Bimetallic composite material of bainitic steel and PD3 steel was produced with electroslag casting process, and element distribution of its composite interface was investigated by theoretical calculation and energy d...Bimetallic composite material of bainitic steel and PD3 steel was produced with electroslag casting process, and element distribution of its composite interface was investigated by theoretical calculation and energy dispersive spectrometer(EDS). Results show that the tensile strength(1,450 MPa), hardness(HRC 41-47) and impact toughness(94.7J·cm^(-2)) of bainitic steel were comparatively high, while its elongation was slightly low(4.0%). Tensile strength(1,100 MPa), hardness(>HRC 31) and elongation(7.72%) of the interface were also relatively high, but its impact toughness was low at 20.4 J·cm^(-2). Results of theoretical calculation of the element distribution in the interface region were basically consistent with that of EDS. Therefore, electroslag casting is a practical process to produce bimetallic composite material of bainitic steel and PD3 steel, and theoretical calculation also is a feasible method to study element distribution of their interface.展开更多
Additive manufacturing enables processing of functionally graded materials(FGMs)with flexible spatial design and high bonding strength.A steel-copper FGM with high interfacial strength was developed using laser powder...Additive manufacturing enables processing of functionally graded materials(FGMs)with flexible spatial design and high bonding strength.A steel-copper FGM with high interfacial strength was developed using laser powder bed fusion(LPBF).The effect of laser process parameters on interfacial defects was evaluated by X-ray tomography,which indicates a low porosity level of 0.042%therein.Gradient/fine dendritic grains in the interface are incited by high cooling rates,which facilitates interface strengthening.Multiple mechanical tests evaluate the bonding reliability of interface;and the fatigue tests further substantiate the ultrahigh bonding strength in FGMs,which is superior to traditional manufacturing methods.Mechanisms of the high interfacial bond strength were also discussed.展开更多
基金financially supported by the Hebei Province Science and Technology Support Program(No.14211007D)
文摘Bimetallic composite material of bainitic steel and PD3 steel was produced with electroslag casting process, and element distribution of its composite interface was investigated by theoretical calculation and energy dispersive spectrometer(EDS). Results show that the tensile strength(1,450 MPa), hardness(HRC 41-47) and impact toughness(94.7J·cm^(-2)) of bainitic steel were comparatively high, while its elongation was slightly low(4.0%). Tensile strength(1,100 MPa), hardness(>HRC 31) and elongation(7.72%) of the interface were also relatively high, but its impact toughness was low at 20.4 J·cm^(-2). Results of theoretical calculation of the element distribution in the interface region were basically consistent with that of EDS. Therefore, electroslag casting is a practical process to produce bimetallic composite material of bainitic steel and PD3 steel, and theoretical calculation also is a feasible method to study element distribution of their interface.
基金financially supported by the Guangdong Basic and Applied Basic Research Foundation(No.2019A1515110542)the Guangdong Special Support Program(No.2019BT02C629)+5 种基金the National Natural Science Foundation of China(Nos.52005189and 51775196)the Chinese Postdoctoral Science Foundation(No.2020M672617)the Guangzhou Science and Technology Society Project(Nos.X20200301015,201907010008,202007020008and 201807010030)the Chinese Central Universities Funds(No.2018ZD30)supported by Guangdong province Science and Technology Plan Projects(No.2019A1515011841)GDAS Projects(Nos.2020GDASYL-20200402005,2019GDASYL-0501009,2019GDASYL-0502006,2018GDASCX-0111,2018GDASCX-0402 and 2019GDASYL-0402004)。
文摘Additive manufacturing enables processing of functionally graded materials(FGMs)with flexible spatial design and high bonding strength.A steel-copper FGM with high interfacial strength was developed using laser powder bed fusion(LPBF).The effect of laser process parameters on interfacial defects was evaluated by X-ray tomography,which indicates a low porosity level of 0.042%therein.Gradient/fine dendritic grains in the interface are incited by high cooling rates,which facilitates interface strengthening.Multiple mechanical tests evaluate the bonding reliability of interface;and the fatigue tests further substantiate the ultrahigh bonding strength in FGMs,which is superior to traditional manufacturing methods.Mechanisms of the high interfacial bond strength were also discussed.
