By etching a second-order grating directly into the Al-free optical waveguide region of a ridgewaveguide（RW） AlGaInAs/AlGaAs distributed feedback（DFB） laser diode,a front facet output power of 30mW is obtained at ...By etching a second-order grating directly into the Al-free optical waveguide region of a ridgewaveguide（RW） AlGaInAs/AlGaAs distributed feedback（DFB） laser diode,a front facet output power of 30mW is obtained at about 820nm with a single longitudinal mode. The Al-free grating surface permits the re-growth of a high-quality cladding layer that yields excellent device performance. The threshold current of these laser diodes is 57mA,and the slope efficiency is about 0.32mW/mA.展开更多
Usually GaAs/AlGaAs is utilized as an active layer material in laser diodes operating in the spectral range of 800- 850 nm. In this work, in addition to a traditional unstrained GaAs/AlGaAs distributed feedback （DFB...Usually GaAs/AlGaAs is utilized as an active layer material in laser diodes operating in the spectral range of 800- 850 nm. In this work, in addition to a traditional unstrained GaAs/AlGaAs distributed feedback （DFB） laser diode, a compressively strained InGaAlAs/AlGaAs DFB laser diode is numerically investigated in characteristic. The simulation results show that the compressively strained DFB laser diode has a lower transparency carrier density, higher gain, lower Auger recombination rate, and higher stimulated recombination rate, which lead to better a device performance, than the traditional unstrained GaAs/AlGaAs DFB laser diode.展开更多
Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modu...Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modulation.In integrated EML,the microwave interaction between the distributed feedback laser diode(DFB-LD)and the electro-absorption modulator(EAM)has a nonnegligible influence on the modulation performance,especially at the high-frequency region.In this paper,integrated EML was investigated as a three-port network with two electrical inputs and a single optical output,where the scattering matrix of the integrated device was theoretically deduced and experimentally measured.Based on the theoretical model and the measured data,the microwave equivalent circuit model of the integrated device was established,from which the microwave interaction between DFB-LD and EAM was successfully extracted.The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling.The electrical isolation is bidirectional while the optical coupling is directional,which aggravates the microwave interaction in the direction from DFB-LD to EAM.展开更多
We report a type-I Ga Sb-based laterally coupled distributed-feedback（LC-DFB） laser with shallow-etched gratings operating a continuous wave at room temperature without re-growth process. Second-order Bragg gratings...We report a type-I Ga Sb-based laterally coupled distributed-feedback（LC-DFB） laser with shallow-etched gratings operating a continuous wave at room temperature without re-growth process. Second-order Bragg gratings are fabricated alongside the ridge waveguide by interference lithography. Index-coupled LC-DFB laser with a cavity of 1500 μm achieves single longitudinal mode continuous-wave operation at 20℃ with side mode suppression ratio（SMSR） as high as 24 dB.The maximum single mode continuous-wave output power is about 10 mW at room temperature（uncoated facet）. A low threshold current density of 230 A/cm^2 is achieved with differential quantum efficiency estimated to be 93 mW/A. The laser shows a good wavelength stability against drive current and working temperature.展开更多
Wavelength-tunable organic semiconductor lasers based on mechanically stretchable polydimethylsiloxane (PDMS) gratings were developed. The intrinsic stretchability of PDMS was explored to modulate the period of the di...Wavelength-tunable organic semiconductor lasers based on mechanically stretchable polydimethylsiloxane (PDMS) gratings were developed. The intrinsic stretchability of PDMS was explored to modulate the period of the distributed feedback gratings for fine tuning the lasing wavelength. Notably, elastic lasers based on three typical light-emitting molecules show com-parable lasing threshold values analogous to rigid devices and a continuous wavelength tunability of about 10 nm by mechanic-al stretching. In addition, the stretchability provides a simple solution for dynamically tuning the lasing wavelength in a spec-tral range that is challenging to achieve for inorganic counterparts. Our work has provided a simple and efficient method of fab-ricating tunable organic lasers that depend on stretchable distributed feedback gratings, demonstrating a significant step in the advancement of flexible organic optoelectronic devices.展开更多
A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when...A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.展开更多
We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the thre...We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.展开更多
Modulation bandwidth enhancement in a directly modulated two-section distributed feedback(TS-DFB)laser based on a detuned loading effect is investigated and experimentally demonstrated.The results show that the 3-dB b...Modulation bandwidth enhancement in a directly modulated two-section distributed feedback(TS-DFB)laser based on a detuned loading effect is investigated and experimentally demonstrated.The results show that the 3-dB bandwidth of the TS-DFB laser is increased to 17.6 GHz and that chirp parameter can be reduced to 2.24.Compared to the absence of a detuned loading effect,there is a 4.6 GHz increase and a 2.45 reduction,respectively.After transmitting a 10 Gb/s non-return-to-zero(NRZ)signal through a 5-km fiber,the modulation eye diagram still achieves a large opening.Eight-channel laser arrays with precise wavelength spacing are fabricated.Each TS-DFB laser in the array has side mode suppression ratios(SMSR)>49.093 dB and the maximum wavelength residual<0.316 nm.展开更多
光栅结构的设计和制作直接决定了分布反馈（DFB）半导体激光器光电特性的优劣。采用传输矩阵法模拟了不同光栅耦合因子下随机相位对均匀光栅DFB芯片特性的影响,获得了芯片的光电参数分布。通过分析耦合因子对芯片光电参数分布的影响,提...光栅结构的设计和制作直接决定了分布反馈（DFB）半导体激光器光电特性的优劣。采用传输矩阵法模拟了不同光栅耦合因子下随机相位对均匀光栅DFB芯片特性的影响,获得了芯片的光电参数分布。通过分析耦合因子对芯片光电参数分布的影响,提高了DFB芯片的成品率。设计并制备了基于Al Ga In As材料体系的脊波导DFB激光器,最终使芯片双峰比例仅为7.7%、成品率达到60%。对合格品在-40~105℃下的P-I特性和在-40~85℃下的光谱进行了测试,结果表明芯片性能优良,芯片远场发散角为25°和21°。芯片的小信号频带响应和眼图测试结果表明芯片完全满足2.5 Gbit/s的应用要求。展开更多
A 1.3 μm distributed feedback(DFB) semiconductor laser with equivalent λ/4 phase shift based on reconstruction equivalent chirp(REC) technique is numerically studied and experimentally demonstrated.The simulation re...A 1.3 μm distributed feedback(DFB) semiconductor laser with equivalent λ/4 phase shift based on reconstruction equivalent chirp(REC) technique is numerically studied and experimentally demonstrated.The simulation results show that the 1.3 μm DFB laser with equivalent λ/4 phase shift based on the REC technique performs the same as that of actual λ/4 phase shift DFB laser,with nearly the same P-I curves,the internal power distributions and the output ASE spectra.Compared with the traditional λ/4 phase shift DFB laser,the REC based laser only changes the sampling structures with the uniform seed waveguide grating instead of the actual grating structures.As a result,the fabrication of such laser will be very easy.In this paper,we successfully fabricated the 1.3 μm DFB laser based on the REC technique for the first time to the best of our knowledge.展开更多
The second-order Bragg grating structure of an 808 nm distributed feedback semiconductor laser diode was designed and optimized. The grating with a period of 240 nm was fabricated on GaAs substrate by holographic phot...The second-order Bragg grating structure of an 808 nm distributed feedback semiconductor laser diode was designed and optimized. The grating with a period of 240 nm was fabricated on GaAs substrate by holographic photolithography and wet etching. Images of optical microscopy, scanning electron microscopy and atomic force microscopy show that the grating has a period of 240 nm, duty cycle of 0.25, depth of 80 nm, with perfect surface morphology, good fringe continuity and uniformity.展开更多
文摘By etching a second-order grating directly into the Al-free optical waveguide region of a ridgewaveguide（RW） AlGaInAs/AlGaAs distributed feedback（DFB） laser diode,a front facet output power of 30mW is obtained at about 820nm with a single longitudinal mode. The Al-free grating surface permits the re-growth of a high-quality cladding layer that yields excellent device performance. The threshold current of these laser diodes is 57mA,and the slope efficiency is about 0.32mW/mA.
基金Project supported by the National Natural Science Foundation of China （Grant No 10374085）. Acknowledgment The authors would like to thank the members of the nano-opotoelectronics laboratory for helpful discussion.
文摘Usually GaAs/AlGaAs is utilized as an active layer material in laser diodes operating in the spectral range of 800- 850 nm. In this work, in addition to a traditional unstrained GaAs/AlGaAs distributed feedback （DFB） laser diode, a compressively strained InGaAlAs/AlGaAs DFB laser diode is numerically investigated in characteristic. The simulation results show that the compressively strained DFB laser diode has a lower transparency carrier density, higher gain, lower Auger recombination rate, and higher stimulated recombination rate, which lead to better a device performance, than the traditional unstrained GaAs/AlGaAs DFB laser diode.
基金This work was supported by the National Key Research and Development Program of China under Grant No.2018YFE0201900the National Natural Science Foundation of China under Grants No.61927821 and No.61875240the Joint Research Fund of Ministry of Education of China under Grant No.6141A02022436.
文摘Integrated electro-absorption-modulated distributed feedback laser diodes(EMLs)are attracting much interest in optical communications for the advantages of a compact structure,low power consumption,and high-speed modulation.In integrated EML,the microwave interaction between the distributed feedback laser diode(DFB-LD)and the electro-absorption modulator(EAM)has a nonnegligible influence on the modulation performance,especially at the high-frequency region.In this paper,integrated EML was investigated as a three-port network with two electrical inputs and a single optical output,where the scattering matrix of the integrated device was theoretically deduced and experimentally measured.Based on the theoretical model and the measured data,the microwave equivalent circuit model of the integrated device was established,from which the microwave interaction between DFB-LD and EAM was successfully extracted.The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling.The electrical isolation is bidirectional while the optical coupling is directional,which aggravates the microwave interaction in the direction from DFB-LD to EAM.
基金Project supported by the National Key Basic Research Program of China(Grant Nos.2014CB643903 and 2013CB932904)the National Special Funds for the Development of Major Research Equipment and Instruments,China(Grant No.2012YQ140005)+1 种基金the National Natural Science Foundation of China(Grant Nos.61435012,61274013,61306088,and 61290303)the Strategic Priority Research Program(B)of the Chinese Academy of Sciences(Grant No.XDB01010200)
文摘We report a type-I Ga Sb-based laterally coupled distributed-feedback（LC-DFB） laser with shallow-etched gratings operating a continuous wave at room temperature without re-growth process. Second-order Bragg gratings are fabricated alongside the ridge waveguide by interference lithography. Index-coupled LC-DFB laser with a cavity of 1500 μm achieves single longitudinal mode continuous-wave operation at 20℃ with side mode suppression ratio（SMSR） as high as 24 dB.The maximum single mode continuous-wave output power is about 10 mW at room temperature（uncoated facet）. A low threshold current density of 230 A/cm^2 is achieved with differential quantum efficiency estimated to be 93 mW/A. The laser shows a good wavelength stability against drive current and working temperature.
基金financial support from the National Natural Science Foundation of China (21835003, 91833304,21422402, 62274097, 21674050, 62004106)the National Key Basic Research Program of China (2014CB648300,2017YFB0404501)+11 种基金the Natural Science Foundation of Jiangsu Province (BE2019120, BK20160888)Program for Jiangsu Specially-Appointed Professor (RK030STP15001)the Six Talent Peaks Project of Jiangsu Province (TD-XCL-009)the333 Project of Jiangsu Province (BRA2017402)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China (20KJB140005)China Postdoctoral Science Foundation (2020M671553)the NUPT"1311 Project"and Scientific Foundation (NY217169, NY215062, NY215107,NY217087)the Leading Talent of Technological Innovation of National Ten-Thousands Talents Program of Chinathe Excellent Scientific and Technological Innovative Teams of Jiangsu Higher Education Institutions (TJ217038)the Postgraduate Research&Practice Innovation Program of Jiangsu Province (SJCX21-0297)the Synergetic Innovation Center for Organic Electronics and Information Displaysthe Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘Wavelength-tunable organic semiconductor lasers based on mechanically stretchable polydimethylsiloxane (PDMS) gratings were developed. The intrinsic stretchability of PDMS was explored to modulate the period of the distributed feedback gratings for fine tuning the lasing wavelength. Notably, elastic lasers based on three typical light-emitting molecules show com-parable lasing threshold values analogous to rigid devices and a continuous wavelength tunability of about 10 nm by mechanic-al stretching. In addition, the stretchability provides a simple solution for dynamically tuning the lasing wavelength in a spec-tral range that is challenging to achieve for inorganic counterparts. Our work has provided a simple and efficient method of fab-ricating tunable organic lasers that depend on stretchable distributed feedback gratings, demonstrating a significant step in the advancement of flexible organic optoelectronic devices.
基金Supported by the National High-Technology Research and Development Program of China under Grant Nos 2011AA010303and 2012AA012203the National Basic Research Program of China under Grant No 2011CB301702the National Natural Science Foundation of China under Grant Nos 61321063 and 6132010601
文摘A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.
基金Supported by the National Basic Research Program of China under Grant Nos 2013CB632801 and 2013CB632803the National Natural Science Foundation of China under Grant Nos 61435014,61306058 and 61274094the Beijing Natural Science Foundation under Grant No 4144086
文摘We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.
文摘Modulation bandwidth enhancement in a directly modulated two-section distributed feedback(TS-DFB)laser based on a detuned loading effect is investigated and experimentally demonstrated.The results show that the 3-dB bandwidth of the TS-DFB laser is increased to 17.6 GHz and that chirp parameter can be reduced to 2.24.Compared to the absence of a detuned loading effect,there is a 4.6 GHz increase and a 2.45 reduction,respectively.After transmitting a 10 Gb/s non-return-to-zero(NRZ)signal through a 5-km fiber,the modulation eye diagram still achieves a large opening.Eight-channel laser arrays with precise wavelength spacing are fabricated.Each TS-DFB laser in the array has side mode suppression ratios(SMSR)>49.093 dB and the maximum wavelength residual<0.316 nm.
文摘光栅结构的设计和制作直接决定了分布反馈（DFB）半导体激光器光电特性的优劣。采用传输矩阵法模拟了不同光栅耦合因子下随机相位对均匀光栅DFB芯片特性的影响,获得了芯片的光电参数分布。通过分析耦合因子对芯片光电参数分布的影响,提高了DFB芯片的成品率。设计并制备了基于Al Ga In As材料体系的脊波导DFB激光器,最终使芯片双峰比例仅为7.7%、成品率达到60%。对合格品在-40~105℃下的P-I特性和在-40~85℃下的光谱进行了测试,结果表明芯片性能优良,芯片远场发散角为25°和21°。芯片的小信号频带响应和眼图测试结果表明芯片完全满足2.5 Gbit/s的应用要求。
文摘A 1.3 μm distributed feedback(DFB) semiconductor laser with equivalent λ/4 phase shift based on reconstruction equivalent chirp(REC) technique is numerically studied and experimentally demonstrated.The simulation results show that the 1.3 μm DFB laser with equivalent λ/4 phase shift based on the REC technique performs the same as that of actual λ/4 phase shift DFB laser,with nearly the same P-I curves,the internal power distributions and the output ASE spectra.Compared with the traditional λ/4 phase shift DFB laser,the REC based laser only changes the sampling structures with the uniform seed waveguide grating instead of the actual grating structures.As a result,the fabrication of such laser will be very easy.In this paper,we successfully fabricated the 1.3 μm DFB laser based on the REC technique for the first time to the best of our knowledge.
基金Project supported by the National Natural Science Foundation of China(No.11474036)the National Key Lab of High Power Semiconductor Lasers Foundations(No.9140C310103120C3101)
文摘The second-order Bragg grating structure of an 808 nm distributed feedback semiconductor laser diode was designed and optimized. The grating with a period of 240 nm was fabricated on GaAs substrate by holographic photolithography and wet etching. Images of optical microscopy, scanning electron microscopy and atomic force microscopy show that the grating has a period of 240 nm, duty cycle of 0.25, depth of 80 nm, with perfect surface morphology, good fringe continuity and uniformity.
