Management of geriatric acetabular fractures:Contemporary treatment strategies

Acetabular fractures in the geriatric population are typically low-energy fractures resulting from a fall from standing height.Compromised bone quality in the elderly,as well as this population’s concomitant medical comorbidities,render the management of such fractures challenging and controversial.Non-operative management remains the mainstay of treatment,although such a choice is associated with numerous and serious complications related to both the hip joint as well as the general condition of the patient.On the other hand,operatively treating acetabular fractures(e.g.,with osteosynthesis or total hip arthroplasty)is gaining popularity.Osteosynthesis can be performed with open reduction and internal fixation or with minimally invasive techniques.Total hip arthroplasty could be performed either in the acute phase combined with osteosynthesis or as a delayed procedure after a period of non-operative management or after failed osteosynthesis of the acetabulum.Regardless of the implemented treatment,orthogeriatric co-management is considered extremely crucial,and it is currently one of the pillars of a successful outcome after an acetabular fracture.

Finite Element Analysis of Coronal Shear Fractures of the Femoral Neck: Displacement of the Femoral Head and Effect of Osteosynthetic Implants

Coronal shear fractures of the femoral neck (CSFF) are the most challenging to treat among proximal femur fractures, directly affecting the life expectancy of patients with osteoporosis. However, an adequate osteosynthesis method has not been elucidated yet. This study investigated the displacement direction of the femoral head fragment and its effect on the bone using finite element method. A finite element model for CSFF was developed from CT image data of a patient with osteoporosis using Mechanical Finder (ver. 11). Subsequently, finite element analyses were performed on six osteosynthesis models under maximum load applied during walking. The compressive stresses, tensile stresses, and compressive strains of each model were examined. The results suggested that the compressive and tensile stress distributions were concentrated on the anterior side of the femoral neck. Compressive strain distribution in the femoral head and neck was concentrated in four areas: at the tip of the blade or lag screw, the anteroinferior side of the blade or lag screw near the fracture site, and the upper right and lower left near the junction of the blade or lag screw and nail. Thus, the distribution of both these stresses revealed that the femoral head fragment was prone to anterior and inferior displacement. Distribution of compressive strains revealed the direction of the stress exerted by the osteosynthetic implant on the bone. The same results were observed in all osteosynthetic implants;thus, the findings could lay the foundation for developing methods for placing osteosynthetic implants less prone to displacement and the osteosynthetic implants themselves. In particular, the study provides insight into the optimal treatment of CSFF.

Development characteristics and controlling factors of fractures in lacustrine shale and their geological significance for evaluating shale oil sweet spots in the third member of the Shahejie Formation in the Qikou Sag, Bohai Bay Basin

Natural fractures are critical for shale oil and gas enrichment and development. Due to the extremely high heterogeneity of shale, the factors controlling the formation of internal fractures, especially horizontal fractures, remain controversial. In this study, we integrate thin section analysis and microcomputed tomography(CT) data from several lacustrine shale samples from the third member(Es3) of the Shahejie Formation, Qikou Sag, Bohai Bay Basin, to assess the fractures in detail. The goal is to reveal the development characteristics, controlling factors, and geological significance for evaluating sweet spots in a shale oil play. The fractures in the Es3contain high-angle structural and horizontal bed-parallel fractures that are mostly shear and extensional. Various factors influence fracture development,including lithofacies, mineral composition, organic matter content, and the number of laminae. Structural fractures occur predominantly in siltstone, whereas bed-parallel fractures are abundant in laminated shale and layered mudstone. A higher quartz content results in higher shale brittleness, causing fractures, whereas the transformation between clay minerals contributes to the development of bedparallel fractures. Excess pore pressure due to hydrocarbon generation and expulsion during thermal advance can cause the formation of bed-parallel fractures. The density of the bed-parallel and structural fractures increases with the lamina density, and the bed-parallel fractures are more sensitive to the number of laminae. The fractures are critical storage spaces and flow conduits and are indicative of sweet spots. The laminated shale in the Es3with a high organic matter content contains natural fractures and is an organic-rich, liquid-rich, self-sourced shale play. Conversely, the siltstone, massive mudstone, and argillaceous carbonate lithofacies contain lower amounts of organic matter and do not have bed-parallel fractures. However, good reservoirs can form in these areas when structural fractures are present and the source, and storage spaces are separated.

P-and SV-wave dispersion and attenuation in saturated microcracked porous rock with aligned penny-shaped fractures

P-and SV-wave dispersion and attenuation have been extensively investigated in saturated poroelastic media with aligned fractures.However,there are few existing models that incorporate the multiple wave attenuation mechanisms from the microscopic scale to the macroscopic scale.Hence,in this work,we developed a unified model to incorporate the wave attenuation mechanisms at different scales,which includes the microscopic squirt flow between the microcracks and pores,the mesoscopic wave-induced fluid flow between fractures and background(FB-WIFF),and the macroscopic Biot's global flow and elastic scattering(ES)from the fractures.Using Tang's modified Biot's theory and the mixed-boundary conditions,we derived the exact frequency-dependent solutions of the scattering problem for a single penny-shaped fracture with oblique incident P-and SV-waves.We then developed theoretical models for a set of aligned fractures and randomly oriented fractures using the Foldy approximation.The results indicated that microcrack squirt flow considerably influences the dispersion and attenuation of P-and SV-wave velocities.The coupling effects of microcrack squirt flow with the FB-WIFF and ES of fractures cause much higher velocity dispersion and attenuation for P waves than for SV waves.Randomly oriented fractures substantially reduce the attenuation caused by the FB-WIFF and ES,particularly for the ES attenuation of SV waves.Through a comparison with existing models in the limiting cases and previous experimental measurements,we validated our model.

Stress tensor determination by modified hydraulic tests on pre-existing fractures:Method and stress constraints

The hydraulic testing of pre-existing fractures(HTPF)is one of the most promising in situ stress measurement methods,particularly for three-dimensional stress tensor determination.However,the stress tensor determination based on the HTPF method requires at least six tests or a minimum of 14-15 tests(under different conditions)for reliable results.In this study,we modified the HTPF method by considering the shear stress on each pre-existing fracture,which increased the number of equations for the stress tensor determination and decreased the number of tests required.Different shear stresses were attributed to different fractures by random sampling;therefore,the stress tensors were obtained by searching for the optimal solution using the least squares criterion based on the Monte Carlo method.Thereafter,we constrained the stress tensor based on the tensile strength criterion,compressive strength criterion,and vertical stress constraints.The inverted stress tensors were presented and analyzed based on the tensorial nature of the stress using the Euclidean mean stress tensor.Two stress-measurement campaigns in Weifang(Shandong Province,China)and Mercantour road tunnel(France)were implemented to highlight the validity and efficiency of the modified HTPF(M-HTPF)method.The results showed that the M-HTPF method can be applied for stress tensor inversion using only three to four tests on pre-existing fractures,neglecting the stress gradient.The inversion results were confined to relatively small distribution dispersions and were significantly reliable and stable due to the shear stresses on the fractures and the stress constraints employed.The M-HTPF method is highly feasible and efficient for complete stress tensor determination in a single borehole.

Bipolar hip arthroplasty using conjoined tendon preserving posterior lateral approach in treatment of displaced femoral neck fractures

BACKGROUND Hip fractures account for 23.8%of all fractures in patients over the age of 75 years.More than half of these patients are older than 80 years.Bipolar hemiarthroplasty(BHA)was established as an effective management option for these patients.Various approaches can be used for the BHA procedure.However,there is a high risk of postoperative dislocation.The conjoined tendon-preserving posterior(CPP)lateral approach was introduced to reduce postoperative dislocation rates.AIM To evaluate the effectiveness and safety of the CPP lateral approach for BHA in elderly patients.METHODS We retrospectively analyzed medical data from 80 patients with displaced femoral neck fractures who underwent BHA.The patients were followed up for at least 1 year.Among the 80 patients,57(71.3%)were female.The time to operation averaged 2.3 d(range:1-5 d).The mean age was 80.5 years(range:67-90 years),and the mean body mass index was 24.9 kg/m^(2)(range:17-36 kg/m^(2)).According to the Garden classification,42.5%of patients were typeⅢand 57.5%of patients were typeⅣ.Uncemented bipolar hip prostheses were used for all patients.Torn conjoined tendons,dislocations,and adverse complications during and after surgery were recorded.RESULTS The mean postoperative follow-up time was 15.3 months(range:12-18 months).The average surgery time was 52 min(range:40-70 min)with an average blood loss of 120 mL(range:80-320 mL).The transfusion rate was 10%(8 of 80 patients).The gemellus inferior was torn in 4 patients(5%),while it was difficult to identify in 2 patients(2.5%)during surgery.The posterior capsule was punctured by the fractured femoral neck in 3 patients,but the conjoined tendon and the piriformis tendon remained intact.No patients had stem varus greater than 3 degrees or femoral fracture.There were no patients with stem subsidence more than 5 mm at the last follow-up.No postoperative dislocations were observed throughout the follow-up period.No significance was found between preoperative and postoperative mean Health Service System scores(87.30±2.98 vs 86.10±6.10,t=1.89,P=0.063).CONCLUSION The CPP lateral approach can effectively reduce the incidence of postoperative dislocation without increasing perioperative complications.For surgeons familiar with the posterior lateral approach,there is no need for additional surgical instruments,and it does not increase surgical difficulty.

Lateral femoral neck stress fractures: A case report

BACKGROUND Sport-induced injuries particularly affect young,healthy,and active individuals.Running,a popular and accessible sport,can cause a wide range of injuries,including stress fractures.Stress fractures can occur during high-intensity training or competitions,especially among well-trained amateurs and professional athletes.Adequate diagnosis can be complicated by the typically young age,unremarkable medical history,and vital condition of the patient.Stress fractures present insidiously,and this is specifically the case with stress fractures of the femoral neck.Timely intervention is crucial to prevent progressive displacement,as this can damage the blood supply to the femoral head.CASE SUMMARY A 30-year-old male runner presented to our outpatient clinic with persistent pain 3 weeks after running a marathon.X-ray showed a complete lateral fracture of the left femoral neck,which was treated surgically with a dynamic hip screw.CONCLUSION It is essential for healthcare providers to be vigilant for the subtle symptoms of stress fractures to ensure timely treatment.Early recognition prevents com-plication and leads to a better prognosis.

Factors influencing further vertebral height loss following percutaneous vertebroplasty in osteoporotic vertebral compression fractures:A 1-year follow-up study

BACKGROUND Osteoporotic vertebral compression fractures(OVCFs)contribute to back pain and functional limitations in older individuals,with percutaneous vertebroplasty(PVP)emerging as a minimally invasive treatment.However,further height loss post-PVP prompts investigation into contributing factors.AIM To investigate the factors associated with further height loss following PVP with cement augmentation in OVCF patients.METHODS A total of 200 OVCF patients who underwent successful PVP between January 2021 and December 2022 were included in this study.“Further height loss”during 1 year of follow-up in OVCF patients with bone edema was defined as a vertical height loss of≥4 mm.The study population was divided into two groups for analysis:The“No Further Height Loss group(n=179)”and the“Further Height Loss group(n=21).”RESULTS In comparing two distinct groups of patients,significant differences existed in bone mineral density(BMD),vertebral compression degree,prevalence of intravertebral cleft(IVF),type of bone cement used,and cement distribution patterns.Results from binary univariate regression analysis revealed that lower BMD,the presence of IVF,cleft distribution of bone cement,and higher vertebral compression degree were all significantly associated with further height loss.Notably,the use of mineralized collagen modified-poly(methyl methacrylate)bone cement was associated with a significant reduction in the risk of further height loss.In multivariate regression analysis,lower BMD and the presence of IVF remained significantly associated with further height loss.CONCLUSION Further height loss following PVP in OVCF patients is influenced by a complex interplay of factors,especially lower BMD and the presence of IVF.These findings underscore the importance of assessing and managing these factors when addressing height loss following PVP in OVCF patients.

Direct anterior compared to posterior approach for hip hemiarthroplasty following femoral neck fractures

The differences in complication rates between the direct anterior and posterior approaches for hemiarthroplasty in elderly patients with femoral neck fractures are not yet fully understood.Dislocation,a severe complication associated with increased mortality and often requiring additional surgery,may occur less frequently with the direct anterior approach compared to the posterior approach.Careful consideration of patient demographics is essential when planning the surgical approach.Future research in this area should focus on robust randomized controlled trials involving elderly patients recovering from femoral neck fractures.

Meta-analysis of the clinical efficacy of the Gamma3 nail vs Gamma3U-blade system in the treatment of intertrochanteric fractures

BACKGROUND The traditional Gamma3 nail is a mainstream treatment for femoral intertrochanteric fractures.Literature reports that the Gamma3U-blade system can increase the stability of the Gamma3 nail and reduce complication incidence.However,comparative studies between the Gamma3U-blade and Gamma3 systems are limited;hence,this meta-analysis was performed to explore the clinical efficacy of these two surgical methods.AIM To investigate the clinical efficacy of Gamma3 and Gamma3 U-blade for intertrochanteric fractures.METHODS A computerized search for Chinese and English literature published from 2010 to 2022 was conducted in PubMed,Cochrane,CNKI,Wanfang,and VIP databases.The search keywords were gamma 3,gamma 3 U blade,and intertrochanteric fracture.Additionally,literature tracking was performed on the references of published literature.The data were analyzed using Revman 5.3 software.Two individuals checked the inputs for accuracy.Continuous variables were described using mean difference and standard deviation,and outcome effect sizes were expressed using ratio OR and 95%confidence interval(CI).High heterogeneity was considered at(P<0.05,I2>50%),moderate heterogeneity at I2 from 25%to 50%,and low heterogeneity at(P≥0.05,I2<50%).RESULTS Following a comprehensive literature search,review,and analysis,six articles were selected for inclusion in this study.This selection comprised five articles in English and one in Chinese,with publication years spanning from 2016 to 2022.The study with the largest sample size,conducted by Seungbae in 2021,included a total of 304 cases.Statistical analysis:A total of 1063 patients were included in this meta-analysis.The main outcome indicators were:Surgical time:The Gamma3U blade system had a longer surgical time compared to Gamma3 nails(P=0.006,I2=76%).Tip-apex distance:No statistical significance or heterogeneity was observed(P=0.65,I2=0%).Harris Hip score:No statistical significance was found,and low heterogeneity was detected(P=0.26,I2=22%).Union time:No statistical significance was found,and high heterogeneity was detected(P=0.05,I2=75%).CONCLUSION Our study indicated that the Gamma3 system reduces operative time compared to the Gamma3 U-blade system in treating intertrochanteric fractures.Both surgical methods proved to be safe and effective for this patient group.These findings may offer valuable insights and guidance for future surgical protocols in hip fracture patients.

Pelvic fractures in blunt trauma patients:A comparative study

BACKGROUND Pelvic fractures(PF)with concomitant injuries are on the rise due to an increase of high-energy trauma.Increase of the elderly population with age related comorbidities further complicates the management.Abdominal organ injuries are kindred with PF due to the proximity to pelvic bones.Presence of contrast blush(CB)on computed tomography in patients with PF is considered a sign of active bleeding,however,its clinical significance and association with outcomes is debatable.AIM To analyze polytrauma patients with PF with a focus on the geriatric population,co-injuries and the value of contrast blush.METHODS This retrospective cohort study included 558 patients with PF admitted to level 1 trauma center(01/2017-01/2023).Analyzed variables included:Age,sex,mechanism of injury(MOI),injury severity score(ISS),Glasgow coma scale(GCS),abbreviated injury scale(AIS),co-injuries,transfusion requirements,pelvic angiography,embolization,laparotomy,orthopedic pelvic surgery,intensive care unit and hospital lengths of stay,discharge disposition and mortality.The study compared geriatric and non-geriatric patients,patients with and without CB and abdominal co-injuries.Propensity score matching was implemented in comparison groups.RESULTS PF comprised 4%of all trauma admissions.89 patients had CB.286(52%)patients had concomitant injuries including 93(17%)patients with abdominal co-injuries.Geriatric patients compared to non-geriatric had more falls as MOI,lower ISS and AIS pelvis,higher GCS,less abdominal co-injuries,similar CB and angio-embolization rates,less orthopedic pelvic surgeries,shorter lengths of stay and higher mortality.After propensity matching,orthopedic pelvic surgery rates remained lower(8%vs 19%,P<0.001),hospital length of stay shorter,and mortality higher(13%vs 4%,P<0.001)in geriatric patients.Out of 89 patients with CB,45(51%)were embolized.After propensity matching,patients with CB compared to without CB had more pelvic angiography(71%vs 12%,P<0.001),higher embolization rates(64%vs 22%,P=0.02)and comparable mortality.CONCLUSION Half of the patients with PF had concomitant co-injuries,including abdominal co-injuries in 17%.Similarly injured geriatric patients had higher mortality.Half of the patients with CB required an embolization.

Management of Mandibular Fractures in Children in Ivory Coast: Experience of the Stomatology and Maxillofacial Surgery Department at the University Hospital of Cocody from 2000 to 2019

Introduction: Mandibular fractures in children are becoming increasingly common. Treatment of these fractures is difficult due to their anatomical and physiological complexity. Therefore, there is a need for well-codified management. Our main aim was to develop a decision algorithm for the management of mandibular fractures in children based on our experience. Materials and Methods: This was a retrospective descriptive study carried out in the Department of Stomatology and Maxillofacial Surgery at the University Hospital of Cocody over a period of 20 years (2000-2019). Results: We enrolled 58 patients. The mean age of the patients was 9.35 ± 2.3 years with a sex ratio of 2.22. Traffic accidents were the main cause of mandibular fractures (60.35%). Condylar fractures were the most common (46.87%). Treatment was orthopedic in 45.76% of cases, mixed (orthopedic and surgical) in 24.14% and surgical in 5.17%. Patients were followed up weekly for 1 month, then monthly for 6 months and annually for 3 years, with panoramic radiographs of the maxilla starting at 21 days. We observed 2 cases of complications: temporomandibular ankylosis and gingival stomatitis. Conclusion: Mandibular fractures are common in children. Management is difficult due to anatomical and physiological peculiarities. The choice of treatment depends on several criteria.

Functional Outcomes of Adult Tibia Shaft Fractures Treated with Solid Intramedullary Nails versus Hollow Nails: A Systematic Review

Introduction: The management of fractures of the tibia shaft is an important aspect of orthopaedic care, and the selection of the surgical method for fixation can substantially impact patient outcomes. The current review aims to compare the outcomes of adult tibia fractures treated with solid nails to those treated with hollow nails. Methods: A search on Scopus, PubMed, and Cochrane Library, using three keywords (Outcome, Tibia shaft fractures, Nail) was conducted in April 2023. Results were compiled and two independent reviewers screened and selected eligible articles After removing duplicates, titles and abstracts were read to exclude ineligible studies. Full-text articles of the remaining papers were read to select eligible studies which were further critically appraised to ascertain their methodological quality. The data extracted from the selected papers were synthesized using a combination of pooling of results, tests of statistical difference (t-test and chi-square) and narrative synthesis methods. Results: A total of 2295 articles were obtained from the databases and citation searching. A total of 9 papers were identified as eligible and included in the review. Findings revealed that there is no statistical difference in the outcomes of tibia fractures treated with either solid or hollow nail groups such as duration of surgery (p = 0.541), rate of delayed and non-union (p = 0.342), and rate of surgical site infections (p = 0.395). Conclusion: Intramedullary nailing of tibia shaft fractures with either solid or hollow nails have similar functional outcomes.

Axial load-share ratio testing to assess the healing of open tibial fractures treated with the Taylor Spatial Frame

Background:The Taylor Spatial Frame(TSF)has gained popularity among orthopedic surgeons for treating open fractures.However,a key challenge is the timely and safe removal of the frame.This study assessed the efficacy and safety of axial load-share ratio(ALSR)testing to evaluate callus healing strength after TSF treatment of open tibial fractures.Methods:A retrospective case-control study was conducted,analyzing 180 adult patients with open tibial fractures treated at Tianjin Hospital’s Orthopedic Limb Correction Unit between August 2019 and August 2022.All patients underwent TSF external fixation surgery,and were divided into two groups based on ALSR testing.Group I(92 patients)underwent ALSR testing,with frame removal if the test value fell below 5%.Traditional methods were used for fixator removal guidance in Group II(88 patients).Clinical outcomes,including fixation duration,complications after fixator removal,and Johner-Wruhs functional scores,were compared between the two groups.Results:The groups showed no statistically significant differences(P>0.05)in sex,age,injury side,body mass index,surgery timing,or fracture type.Group I had a significantly shorter fixation duration(25.85±5.57 weeks)compared to Group II(31.82±6.98 weeks)(P<0.05).Following fixator removal,Group I demonstrated superior Johner-Wruhs scores compared to Group II,indicating better outcomes(P<0.05).Complication rates did not differ significantly between the groups at the last follow-up(P>0.05).Conclusion:Regular postoperative ALSR testing could safely and effectively guide TSF removal following open tibial fracture treatment.This method significantly reduced fixation duration compared to traditional guidance methods while maintaining efficacy and safety.

Percutaneous Fixation as an Option for Traumatic Neurologically Intact Thoracolumbar Vertebral Fractures

Background: The most frequent spinal fracture is the thoracolumbar fracture. Minimally invasive percutaneous fixation of cases having thoracolumbar vertebral fractures without neurological impairments has remained controversial. The advantages of minimally invasive percutaneous fixation are decreasing muscle and soft tissue injury, decreasing blood loss and infection rate, in addition to shortening hospital stay and recovery times. In comparison to the open technique, percutaneous fixation is adequate for treating thoracolumbar (TL) fractures without causing neurological impairments & with satisfactory outcomes in terms of kyphosis decline. Elevated radiation exposure to the surgeon &the patient, lack of decompression and fusion via bone graft, & a steep learning curve are all disadvantages of percutaneous fixation of vertebral fractures. Methods: This study was retrospectively conducted on forty-eight patients, age ranging from 16 to 65 years old, with a thoracolumbar (TL) fracture without causing neurological impairments who were meeting the eligibility criteria for fixation in the period from July 2019 to January 2024. Results: We included the forty-eight patients who met the inclusion criteria (34 males and 14 females) their ages ranged from 16 to 65 years. The most common pathology was L1 fracture in 38 patients. No major complications were experienced, only wound infection in five patients which was treated efficiently with repeated dressings and broad-spectrum antibiotics. Four patients experienced misdirected screws, only in one patient the screw encroach into the spinal canal with no deficit experienced, while the other three showed minimally laterally deviated screws. Conclusion: The advantages of percutaneous pedicle screw fixation in thoracolumbar fractures through preservation of posterior musculature, are less blood loss, shorter operative time, lower infection risk, less post-operative pain, shorter rehabilitation time as well as a shorter hospital stay. Limitations of percutaneous fixation include the inability to achieve direct spinal canal decompression and, not having the option to perform a fusion and also requiring a learning curve to master the anatomy and technique.

Clinical Effectiveness of the Plate Screw Internal Fixation Technique in the Treatment of Patients with Traumatic Fractures of Long Bones in the Lower Extremities

Objective: To investigate the effectiveness of the plate screw internal fixation technique on the clinical outcomes of patients with traumatic fractures of long bones in the lower extremities. Methods: From January 2022 to December 2023, 70 patients with traumatic fractures of long bones in the lower extremities were admitted to the hospital and randomly divided into two groups: the control group and the observation group, each consisting of 35 cases. The control group underwent traditional closed interlocking intramedullary nailing, while the observation group received internal fixation with steel plates and screws. Relevant surgical indicators, treatment effectiveness, and postoperative complication rates were compared between the two groups. Results: The observation group exhibited significantly short surgical duration (80.65 ± 5.01 vs. 88.36 ± 5.26 minutes), fracture healing time (13.27 ± 0.32 vs. 15.52 ± 0.48 weeks), and hospitalization days (10.49 ± 1.13 vs. 16.57 ± 1.15 days) compared to the control group (P = 0.000). The effective treatment rate was significantly higher in the observation group (29/82.86%) than in the control group (21/60.00%), with a significant difference observed (χ2 = 4.480, P = 0.034). Additionally, the complication rate in the observation group (2/5.71%) was significantly lower than that in the control group (8/22.86%), with a correlated difference (χ2 = 4.200, P = 0.040). Conclusion: The plate screw internal fixation technique demonstrates significant clinical efficacy in treating traumatic fractures of long bones in the lower extremities. It improves the healing rate, reduces complications, and represents a safe and effective treatment strategy worthy of widespread use and application.

Effect of fracture fluid flowback on shale microfractures using CT scanning

The field data of shale fracturing demonstrate that the flowback performance of fracturing fluid is different from that of conventional reservoirs,where the flowback rate of shale fracturing fluid is lower than that of conventional reservoirs.At the early stage of flowback,there is no single-phase flow of the liquid phase in shale,but rather a gas-water two-phase flow,such that the single-phase flow model for tight oil and gas reservoirs is not applicable.In this study,pores and microfractures are extracted based on the experimental results of computed tomography(CT)scanning,and a spatial model of microfractures is established.Then,the influence of rough microfracture surfaces on the flow is corrected using the modified cubic law,which was modified by introducing the average deviation of the microfracture height as a roughness factor to consider the influence of microfracture surface roughness.The flow in the fracture network is simulated using the modified cubic law and the lattice Boltzmann method(LBM).The results obtained demonstrate that most of the fracturing fluid is retained in the shale microfractures,which explains the low fracturing fluid flowback rate in shale hydraulic fracturing.

Complication rates after direct anterior vs posterior approach for hip hemiarthroplasty in elderly individuals with femoral neck fractures

BACKGROUND Dislocation rates after hemiarthroplasty reportedly vary from 1%to 17%.This serious complication is associated with increased morbidity and mortality rates.Approaches to this surgery are still debated,with no consensus regarding the superiority of any single approach.AIM To compare early postoperative complications after implementing the direct anterior and posterior approaches(PL)for hip hemiarthroplasty after femoral neck fractures.METHODS This is a comparative,retrospective,single-center cohort study conducted at a university hospital.Between March 2008 and December 2018,273 patients(a total of 280 hips)underwent bipolar hemiarthroplasties(n=280)for displaced femoral neck fractures using either the PL(n=171)or the minimally invasive direct anterior approach(DAA)(n=109).The choice of approach was related to the surgeons’practices;the implant types were similar and unrelated to the approach.Dislocation rates and other complications were reviewed after a minimum followup of 6 mo.RESULTS Both treatment groups had similarly aged patients(mean age:82 years),sex ratios,patient body mass indexes,and patient comorbidities.Surgical data(surgery delay time,operative time,and blood loss volume)did not differ significantly between the groups.The 30 d mortality rate was higher in the PL group(9.9%)than in the DAA group(3.7%),but the difference was not statistically significant(P=0.052).Among the one-month survivors,a significantly higher rate of dislocation was observed in the PL group(14/154;9.1%)than in the DAA group(0/105;0%)(P=0.002).Of the 14 patients with dislocation,8 underwent revision surgery for recurrent instability(posterior group),and one of them had 2 additional procedures due to a deep infection.The rate of other complications(e.g.,perioperative and early postoperative periprosthetic fractures and infection-related complications)did not differ significantly between the groups.CONCLUSION These findings suggest that the DAA to bipolar hemiarthroplasty for patients with femoral neck fractures is associated with a lower dislocation rate(<1%)than the PL.

Evaluating the stability and volumetric flowback rate of proppant packs in hydraulic fractures using the lattice Boltzmann-discrete element coupling method

The stability and mobility of proppant packs in hydraulic fractures during hydrocarbon production are numerically investigated by the lattice Boltzmann-discrete element coupling method(LB-DEM).This study starts with a preliminary proppant settling test,from which a solid volume fraction of 0.575 is calibrated for the proppant pack in the fracture.In the established workflow to investigate proppant flowback,a displacement is applied to the fracture surfaces to compact the generated proppant pack as well as further mimicking proppant embedment under closure stress.When a pressure gradient is applied to drive the fluid-particle flow,a critical aperture-to-diameter ratio of 4 is observed,above which the proppant pack would collapse.The results also show that the volumetric proppant flowback rate increases quadratically with the fracture aperture,while a linear variation between the particle flux and the pressure gradient is exhibited for a fixed fracture aperture.The research outcome contributes towards an improved understanding of proppant flowback in hydraulic fractures,which also supports an optimised proppant size selection for hydraulic fracturing operations.

Visualization and characterization of experimental hydraulic fractures interacting with karst fracture-cavity distributions

Karst fracture-cavity carbonate reservoirs,in which natural cavities are connected by natural fractures to form cavity clusters in many circumstances,have become significant fields of oil and gas exploration and exploitation.Proppant fracturing is considered as the best method for exploiting carbonate reservoirs;however,previous studies primarily focused on the effects of individual types of geological formations,such as natural fractures or cavities,on fracture propagation.In this study,true-triaxial physical simulation experiments were systematically performed under four types of stress difference conditions after the accurate prefabrication of four types of different fracture-cavity distributions in artificial samples.Subsequently,the interaction mechanism between the hydraulic fractures and fracture-cavity structures was systematically analyzed in combination with the stress distribution,cross-sectional morphology of the main propagation path,and three-dimensional visualization of the overall fracture network.It was found that the propagation of hydraulic fractures near the cavity was inhibited by the stress concentration surrounding the cavity.In contrast,a natural fracture with a smaller approach angle(0°and 30°)around the cavity can alleviate the stress concentration and significantly facilitate the connection with the cavity.In addition,the hydraulic fracture crossed the natural fracture at the 45°approach angle and bypassed the cavity under higher stress difference conditions.A new stimulation effectiveness evaluation index was established based on the stimulated reservoir area(SRA),tortuosity of the hydraulic fractures(T),and connectivity index(CI)of the cavities.These findings provide new insights into the fracturing design of carbonate reservoirs.