Demolition technique of high thin-wall hyperbolic reinforced concrete cool tower by directional controlled blasting

Based on blasting demolition of high thin-wall hyperbolic reinforced concrete cool tower, by virtue of engineering practice of blasting the tube concrete structures, the analysis and research were made on the mechanism of cool tower collapse through selecting blasting parameters and selecting gap form, gap size and gap angle. The cool tower was twisted, collapsed directionally and broken well according to the design requirements. The expected results and purposes of blasting were obtained with no back blow, total blasted pile approximates to 4 - 5 m, no occurrence of flying stones and no damage to fixed buildings and equipment, the large-sized hyperbolic thin-wall reinforced concrete cool towers are twisted during blasting and it collapses well with good breaking. The test and measurement of blasting vibrating velocity was carried out during blasting and the measuring results are much less than critical values specified by Safety Regulations for Blasting. The study shows that gap form, gap size and gap angle are the key factors to cool tower collapse and will give beneficial references to related theoretical study and field application.

Study on linear shaped charge in penetrating rock

Based on the action mechanism of linear shaped charge（ LSC ）, penetration performance of LSC on rock was studied. The optimal standoff and the vertex angle of LSC were studied and determined by lab experiments. Through cutting sand-cement grout samples, the spacing interval of boreholes can approach 17.5 times of the bore-hole＇ s diameter, and the result of the directional expansion of crack is satisfactory. The result of field experiment indicates cutting effect is very good, the ruggedness in fracture plane is less than 50 mm, the rate of half-hole marks is nearly 100 % , and the crack inspection shows that there is no damage in the internal of the cutting part. All these suggest that the orientation fracture blasting with LSC is a good means in directional fracture controlled blasting and is worth popularizing widely.

Rejection of Direct Blast Interference Based on Signal Phase-Matching Array Processing

In bistaic acoustic testing, there will be strong direct blast interference. An algorithm based on signal phase-matching array processing that rejects direct blast interference in bistatic acoustic testing has been studied, through which the object scattering signal is accurately extracted. Characteristics of bistatic acoustic testing and signal phase matching processing principle are fully integrated in this algorithm. Firstly, the direct blast interference is calculated from the receiving signal based on three subarrays signal phase matching processing. Secondly, the direct blast is rejected by subtraction from the receiving signal. In this way the limitations of the high signal to noise ratio that signal phase matching processing required for direct calculating the object scattering signal can be avoided. Simulation and sea trial results show that, when the ratio of signal to interference is greater than -20 dB, this algorithm of direct blast interference rejection based phase matching signal processing can accurately extract the object scattering signal.

Application of the direct blast adaptive suppression method to the forward scattered broadband signals

The basic principles of target detection by forward acoustic scattering are presented.A direct blast suppression approach based on adaptive filtering(DBS-AF) is proposed to suppress the direct blast.The DBS-AF technique is extended to the linear frequency modulation(LFM) signal,where the envelope of the signal is regarded as a 'general waveform' and imported into the adaptive filter.Application of the DBS-AF method to the data collected from a lake trial yields an output detection curve,in which the direct blast is mapped to the background while the acoustic field aberration is represented by the peak value fluctuation.The inhibitory effect in single hydrophone is approximately- 5 dB,and is then enhanced by exploiting the mean value removal approach as a preprocessing technique.The direct blast is further suppressed to a level of-10 dB by making full use of multichannel receptions.The main factors affecting the algorithm performance are as follows:the fluctuation degree of the receptions during the weighting vector training period and the power ratio of the forward scattered wave to the direct blast when the target is present.