Experimental and numerical simulation study on forced ventilation and dust removal of coal mine heading surface

In order to study the problems of unreasonable airflow distribution and serious dust pollution in a heading surface,an experimental platform for forced ventilation and dust removal was built based on the similar principles.Through the similar experiment and numerical simulation,the distribution of airflow field in the roadway and the spatial and temporal evolution of dust pollution under the conditions of forced ventilation were determined.The airflow field in the roadway can be divided into three zones:jet zone,vortex zone and reflux zone.The dust concentration gradually decreases from the head to the rear of the roadway.Under the forced ventilation conditions,there is a unilateral accumulation of dust,with higher dust concentrations away from the ducts.The position of the equipment has an interception effect on the dust.The maximum error between the test value and the simulation result is 12.9%,which verifies the accuracy of the experimental results.The research results can provide theoretical guidance for the application of dust removal technology in coal mine.

Investigation of Aegilops umbellulata for stripe rust resistance,heading date,and the contents of iron,zinc,and gluten protein

Aegilops umbellulata(UU)is a wheat wild relative that has potential use in the genetic improvement of wheat.In this study,46 Ae.umbellulata accessions were investigated for stripe rust resistance,heading date(HD),and the contents of iron(Fe),zinc(Zn),and seed gluten proteins.Forty-two of the accessions were classified as resistant to stripe rust,while the other four accessions were classified as susceptible to stripe rust in four environments.The average HD of Ae.umbellulata was significantly longer than that of three common wheat cultivars(180.9 d vs.137.0 d),with the exception of PI226500(138.9 d).The Ae.umbellulata accessions also showed high variability in Fe(69.74-348.09 mg kg^(-1))and Zn(49.83-101.65 mg kg^(-1))contents.Three accessions(viz.,PI542362,PI542363,and PI554399)showed relatively higher Fe(230.96-348.09 mg kg^(-1))and Zn(92.46-101.65 mg kg^(-1))contents than the others.The Fe content of Ae.umbellulata was similar to those of Ae.comosa and Ae.markgrafii but higher than those of Ae.tauschii and common wheat.Aegilops umbellulata showed a higher Zn content than Ae.tauschii,Ae.comosa,and common wheat,but a lower content than Ae.markgrafii.Furthermore,Ae.umbellulata had the highest proportion of γ-gliadin among all the species investigated(Ae.umbellulata vs.other species=mean 72.11%vs.49.37%;range:55.33-86.99%vs.29.60-67.91%).These results demonstrated that Ae.umbellulata exhibits great diversity in the investigated traits,so it can provide a potential gene pool for the genetic improvement of these traits in wheat.

LHD3 Encoding a J-Domain Protein Controls Heading Date in Rice

Heading date is one of the most important agronomic traits of rice,which critically affects rice ecogeographical adaptation,yield and quality.In this study,a late heading date 3(lhd3)mutant was screened from the^(60)Co-γirradiation mutant library.The lhd3 delayed heading date in rice under both short day and long day conditions.Map-based cloning combined with Mutmap strategy was adopted to isolate the causal LHD3 gene.The LHD3 gene encodes a DNA_J domain protein,which was ubiquitously expressed in various plant organs,and dominant expressed in stems and leaves.Subcellular localization analysis showed that LHD3 was localized to nucleus,indicating that LHD3 may interact with other elements to regulate the expression of flowering genes.The transcriptions of the heading activators Ehd1,Hd3a and RFT1 significantly decreased in the lhd3 mutant,suggesting that LHD3 may control the heading date through the Ehd1-Hd3a/RFT1 photoperiodic flowering pathway.The variation and haplotype analyses of the genomic region of LHD3 showed that there were 7 haplotypes in the LHD3 region from 4702 accessions.The haplotypes of LHD3 can be divided into two classes:class a and class b,and the heading dates of these two classes were significantly different.Further study showed that two single nucleotide polymorphisms(SNPs),SNP10(G2100C)in Hap II and SNP3(C861T)in Hap VII,may be the functional sites causing early and late heading in accessions.Nucleotide diversity analysis showed LHD3 had been selected in the indica population,rather than in the japonica population.Therefore,the present study sheds light on the regulation of LHD3 on heading date in rice and suggests that LHD3 is a novel promising new target for rice molecular design and breeding improvement.

A Heading Drift Correction Method for Pedestrian Inertial Positioning

Pedestrian inertial positioning is an effective means when satellites fail. Heading accuracy determines the performance of pedestrian inertial positioning. To realize an accurate positioning, a heading drift correction method was proposed. An in-situ active rotation is performed before autonomous positioning, and the error compensation coefficient of biaxial geomagnetic measurement is obtained by using the ellipse fitting correction method to achieve effective suppression of external environmental geomagnetic interference. The corrected biaxial geomagnetic measurement information is used to directly calculate the heading information and combine it with the peak stride detection method and linear step estimation model to achieve autonomous positioning of pedestrians. To verify the effectiveness and stability of the algorithm, several sets of experiments on the autonomous positioning of pedestrians are carried out in an outdoor environment. The experimental results show that the average deviation between the starting point and the endpoint of the proposed algorithm’s positioning trajectory accounts for 0.95% of the total travel in the 150 m positioning experiments.

Influence of Epistasis and QTL×Environment Interaction on Heading Date of Rice(Oryza sativa L.)

QTLs for heading date of rice （Oryza sativa L.） with additive, epistatic, and QTL × environment （QE） interaction effects were studied using a mixed-model-based composite interval mapping （MCIM） method and a double haploid （DH） population derived from IR64/Azucena in two crop seasons. Fourteen QTLs conferring heading date in rice, which were distributed on ten chromosomes except for chromosomes 5 and 9, were detected. Among these QTLs, eight had single-locus effects, five pairs had double-locus interaction effects, and two single-loci and one pair of double-loci showed QTL × environment interaction effects. All predicted values of QTL effects varied from 1.179 days to 2.549 days, with corresponding contribution ratios of 1.04%-4.84%. On the basis of the effects of the QTLs, the total genetic effects on rice heading date for the two parents and the two superior lines were predicted, and the putative reasons for discrepancies between predicted values and observed values, and the genetic potentiality in the DH population for improvement of heading date were discussed. These results are in agreement with previous results for heading date in rice, and the results provide further information, which indicate that both epistasis and QE interaction are important genetic basis for determining heading date in rice.

QTL Mapping of Heading stage for Photoperiodthermo Sensitive Male Sterile Line BS366 in Wheat

[Objective]The study aimed to map QTLs（Quantitative trait loci）of heading stage for phtopeiod-thermo sensitive male sterile line BS366 in wheat.[Method] A population of 234 doubled haploid derived from the cross between BS366 and Baiyu149 was planted in Beijing and Funan in 2007,respectively.We used composite interval mapping（CIM）method to analyse the QTLs for heading stage.[Result]We detected 15 QTLs for heading stage.8 QTLs were detected in both Beijing and Funan,which were located on 1B,2A,2D,3B（2 loci）,6B（2 loci）and 7B.A single QTL accounted for 2.42%-10.98% of pheotypic varience.[Conclusion] Eight QTLs which were detected under two environments could be applied for marker-assisted breeding and improvement of BS366.The QTL on chromosome 1B was new for heading stage,which enriches the QTL resource.

Investigation on the Sterility Changeover of Male Sterility Line CMS7311 in Heading Chinese Cabbage

Sterility changeover induced by low temperature in male sterility line CMS7311 of heading Chinese cabbage ( Brassica campestris L. ssp. penkinsis) was investigated under constant temperature, day/night alternating temperature in light-growth-incubator and outdoor natural day/night alternating temperature respectively. It showed that the sterility of CMS7311 has significant change with temperature. The constant temperature of 6 - 12 degreesC was suitable to induce the changeover of sterility (CGS) of CMS7311 ; the shortest treatment time for CGS induction at this temperature was 3 d. The significant value of sterility changeover of CMS7311 occurred at the constant temperature of 6 - 9 degreesC after treatment for 6 - 9 d. The intensity of CGS was stronger under constant temperature than under alternate temperature, but the shortest treatment time inducing CGS has no difference between them. When treated for 9 d under the day/night alternating temperature of 11/7 degreesC, its sterility could also turn to normal fertility (near to sterile grade I or zero). In normal condition, the interval from the end of temperature treatment to the beginning of CGS induction was 10 - 16 d. In the condition of natural day/night alternating temperature, the lower limit of temperature for effective CGS induction was at the daily mean temperature ( DMT) of 3. 5 - 6. 8 degreesC, and the shortest treatment time which could induce the sterility changeover was also longer than that under constant temperature, being 11d at DMT of 1.5 - 3.1 degreesC. In addition, for the apical dominance, the flower bud on the first lateral branch showed the CGS 8 - 10 d later than the flower bud on the main stem under the same temperature with the same days of treatment. The intensity of CGS of CMS7311 on the first lateral branch was also weaker than the flower bud on the main stem.

The Inheritance of Early Heading in the Rice Variety USSR5

USSR5, a japonica rice variety from the former Soviet Union, is an extremely early maturing rice variety. To elucidate the genetic basis for its early heading, genetic analysis was carried out by crossing it with a set of major gene nearly isogenic lines （NIL） and QTL-isogenic lines. The early heading of USSR5 was attributed to the presence of photoperiod-insensitive alleles at E1 and Se-1 gene, the photoperiod-sensitive inhibitor gene i-Se-1, and the dominant earliness gene Ef-1. Analysis of a backcrossed population （BCIF1） derived from the cross USSR5 x N22 indicated that two quantitative trait loci （QTL） for early heading were located on chromosomes 7 and 8, accounting for 27.4% and 11.2% of the phenotypic variance, respectively, with both early alleles originating from USSRS. From an F2 population of the same cross, early heading QTLs were detected on chromosomes 1, 2, 7, 9, and 10, with individual QTL accounting for between 4.1% and 15.4% of the phenotypic variance. Early heading alleles at four of these five QTLs originated from USSRS. A comparison of chromosomal locations suggests that one of these QTLs may be identical with the known gene Hd4 （E1）. The relationship between the other QTLs and known genes for heading date are not clear. USSR5 is a promising source for propagating earliness for the development of improved early heading rice varieties.

Effect of Extreme Natural High Temperature on Seed Setting Rate of Rice(Oryza sativa L.) at Heading and Flowering Stage

The seed setting rates of total 198 rice cultivars （lines） at heading and flowering stage were investigated under the condition of extreme natural high tem- perature in 2013 so as to analyze the effect of extreme natural high temperature on seed setting rate of different rice cultivar （line）. The results showed that the contin- uous high temperature showed certain effects on the seed setting rates of tested materials, and significant differences were shown in seed setting rate among differ- ent rice cultivars （lines）. The seed setting rates differed significantly among indica F1 hybrids derived from different sterile and restorer lines, indicating that the sterile and restorer lines had great effects on heat tolerances of different F~ hybrids. The cor- relation analysis showed that the seed setting rates of conventional indica restorer lines and conventional japonica rice cultivars （lines） were negatively related to the daily highest temperature （P〉0.05）, and the seed setting rates of indica F1 hybrids were positively related to the seed setting rates of their restorer lines. Total four in- dica restorer lines, including Ninghuiguangkangzhan, Shuhui 527, Chenghui 3203 and Xianyin-8, and four new japonica rice cultivars （lines）, including Wuyinjinghui （B2）, Nanjing 4//W3660/Nanjing 44 （B12） and Wuyun 2330/JD6011 （B22） were pre- liminarily screened, and their seed setting rates were all close to the normal level （90%）. The screened rice cultivars （lines） showed higher heat tolerances.

Influence Factors for Safety Full Heading of Machine-transplanted Rice Seedlings in Cool-warm Rice Area

[Objective] This study was conducted to discuss influence factors for safety full heading of machine-transplanted rice seedlings in cool-warm rice area. [Method] Effects of variety, seedling age and nitrogen fertilizer dosage and strategy of machine-transplanted seedlings on safety full heading of machine-transplanted seedlings were investigated. [Result] During mechanized rice production in coolwarm rice area, mid-early-maturing cold-resistant varieties with growth periods no longer than 180 d could selected, and seedling age could controlled within 30-35 d; and the total amount of pure nitrogen should be less than 300 kg/hm^2, and the proportion of nitrogen fertilizer applied in later stages should be properly reduced. [Conclusion] Under this condition, safety full heading of rice is ensured, and the target yield is realized.

Applying the Principle of Dynamic Equivalence in the Translation of the Heading of News Report

Nida's famous notion of Dynamic Equivalence in translation process is characterized by three stages - analysis, transfer and restructuring, which are explained in detail. The application of these principles are illustrated by providing step-by-step explanation on the translation process of headings of two news reports, which are selected from Far Eastern Economic Review.

A chromosome-level reference genome of nonheading Chinese cabbage[Brassica campestris(syn.Brassica rapa)ssp.chinensis]

Non-heading Chinese cabbage(NHCC)is an important leafy vegetable cultivated worldwide.Here,we report the first high-quality,chromosome-level genome of NHCC001 based on PacBio,Hi-C,and Illumina sequencing data.The assembled NHCC001 genome is 405.33 Mb in size with a contig N50 of 2.83 Mb and a scaffold N50 of 38.13 Mb.Approximately 53%of the assembled genome is composed of repetitive sequences,among which long terminal repeats(LTRs,20.42%of the genome)are the most abundant.Using Hi-C data,97.9%(396.83 Mb)of the sequences were assigned to 10 pseudochromosomes.Genome assessment showed that this B.rapa NHCC001 genome assembly is of better quality than other currently available B.rapa assemblies and that it contains 48,158 protein-coding genes,99.56%of which are annotated in at least one functional database.Comparative genomic analysis confirmed that B.rapa NHCC001 underwent a whole-genome triplication(WGT)event shared with other Brassica species that occurred after the WGD events shared with Arabidopsis.Genes related to ascorbic acid metabolism showed little variation among the three B.rapa subspecies.The numbers of genes involved in glucosinolate biosynthesis and catabolism were higher in NHCC001 than in Chiifu and Z1,due primarily to tandem duplication.The newly assembled genome will provide an important resource for research on B.rapa,especially B.rapa ssp.chinensis.

cDNA-AFLP analysis reveals differential gene expression in incompatible interaction between infected non-heading Chinese cabbage and Hyaloperonospora parasitica

Non-heading Chinese cabbage(Brassica rapa ssp.chinensis)is one of the main green leafy vegetables in the world,especially in China,with significant economic value.Hyaloperonospora parasitica is a fungal pathogen responsible for causing downy mildew disease in Chinese cabbage,which greatly affects its production.The objective of this study was to identify transcriptionally regulated genes during incompatible interactions between non-heading Chinese cabbage and H.parasitica using complementary DNA-amplified fragment length polymorphism(cDNA-AFLP).We obtained 129 reliable differential transcript-derived fragments(TDFs)in a resistant line‘Suzhou Qing’.Among them,121 upregulated TDFs displayed an expression peak at 24–48 h post inoculation(h.p.i.).Fifteen genes were further selected for validation of cDNA-AFLP expression patterns using quantitative reverse transcription PCR.Results confirmed the altered expression patterns of 13 genes(86.7%)revealed by the cDNA-AFLP.We identified four TDFs related to fungal resistance among the 15 TDFs.Furthermore,comparative analysis of four TDFs between resistant line‘Suzhou Qing’and susceptible line‘Aijiao Huang’showed that transcript levels of TDF14(BcLIK1_A01)peaked at 48 h.p.i.and 25.1-fold increased in the resistant line compared with the susceptible line.Similarly,transcript levels of the other three genes,TDF42(BcCAT3_A07),TDF75(BcAAE3_A06)and TDF88(BcAMT2_A05)peaked at 24,48 and 24 h.p.i.with 25.1-,100-and 15.8-fold increases,respectively.The results suggested that the resistance genes tended to transcribe at higher levels in the resistance line than in the susceptible line,which may provide resistance against pathogen infections.The present study might facilitate elucidating the molecular basis of the infection process and identifying candidate genes for resistance improvement of susceptible cultivars.

Hydrogen sulfide promotes flowering in heading Chinese cabbage by S-sulfhydration of BraFLCs

Heading Chinese cabbage(Brassica rapa L.syn.B.campestris L.ssp.chinensis Makino var.pekinensis(Rupr.)J.Cao et Sh.Cao)is a cruciferous Brassica vegetable that has a triplicate genome,owing to an ancient genome duplication event.It is unclear whether the duplicated homologs have conserved or diversi fied functions.Hydrogen sulfide(H_(2)S)is a plant gasotransmitter that plays important physiological roles in growth,development,and responses to environmental stresses.The modification of cysteines through S-sulfhydration is an important mechanism of H_(2)S,which regulates protein functions.H?S promotes flowering in Arabidopsis and heading Chinese cabbage.Here we investigated the molecular mechanisms of H_(2)S used to promote flowering in the latter.Four,five,and four BraFLC,BraSOC I,and BraFT homologs were identi fi ed in heading Chinese cabbage.Different BraFLC proteins were bound to different CArG boxes in the promoter regions of the BraSOC I and BraFT homologs,producing different binding patterns.Thus,there may be functionally diverse BraFLC homologs in heading Chinese cabbage.Exogenous H_(2)S at 100μmol L^(-1) significantly promoted flowering by compensating for insuf fi cient vernalization.BraFLC 1 and BraFLC_(3) underwent S-sulfhydration by H_(2)S,after which their abilities to bind most BraSOC I or BraFT promoter probes weakened or even disappeared.These changes in binding ability were consistent with the expression pattern of the BraFT and BraSOC I homologs in seedlings treated with H_(2)S.These results indicated that H_(2)S signaling regulates flowering time.In summary,H_(2)S signaling promoted plant flowering by weakening or eliminating the binding abilities of BraFLCs to downstream promoters through S-sulfhydration.

Avoidance of Linkage Drag Between Blast Resistance Gene and the QTL Conditioning Spikelet Fertility Based on Genotype Selection Against Heading Date in Rice

Previous study showed that a linkage drag between a blast resistance gene Pi25（t） and QTLs conditioning spikelet fertility （qSF-6） and number of filled grains per panicle （qNFGP-6） was detected on the short arm of chromosome 6. A larger population was used for further verification, and the results confirmed the linkage drag between the blast resistance gene and QTL conditioning spikelet fertility, other than QTL conditioning number of filled grains per panicle. Breakdown or avoidance of the linkage drag could be achieved by selection against the genotype background of a heading-date gene （qHD-7） that resided in the region between RM2 and RM214 on chromosome 7. For further validation, two lines with almost identical genotypes on all chromosomal regions except the Pi25（t） region on chromosome 6 were chosen to develop a new population The results showed that qSF-6 could be further subdivided into qSF-6-1 and qSF-6-2. When the genotype of the region between RM2 and RM214 was from rice variety Zhong 156, the linkage drag between Pi25（t） and qSF-6-2 was detected and the allele of qSF-6-2 from rice variety Gumei 2 reduced the spikelet fertility. When the genotype of the region between RM2 and RM214 was from Gumei 2, no linkage drag was detected. This indicates that the linkage drag between the blast resistance gene and the QTL conditioning spikelet fertility could be broken down or avoided under a certain background genotype selection against heading-date and provides a marker aided solution for high level of blast resistance and yield breeding in rice and other crops as well.

Characterization of the Main Effects, Epistatic Effects and Their Environmental Interactions of QTL on the Genetic Basis of Plant Height and Heading Date in Rice

Main-effect QTL, epistatic effects and their interactions with environment are important genetic components of quantitativetraits. In this study, we analyzed the QTL, epistatic effects and QTL by environment interactions (QE) underlying plantheight and heading date, using a doubled-haploid ( DH) population consisting of 190 lines from the cross between anindica parent Zhenshan 97 and a japonica parent Wuyujing 2, and tested in two-year replicated field trials. A geneticlinkage map with 179 SSR (simple sequence repeat) marker loci was constructed. A mixed linear model approach wasapplied to detect QTL, digenic interactions and QEs for the two traits. In total, 20 main-effect QTLs, 9 digenic interactionsinvolving 18 loci, and 5 QTL by environment interactions were found to be responsible for the two traits. No interactionswere detected between the digenic interaction and environment. The amounts of variations explained by QTLs of maineffect were 53.9% for plant height and 57.8% for heading date, larger than that explained by epistasis and QEs. However,the epistasis and QE interactions sometimes accounted for a significant part of phenotypic variation and should not bedisregarded.

Theoretical and numerical analysis of coal dust separated by centrifugal force for working and heading faces

In order to meet engineering needs of Chinese underground coal mines,a new dust-collecting fan,a device of dust separated by centrifugal force in driven cyclone passageway(DCCP)was designed.In centrifugal dust removal section(CDRS)of DCCP,a general equation is derived from the principle of force equilibrium.According to CDRS structure parameters and fan running parameters,the general equation is simplified,and the simplest equation is calculated numerically by MATLAB.The calculation results illustrate that increasing quantity of air current is against dust removal,but it is beneficial to dust removal by increasing the radius of driven spiral blade and increasing the particle diameter of coal dust.The conclusions show that the dust-collecting structure parameters coupled with the fan running parameters is a novel optimization approach to dust-collection fan for working and heading faces,which is especially suitable for Chinese underground mines.

Quantitative Trait Loci for Heading Date and Their Relationship with Genetic Control of Yield Traits in Rice (Oryza sativa)

Grain yield and heading date are key factors determining the commercial potential of a rice variety. Mapping of quantitative trait loci （QTLs） in rice has been advanced from primary mapping to gene cloning, and heading date and yield traits have always attracted the greatest attention. In this review, genomic distribution of QTLs for heading date detected in populations derived from intra-specific crosses of Asian cultivated rice （Oryza sativa） was summarized, and their relationship with the genetic control of yield traits was analyzed. The information could be useful in the identification of QTLs for heading date and yield traits that are promising for the improvement of rice varieties.

Heading control method and experiments for an unmanned wave glider

The control system designing of unmanned wave glider(UWG) is challenging since the control system is weak maneuvering, large time-lag and large disturbance, which is difficult to establish accurate mathematical model. The control system for the "Ocean Rambler" UWG is studied in this work. A heading control method based on S-surface controller is designed. For the "rudder zero drift" problem in trials, an improved S-surface control method based on rudder angle compensation is proposed, which can compensate the adverse effects from environmental forces and installation error. The tank test and sea trial results prove that the proposed control method has favorable control performance, and the feasibility and reliability of the designed control system are also verified.

Plant Ideotype at Heading for Super High-Yielding Rice in Double-Cropping System in South China

The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.