A novel molybdenite depressant for efficient selective flotation separation of chalcopyrite and molybdenite

A novel small molecule depressant(M-DEP)was used to separate chalcopyrite and molybdenite via flotation.The results showed that M-DEP had an excellent selective depression on molybdenite,while had little effect on the flotation of chalcopyrite.The adsorption capacity of M-DEP on the surface of molybdenite was greater than that on chalcopyrite surface.The adsorption of M-DEP reduced the floatability of molybdenite and had less effect on the floatability of chalcopyrite,which was due to its different adsorption modes on the surface of the two minerals.Furthermore,the interaction between chalcopyrite and M-DEP was mainly chemical interaction,and almost all of the adsorbed M-DEP molecules were removed and replaced by sodium butyl xanthate(SBX).By contrast,hydrophobic interaction was the main way in which M-DEP was adsorbed on the molybdenite surface with little chemical interaction,which was less interfered by SBX addition.Therefore,M-DEP had a super selective depression on molybdenite.The study provided a novel depressant and approach for the deep separation of chalcopyrite and molybdenite via flotation.

Role of tannin pretreatment in flotation separation of magnesite and dolomite

Flotation separation of magnesite and its calcium-containing carbonate minerals is a difficult problem.Recently,new regulat-ors have been proposed for magnesite flotation decalcification,although traditional regulators such as tannin,water glass,sodium carbon-ate,and sodium hexametaphosphate are more widely used in industry.However,they are rarely used as the main regulators in research because they perform poorly in magnesite and dolomite single-mineral flotation tests.Inspired by the limonite presedimentation method and the addition of a regulator to magnesite slurry mixing,we used a tannin pretreatment method for separating magnesite and dolomite.Microflotation experiments confirmed that the tannin pretreatment method selectively and largely reduces the flotation recovery rate of dolomite without affecting the flotation recovery rate of magnesite.Moreover,the contact angles of the tannin-pretreated magnesite and dolomite increased and decreased,respectively,in the presence of NaOl.Zeta potential and Fourier transform infrared analyses showed that the tannin pretreatment method efficiently hinders NaOl adsorption on the dolomite surface but does not affect NaOl adsorption on the magnesite surface.X-ray photoelectron spectroscopy and density functional theory calculations confirmed that tannin interacts more strongly with dolomite than with magnesite.

A novel surfactant N-hydroxy-9,10-epoxy group-octadecanamide:Part II.Its synthesis and application in flotation separation of spodumene and albite

A novel hydroxamic acid,N-hydroxy-9,10-epoxy group-octadecanamide(N-OH-9,10-O-ODA),was synthesised by modifying the structure of oleic acid.The carboxyl group of oleic acid was converted into an N-hydroxy amide group,and an epoxy group was introduced into its structure.N-OH-9,10-O-ODA was used as a novel collector in the flotation separation of spodumene from one of its associated gangue minerals,specifically albite.N-OH-9,10-O-ODA exhibits remarkable selectivity,with a stronger affinity for collecting spodumene particles compared to albite particles.Zeta potential measurements and X-ray photoelectron spectroscopic analysis reveal that the adsorption quantity of N-OH-9,10-O-ODA on spodumene surface is comparable to that on albite surface.First-principles calculations demonstrate the diverse adsorption configurations of N-OH-9,10-O-ODA on surfaces of spodumene and albite,leading to its distinct collecting abilities for spodumene and albite particles.

Cooperative effect of sodium lauryl sulfate collector and sodium pyrophosphate depressant on the flotation separation of lead oxide minerals from hematite

As a cornerstone of the national economy,the iron and steel industry generates a significant amount of sintering dust containing both valuable lead resources and deleterious elements.Flotation is a promising technique for lead recovery from sintering dust,but efficient separation from Fe_(2)O_(3) is still challenging.This study investigated the cooperative effect of sodium lauryl sulfate(SLS,C_(12)H_(25)SO_(4)Na)and sodium pyrophosphate(SPP,Na_(4)P_(2)O_(7))on the selective flotation of lead oxide minerals(PbOHCl and PbSO_(4))from hematite(Fe_(2)O_(3)).Optimal flotation conditions were first identified,resulting in high recovery of lead oxide minerals while inhibiting Fe_(2)O_(3) flotation.Zeta potential measurements,Fourier transform infrared spectroscopy(FT-IR)analysis,adsorption capacity analysis,and X-ray photoelectron spectroscopy(XPS)studies offer insights into the adsorption behaviors of the reagents on mineral surfaces,revealing strong adsorption of SLS on PbOHCl and PbSO_(4) surfaces and remarkable adsorption of SPP on Fe_(2)O_(3).The proposed model of reagent adsorption on mineral surfaces illustrates the selective adsorption behavior,highlighting the pivotal role of reagent adsorption in the separation process.These findings contribute to the efficient and environmentally friendly utilization of iron ore sintering dust for lead recovery,paving the way for sustainable resource management in the iron and steel industry.

Flotation separation of brucite and calcite in dodecylamine system enhanced by regulator potassium dihydrogen phosphate

To achieve efficient flotation separation of brucite and calcite,flotation separation experiments were conducted on two minerals using dodecylamine(DDA)as the collector and potassium dihydrogen phosphate(PDP)as the regulator.The action mechanism of DDA and PDP was explored through contact angle measurement,zeta potential detection,solution chemistry calculation,FTIR analysis,and XPS detection.The flotation results showed that when DDA dosage was 35 mg/L and PDP dosage was 40 mg/L,the maximum floating difference between brucite and calcite was 79.81%,and the selectivity separation index was 6.46.The detection analysis showed that the main dissolved component HPO_(4)^(2−)of PDP is selectively strongly adsorbed on the Ca site on the surface of calcite,promoting the adsorption of the main dissolved component RNH_(3)^(+)of DDA on calcite surface,while brucite is basically not affected by PDP.Therefore,PDP is an effective regulator for the reverse flotation separation of brucite and calcite in DDA system.

Advances in depressants for flotation separation of Cu–Fe sulfide minerals at low alkalinity:A critical review

The flotation separation of Cu–Fe sulfide minerals at low alkalinity can be achieved using selective depressants.In the flotation system of Cu–Fe sulfide minerals,depressants usually preferentially interact with the pyrite surface to render the mineral surface hydrophilic and hinder the adsorption of the collector.This review summarizes the advances in depressants for the flotation separation of Cu–Fe sulfide minerals at low alkalinity.These advances include use of inorganic depressants (oxidants and sulfur–oxygen compounds),natural polysaccharides (starch,dextrin,konjac glucomannan,and galactomannan),modified polymers (carboxymethyl cellulose,polyacrylamide,lignosulfonate,and tricarboxylate sodium starch),organic acids (polyglutamic acid,sodium humate,tannic acid,pyrogallic acid,salicylic acid,and lactic acid),sodium dimethyl dithiocarbamate,and diethylenetriamine.The potential application of specific inorganic and organic depressants in the flotation separation of Cu–Fe sulfide minerals at low alkalinity is reviewed.The advances in the use of organic depressants with respect to the flotation separation of Cu–Fe sulfide minerals are comprehensively detailed.Additionally,the depression performances and mechanisms of different types of organic depressants on mineral surfaces are summarized.Finally,several perspectives on depressants vis-à-vis flotation separation of Cu–Fe sulfide minerals at low alkalinity are proposed.

Effect of depressants on flotation separation of magnesite from dolomite and calcite

The flotation separation of magnesite from calcium-containing minerals has always been a difficult subject in minerals processing.This work studied the inhibition effects of carboxymethyl cellulose(CMC),sodium lignosulphonate,polyaspartic acid(PASP)and sodium silicate on flotation behaviors of magnesite,dolomite and calcite,providing guidance for the development of reagents in magnesite flotation.The micro-flotation results showed that among these four depressants,sodium silicate presented the strongest selectivity due to the highest recovery difference,and the flotation separation of magnesite from dolomite and calcite could be achieved by using sodium silicate as the depressant.Contact angle measurement indicated that the addition of sodium silicate caused the largest differences in surface wettability of the three minerals,which was in line with micro-flotation tests.Furthermore,zeta potential test,the Fourier transform infrared(FT-IR)spectroscopy and atomic force microscope(AFM)imaging were used to reveal the inhibition mechanism of sodium silicate.The results indicated that the dominated component SiO(OH)3
of sodium silicate could adsorb on minerals surfaces,and the adsorption of sodium silicate hardly affected the adsorption of NaOL on magnesite surface,but caused the reduction of NaOL adsorption on dolomite and calcite surfaces,thereby increasing the flotation selectivity.

Activation mechanism of ammonium oxalate with pyrite in the lime system and its response to flotation separation of pyrite from arsenopyrite

The activation properties of ammonium oxalate on the flotation of pyrite and arsenopyrite in the lime system were studied in this work.Single mineral flotation tests showed that the ammonium oxalate strongly activated pyrite in high alkalinity and high Ca^(2+)system,whereas arsenopyrite was almost unaffected.In mineral mixtures tests,the recovery difference between pyrite and arsenopyrite after adding ammonium oxalate is more than 85%.After ammonium oxalate and ethyl xanthate treatment,the hydrophobicity of pyrite increased significantly,and the contact angle increased from 66.62°to 75.15°and then to 81.21°.After ammonium oxalate treatment,the amount of ethyl xanthate adsorption on the pyrite surface significantly increased and was much greater than that on the arsenopyrite surface.Zeta potential measurements showed that after activation by ammonium oxalate,there was a shift in the zeta potential of pyrite to more negative values by adding xanthate.X-ray photoelectron spectroscopy test showed that after ammonium oxalate treatment,the O 1s content on the surface of pyrite decreased from 44.03%to 26.18%,and the S 2p content increased from 14.01%to 27.26%,which confirmed that the ammonium oxalatetreated pyrite surface was more hydrophobic than the untreated surface.Therefore,ammonium oxalate may be used as a selective activator of pyrite in the lime system,which achieves an efficient flotation separation of S-As sulfide ores under high alkalinity and high Ca2+concentration conditions.

Flotation separation of andalusite from quartz using sodium petroleum sulfonate as collector

The floatability of andalusite and quartz was studied using sodium petroleum sulfonate as collector, being successfully applied in the real ore separation. The collecting performance on minerals was interpreted by means of zeta potential measurement and infrared spectroscopic analysis. The single mineral experiments showed that andalusite got good floatability in acidic pH region while quartz exhibited very poor floatability in the whole pH range. At pH 3, the presence of Fe3+ obviously activated quartz, causing the identical flotation behavior of the two minerals, and calcium lignosulphonate exhibited good selective inhibition to quartz. The real ore test results showed that andalusite concentrate with 53.46% Al2O3 and quartz concentrate with 92.74% SiO2 were obtained. The zeta potential and infrared spectroscopic analysis results indicated that chemical adsorption occurred between sodium petroleum sulfonate and andalusite.

A novel green depressant for flotation separation of scheelite from calcite

Polyaspartic acid(PASP)was used as a novel environmental-friendly depressant,and its inhibition effect on flotation performance of scheelite and calcite using sodium oleate(NaOL)as a collector was investigated by ways of flotation experiments,zeta potential measurement,contact angle measurement and infrared spectroscopic analysis(IR).The results show that PASP exhibits stronger inhibition capability and selectivity than acidified water glass,and the flotation separation of scheelite from calcite can be realized in the presence of 6 mg/L PASP and 20 mg/L NaOL at pH>6.In the presence of PASP,the zeta potential of calcite surface almost keeps unchanged after adding NaOL,and the contact angle decreases sharply.Therefore,it is indicated that PASP significantly decreases the adsorption of NaOL on calcite surface.By contrast,it has no distinct effect on the adsorption of NaOL on the scheelite surface,which is further confirmed by IR results.

Flotation separation of molybdenite and talc using tragacanth gum as depressant and potassium butyl xanthate as collector

Tragacanth gum(TG)was explored as a depressant to realize the flotation separation of molybdenite and talc.The flotation experiments indicated that when using potassium butyl xanthate(PBX)as a collector,molybdenite showed excellent floatability while talc was completely depressed by TG,thus realizing the flotation separation of the two minerals.X-ray photoelectron spectroscopy(XPS)analysis results showed that TG was adsorbed on molybdenite surface via chemisorption.The results of contact angle measurement,Fourier transform infrared(FTIR)spectroscopy,and time-of-flight secondary ion mass spectrometry(ToF-SIMS)indicated that the pre-adsorption of TG on molybdenite could not hinder the further chemisorption of PBX on molybdenite.Because PBX has no collecting ability on talc,the flotation separation of molybdenite and talc came true using PBX to collect molybdenite and TG to depress talc.

Flotation separation of quartz from magnesite using carboxymethyl cellulose as depressant

Carboxymethyl cellulose(CMC)was introduced as a depressant in reverse flotation separation of quartz from magnesite.The flotation behavior and surface properties of magnesite and quartz exposed to CMC were studied by zeta potential tests,atomic force microscopy imaging and contact angle measurements.The addition of CMC as the depressant in reverse flotation using dodecylamine(DDA)as the collector exhibited a selectively depressive performance towards magnesite and achieved an improved recovery of magnesite.The study of surface properties demonstrated that CMC and DDA exhibited different adsorption strengths on the surface of magnesite and quartz.It was found that the adsorption of CMC on magnesite surface was stronger than that of DDA,which hindered the subsequent adsorption of DDA on magnesite surface.On the contrary,the quartz surface was strongly adsorbed by DDA instead of CMC,which proved that the addition of CMC did not influence the flotation of quartz.

Studies of benzyl hydroxamic acid/calcium lignosulphonate addition order in the flotation separation of smithsonite from calcite

Flotation separation of smithsonite from calcite is difficult due to their similar surface properties.In the present study,a reagent scheme of depressant calcium lignosulphonate(CLS) and collector benzyl hydroxamic acid(BHA) was introduced in the flotation of smithsonite from calcite.Microflotation tests revealed that the efficient flotation of smithsonite from calcite could only be obtained with the addition order of BHA before CLS,which was opposite to the widely-used order that adding depressant prior to the collector.The zeta potential measurements indicated that BHA selectively adsorbed onto smithsonite surface,then not allowed the CLS adsorption onto the smithsonite surface rather than calcite surface because of the steric hindrance,thereby the smithsonite surface remained hydrophobic while calcite surface became more hydrophilic after the addition of CLS.As a result,the calcite flotation was completely depressed while the smithsonite flotation recovery was still in high value,leading to the optimal flotation separation performance.

Selective depression mechanism of combination of lime and sodium humate on arsenopyrite in flotation separation of Zn-As bulk concentrate

Lime(CaO)and sodium humate(NaHA)were used as the combined depressant for arsenopyrite pre-treated by CuSO_(4) and butyl xanthate.Micro-flotation tests show that the combined depressant CaO and NaHA achieved the selective depression of arsenopyrite.Closed-circuit lab-scale test results indicate that the synergistic effect of CaO+NaHA achieved a satisfactory flotation separation of sphalerite and arsenopyrite,for which the Zn grade and recovery of Zn concentrate were 51.21%and 92.21%,respectively.Contact angle measurements,adsorption amount measurements and X-ray photoelectron spectroscopy analysis indicate that the dissolved calcium species(mainly as Ca(2+))were adsorbed on the mineral surfaces,thereby promoting NaHA adsorption.Moreover,the surface of the arsenopyrite absorbed more amount of calcium species and NaHA than that of the sphalerite,thereby accounting for the strong hydrophilic surface of arsenopyrite.The adsorption of NaHA on arsenopyrite was mainly chemical adsorption through its carboxyl groups and Ca atoms,whereas that on sphalerite surface was relatively weak.

Effect of butanol on flotation separation of quartz from hematite with N-dodecyl ethylenediamine

In order to investigate the effect of butanol on quartz flotation when N-dodecyl ethylenediamine(ND)was used as collector, single mineral flotation and artificial mixed mineral(hematite and quartz were mixed at a mass ratio of 3:2) separation were conducted in the laboratory. Experimental results indicated that addition of butanol could improve the collecting performance of ND on quartz and enhance the floatability of quartz. Best flotation recovery of quartz was obtained when butanol was mixed with ND at a mass ratio of 1:1. Moreover, the molecular structure of alcohols had a significant effect on mineral recovery. Best separation efficiency could be obtained when tert-butanol was added as it had the largest cross-sectional area. Zeta potential measurements indicated that alcohols could strengthen electrostatic adsorption between quartz and collector. Molecular dynamic simulations revealed that co-adsorption of alcohols along with ND had taken place on the quartz surface, and ND/tert-butyl combinations were more easily absorbed on the quartz surface.

Interaction mechanism of ferrate(Ⅵ) with arsenopyrite surface and its effect on flotation separation of chalcopyrite from arsenopyrite

Potassium ferrate(K_(2)FeO_(4)) was used as a novel environmental-friendly depressant,and its inhibition effect on flotation performance of arsenopyrite and chalcopyrite using potassium ethyl xanthate(PEX)as a collector was investigated by flotation experiments,contact angle measurements,adsorption measurements,localized electrochemical impedance spectroscopy(LEIS)measurements,and X-ray photoelectron spectroscopy(XPS)analyses.The results showed that K_(2)FeO_(4)strongly depressed arsenopyrite in a pH range of 4−11,and the flotation separation of chalcopyrite from arsenopyrite could be realized in the presence of 5×10^(−4)mol/L K_(2)FeO_(4)and 5×10^(−5)mol/L PEX at pH 8 or 10.In the presence of K_(2)FeO_(4) and PEX,the contact angle and the xanthate adsorption capacity of arsenopyrite decreased significantly.LEIS measurements showed that the addition of ferrate could significantly increase the impedance of the arsenopyrite surface.XPS analyses further confirmed that ferrate accelerated the oxidation of arsenopyrite surface.

Flotation separation of feldspar from quartz using sodium fluosilicate as a selective depressant

The physical and chemical properties of feldspar and quartz are highly similar,thus they cannot be easily separated effectively.In this work,the flotation separation of feldspar from quartz using sodium fluosilicate(Na_(2)SiF_(6);SF)as a selective depressant was investigated.Moreover,the influence mechanism of SF on the selective flotation separation of feldspar and quartz was investigated via flotation tests,chemical analysis of flotation solution,Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and contact angle analysis.The results of the flotation tests show that feld spar and quartz without SF treatment have good floatability.After SF treatment,feldspar still has good floatability,whereas quartz has significantly reduced floatability.Flotation solution chemical analysis shows that the functional group plays an important role in depressing the quartz is[SiF_(6)]^(2-).FTIR,XPS and contact angle analysis results show that[SiF_(6)]^(2-)is adsorbed only on the surface of quartz.Thus,a thin hydrophilic SiOF layer is generated on the surface,which interferes with the adsorption of the collector on the surface of the quartz.This phenomenon leads to a significant reduction in quartz's floatability.Therefore,SF has a good ability to separate feldspar from quartz by flotation.

Enhancing sustainability in phosphate ore processing:Performance of frying oil as alternative flotation collector for carbonate removal

Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector designed to efficiently remove carbonates and enhance phosphate enrichment in froth flotation processes.This study focuses on the synthesis of an anionic collector using the saponification reaction of a frying oil sample,subsequently applied to the flotation of calcite and dolomite.To elucidate the adsorption mechanisms of the frying oil collector(FrOC)and sodium oleate,a reference collector,on fluorapatite,calcite,dolomite,and quartz surfaces,comprehensive experiments were conducted,including zeta potential measurements and Fourier transform infrared spectroscopy.Results revealed diverse adsorption affinities of the molecules towards these minerals.To assess the practical performance of the collector,flotation tests were conducted using a natural phosphate ore mixture,employing a BoxBehnken experimental design.Notably,under optimized conditions(pH 9,1000 g/t of FrOC,3.5 min of conditioning,and 6 min of flotation),FrOC exhibited excellent performance,with calcite and dolomite recoveries exceeding 80%,while apatite recovery in the concentrate fraction remained below 10%.This work exemplifies both circular economy practices and the distinctive approach to sustainable mineral processing.

Ferric ion-triggered surface oxidation of galena for efficient chalcopyrite-galena separation

The efficient separation of chalcopyrite(CuFeS2)and galena(PbS)is essential for optimal resource utilization.However,find-ing a selective depressant that is environmentally friendly and cost effective remains a challenge.Through various techniques,such as mi-croflotation tests,Fourier transform infrared spectroscopy,scanning electron microscopy(SEM)observation,X-ray photoelectron spec-troscopy(XPS),and Raman spectroscopy measurements,this study explored the use of ferric ions(Fe^(3+))as a selective depressant for ga-lena.The results of flotation tests revealed the impressive selective inhibition capabilities of Fe^(3+)when used alone.Surface analysis showed that Fe^(3+)significantly reduced the adsorption of isopropyl ethyl thionocarbamate(IPETC)on the galena surface while having a minimal impact on chalcopyrite.Further analysis using SEM,XPS,and Raman spectra revealed that Fe^(3+)can oxidize lead sulfide to form compact lead sulfate nanoparticles on the galena surface,effectively depressing IPETC adsorption and increasing surface hydrophilicity.These findings provide a promising solution for the efficient and environmentally responsible separation of chalcopyrite and galena.

Synergistic strengthening mechanism of Ca^(2+)-sodium silicate to selective separation of feldspar and quartz

Inhibitors are important for flotation separation of quartz and feldspar.In this study,a novel combined inhibitor was used to separate quartz and feldspar in near-neutral pulp.Selective inhibition of the combined inhibitor was assessed by micro-flotation experiments.And a series of detection methods were used to detect differences in the surface properties of feldspars and quartz after flotation reagents and put forward the synergistic strengthening mechanism.The outcomes were pointed out that pre-mixing combined inhibitors were more effective than the addition of Ca^(2+)and SS in sequence under the optimal proportion of 1:5.A concentrate from artificial mixed minerals that was characterized by a high quartz grade and a high recovery was acquired,and was found to be 90.70wt% and 83.70%,respectively.It was demonstrated that the combined inhibitor selectively prevented the action of the collector and feldspar from Fourier-transform infrared(FT-IR)and adsorption capacity tests.The results of X-ray photoelectron spectroscopy(XPS)indicated that Ca^(2+)directly interacts with the surface of quartz to increase the adsorption of collectors.In contrast,the chemistry property of Al on the feldspar surface was altered by combined inhibitor due to Na^(+)and Ca^(2+)taking the place of K^(+),resulting in the composite inhibitor forms a hydrophilic structure,which prevents the adsorption of the collector on the surface of feldspar by interacting with the Al active site.The combination of Ca^(2+)and SS synergically strengthens the difference of collecting property between quartz and feldspar by collector,thus achieving the effect of efficient separation.A new strategy for flotation to separate quartz from feldspar in near-neutral pulp was provided.