the uncemented tailings slurry during consolidation.