Photo-induced Coupling Reaction of 1,1-Diphenyl-2,2-dicyanoethylene with 10-Methyl-9,10-dihydroacridine

Diphenyl-2, 2-dicyanoethylene reacts with 10-methyl-9, 10-dihydroacridine in deaerated acetonitrile under irradiation with l>320 nm to give the coupling product 1, 1-diphenyl-1-(10-methyl-9-acridinyl)-2, 2-dicyanoethane, which has been characterized by X-ray crystallographic, MS and NMR analyses.

The Modification of Diphenyl Sulfide to Pd/C Catalyst and Its Application in Selective Hydrogenation of p-Chloronitrobenzene

In this study, diphenyl sulfide(Ph2S) was employed to prepare a series of Ph2S-modified Pd/C catalysts(Pd–Ph2S/C). Catalyst characterization carried out by Brunner–Emmet–Teller(BET), energy dispersive spectrometer(EDS), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and CO chemisorption uptake measurements suggested a chemical interaction between Ph2 S and Pd. The ligand was preferably absorbed on the active site of Pd metal but after increasing the amount of Ph2 S, the adsorption of Ph2 S on Pd metal tended to be saturated and the excess of Ph2 S partially adsorbed on the activated carbon. A part of Pd atoms without adsorbing any Ph2 S still existed, even for the saturated Pd–Ph2S/C catalyst. The Pd–Ph2S/C catalysts exhibited a good selectivity of p-chloroaniline(p-CAN) in the hydrogenation of p-chloronitrobenzene(p-CNB). However,the chemisorption between Ph2 S and Pd was not so strong that part of Ph2 S was leached from Pd–Ph2S/C catalyst during the hydrogenation, which caused the decline of the selectivity of p-CAN over the used Pd–Ph2S/C catalyst.Resulfidation of the used Pd–Ph2S/C catalyst was effective to resume its stability, and the regenerated Pd–Ph2S/C catalyst could be reused for at least ten runs with a stable catalytic performance.

Ecotoxicological effects of mixed pollutants resulted from e-wastes recycling and bioaccumulation of polybrominated diphenyl ethers in Chinese loach(Misgurnus anguillicaudatus)

To understand potential ecotoxicological effects of electrical and electronic equipment waste （e-waste） recycling and polybrominated diphenyl ethers （PBDEs） bioaccumulation in loaches, a semi-field experiment using Chinese loach （Misgurnus anguiUicaudatus） as experimental fish was performed. Larval loaches were kept in net-cage for three months in an e-wastes recycling site and a reference site in Southeastern China. There was significant difference of the survival rate between the loaches from the e-wastes recycling site （27%, 19/70） and from reference site （70%, 49/70）. Histopathological responses were also found in all the livers examined in loaches from the e-wastes recycling site. These results showed that mixed pollutants resulted from e-wastes recycling led to ecotoxicological effects on loaches. The bioaccumulation of polybrominated diphenyl ethers （PBDEs）, the main pollutants in e-waste, in loaches was also studied, the mean concentration of total PBDEs in sediment was 6726.17 ng/g wet weight and in water samples was 4.08 ng/L （dissolved phase）. BDE 209 was the dominant congener in sediment and with relatively high concentration in water. Relatively low concentration of BDE 209 （less than 0.01% of total PBDEs） and high concentration of BDE47 （up to 39.34% of total PBDEs） were detected in loaches.

Molybdosphoric Acid Mixed with Titania Used as a Catalyst to Synthesize Diphenyl Carbonate via Transesterification of Dimethyl Carbonate and Phenol

The 12-molybdosphoric acid mixed with titania （MPA-TiO2） was found to be a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） via transesterification of dimethyl carbonate （DMC） and phenol. The X-ray diffraction （XRD） and infrared （IR） techniques were employed to characterize the prepared catalysts. The effect of the weight ratio of the 12-molybdosphoric acid to titania on the transesterification was investigated. A 13.1% yield of DPC and an 11.6% yield of methyl phenyl carbonate （MPC） were obtained over MPA-TiO2 with the weight ratio of MPA to TiO2 as 5：1.

Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalyst and Optimal Synthesis Conditions of the Support Prepared by Sol-gel Method

The support of catalyst for the direct synthesis of diphenyl carbonate （DPC） by heterogeneous catalytic reaction was prepared by the sol-gel method. Compared with activated charcoal, molecular sieve, porous ceramics, hopcalite, the support prepared by the sol-gel method has higher activity. The characterization of the support by X-ray diffraction （XRD） and transmission electron microscope （TEM） show that the mare crystal phase is Co2MnO4 and the average particle diameter is about 40 nm. The optimum conditions for synthesis of the support were determined by orthogonal experiments, which indicate that the proportion of Cu, Mn, and Co is the first important factor influencing the yield and selectivity of DPC. Temperature of calcination is the second one. The optimum conditions are： molar proportion of Cu, Mn, and Co being 1 ： 1 ： 1, temperature of calcination 700℃, drying at 100~C, temperature of water bath 85~C. The yield and selectivity of DPC in the process can reach 38% and 99% in the batch operation, respectively. The copper cobalt manganese mixed oxides chosen as the support contribute more to the high catalytic activity than the sol-gel method.

Study on Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalytic Reaction (V) Screening Catalysts and Optimizing Synthesis Conditions

Pd/LaxPbyMnOz, Pd/C, Pd/molecular sieve and Pd-heteropoly acid catalysts for direct synthesis of diphenyl carbonate (DPC) by heterogeneous catalytic reaction were compared and the results of DPC synthesis indicated that the catalyst Pd/LaxPbyMnOz had higher activity. The Pd/LaxPbyMnOz catalyst and the support was characterized by XRD, SEM and TEM, the main phase was Lao.szPbo.asMnOa and the average diameter could be about 25.4nm. The optimuna conditions for synthesis of DPC with Pd/LasPbyMnOz were determined by orthogonal experiments and the experimental results showed that reaction temperature was the first factor of effect on the selectivity and yield of DPC, and the concentration of O2 in gas phase also had significant effect on selectivity of DPC. The optimum reaction conditions were catalyst/phenol mass ratio l to 50, pressure 4.5MPa, volume concentration of O2 25%, reaction temperature 60℃ and reaction time 4 h. The maximum yield and average selectivity could reach 13% and 97% respectively in the batch operation.

Study on Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalytic Reaction (VI) Effect of Sn Loading Method and Content on Activity of Sn-Pd Supported Catalyst

The compound metal oxide LaxPbyMnzO used as support was prepared by the sol-gel method, and the catalyst in which Pd was used as active component and Sn as co-active component for direct synthesis of diphenyl carbonate (DPC) with heterogeneous catalytic reaction was obtained by co-calcination and precipitation respectively.The catalyst was characterized by XRD, SEM and TEM respectively. The specific surface area of catalysts was measured by ChemBET3000 instrument, and the activity of the catalysts was tested by the synthesis of DPC in a pressured reactor. The results showed that when the co-active component Sn was added by co-calcination method A, its loading content was equal to 14.43% and active component Pd was loaded by precipitation, the yield and selectivity of DPC could reach 26.78% and 99% respectively.

Investigation on the deactivation cause of lead-zinc double oxide for the synthesis of diphenyl carbonate by transesterification

The deactivation cause of lead-zinc double oxide for synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol has been investigated. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, infrared spectroscopy （IR）, thermogravimetry analysis （TG）, atomic absorption spectroscopy and elementary analysis are employed for the catalyst characterization. The results show that, the formation of Pb4O（OC6H5）6 through the reaction of phenol and lead species in the catalyst leads to the crystal phase change of active component and serious leaching of lead, which is the cause of the catalyst deactivation. In addition, the composition of the leached lead is ascertained to be a mixture of Pb4O（OC6H5）6 and PbO with the weight percentage of 62.7% and 37.3%, respectively.

Occurrence of polybrominated diphenyl ethers in fish and shellfish downstream from electronic-waste recycling plants

We measured 39 polybrominated diphenyl ethers （PBDEs） in the muscle tissue of three species of fish （Sciaenops ocellatus,Sparus macrocephalus,and Lateolabrax japonicus） and four species of shellfish （Tegillarca granosa,Cyclina sinensis,Sinonovacula constricta,and Ostrea cucullata） that were collected downstream of electronic-waste recycling plants in Taizhou,China.A total of 24 PBDE congeners （PBDE 24） in the samples were detected.The PBDE 24 （total PBDE） ranged from 545.4 to 1688.7 ng/kg ww （wet weight）.The mean PBDE 24 concentration was 1382.6 ng/kg ww in fish and 858.1 ng/kg ww in shellfish.The lower brominated congeners were detected at relatively high concentrations in all species.The penta-products,produced from e-waste,were found at relatively low levels.A principal component analysis suggested a significant correlation among di-,tri-,tetra-,and hepta-BDEs for the three species of fish.Similarly,we found a significant correlation between mono-and tri-BDEs in the shellfish.Our results suggested that the processes of PBDE metabolism and elimination were similar in both fish and shellfish.In addition,the primary source of PBDEs appeared to be from the debromination of high brominated PBDEs.

Identification of the metabolites of polybrominated diphenyl ether 99 and its related cytochrome P450s

Objective：To investigate the metabolites of polybrominated diphenyl ether 99（BDE-99）and its related cytochrome P450s in an in vitro system.Methods：Rat primary hepatocytes were isolated and treated with BDE-99 for 24-72 h.Metabolites were then extracted from the hepatocytes and media,and detected by GC/MS.Several mRNAs of metabolic enzymes were also extracted from the same cells and the gene expression levels were determined using quantitative real-time PCR.In addition,selected recombinant cytochrome P450s（CYPs） were expressed in a bacurovirus/sf9 system,and these were further used to explore the metabolism of BDE-99 in vitro.The parent depletion approach was used for screening the ability of CYPs to eliminate BDE-99.Results： A reductively debrominated metabolite,BDE-47,and three oxidative metabolites,2,4,5-tribromophenol,5-OH-BDE-47,and 5＇-OH-BDE-99,were identified from the BDE-99-treated rat hepatocytes,whereas no MeO metabolite was detected in the system.RT-PCR analysis showed that CYP 3A23/3A1,1A2,and 2B1/2 were induced by BDE-99.Furthermore,using the heterological expressed CYP proteins in in vitro BDE-99 metabolism experiments we found that CYP1A2 and CYP3A4 showed the highest metabolic efficiency for BDE-99,with the metabolic clearance rates of CYP1A2 and CYP3A4 being 30.3%and 27.7%,respectively.CYP1A1 and CYP2A6 displayed relatively low clearance rates,while CYP2E1 seemed not to be associated with the BDE-99 metabolism.Conclusions：In our in vitro rat primary hepatocyte metabolism system,four metabolites of BDE-99 were identified,and CYP3A4 and CYP1A2 were demonstrated to be involved in the BDE-99 metabolism.

Preparation of Diphenyl Oxalate from Transesterification of Dimethyl Oxalate with Phenol over TS-1 Catalyst

Diphenyl oxalate was synthesized from transesterification of dimethyl oxalate with phenol over TS-1 ( 2.5 wt% Ti ) catalyst. TS-1 catalyst, as a heterogeneous catalyst, showed excellent selectivity of diphenyl oxalate and methylphenyl oxalate compared with other homogeneous catalysts. Lewis acid sites on TS-1 catalyst were the active sites for transesterification of dimethyl oxalate with phenol. The high selectivity was closely related to the weak acid sites over TS-1.

Synthesis and Fluorescence Property of Eu^(3+), Tb^(3+) Perchlorate Complexes with Diphenyl Sulfoxide and 1,10-Phenanthroline

Two ternary complexes of RE(ClO_4)_3-DPSO-phen and two binary complexes of RE(ClO_4)_3-phen have been synthesized (RE=Eu, Tb; DPSO=diphenyl sulfoxide, phen=1,10-phenanthroline). Elemental analysis and TG-DTA studies suggest that the ternary complexes consist of RE(ClO_4)_3(DPSO)(phen)_3·nH_2O (n=1, 3) and binary complexes consist of RE(phen)_4(ClO_4)_3. IR spectra studies indicate that the DPSO ligand is bonded with RE(Ⅲ) through oxygen atom in sulfinyl group and phen ligand is bonded to RE(Ⅲ) through nitrogen atom. The molar conductivities measured in the acetonitrile solution indicate that two inorganic anions ClO_4^- are coordinated and binary complexes are nonelectrolyte. In the fluorescent spectra it was found that the fluorescence emission intensity of the ternary complexes more intensive than that of the binary complexes.

Preparation of CuO-CoO-MnO/SiO_2 Nanocomposite Aerogels as Catalyst Carriers and Their Application in the Synthesis of Diphenyl Carbonate

CuO-CoO-MnO/SiO2 nanocomposite aerogels were prepared by using tetraethyl orthosilicate （TEOS） as Si source, and aqueous solution of Cu, Co and Mn acetates as transition metal sources via sol-gel process and supercritical drying （SCD） technique. The effect of synthesis conditions on gelation was investigated. Moreover, the composition of the CuO-CoO-MnO/SiO2 nanocomposite aerogels was characterized by electron dispersive spectroscopy （EDS） and X-ray photoelectron spectroscopy （XPS）, and the specific surface area of the nanocomposite aerogels was determined by the Brunauer-Emmett-Teller （BET） method. Diphenyl carbonate （DPC） as the product was analyzed by gas chromatography （GC）. The experimental results show that the range of optimal temperature for gelation is 30-45 ℃, and the pH is 3.0-4.5. CuO-CoO-MnO/SiO2 nanocomposite aerogels are porous with a specific surface area of 384.9-700.6 m2/g. Compared to CO2 SCD, ethanol SCD is even favorable to the formation of aerogel with high specific surface area. The transition metals content in the nanocomposite aerogels can be controlled to be 0.71at%-13.77at%. With CuO-CoO-MnO/SiO2 nanocomposite aerogels as catalyst carrier, the yield of DPC is in direct proportion to the atomic fraction of transition metals in the nanocomposite aerogels, and it is up to 26.31 mass%, which is much higher than that via other porous carriers.

Synthesis of Diphenyl Carbonate over the Magnetic Catalysts Pd/La_(1-x)Pb_xMnO_3 (x=0.2-0.7)

The magnetic perovskite-supported palladium catalysts Pd/Lal_xPbxMnO3 （x = 0.2-0.7） were prepared and used for the oxidative carbonylation of phenol to diphenyl carbonate. The synthesized catalysts were characterized by the X-ray diffraction （XRD）, surface area measurement BET, vibration sample magnetometer （VSM） and tem- perature-programmed reduction （TPR）. The experimental results demonstrated that the magnetic Pd/La1-xPbxMnO3 （x = 0.4-0.5） obtain relative better catalytic activity. It can be explained by higher concentration of oxygen vacan- cies, larger amount and better mobility of lattice oxygen of their support. Furthermore, these samples possess suffi- cient saturated magnetization. Thus, Pd/La1-xPbxMnO3 （x = 0.4-0.5） may be suitable for operation in the magneti- cally stabilized bed reactor.

Determination of brominated diphenyl ethers in atmospheric particulate matter using selective pressurized liquid extraction and gas chromatography–mass spectrometry with a negative chemical ionization

This study describes the development and validation of a sensitive and reliable method for determination of polybrominated diphenyl ethers（PBDEs）in atmospheric particulate matter using selective pressurized liquid extraction（SPLE）and gas chromatography–mass spectrometry with a negative chemical ionization（GC-NCI-MS）.Extraction and clean-up were performed using PLE with 2 g florisil and 3 g silica placed in the extraction cells.Under optimal conditions,14 PBDEs were extracted at 70℃ using hexane/dichloromethane（50：50,v/v）as solvent.Validation of SPLE returned excellent recoveries for most analytes,with relative standard deviations mostly below20%.Method detection limits ranged from 0.13 to15.38 ng·mL^-1 for the GC-MS analyses.The method was successfully applied to atmospheric particulate matter of Beijing,where analytes were detected in the range of182.79 to 468.99 pg·m^-3.

Prediction of Aqueous Solubility for 209 Polychlorinated Diphenyl Ethers from Molecular Structural Parameters by DFT Method

Optimized calculations of 209 polychlorinated diphenyl ethers （PCDEs） and diphenyl ethers were carried out at the B3LYP/6-31G^＊ level with the Gaussian 98 program. Based on the theoretical linear solvation energy relationship （TLSER） model, the obtained structural parameters were taken as theoretical descriptors to establish the novel QSPR model for predicting aqueous solubility （-lgSw） of PCDEs. The model obtained in this work contains two variables： mean molecular polarizability （a） and the most positive partial charge on a hydrogen atom （qH^＋）, of which RE = 0.9606 and SD = 0.32. And the results of cross-validation test also show that the model exhibits optimum stability and better predictive power. Moreover, the predictive power of the new model is better than that of MCIs method.

Predicting the Relative Retention Time (RRT) of Polybrominated Diphenyl Ethers (PBDEs)

Using the molecular electronegativity distance vector descriptors derived directly from the molecular topological structures, the relative retention time （RRT） of polybrominated diphenyl ethers （PBDEs） were predicted. A four-variable regression model （M30） with the correlation coefficient of 0.9816 and the root mean square errors of 0.061 was developed using a training set including 30 PBDEs. The correlation coefficient of 0.9841 and the root mean square errors of 0.054 between the values of RRT predicted by M30 and the RRT observed for 16 external PBDEs show a good predictive potential of M30. The descriptors included in the M30 represent four interactions between four pairs of atom types, i.e., atom -C= and -C=, -C= and 〉C=, 〉C= and 〉C=, -C= and -Br.

Synthesis of methyl N-phenyl carbamate from dimethyl carbonate and 1,3-diphenyl urea under mild conditions

Synthesis of methyl N-phenyl carbamate from dimethyl carbonate and 1,3-diphenyl urea was investigated under atmospheric pressure. The results showed that homogenous catalyst sodium methoxide had the excellent activity to efficiently catalyze the synthesis of methyl N-phenyl carbamate under atmospheric pressure.

A study on hydrogen uptake and release of a eutectic mixture of biphenyl and diphenyl ether

Hydrogen storage in Liquid Organic Hydrogen Carrier(LOHC)systems is appealing for the safe storage and distribution of excess renewable energy via existing gasoline infrastructures to end-users.We present the eutectic mixture of biphenyl and diphenyl ether of its first use as a LOHC material.The material is hydrogenated with 99%selectivity without the cleavage of C–O bond,with commercial heterogeneous catalysts,which is confirmed by nuclear magnetic spectroscopy and gas chromatography-mass spectrometry.Equilibrium concentration,dehydrogenation enthalpy,and thermo-neutral temperature are calculated using a density functional theory.The results indicate that O-atom-containing material exhibits more favorable dehydrogenation thermodynamics than that of the hydrocarbon analogue.The H2-rich material contains6.8 wt%of gravimetric hydrogen storage capacity.A preliminary study of catalytic dehydrogenation on a continuous reactor is presented to demonstrate a reversibility of this material.

Kinetic model of transesterification of diphenyl carbonate and 1,4-butyldiol

The transesterification of diphenyl carbonate （DPC） with 1,4-butyldiol （BD） was kinetically investigated in the presence of lithium acetate catalyst at 465 K.The reaction was followed by the measurement of the quantity of phenol which was distilled from the reactor.The experiments supported the assumption that the phenyl ester groups in DPC and phenyl hdroxybutyl carbonate （PHBH） had the same reactivity,and the transesterification obeyed first-order kinetics with respect to DPC and BD,and a rate equation was derived.The reaction rate was found to be first order with respect to the catalyst concentration as well.When those data were incorporated in the rate equation,excellent agreement between calculated values and the observed ones was recognized over a wide range.