Modeling Boundary and Edge Effect of Chloride Diffusion for Durability Design of Concrete Structures Exposed in Marine Environment

According to the Fick＇s second law of diffusion, six analytical solutions of chloride profile in concrete were studied and discussed with regard to different boundary and initial conditions. In those analytical solutions, the most prevailing error-function solution which is based on semi-infinite assumption is the simple one, but may under-estimate the chloride content in concrete and over-rate the life time prediction of concrete structures. The experimental results show that compared with other solutions, the chloride content in concrete predicted by error-function model is the minimum, and the calculation difference produced by different analytical models should not be ignored. The influence of models on chloride content prediction is more than other environment and material coefficients in some time. In order to get a more realistic prediction model, modification to error-function model is suggested based on analysis and calculation examples concerning the boundary and edge effect.

Durability related environmental zonation and design methodology for marine RC structures

A reliability-based quantitative durability design methodology is presented for reinforced concrete(RC)structures in the marine environment on the basis of natural exposure data derived from four berths(1.5,1.5,4 and 15 years)of a concrete port.More than 200 chloride profiles are obtained and analyzed.The relationship between nominal surface chloride ion concentration and altitude is discussed.Subsequently,the formula of the apparent chloride diffusion coefficient is proposed with consideration of the surrounding temperature,sodium chloride solution concentration,age factor and altitude.Then,the reliability-based method to predict the durability of RC structures is developed according to Fick s second law.Relationships between the predicted penetration depth of the chloride ion,the ratio of the wetting time per-period and the corresponding altitude are discussed.Subsequently,the environmental zonation methodology is established for concrete structures under a marine chloride environment by considering the ratio of the wetting time per-period of concrete as the zoning index.Finally,the corres-ponding durability design method for each zone level is established,which contains the durability design regulations of the specimen,and correction coefficients for different water/binder ratios,ages,temperatures and chloride ion concentrations.

A Simple Mix Proportion Design Method Based on Frost Durability for Recycled High Performance Concrete Using Fully Coarse Recycled Aggregate

Durability design of recycled high performance concrete（RHPC） is fundamental for improving the use rate and level of concrete waste as coarse recycled aggregate（CRA）. We discussed a frostdurability-based mix proportion design method for RHPC using 100 % CRA and natural sand. Five groups of RHPC mixes with five strength grades（40, 50, 60, 70 and 80 MPa） were produced using CRA with four quality classes, and their workability, 28 d compressive strengths and frost resistances（measured by the compressive strength loss ratio and the relative dynamic modulus of elasticity） were tested. Relationships between the 28 d compressive strength, the frost resistance and the CRA quality characteristic parameter, water absorption, were then developed. The criterion of a CRA maximum water absorption limit value for RHPC was suggested, independent of its source and quality class. The results show that all RHPC mixes achieve the expected target workability, strength, and frost durability. The research results demonstrate that the application of the proposed method does not require trial testing prior to use.

Durability problems of lining structures for Xiamen Xiang'an subsea tunnel in China

Durability problem of reinforced concrete for underground structures is a hot issue in the field of structural engineering. For underground structures, the prediction of structural service life and methodology for durability design are needed to estimate structural durability. Taking the case of Xiamen Xiang＇an subsea tunnel as background, which is designed to meet the requirement of lO0-year service life, the influential factors on tunnel lining durability are analyzed. Under the criteria of crack controlling and bearing capacity of linin~ structures, the theoretical service life of Xiamen Xiang＇an subsea tunnel lining is studied. The regulations, which are needed for the diffusion capability of chloride ions in concrete by the relevant diffusion tests, are proposed. After a quick corrosion test, the bearing capacity test on eccentric short columns is implemented to investigate the variation rules in the bearing capacity of models with time. Influence of the corrosion degree of steel bars on the bearing capacity of models is also investigated. Based on the results of model tests, the acceleration ratio between the quick corrosion in laboratory test and the natural corrosion environments is established. Thus, the natural service life of subsea tunnel lining structures can be obtained by means of laboratory tests. Then, the proposed method using this modified model is employed to predict the service life of tunnel lining structures. Finally, the design and construction measures for improving the durability of lining structures of subsea tunnel are introduced. The proposed method in the present study based on a real engineering project is superior to those with only theoretical assumptions, and would be more suitable for similar projects.