With large scale wind turbines,the issue of aerodynamic elastic response is even more significant on dynamic behaviour of the system.Unsteady free vortex wake method is proposed to calculate the shape of wake and aero...With large scale wind turbines,the issue of aerodynamic elastic response is even more significant on dynamic behaviour of the system.Unsteady free vortex wake method is proposed to calculate the shape of wake and aerodynamic load.Considering the effect of aerodynamic load,inertial load and gravity load,the decoupling dynamic equations are established by using finite element method in conjunction of the modal method and equations are solved numerically by Newmark approach.Finally,the numerical simulation of a large scale wind turbine is performed through coupling the free vortex wake modelling with structural modelling.The results show that this coupling model can predict the flexible wind turbine dynamic characteristics effectively and efficiently.Under the influence of the gravitational force,the dynamic response of flapwise direction contributes to the dynamic behavior of edgewise direction under the operational condition of steady wind speed.The difference in dynamic response between the flexible and rigid wind turbines manifests when the aerodynamics/structure coupling effect is of significance in both wind turbine design and performance calculation.展开更多
A coupled Navier-Stokes/free-wake method is developed to predict the rotor aerodynamics and wake.The widely-used Farassat 1 Aformulation is adopted to predict the rotor noise.In the coupled method,the Reynolds-average...A coupled Navier-Stokes/free-wake method is developed to predict the rotor aerodynamics and wake.The widely-used Farassat 1 Aformulation is adopted to predict the rotor noise.In the coupled method,the Reynolds-averaged Navier-Stokes(RANS)solver is established to simulate complex aerodynamic phenomena around blade and the tip-wake is captured by a free-wake model without numerical dissipation in the off-body wake zone.To overcome the time-consuming of the coupling strategy in previous studies,a more efficient coupling strategy is presented,by which only the induced velocity on the outer boundary grid need to be calculated.In order to obtain blade control settings,a delta trimming procedure is developed,which is more efficient than traditional trim method in the calculation of Jacobian matrix.Several flight conditions are simulated to demonstrate the validity of the coupled method.Then the rotor noise of operational load survey(OLS)is studied by the developed method as an application and the computational results are shown to be in good agreements with the available experimental data.展开更多
A full-span free-wake method is coupled with an unsteady panel method to accurately predict the unsteady aerodynamics of helicopter rotor blades in hover and forward flight. The unsteady potential-based panel method i...A full-span free-wake method is coupled with an unsteady panel method to accurately predict the unsteady aerodynamics of helicopter rotor blades in hover and forward flight. The unsteady potential-based panel method is used to consider aerodynamics of finite thickness multi-bladed rotors, and the full-span free-wake method is applied to simulating dynamics of rotor wake. These methods are tightly coupled through trailing-edge Kutta condition and by converting doublet-wake panels to full-span vortex filaments. A velocity-field integration technique is also adopted to overcome singularity problem during the interaction between the rotor wake and blades. Helicopter rotors including Caradonna–Tung, UH-60A, and AH-1G rotors, are simulated in hover and forward flight to validate the accuracy of this approach. The predicted aerodynamic loads of rotor blades agree well with available measured data and computational fluid dynamics （CFD） results, and the unsteady dynamics of rotor wake is also well simulated. Compared to CFD, the present method obtains accurate results more efficiently and is suitable to rotorcraft aeroelastic analysis.展开更多
基于非定常面元/时间步进全展自由尾迹建立了旋翼/机身非定常气动干扰分析方法。方法中耦合了非定常面元法和时间步进自由尾迹,以准确模拟旋翼非定常气动力、旋翼尾迹及桨叶对机身的非定常干扰效应。为模拟前飞状态下具有升力的机身,将...基于非定常面元/时间步进全展自由尾迹建立了旋翼/机身非定常气动干扰分析方法。方法中耦合了非定常面元法和时间步进自由尾迹,以准确模拟旋翼非定常气动力、旋翼尾迹及桨叶对机身的非定常干扰效应。为模拟前飞状态下具有升力的机身,将机身离散为汇/偶极子面元,并采用涡线镜像法模拟旋翼尾迹靠近机身表面产生的加速效应。通过计算前飞状态的Maryland、ROBIN(Rotor Body INteraction)旋翼/机身干扰下的非定常压力分布,并与可得到的实验值、CFD计算结果对比,验证方法的准确性。随后分析前飞速度、旋翼与机身距离对旋翼/机身非定气动干扰的影响。计算结果表明机身头部和中部非定常压力主要受桨叶的通过性影响,而机身尾梁主要受尾迹/机身干扰影响,机身非定常气动力频率为桨叶片数的倍频。随前飞速度的增加,机身非定常压力幅值增加,尾梁压力幅值先增加后减小;增加旋翼与机身距离将减小机身和尾梁非定常压力幅值。展开更多
基金supported by the National Basic Research Program of China (973 Program) (No. 2014CB046200)the Jiangsu Province Natural Science Foundation (No.BK2012390)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘With large scale wind turbines,the issue of aerodynamic elastic response is even more significant on dynamic behaviour of the system.Unsteady free vortex wake method is proposed to calculate the shape of wake and aerodynamic load.Considering the effect of aerodynamic load,inertial load and gravity load,the decoupling dynamic equations are established by using finite element method in conjunction of the modal method and equations are solved numerically by Newmark approach.Finally,the numerical simulation of a large scale wind turbine is performed through coupling the free vortex wake modelling with structural modelling.The results show that this coupling model can predict the flexible wind turbine dynamic characteristics effectively and efficiently.Under the influence of the gravitational force,the dynamic response of flapwise direction contributes to the dynamic behavior of edgewise direction under the operational condition of steady wind speed.The difference in dynamic response between the flexible and rigid wind turbines manifests when the aerodynamics/structure coupling effect is of significance in both wind turbine design and performance calculation.
文摘A coupled Navier-Stokes/free-wake method is developed to predict the rotor aerodynamics and wake.The widely-used Farassat 1 Aformulation is adopted to predict the rotor noise.In the coupled method,the Reynolds-averaged Navier-Stokes(RANS)solver is established to simulate complex aerodynamic phenomena around blade and the tip-wake is captured by a free-wake model without numerical dissipation in the off-body wake zone.To overcome the time-consuming of the coupling strategy in previous studies,a more efficient coupling strategy is presented,by which only the induced velocity on the outer boundary grid need to be calculated.In order to obtain blade control settings,a delta trimming procedure is developed,which is more efficient than traditional trim method in the calculation of Jacobian matrix.Several flight conditions are simulated to demonstrate the validity of the coupled method.Then the rotor noise of operational load survey(OLS)is studied by the developed method as an application and the computational results are shown to be in good agreements with the available experimental data.
文摘A full-span free-wake method is coupled with an unsteady panel method to accurately predict the unsteady aerodynamics of helicopter rotor blades in hover and forward flight. The unsteady potential-based panel method is used to consider aerodynamics of finite thickness multi-bladed rotors, and the full-span free-wake method is applied to simulating dynamics of rotor wake. These methods are tightly coupled through trailing-edge Kutta condition and by converting doublet-wake panels to full-span vortex filaments. A velocity-field integration technique is also adopted to overcome singularity problem during the interaction between the rotor wake and blades. Helicopter rotors including Caradonna–Tung, UH-60A, and AH-1G rotors, are simulated in hover and forward flight to validate the accuracy of this approach. The predicted aerodynamic loads of rotor blades agree well with available measured data and computational fluid dynamics （CFD） results, and the unsteady dynamics of rotor wake is also well simulated. Compared to CFD, the present method obtains accurate results more efficiently and is suitable to rotorcraft aeroelastic analysis.
文摘基于非定常面元/时间步进全展自由尾迹建立了旋翼/机身非定常气动干扰分析方法。方法中耦合了非定常面元法和时间步进自由尾迹,以准确模拟旋翼非定常气动力、旋翼尾迹及桨叶对机身的非定常干扰效应。为模拟前飞状态下具有升力的机身,将机身离散为汇/偶极子面元,并采用涡线镜像法模拟旋翼尾迹靠近机身表面产生的加速效应。通过计算前飞状态的Maryland、ROBIN(Rotor Body INteraction)旋翼/机身干扰下的非定常压力分布,并与可得到的实验值、CFD计算结果对比,验证方法的准确性。随后分析前飞速度、旋翼与机身距离对旋翼/机身非定气动干扰的影响。计算结果表明机身头部和中部非定常压力主要受桨叶的通过性影响,而机身尾梁主要受尾迹/机身干扰影响,机身非定常气动力频率为桨叶片数的倍频。随前飞速度的增加,机身非定常压力幅值增加,尾梁压力幅值先增加后减小;增加旋翼与机身距离将减小机身和尾梁非定常压力幅值。
