Regulators are important components in pneumatic system, and their flow-rate characteristics are the key parameters for designers. According to the correlatively international standard and national standard of China, ...Regulators are important components in pneumatic system, and their flow-rate characteristics are the key parameters for designers. According to the correlatively international standard and national standard of China, which describe the flow-rate characteristics measurement method of pneumatic regulators, the pressure and the flow are measured point by point, and then the flow-rate characteristics curve is plotted point to point. This method has some disadvantages, such as equipment complexity, much air consumption, and low efficiency. To settle the problems presented above, this paper puts forward a new high efficient and energy saving flow-rate characteristics measurement method of regulators, which is based on the pressure response when charging and discharging to an isothermal tank without any flow meters. The measurement principle, the system and the steps are introduced. And the tracking differentiator is used for the data processing of the pressure difference. Two typical kinds of regulators were experimentally investigated, and their flow-rate characteristics curves were obtained with the new and the conventional method, respectively. Comparatively, it＇s proved that this new method is feasible because it is not only able to meet the demand of the measurement precision, but also to save energy and improve efficiency. Compared to the conventional method, the new method takes only about 1/10 amount of time and consumes about only 1/30 amount of air. Hopefully it will be able to serve as an international standard of flow-rate characteristics measurement method of regulators.展开更多
Thermodynamic characteristics are of great importance for the performance of a high-temperature flow-rate control valve,as high-temperature environment may bring problems,such as blocking of spool and increasing of le...Thermodynamic characteristics are of great importance for the performance of a high-temperature flow-rate control valve,as high-temperature environment may bring problems,such as blocking of spool and increasing of leakage,to the valve.In this paper,a high-temperature flow-rate control valve,pilot-controlled by a pneumatic servo system is developed to control the fuel supply for scramjet engines.After introducing the construction and working principle,the thermodynamic mathematical models of the valve are built based on the heat transfer methods inside the valve.By using different boundary conditions,different methods of simulations are carried out and compared.The steady-state and transient temperature field distribution inside the valve body are predicted and temperatures at five interested points are measured.By comparing the simulation and experimental results,a reasonable 3D finite element analysis method is suggested to predict the thermodynamic characteristics of the high-temperature flow-rate control valve.展开更多
Lithium ion battery cathode material LiNi0.8Co0.1Mn0.1O2(NCM811)was synthe-sized via a spray drying method.The effect of different spray drying flow-rates(200,250,300,and 400 mL·min^-1)on the structural and elect...Lithium ion battery cathode material LiNi0.8Co0.1Mn0.1O2(NCM811)was synthe-sized via a spray drying method.The effect of different spray drying flow-rates(200,250,300,and 400 mL·min^-1)on the structural and electrochemical properties of NCM811 are investigated.We find that the contents of Ni,Co,and Mn in the NCM811 cathode materials do not change significantly with the changing flow-rate,but the lattice parameter and morphology of the materials are significantly affected.Under the optimal spray drying flow-rate(250 mL·min^-1),the obtained NCM811 cathode(250NCM811)exhibits the best crystallinity,with the highest ratio of I(003)/I(104)in the XRD pattern.SEM images reveal the spherical morphology of 250NCM811 and the average diameter of about 5 mm.The results of electrochemical test show that the reversible capacity of 250NCM811 reaches 210 mA·g^-1 at 0.2 C(1 C=280 mA·g^-1).After 100 charge-discharge cycles at 1 C,the battery retains more than 94%of its initial capacity.Overall,spray drying flow-rate demonstrates great effect on the electrochemical properties of NCM811.展开更多
该文基于信息系统物理化的设想提出电力信息物理系统(cyber-physical power system,CPPS)中的信息流建模和计算分析方法。采用连续时间函数来刻画信息流的特征,并定义信息网络运行参数为流量累积函数、信息流速和时延。首先,基于遍历法...该文基于信息系统物理化的设想提出电力信息物理系统(cyber-physical power system,CPPS)中的信息流建模和计算分析方法。采用连续时间函数来刻画信息流的特征,并定义信息网络运行参数为流量累积函数、信息流速和时延。首先,基于遍历法搜索出信息流路径,建立信息流速矩阵的范式;然后利用改进的网络演算(network calculus,NC)特性赋值流速矩阵的元素;进一步采用流量累积函数表征信源数据发送规律,从而显式求解时延上界。最后将提出的信息流建模方法应用于智能变电站自动化系统的时延计算,通过与OPNET的仿真结果相比较,验证所提出模型的有效性,而且该方法可以提供定量分析指标以优化变电站组网方案设计中的信息流分布。展开更多
文摘Regulators are important components in pneumatic system, and their flow-rate characteristics are the key parameters for designers. According to the correlatively international standard and national standard of China, which describe the flow-rate characteristics measurement method of pneumatic regulators, the pressure and the flow are measured point by point, and then the flow-rate characteristics curve is plotted point to point. This method has some disadvantages, such as equipment complexity, much air consumption, and low efficiency. To settle the problems presented above, this paper puts forward a new high efficient and energy saving flow-rate characteristics measurement method of regulators, which is based on the pressure response when charging and discharging to an isothermal tank without any flow meters. The measurement principle, the system and the steps are introduced. And the tracking differentiator is used for the data processing of the pressure difference. Two typical kinds of regulators were experimentally investigated, and their flow-rate characteristics curves were obtained with the new and the conventional method, respectively. Comparatively, it＇s proved that this new method is feasible because it is not only able to meet the demand of the measurement precision, but also to save energy and improve efficiency. Compared to the conventional method, the new method takes only about 1/10 amount of time and consumes about only 1/30 amount of air. Hopefully it will be able to serve as an international standard of flow-rate characteristics measurement method of regulators.
文摘Thermodynamic characteristics are of great importance for the performance of a high-temperature flow-rate control valve,as high-temperature environment may bring problems,such as blocking of spool and increasing of leakage,to the valve.In this paper,a high-temperature flow-rate control valve,pilot-controlled by a pneumatic servo system is developed to control the fuel supply for scramjet engines.After introducing the construction and working principle,the thermodynamic mathematical models of the valve are built based on the heat transfer methods inside the valve.By using different boundary conditions,different methods of simulations are carried out and compared.The steady-state and transient temperature field distribution inside the valve body are predicted and temperatures at five interested points are measured.By comparing the simulation and experimental results,a reasonable 3D finite element analysis method is suggested to predict the thermodynamic characteristics of the high-temperature flow-rate control valve.
基金Supported by the National Natural Science Foundation of China(No.51602310)Fujian Provincial Department of Science and Technology(2019T3017)the DNL Cooperation Fund,CAS(DNL180308)。
文摘Lithium ion battery cathode material LiNi0.8Co0.1Mn0.1O2(NCM811)was synthe-sized via a spray drying method.The effect of different spray drying flow-rates(200,250,300,and 400 mL·min^-1)on the structural and electrochemical properties of NCM811 are investigated.We find that the contents of Ni,Co,and Mn in the NCM811 cathode materials do not change significantly with the changing flow-rate,but the lattice parameter and morphology of the materials are significantly affected.Under the optimal spray drying flow-rate(250 mL·min^-1),the obtained NCM811 cathode(250NCM811)exhibits the best crystallinity,with the highest ratio of I(003)/I(104)in the XRD pattern.SEM images reveal the spherical morphology of 250NCM811 and the average diameter of about 5 mm.The results of electrochemical test show that the reversible capacity of 250NCM811 reaches 210 mA·g^-1 at 0.2 C(1 C=280 mA·g^-1).After 100 charge-discharge cycles at 1 C,the battery retains more than 94%of its initial capacity.Overall,spray drying flow-rate demonstrates great effect on the electrochemical properties of NCM811.
文摘该文基于信息系统物理化的设想提出电力信息物理系统(cyber-physical power system,CPPS)中的信息流建模和计算分析方法。采用连续时间函数来刻画信息流的特征,并定义信息网络运行参数为流量累积函数、信息流速和时延。首先,基于遍历法搜索出信息流路径,建立信息流速矩阵的范式;然后利用改进的网络演算(network calculus,NC)特性赋值流速矩阵的元素;进一步采用流量累积函数表征信源数据发送规律,从而显式求解时延上界。最后将提出的信息流建模方法应用于智能变电站自动化系统的时延计算,通过与OPNET的仿真结果相比较,验证所提出模型的有效性,而且该方法可以提供定量分析指标以优化变电站组网方案设计中的信息流分布。
文摘目的探讨原发性干燥综合征(primary Sj gren syndrome,pSS)患者唾液胱抑素D水平与唾液腺损伤的相关性。方法纳入2022年9月1日至2023年6月30日就诊于西安交通大学第一附属医院风湿免疫科pSS组患者51例及年龄、性别匹配的来院健康体检对照组人员51例。检测唾液中胱抑素D水平,采用独立样本t检验评估两组胱抑素D水平的差异,采用Pearson相关性检验评估pSS组胱抑素D与临床指标的关系。结果pSS组唾液中胱抑素D水平明显低于对照组(206.55±108.11 vs 374.32±172.24 pg/mL,P<0.01)。pSS患者胱抑素D水平与其静态唾液流率(r=0.433,P=0.002)及动态唾液流率(r=0.363,P=0.009)呈正相关。高唾液腺超声检查评分的pSS患者唾液胱抑素D水平明显低于低评分患者(腮腺:160.75±85.56 vs 290.53±95.17 pg/mL,P<0.01;颌下腺:157.76±87.59 vs 276.25±97.06 pg/mL,P<0.01)。pSS患者胱抑素D水平与外周血IL-6水平(r=-0.453,P=0.001)及CD4+T细胞计数(r=-0.396,P=0.005)呈负相关。结论pSS患者唾液胱抑素D水平可作为反映唾液腺损伤的指标。
基金National Natural Science Foundation of China(No.51906262)Natural Science Foundation of Hunan Province,China(No.2020JJ5735)Youth Excellent Sci-Tech Talents Training Plan under Hunan Provincial Sci-Tech Talents Sponsorship Program,China(No.2023TJ-N10)。
