A study of the effect of local scour on the flow field near the spur dike

The flow field near a spur dike such as down flow and horseshoe vortex system(HVS)are susceptible to the topographic changes in the local scouring process,resulting in variation of the sediment transport with time.In this study,large eddy simulations with fixed-bed at different scouring stages were conducted to investigate the changes in flow field.The results imply that the bed deformation leads to an increase in flow rate per unit area,which represent the capability of sediment transportation by water,in the scour hole.Moreover,the intensity of turbulent kinetic energy and bimodal motion near the sand bed induced by the HVS were also varied.However,the peak moments between the two sediment transport mechanisms were different.Hence,understanding the complex feedback mechanism between topography and flow field is essential for the local scour problem.

2.7-Ga-old mafic dike in the Trans-North China Orogen of the North China Craton and its tectonic significance

We studied an Archean mafic dike in the TransNorth China Orogen of the North China Craton, which has a magmatic age of 2701 ± 83 Ma and is currently the oldest mafic dike in the North China Craton. Such an old dike is extremely rare in the world. The presence of mafic dikes indicates that the North China Craton was in a tensional tectonic environment at 2.7 Ga. Geochemical characteristics reveal that this mafic dike belongs to continental tholeiitic basalt. Results from Hf isotope analysis reveal that the mafic dike originates from a depleted mantle. The plate assembly in the North China landmass was realized during the Archean era(2.7 Ga), and a thick and stable continental crust was formed. Therefore, the first cratonization of the North China Craton was completed before 2.7 Ga. The intrusion of the 2.7-Ga-old mafic dike from the deep lithospheric mantle of the continent indicates that the North China Craton has undergone a period of extensional tectonic activity. This event marks a significant extensional event that occurred after the cratonization of the North China Craton.

法律何以成为正义——从themis到dike

法律女神忒弥斯代表着西方最早的规范性思想,后来却逐渐为"正义"所取代。themis(法律)与dike(正义)本身有着深刻而密切的联系,由于都具有"审判"的涵义,二者逐渐合流,dike取代了themis而上升为社会生活的主导规范。在这个过程中,本来主要指"审判"的dike吸收了审判过程的"公正"要求,变成了一种伦理品质,即"正义"。dike继承并集成了themis的众多属性,其内涵从司法领域上升到伦理政治的高度,逐渐取代了神法themis。这充分证明,法律的本质就在于正义。

K-Ar Geochronology of Mesozoic Mafic Dikes in Shandong Province, Eastern China: Implications for Crustal Extension

Based on K-Ar isotope analyses, Mesozoic mafic (and alkali ultramafic) dikes from western and eastern Shandong Province, China, are dated at 88.2±1.70 Ma to 169.5±3.7 Ma with the majority of ages ranging from 90 Ma to 140 Ma. The emplacement of the dikes suggests a major Yanshanian (Cretaceous) crustal extension in Shandong province. Together with other available age data, this study suggests four periods of crustal extension at about 80 Ma, 100 Ma, 120 Ma and 140 Ma, respectively. Besides the effect of collapse of the Yanshanian orogenic belt on the emplacement of the mafic dikes in Shandong in the Cretaceous, the mantle plume and the extensive left-lateral advection and extension of the Tanlu fault also have controlled the crustal extension and the emplacement of the mafic dikes in eastern Shandong and western Shandong, respectively.

Geochemical Characteristics and Genesis of the Luxi-Xianrenzhang Diabase Dikes in Xiazhuang Uranium Orefield, Northern Guangdong Province

The Luxi-Xianrenzhang diabase dikes were emplaced into the eastern part of the Guidong composite granitoids in northern Guangdong Province at the end of the Early Cretaceous. They show tholeiitic features, enrichment in large ion lithophile elements, slight enrichment in light rare earth elements, depletion in Zr and Hf, and basically no depletion in Nb and Ta and no Eu anomaly. They are similar to intraplate basalt in terms of trace element characteristics. They have high εNd（t） values （3.6-4.9）, initial ^87Sr/^86Sr ratios （0.70530-70641） and δ^18O values and Dupal anomaly of Pb isotope compositions. Their Sr-Nd, Pb-Sr, Pb-Nd and Pb-Pb isotopes plot between DMM and EMII, with Pb similar to EMII, Nd relatively close to DMM and Sr in between. This profile suggests that the diabase dikes studied were derived from partial melting of a mantle source that had been subjected to metasomatism by fluids originated from a subduction zone under a tectonic environment of crustal extension and lithosphere thinning in the late Yanshanian.

Identification of Five Stages of Dike Swarms in the Shanxi-Hebei-Inner Mongolia Border Area and Its Tectonic Implications

Dike swarms are generally ascribed to intrusion of mantle-source magma result from extension. Basic dike swarms around the Shanxi-Hebei-Inner Mogolia borders in the northern peripheral area of the North China Craton can be divided into five age groups according to isotopic dating: 1800-1700 Ma, 800-700 Ma, 230 Ma, 140-120 Ma, and 50-40 Ma. Geological, petrological and isotope geochemical features of the five groups is investigated in order to explore the variation of the mantle material composition in the concerned area with time. And the various extensional activities reflected by the five groups of dike swarms are compared with some important tectonic events within the North China Craton as well as around the world during the same period.

Experiments and numerical simulations on transport of dissolved pollutants around spur dike

The flow field around a spur dike has three-dimensional characteristics. In order to analyze the influence of the flow field on pollutant transport, based on a compressive volume of fluid （VOF） scheme, the three-dimensional transient compressive pollutant transport model （CPTM） and the cubic equation （CE） bounded differencing scheme were developed. For the calibration and validation of CPTM, laboratory experiments were carried out in a flume with a non-submerged spur dike. The spur dike was angled at 60°, 90°, and 120° from the upstream direction. The simulation results agreed with the experimental results. The simulations and experiments showed that the distribution of pollutant concentration was determined by circumfluence and the main flow. Concentration decay in the circumfluenee zone was slower than that in the main flow. Downstream of the spur dike, the concentration fluctuation became intensive with the increase of spur dike angle.

Stability of the Guiding Dike in Yangtze Estuary Under the Wave Load

During the construction of the guiding dike in the Yangtze Estuary, some of the caisson structures sank into the soil for 1 -5 m or slid about 20 m away from the original place when a strong storm attacked this area. Dynamic triaxial tests were carried out to simulate the behavior of foundation soils under wave loading. The test results show that the excessive settlement and lateral movement of the caissons are due to the weakening of the soft clay strength during the strong storm. The test results also show that the ability of the soft clay to resist the wave force will be greatly increased when the soft soil samples are suitably improved. Based on the test results, an improvement method combining vertical drains with surcharge loading was proposed to strengthen the foundation soil. On the improved soil foundation, the dike has been reconstructed and undergone several strong storms without any damage. A finite element approach has been developed for analyzing the settlement and stability of the dike under the action of strong storm.

Minimum critical thickness of dike for ore-bearing fluid injection:A new approach applied to the Shihu gold deposit,Hebei Province,North China

According to the metallogenic theory by transmagmatic fluid （TMF）, one magmatic intrusion is a channel of ore-bearing fluids, but not their source. Therefore, it is possible to use TMF＇s ability for injection into and for escaping t^om the magmatic intrusion to evaluate its ore-forming potential. As the ore-bearing fluids cannot effectively inject into the magmatic intrusion when the magma fully crystal- lized, the cooling time and rates viscosity varied can be used to estimate the minimum critical thickness of the intrusion. One dimensional heat transfer model is used to determine the cooling time for three representative dikes of different composition （granite porphyry, quartz diorite and diabase） in the Shihu gold deposit. It also estimated the rates viscosity varied in these time interval. We took the thickness of dike at the intersection of the cooling time -- thickness curve and the rates viscosity varied versus thick- ness curve as the minimum critical thickness. For the ore-bearing fluids effectively injecting into the magma, the minimum critical thicknesses for the three representative dikes are 33.45 m for granite porphyry, 8.22 m for quartz diorite and 1.02 m for diabase, indicating that ore-bearing dikes must be thicker than each value. These results are consistent with the occurrence of ore bodies, and thus they could be applied in practice. Based on the statistical relationship between the length and the width of dikes, these critical thicknesses are used to compute critical areas： 0.0003--0.0016 km2 for diabase, 0.014--0.068 km2 for quartz diorite and 0.011-0.034 km2 for granite porphyry. This implies that ore- bearing minor intrusions have varied areas corresponding to their composition. The numerical simulation has provided the theoretical threshold of exposed thickness and area of the ore-bearing intrusion. These values can be used to determine the ore-forming potentials of dikes.

Ordovician Granitoids and Silurian Mafic Dikes in the Western Kunlun Orogen, Northwest China:Implications for Evolution of the Proto-Tethys

The western Kunlun orogen in the northwest Tibet Plateau is related to subduction and collision of Proto-and Paleo-Tethys from early Paleozoic to early Mesozoic. This paper presents new LA-ICPMS zircon U-Pb ages and Lu-Hf isotopes, whole-rock major and trace elements, and Sr–Nd isotopes of two Ordovician granitoid plutons(466–455 Ma) and their Silurian mafic dikes(～436 Ma) in the western Kunlun orogen. These granitoids show peraluminous high-K calcalkaline characteristics, with(^(87)Sr/^(86)Sr)_i value of 0.7129–0.7224, ε_(Nd)(t) values of -9.3 to -7.0 and zircon ε_(Hf)(t) values of -17.3 to -0.2, indicating that they were formed by partial melting of ancient lower-crust(metaigneous rocks mixed with metasedimentary rocks) with some mantle materials in response to subduction of the Proto-Tethyan Ocean and following collision. The Silurian mafic dikes were considered to have been derived from a low degree of partial melting of primary mafic magma. These mafic dikes show initial ^(87)Sr/^(86)Sr ratios of 0.7101–0.7152 and ε_(Nd)(t) values of -3.8 to -3.4 and zircon ε_(Hf)(t) values of -8.8 to -4.9, indicating that they were derived from enriched mantle in response to post-collisional slab break-off. Combined with regional geology, our new data provide valuable insight into late evolution of the Proto-Tethys.

Risk Analysis and Assessment of Overtopping Concerning Sea Dikes in the Case of Storm Surge

Risk analysis and assessment relating coastal structures has been one of the hot topics in the area of coastal protection recently. In this paper, from three aspects of joint return period of multiple loads, dike failure rate and dike continuous risk prevention respectively, three new risk analysis methods concerning overtopping of sea dikes are developed. It is worth noting that the factors of storm surge which leads to overtopping are also considered in the three methods. In order to verify and estimate the effectiveness and reliability of the newly developed methods, quantified mutual information is adopted. By means of case testing, it can be found that different prior variables might be selected dividedly, according to the requirement of special engineering application or the dominance of loads. Based on the selection of prior variables, the correlating risk analysis method can be successfully applied to practical engineering.

Influence of Spur Dike on Hydrodynamic Exchange Between Channel and Shoal of Generalization Estuary in Physical Model Test

Widely applied in maintaining estuarial waterway depth, the spur dike has played an important role in currents and sediment exchange between channel and shoal and sediment back-silting in the channel. Through establishing a generalized physical model at a bifurcated estuary and conducting current tests under the joint action of runoff and tide, the influence of the spur dike length on current exchange between channel and shoal is analyzed. Results show that when the spur dike length reaches a certain value, the direction of the flow velocity shear front between the channel and shoal will change. The longer the spur dike, the larger the transverse fluctuating velocity at the peak of flood in the channel shoal exchange area, while the transport of the transverse hydrodynamics is obvious in the process of flood. There is an optimum length of spur dike when the shear stress in the channel and the longitudinal velocity in flood and ebb reach the maximum, and the flow velocity will decrease when the spur dike length is smaller or larger than the optimum. For a certain length of spur dike, the larger the channel shoal elevation difference, the larger the peak longitudinal flow velocity in the middle of the navigation channel in flood and ebb. However, the transverse flow velocity will first decrease and then increase. The transverse transportation is obvious when the channel shoal elevation difference increases.

Validation of an operational forecasting system of sea dike risk in the southern Zhejiang Province, South China

In this study,an operational forecasting system of sea dike risk in the southern Zhejiang Province,South China was developed based on a coupled storm-surge and wave model.This forecasting system is important because of the high cost of storm-surge damage and the need for rapid emergency planning.A comparison with astronomical tides in 2016 and the validation of storm surges and high water marks of 20 typhoons verified that the forecast system has a good simulation ability.The system can forecast relatively realistic water levels and wave heights as shown under the parametric atmospheric forces simulated in a case study;the sea dikes in credible high risk were mainly located in the estuaries,rivers,and around the islands in the southern Zhejiang.Therefore,the forecast system is applicable in the southern Zhejiang with a support to the effective prevention from typhoon storm-surge damage.

Jurassic granitoid dike in Luodian, Guizhou Province: discovery and geological significance

In this paper, the Jurassic granitoid dike that intrudes into Permian diabase was reported in Luokun,Luodian County, south Guizhou. Zircon LA-ICP-MS U–Pb dating of the granitoid dike yielded an age of 164.3 ± 2.4 Ma with the e Hf(t) range from + 7.8 to + 12.1. The high contents of SiO_2(65.2%–66.8%) and total alkali(Na_2O + K_2O: 9.01%–9.95%), and low contents of Mg, Fe, Ca, P and Ti show the characteristics of alkali-rich granite. The total contents of rare earth elements range from 289.90 to 394.23 ppm. The Rb, Ba, K, Th, U and other LILE, Ta, Sr, P, Ti are enriched, and heavy rare earth elements are depleted. Petrogeochemical characteristics show that the dike was derived from a partial melting of newly-grown basaltic crust, and contaminated by crustal materials before experiencing strong fractional crystallization. The dike was formed in the intraplate post-orogenic extension stage and indicates that parental magma rose to the shallow crust through a fault. This provides new evidence of tectonic and mantle-crust magmatic activities and may contribute to regional Au mineralization in southern Guizhou and neighboring areas.

A Possible Mechanism to Thin Lithosphere of the North China Craton: Insights from Cretaceous Mafic Dikes in the Jiaodong Pensinsula

The North China Craton(NCC)is a classic case of the destruction of an ancient craton,in that it records the loss of more than 100 km of ancient refractory lithospheric mantle during the Mesozoic(e.g.,Menzies et al.,1993).This

LA-ICP-MS U-Pb Zircon Geochronology of Basic Dikes within Maxianshan Rock Group in the Central Qilian Orogenic Belt and Its Tectonic Implications

A large number of basic dikes, which indicate an important tectonic-magmatic event in the eastern part of the Central Qilian （祁连） orogenic belt, were found from Maxianshan （马衔山） rock group, Yongjing （永靖） county, Gansu （甘肃） Province, China. According to the research on the characteristics of geology and petrology, the basic dike swarms, widely intruded in Maxianshan rock group, are divided into two phases by the authors. U-Pb isotope of zircons from the basic dikes above two phases is separately determined by LA-ICP-MS in the Key Laboratory of Continental Dynamics of Northwest University, China and the causes of formation of the zircons are studied using CL images. The formation age of the earlier phase of metagabbro dikes is （441.1±1.4） Ma （corresponding to the early stage of Early Silurian）, and the age of the main metamorphic period is （414.3±1.2） Ma （corresponding to the early stage of Early Devonian）. The formation age of the later phase of diabase dike swarms is （434±1.0） Ma （corresponding to the late stage of Early Silurian）. The cap- tured-zircons from diabase dike swarms saved some information of material interfusion by Maxianshan rock group （^207pb/206pb apparent ages are （2 325±3）-（2 573 ±6） Ma）, and some zircons from diabase dike swarms also saved impacted information by tectonic thermal event during the late period of Caledonian movement （^206pb/^238U apparent ages are （400±2）-（429±2） Ma）. By combining the results of the related studies, the basic dikes within Maxianshan rock group were considered to be formed in the transfer period, from subductional orogeny towards collisional orogeny, which represents geological records of NW-SE extension during regional NE-SW towards intense compression in the Central Qilian block.

Simulation of flow pattern at rectangular lateral intake with different dike and submerged vane scenarios

A comprehensive understanding of the sediment behavior at the entrance of diversion channels requires complete knowledge of threedimensional(3 D) flow behavior around such structures. Dikes and submerged vanes are typical structures used to control sediment entrainment in the diversion channel. In this study, a 3 D computational fluid dynamic(CFD) code was calibrated with experimental data and used to evaluate flow patterns, the diversion ratio of discharge, the strength of secondary flow, and dimensions of the vortex inside the channel in various dike and submerged vane installation scenarios. Results show that the diversion ratio of discharge in the diversion channel is dependent on the width of the flow separation plate in the main channel. A dike perpendicular to the flow with a narrowing ratio of 0.20 doubles the ratio of diverted discharge in addition to reducing suspended sediment input to the basin, compared with a no-dike situation, by creating the outer arch conditions. A further increase in the narrowing ratio decreases the diverted discharge. In addition, increasing the longitudinal distance between consecutive vanes(Ls) increases the velocity gradient between the vanes and leads to a more severe erosion of the bed, near the vanes.

Numerical investigation of flow pattern and components of three-dimensional velocity around a submerged T-shaped spur dike in a 90° bend

Spur dike is one of the river training structures. This work presented a numerical simulation of flow field and three-dimensional velocity around a T-shaped spur dike located in bend using SSIIM model. The main objective of this work is to investigate the three-dimensional velocities and streamlines at transverse and longitudinal sections and plan views around the T-shaped spur dike in different submergence ratios(0, 5%, 15%, 25% and 50%). It is concluded that by increasing the submergence ratio from 5% to 50%, the maximum of scour is reduced; the maximum of longitudinal velocity increases by 7.7% and occurs at the water surface in spur dike axis. Near the bed, the maximum of vertical velocity occurs at the end of spur wing. By analyzing the streamlines at transverse sections, the followings were deduced for different submergence ratios: different dimensions and different positions of vortices around the spur dike.

Early Eocene leucocratic sill/dike swarms in the Gangdese belt, southern Tibet: Tectonic implications for Indo-Asian collision

The timing of the initial Indo-Asian collision is a subject of debate for a long time.Besides,the magmatic trace of the collisional process is also unclear.In the present study,the authors report Early Eocene leucocratic sill/dike swarms in the northern edge of the Nymo intrusive complex of the Gangdese belt,southern Tibet.The Nymo intrusive complex was emplaced at ca.50–47 Ma and surrounded by the metamorphosed Jurassic-aged Bima Formation volcano-sedimentary sequence along its northern side.At outcrops,the leucocratic sills/dikes intruded along or truncated the deformed foliations of the host Bima Formation,which has been subject to high-temperature amphibolite-facies metamorphism at ca.50–47 Ma.Detailed cathodoluminescence image analyses reveal that the zircon grains of the leucocratic sills/dikes have core-mantle textures.The cores yield the Jurassic ages comparable to the protolith ages of the Bima Formation.In contrast,the mantles of zircon grains yield weighted mean ages of ca.49–47 Ma,representing the crystallization timing of these leucocratic sills/dikes.The coeval ages for the Nymo intrusive complex,the high-temperature metamorphism,and the leucocratic sills/dikes indicate that a close relationship exists among them.The authors tentatively suggest that these leucocratic sills/dikes were generated from partial melting of the Jurassic-aged Bima Formation volcanic rocks,triggered by the high heat from the magma chamber of the Nymo intrusive complex.This Early Eocene tectono-thermal event of coeval magmatism,metamorphism and partial melting was most likely formed during the Indo-Asian collisional setting.

Design Methods for Geotextile Tubes Application in Dike Construction

The technique of geotextile tubes used to construct dikes for land reclamation has been widely used. The tubes are usually filled with slun＇y of soil, such as sand, silt or clay. The tensile stress developed in the geotextile during filling the tube is the dominant factor for construction of a safe dike. The existing design methods are good for designing sausage shaped tubes and can not be directly applied for designing fiat tubes, which are commonly used in dike construction. This paper presents a procedure that can detenmine the relatiorrship among the tube size, the pumping pressure, the unit weight of the slurry, and the tensile stress developed in the geotextile during the tube filing. When the tubes are piling up to form the dike, the tubes in the bottom will sustain the load from the weight of the upper ones. A procedure is also developed to calculate the changes of the mechanical and geometrical behavior of the tubes under the load with a similar method. All these approaches have been programmed, which can help dike designers to select the suitable geotextile and determine the profile of the dike.