Seismic Behavior of Diaphragm-Through Connections of Concrete-Filled Square Steel Tubular Columns and H-Shaped Steel Beams

Based on the introductions of a type of diaphragm-through connection between concrete-filled square steel tubular columns (CFSSTCs) and H-shaped steel beams,a finite element model of the connection is developed and used to investigate the seismic behavior of the connection.The results of the finite element model are validated by a set of cyclic loading tests.The cyclic loading tests and the finite element analyses indicate that the failure mode of the suggested connections is plastic hinge at the beam with inelastic rotation angle exceeding 0.04 rad.The suggested connections have sufficient strength,plastic deformation and energy dissipation capacity to be used in composite moment frames as beam-to-column rigid connections.

Influence of Axial Load Ratio on Shear Behavior of Through-Diaphragm Connections of Concrete-Filled Square Steel Tubular Columns

Nonlinear finite element analysis and parametric studies were carried out to study the influence of axial load ratio on the shear behavior of the through-diaphragm connections of concrete-filled square steel tubular columns. The analysis reveals that smaller axial load ratio can improve the shear bearing capacity and ductility while larger axial load ratio will decrease the shear behavior of the through-diaphragm connections. The parametric studies indicate that the axial load ratio should be limited to less than 0.4 and its influence should be considered in the analysis and design of such connections.

Approach for analyzing the ultimate strength of concrete filled steel tubular arch bridges with stiffening girder

A convenient approach is proposed for analyzing the ultimate load carrying capacity of concrete filled steel tubular (CFST) arch bridge with stiffening girders. A fiber model beam element is specially used to simulate the stiffening girder and CFST arch rib. The geometric nonlinearity, material nonlinearity, influence of the construction process and the contribution of prestressing reinforcement are all taken into consideration. The accuracy of this method is validated by comparing its results with experimental results. Finally, the ultimate strength of an abnormal CFST arch bridge with stiffening girders is investigated and the effect of construction method is discussed. It is concluded that the construction process has little effect on the ultimate strength of the bridge.

Seismic Behaviour of Beam-Column Joints of Precast and Partial Steel Reinforced Concrete

A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading.Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete( RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition,the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens,followed by column failure and connections failure. The failure of the core joint region occurs finally.Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.

Static behavior of semi-rigid thin-walled steel-concrete composite beam-to-column joints with bolted partial-depth flush end plate:experimental study

A new type of semi-rigid thin-walled steel-concrete composite beam-to-column joint has been proposed in this paper.Five semi-rigid composite beam-to-column joint specimens subjected to hogging moments under monotonic loading were tested to study the static behavior of this new type of joint.The main variable parameters for the five joint specimens were the longitudinal reinforcement ratio and the joint type.The experimental results designated that the magnitude of extension of the longitudinal reinforcement is the most important factor that influenced the moment-rotation characteristic of the new type of joint.The concrete slabs could resist 3.8%-19.1% of the total shear load applied to the cross-sections near the beam-to-column connection.The edge stiffened elements,such as the flange of the lipped I-section thin-walled steel beam,were capable of having considerable inelastic deformation capacity although they had comparatively large width-to-thickness ratios.The shear failure of the concrete cantilever edge strip must be taken into account in practical design because it has significant influence on the anchorage of the longitudinal reinforcement in the new type of external joints.

Seismic performance of steel reinforced ultra high-strength concrete composite frame joints

To investigate the seismic performance of a composite frame comprised of steel reinforced ultra high-strength concrete （SRUHSC） columns and steel reinforced concrete （SRC） beams, six interior frame joint specimens were designed and tested under low cyclically lateral load. The effects of the axial load ratio and volumetric stirrup ratio were studied on the characteristics of the frame joint performance including crack pattern, failure mode, ductility, energy dissipation capacity, strength degradation and rigidity degradation. It was found that all joint specimens behaved in a ductile manner with flexural-shear failure in the joint core region while plastic hinges appeared at the beam ends. The ductility and energy absorption capacity of joints increased as the axial load ratio decreased and the volumetric stirIup ratio increased. The displacement ductility coefficient and equivalent damping coefficient of the joints fell between the corresponding coefficients of the steel reinforced concrete （SRC） frame joint and RC frame joint. The axial load ratio and volumetric stirrup ratio have less influence on the strength degradation and more influence on the stiffness degradation. The stiffness of the joint degrades more significantly for a low volumetric stirrup ratio and high axial load ratio. The characteristics obtained from the SRUHSC composite frame joint specimens with better seismic performance may be a useful reference in future engineering applications.

Cyclic behavior of stiffened joints between concrete-filled steel tubular column and steel beam with narrow outer diaphragm and partial joint penetration welds

This paper presented an investigation on a stiffened joint in practical engineering which was between concrete-filled steel tubular column and steel beam with narrow outer diaphragm and partial joint penetration welds. Through the low-frequency cyclic loading test, the cyclic behavior and failure mode of the specimen were investigated. The results of the test indicated the failure mode and bearing capacity of the specimen which were influenced by the axial compression ratio of the concrete-filled tubular column. On the contrary, the inner diaphragm and inner stiffeners had limited impacts on the hysteretic behavior of the joint. There was no hysteresis damage fracture on the narrow outer diaphragm connected to the concrete-filled steel tubular column with partial joint penetration welds. Due to the excellent ductility and energy dissipating capacity, the proposed joint could be applied to the seismic design of high-rise buildings in highly intensive seismic region, but axial compression ratio should be controlled to avoid unfavorable failure modes.

Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

A composite shear wall concept based on concrete filled steel tube （CFST） columns and steel plate （SP） deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements： CFST columns; SP deep beams; and reinforced concrete （RC） strips. The RC strips are intended to allow the core structural elements - the CFST columns and SP deep beams - to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

L形冷弯薄壁型钢组合钢管混凝土柱轴压性能

为解决异形钢管混凝土柱阴角对其承载力的影响,提出了用1个冷弯薄壁方钢管和2个U形钢管焊接成L形钢管,内填充混凝土形成L形冷弯薄壁型钢组合钢管混凝土柱形式。设计了5组共10根试件的轴压试验,并开展了有限元参数分析,研究了钢管厚度、U形管外伸长度和钢材强度等参数对构件承载力和延性等力学性能的影响。结果表明:该类试件的主要破坏形态为中上部局部鼓曲破坏,适量增大U形管外伸长度可以提高承载力,但增大到一定程度之后易发生弯扭破坏;承载力和延性随着钢管厚度和钢材强度增大而增加;混凝土强度对构件的初始刚度和峰值荷载的影响都很小,但对曲线下降段的影响较大;试件端部和中部截面阴角处的混凝土应力值比各边中部更大,说明采用U形钢管与方钢管组合的方式改善了阴角处钢管对混凝土约束普遍较弱的问题。基于“统一理论”,给出了两种承载力建议计算公式,与试验结果吻合较好,两种计算方法在0.44~1.94的约束效应系数范围内具有良好的适用性。

新型钢管混凝土梁柱节点力学性能试验研究

为研究内加强环式圆钢管混凝土柱与矩形钢管混凝土梁这种新型连接节点的力学性能,设计了缩尺钢管混凝土梁柱节点试件,开展了相同梁柱节点试件的静力加载试验和低周往复加载试验。通过研究该节点试件的破坏模式、荷载-位移曲线以及拟静力加载试验的骨架曲线、核心区剪切变形等,分析了节点试件的承载能力、延性和耗能能力,全面考察了同一梁柱节点在静力加载和低周往复加载两种工况下的受力性能和破坏模式。结果表明:钢管混凝土梁柱节点试件核心区强度较强,破坏模式主要为梁端破坏,低周往复加载试验时试件梁柱连接处附近的梁端钢板发生拉裂破坏和钢板鼓曲,静力加载试验时试件梁端焊缝发生拉裂破坏;试件延性较好,加载过程中经历了弹性、弹塑性和塑性发展阶段。最后提出了该类钢管混凝土梁柱节点核心区的抗剪强度计算公式。

RPC外包方钢管混凝土柱轴压受力性能研究

为了研究活性粉末混凝土(Reactive powder concrete,RPC)外包方钢管混凝土柱的轴压受力性能,以RPC厚度和长细比为参数,对6根构件开展轴压试验研究,探讨该类组合柱的破坏模式、受力机理、套箍效应和承载力。试验结果表明:外层RPC可为内部方钢管混凝土柱提供较强的约束力,在受力后期套箍效应凸显。随着RPC厚度的增加,组合柱的承载力逐渐提高;随着组合柱长细比的增大,虽然其弹性刚度和承载力逐渐降低,但延性改善。采用ABAQUS软件建立RPC外包方钢管混凝土柱的有限元模型,分析RPC强度、RPC厚度、钢管强度等级、含钢率、内部混凝土强度和长细比等参数对组合柱承载力的影响规律,可得方钢管混凝土柱发挥系数的变化幅值为0.78~1.01。在试验研究、有限元参数分析和理论探讨的基础上,借鉴钢管混凝土结构技术规范,提出了RPC外包方钢管混凝土轴压短柱和长柱的承载力简化计算方法,公式计算值与已有数据样本吻合良好。

钢管混凝土键连接框架梁和剪力墙的受剪性能

目的 研究钢管混凝土键连接框架梁和剪力墙的受剪性能,为工程应用提供设计依据。方法 应用有限元分析软件ABAQUS对比钢管混凝土键连接与现浇连接梁墙的结构受剪性能,分析前者受剪机理及不同因素对受剪性能的影响。结果 钢管混凝土键连接梁墙的结构承载力和延性系数较现浇结构分别提高约10%和34%;钢材强度从Q235到Q390,初始刚度增加8.44%;截面高度从100 mm到120 mm,延性系数提高17.73%;截面厚度每增加2 mm,承载力提高约15%;截面长度和混凝土强度等级对承载力、初始刚度和延性系数的影响均小于15%,纵向距离对其受剪性能几乎无影响。结论 采用钢管混凝土键连接梁墙的结构总体受剪性能优于现浇结构;钢材强度和截面厚度分别是影响初始刚度和承载力的主要因素。

圆钢管超高性能混凝土短柱偏压力学性能研究

为研究钢管超高性能混凝土短柱的偏压性能,以荷载偏心率和钢管径厚比为变化参数,设计了12个圆钢管UHPC短柱试件并对其进行偏心受压加载试验,分析了该类构件的破坏模式、荷载-挠度曲线、钢管应变和变形系数等,考察了主要因素对短柱偏压性能的影响规律。结果表明:试件的破坏特征为钢管屈服和核心混凝土压坏;荷载-挠度曲线有较明显的峰值点,偏心率越大和径厚比越小,曲线的下降段越平缓;达到60%峰值荷载时,钢管开始产生明显的约束作用,达到90%峰值荷载时,截面变形不再符合平截面假定;偏心率增大使试件的承载力和刚度下降,而径厚比减小可降低这种不利影响。在试验基础上,结合数值模拟对短柱的N-M曲线进行分析,建立了临界偏心率和套箍系数的关系表达式,并基于此提出短柱偏压承载力实用计算方法,理论与试验结果吻合较好。

高寒环境温度下钢管混凝土柱抗震性能试验研究

为探究高寒地区环境温度对圆钢管混凝土柱抗震性能的影响,开展4种不同温度工况下钢管混凝土柱的拟静力试验研究,分析不同环境温度下各试件的破坏特征、承载力、滞回特性、刚度退化、延性及耗能能力,揭示环境温度变化对钢管混凝土柱抗震性能的影响规律。试验结果表明:不同环境温度下各试件滞回曲线均呈梭形,未产生明显捏缩现象;试件典型破坏模式在不同温度下基本一致,均为钢管底部产生一圈贯通鼓曲波、核心混凝土被压溃、钢管撕裂,温度越低,钢管混凝土柱越早发生破坏,且破坏程度越严重;相较于常温(20℃)工况,0℃、-20℃、-40℃温度工况下,试验钢管混凝土柱水平承载力分别提高3.08%、6.15%、10.08%,初始刚度分别提高16.9%、30.3%、50.0%,而延性系数分别降低8.6%、14.6%、16.9%;环境温度越低,刚度退化速率也越大。温度变化对钢管混凝土柱抗震性能影响显著,高寒地区钢管混凝土结构抗震设计时需考虑环境低温对结构带来的不利影响。

开槽侧板加强型连接梁柱节点子结构抗连续倒塌性能研究

为了优化侧板加强型节点的抗连续倒塌性能,提出了一种开槽侧板加强型梁柱连接节点形式。通过静力加载试验,得到了新型节点子结构的破坏模式、竖向抗力发展机制、应变分布、延性水平和动力承载力等。试验结果表明:钢梁翼缘在盖板附近首先开裂并向腹板外排螺栓中部延伸贯穿,导致竖向承载力快速下降为峰值荷载的20%左右。相比传统侧板加强型和圆弧扩盖板型梁柱节点,新型节点的峰值承载力分别提高了62.1%和19.6%,塑性弦转角分别提高了203.6%和25.8%。通过有限元分析得到了试件的断裂路径发展过程,进一步地通过参数化分析发现:扩大过焊孔构造对改善峰值后塑性弦转角及残余强度提升无明显作用;随着螺栓群远离钢梁翼缘起始断裂位置,最小残余强度比不断增大,但峰值后塑性弦转角呈先增大后减小的趋势;当螺栓群内移45mm时,峰值后塑性弦转角及最小残余强度比分别达到0.149rad和0.88,提高了38.2%和200.8%。

预应力混凝土梁-型钢混凝土柱框架节点抗震性能试验研究

预应力混凝土框架结构具有较好的抗裂性能和较高的承载能力,但在实际工程中,裂缝控制要求较为严格,容易出现预应力混凝土框架梁端配筋过多,进而导致梁端承载力过剩,难以实现“强柱弱梁”的抗震设计原则。针对这一问题,提出3种不同连接形式的预应力混凝土梁-型钢混凝土柱节点,通过6个预应力混凝土梁-型钢混凝土柱框架节点试件的低周反复加载试验,研究抗裂等级(影响梁预应力筋数量)、梁柱节点形式对节点破坏形态、滞回曲线、延性、刚度退化等影响规律。研究结果表明:3种不同连接形式的6个试件均发生了“梁端弯剪破坏”,而节点和柱破坏轻微,预应力混凝土框架节点通过使用型钢混凝土柱实现了“强柱弱梁”的抗震设计目标,试件延性和耗能能力较好;二级抗裂的节点试件强度退化、割线刚度退化较三级抗裂更快,抗震性能稍差;三种形式的节点中,形式2节点的强度退化、刚度退化较慢,抗震性能较好,且施工方便。

内置H型钢的圆铝管混凝土短柱轴压性能分析

为研究内置H型钢的圆铝合金管混凝土短柱的轴压力学性能及受力机理,采用ABAQUS建立了该类试件的有限元模型,在有限元验证基础上,研究了试件在轴向荷载作用下的破坏形态,对典型试件进行了受力全过程分析以及接触力分析,研究了试件不同高度处的截面各组成部分的荷载分担情况,总结了试件各部分之间接触应力的变化规律;研究了混凝土抗压强度、含钢率、铝合金管壁厚以及截面构造对试件轴压力学性能的影响。结果表明:试件在轴向荷载作用下铝合金管、混凝土以及H型钢表现出良好的组合效应,通过参数分析发现,轴压短柱受力过程中的横向变形随着混凝土立方体抗压强度增大而增大,参数分析中圆铝合金管壁厚对轴压短柱的承载能力影响最大。可见内置H型钢的圆铝合金管混凝土柱组合构件在受轴向荷载时表现出较强的承载能力以及良好的抵抗变形能力。

大高宽比矩形钢管混凝土柱压弯性能研究

为了研究大高宽比矩形钢管混凝土柱的压弯性能,对大高宽比钢管混凝土短柱进行偏压试验并结合有限元模拟补充了4组试件进行对比,包括不同偏心率、高宽比、钢管壁厚度、截面尺寸情况下柱性能的对比分析。最后参考常用的4本国内外规范进行柱承载力计算,对比并判断现有规范是否适用。结果表明:试件破坏模式均为长边鼓曲,当荷载小于极限承载力的80%时,横截面高度上的应变分布服从平截面假定;随着偏心率增大,柱延性提升,在偏心率超过0.205后,柱延性开始下降;随着壁厚增加,柱延性提升,在壁厚达到8 mm后,柱延性开始下降;随着高宽比提升,柱延性降低;随着截面尺寸增大,在壁厚不变的情况下,柱延性降低,在壁厚等比例增大时,柱延性变化不大;随着高宽比、截面尺寸、钢管壁厚度的增大,柱承载力提升;随着偏心率升高,柱承载力降低;参考规范JGJ 138—2016对大高宽比钢管混凝土柱偏压承载力的计算更为准确。

钢管混凝土柱-钢梁连接节点形式与研究进展

钢管混凝土结构体系中,梁柱节点的受力状态复杂,是结构体系中的关键连接部位,对结构的承载力、刚度以及稳定性能均有重要影响。对国内外钢管混凝土柱-钢梁连接节点的相关研究进行了全面的综述,总结了内加强型连接节点、外加强型连接节点、贯通式连接节点、螺栓连接节点等各类钢管混凝土柱-钢梁连接节点形式的特点和已有研究,从承载力、刚度、破坏模式、抗震性能、设计方法等方面对各类连接节点的优势和存在的问题进行了分析和归纳。旨在为钢管混凝土柱-钢梁连接节点的相关研究提供参考,促进钢管混凝土柱结构体系的研究和工程应用。

钢管高强再生混凝土叠合柱偏压性能

为研究钢管高强混凝土叠合柱偏心受压性能,以混凝土类型和偏心距为参数,完成了6根叠合柱偏心受压试验,研究了不同参数对钢管高强混凝土叠合柱损伤发展过程、破坏特征、承载力和延性的影响,并基于《钢管混凝土叠合柱结构技术规程》(T/CECS 188—2019)和相关学者提出的公式对16根钢管混凝土叠合柱的偏压承载力进行了计算。研究结果表明:再生混凝土叠合柱与普通混凝土叠合柱的受力过程均经历了弹性、带裂缝工作和破坏3个阶段,表现出外围混凝土保护层被压碎脱落、纵筋鼓曲和箍筋外鼓等破坏特征;与普通混凝土叠合柱相比,再生混凝土叠合柱的初始刚度和变形能力有所降低,但承载力略高;随着偏心距的增加,钢管混凝土叠合柱的初始刚度和承载力迅速降低,而位移延性系数迅速增大,中和轴逐渐向受压区移动,与平截面假定的吻合度有所降低;钢管混凝土叠合柱偏压承载力计算应考虑钢管自身承载力以及钢管对核心混凝土约束效应的影响。