A Generalized Array Factor for Time-Modulated Hexagonal Based Antenna Array Geometry With Novel Trapezoidal Switching

The concept of the time-modulated array has been emerging as an alternative to the complex phase shifters,which lowers the cost of the array feeding network due to the utilization of radio frequency(RF)switches.The various forms of hexagonal antenna array geometries can be used for applications like surveillance tracking in phased array radar and wireless communication systems.This work proposes the generalized array factor(AF)for the hexagonal antenna array geometry based on time modulation.The time modulation in generalized hexagonal geometry can maintain the fixed static amplitude excitation,giving more flexibility over time.Furthermore,a novel trapezoidal switching function is also proposed and applied to the generalized array factor to enable future researchers to use this array factor in the field of advancement to observe how switching schemes like trapezoidal and rectangular affect the array pattern's side lobe level(SLL).The generalized equation can be utilized for the analysis and synthesis of radiation characteristics of the time-modulated hexagonal array(TMHA),time-modulated concentric hexagonal array(TMCHA),time-modulated hexagonal cylindrical array(TMHCA),and time-modulated hexagonal concentric cylindrical array(TMHCCA).The numerical result illustrates the generation of AF of time-modulated hexagonal structures and also shows that the trapezoidal switching sequence outperforms the rectangular switch using the cat swarm optimization(CSO)approach.

Elastic Field of a Straight Dislocation in One Dimensional Hexagonal Quasicrystals *L

Aim To study dislocation elasticity theory in quasicrystals. Methods A dislocation was separated into pure edge part and pure screw part and their superposition was used to find the elastic field. Results and Conclusion The elastic solution of a straight dislocation parallel to the quasiperiodic axis in 1D hexagonal quasicrystals was obtained and the generalized Peach Koehler force on a dislocation in quasicrystals was given.

Synthesis and photoluminescence properties of single-crystal ZnO hexagonal pyramids by PEG400-assisted thermal decomposition route

Large-scale synthesis of ZnO hexagonal pyramids was achieved by a simple thermal decomposition route of precursor at 240 oC in the presence of PEG400. The precursor was obtained by room-temperature solid-state grinding reaction between Zn（CH3COO）2-2H2O and Na2CO3. Crystal structure and morphology of the products were analyzed and characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and high-resolution transmission electron microscopy （HRTEM）. The results of further experiments show that PEG400 has an important role in the formation of ZnO hexagonal pyramids. Difference between the single and double hexagonal pyramid structure may come from the special thermal decomposition reaction. The photoluminescence （PL） spectra of ZnO hexagonal pyramids exhibit strong near-band-edge emission at about 386 nm and weak green emission at about 550 nm. The Raman-active vibration at about 435 cm-1 suggests that the ZnO hexagonal pyramids have high crystallinity.

Super Performance InGaP/GaAs Heterojunction Bipolar Transistor with Hexagonal Emitter

Super performance InGaP/GaAs heterojunction bipolar transistors (HBTs) with hexagonal emitter are described.The fabricated HBT shows excellent DC characteristics with low V CE offset voltage (<0 15V) and low knee voltage (<0 5V).Over 14V of the collector base breakdown voltage BV CBO and over 9V of the collector emitter breakdown voltage BV CEO are obtained.For a self aligned InGaP/GaAs HBT with 2μm×10μm emitter area,the f T is extrapolated to 92GHz and f max is extrapolated to 105GHz.These great values are obtained due to the hexagonal emitter and laterally etched undercut (LEU) of collector,indicating the great potential of InGaP/GaAs HBTs for high speed digital circuit and microwave power applications.

Replacement of Flake Graphite in Aluminacarbon Refractories by Hexagonal Boron Nitride

Three kinds of composite alumina refractories were prepared with tabular alumina （3-1 and 1-0 mm） as aggregates,tabular alumina powder,α-Al2 O3 micropowder,and Si powder as matrix,adding 3 mass％ hexagonal boron nitride （h-BN）,3 mass％ flake graphite and 10 mass％ flake graphite,respectively.Cold physical properties,hot modulus of rupture,oxidation resistance,thermal shock resistance and slag corrosion resistance of the specimens were compared.The results show that：（1） physical properties and hot modulus of rupture of Al2 O3-h-BN refractories are slightly different from those of low carbon Al2 O3-C refractories,but better than those of traditional Al2 O3-C refractories with 10 mass％ graphite ; （2） Al2 O3-h-BN refractories have better thermal shock resistance and oxidation resistance than the carbon containing refractories,while similar slag resistance with low carbon Al2 O3-C refractories ; （3） h-BN can replace flake graphite as a starting material for the preparation of composite alumina refractories,considering the overall properties of the material.

Exact analytic solutions for an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal

Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors （SIFs） for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.

Simulation on damage effectiveness of hexagonal prism aimable warhead with multi-point synchronous initiations

In order to study the impacts of warhead geometry and initiation pattern on the lethality of aimable warhead, multi-point synchronous initiated hexagonal prism and cylindrical warheads were compared through numerical simulation, combined with theoretical formulas of fragment decelera- tion and target plugging. Enhancements of fragment velocity, kinetic energy and density toward the target and target destructions were analyzed. The results show that hexagonal prism warhead can produce dense fragment beams and enhance average velocity and kinetic energy with asymmetric eight-point initiation by 24. 13% and 54. 52% respectively, which are higher than those of the isomet- ric or same weight cylindrical warhead. The effective fragments are still relatively concentrated in an area of 8 m × 2 m for the hexagonal prism warhead when the distance between warhead and target is 40 m.

Electronic structure and flotation behavior of monoclinic and hexagonal pyrrhotite

Electronic structures of monoclinic and hexagonal pyrrhotite were studied using density functional theory method,together with their flotation behavior. The main contribution of monoclinic pyrrhotite is mainly from Fe 3d, while that of hexagonal pyrrhotite is from Fe 3d, Fe 3p and S 3s. The hexagonal pyrrhotite is more reactive than monoclinic pyrrhotite because of large density of states near the Fermi level. The hexagonal pyrrhotite shows antiferromagnetism. S—Fe bonds mainly exist in monoclinic pyrrhotite as the covalent bonds, while hexagonal pyrrhotite has no covalency. The main contributions of higest occupied molecular orbital(HOMO) and lowest unoccupied molecular obital(LUMO) for monoclinic pyrrhotite come from S and Fe. The main contribution of HOMO for hexagonal pyrrhotite comes from Fe, while that of LUMO comes from S. The coefficient of Fe atom is much larger than that of S atom of HOMO for hexagonal pyrrhotite, which contributes to the adsorption of Ca OH+ on the surface of hexagonal pyrrhotite when there is lime. As a result, lime has the inhibitory effect on the floatation of hexagonal pyrrhotite and the coefficient of Fe is very close to that of S for monoclinic pyrrhotite. Therefore, the existence of S prevents the adsorption of Ca OH+on the surface of monoclinic pyrrhotite, which leads to less inhibitory effect on the flotation of monoclinic pyrrhotite.

Hexagonal boron nitride adsorbent: Synthesis, performance tailoring and applications

Hexagonal boron nitride(h-BN),with unique structural and properties,has shown enormous potentitoward variety of possible applications.By virtue of partially-ionic character of BN chemical bonds anusually large specific surface area,h-BN-related nanostructures exhibit appealing adsorption propertiewhich can be widely applied for separation and purification towards energy and environment treatmenIn this review,recent progress in designing h-BN micro,nano-structure,controlled synthesis,performancoptimizing as well as energy and environment-related adsorption applications are summarized.Strategieto tailor the h-BN can be classified as morphology control,element doping,defect control and surfacmodification,focusing on how to optimize the adsorption performance.In order to insight the intrinsimechanism of tuning strategies for property optimization,the significant adsorption applications of h-Btowards hydrogen storage,CO2 capture,pollutants removal from water and adsorption desulfurization arpresented.

The interaction between a screw dislocation and a wedge-shaped crack in one-dimensional hexagonal piezoelectric quasicrystals

Based on the fundamental equations of piezoelasticity of quasicrystal material,we investigated the interaction between a screw dislocation and a wedge-shaped crack in the piezoelectricity of one-dimensional hexagonal quasicrystals.Explicit analytical solutions are obtained for stress and electric displacement intensity factors of the crack,as well as the force on dislocation.The derivation is based on the conformal mapping method and the perturbation technique.The influences of the wedge angle and dislocation location on the image force are also discussed.The results obtained in this paper can be fully reduced to some special cases already available or deriving new ones.

Synthesis of a novel hexagonal porous TT-Nb2O5 via solid state reaction for high-performance lithium ion battery anodes

Hexagonal porous Nb2O5 was synthesized for the first time via a facile solid-state reaction.The structure and electrochemical properties have been optimized through tuning heating temperature.X-ray diffraction results indicate that pseudo hexagonal Nb2O5(TT-Nb2O5)and orthorhombic Nb2O5 have been synthesized at different temperatures.Hexagonal sheet and porous structure of Nb2O5 were characterized by scanning electron microscopy and N2-adsorption-desorption isotherms.The as-prepared TT-Nb2O5(heated at 600℃)shows the best performance with a remarkable charge capacity of 178 mA∙h/g at 0.2C,which is higher than that of T-Nb2O5.Even at 20℃,TT-Nb2O5 offers unprecedented rate capability up to 86 mA∙h/g.The high rate capacity is due to pseudocapacitive Li+intercalation mechanism of TT-Nb2O5.The reported results demonstrate that Nb2O5 with good crystal structure and high specific surface area is a powerful composite design for high-rate and safe anode materials.

Crushing analysis and multi-objective optimization of bitubular hexagonal columns with ribs

In order to improve the crashworthiness of thin-walled columns, the energy absorption characteristics of three columns under quasi-static axial crushing loads were analyzed through LS-DYNA. Numerical results show that the energy absorption capability of the bitubular hexagonal columns with middle to middle(MTM) ribs is the best, followed by the bitubular hexagonal columns with corner to corner(CTC) ribs and the bitubular hexagonal columns without(NOT) ribs, respectively. Then, the MTM rib was optimized by using multi-objective particle swarm optimization algorithm. Through the analysis of the Pareto front for specific energy absorption(SEA, A_(se)) and peak crushing force(PCF, F_(pc)), it is found that there is a vertex on the Pareto front. The vertex has the design parameters of t_1=1.2 mm, t_2=1.2 mm, A_(se)=11.3729 k J/kg, F_(pc)=235.8491 kN. When the PCF is in a certain size, on the left of the vertex, the point with t_2=1.2 mm has the biggest SEA, meanwhile on the right of the vertex, the point with t_1=1.2 mm has the biggest SEA. Finally, the global sensitivity analysis was conducted to investigate the effect of two design parameters. The result is obtained that both SEA and PCF for MTM are more sensitive to t_1 rather than t_2 in the design domain.

Characterization of a Y-type hexagonal ferrite-based frequency tunable microwave absorber

A Y-type hexaferrite rod with the composition of Ba2COl.8Cuo.2Fe12022 was presented as an absorbing material with high absorb- anee. Its high absorbance and wide absorption band result from ferromagnetic resonance （FMR） that is self-biased by strong shape and mag- netocrystaUine anisotropy fields. Around the FMR frequency the specimen of the ferrite rods exhibits very high absorbance and the FMR frequency can be tuned by the rod dimension. In addition to the high absorbance and the wide tunable absorption band, the microwave ab- sorber has another advantage of light weight due to the use of the ferrite rods instead of ferrite slabs.

Interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional hexagonal quasicrystal with piezoelectric effect

The interaction between a screw dislocation and an elliptical hole with two asymmetrical cracks in a one-dimensional(1 D) hexagonal quasicrystal with piezoelectric effect is considered. A general formula of the generalized stress field, the field intensity factor, and the image force is derived, and the special cases are discussed. Several numerical examples are given to show the effects of the material properties and the dislocation position on the field intensity factors and the image forces.

Hexagonal hematite platelets synthesized from pyrite cinders by hydrothermal process

Well-crystallized hexagonal hematite （α-Fe2O3） platelets were synthesized by hydrothermal process, using a highly concentrated ferric hydroxide as precursor. The precursor was prepared by adding ammonia to the ferric sulfate solution which was obtained by leaching pyrite cinders with sulfuric acid. Structure and morphology of the synthesized products were investigated by X-ray diffraction, scanning electron microscope, transmission electron microscope and selected area electron diffraction. The results reveal that the reaction temperature has significant effects on the structure, size and shape of the synthesized hematite particles. Typical hexagonal hematite platelets, about 0.4-0.6 μm in diameter and 0.1 μm in thickness, were prepared at 230 ℃ for 0.5 h. Al^3＋, contained in the sulfuric acid leaching solution as an impurity, plays an extremely important role in the formation of hexagonal hematite. In addition, a possible mechanism about the formation of hexagonal hematite platelets was proposed.

A study of transition from n-to p-type based on hexagonal WO3 nanorods sensor

Hexagonal WO3 nanorods are fabricated by a facile hydrothermal process at 180 ℃ using sodium tungstate and sodium chloride as starting materials. The morphology, structure, and composition of the prepared nanorods are studied by scanning electron microscopy, X-ray diffraction spectroscopy, and energy dispersive spectroscopy. It is found that the agglomeration of the nanorods is strongly dependent on the PH value of the reaction solution. Uniform and isolated WO3 nanorods with diameters ranging from 100 nm-150 nm and lengths up to several micrometers are obtained at PH = 2.5 and the nanorods are identified as being hexagonal in phase structure. The sensing characteristics of the WO3 nanorod sensor are obtained by measuring the dynamic response to NO2 with concentrations in the range 0.5 ppm-5 ppm and at working temperatures in the range 25 ℃-250 ℃. The obtained WO3 nanorods sensors are found to exhibit opposite sensing behaviors, depending on the working temperature. When being exposed to oxidizing NO2 gas, the WO3 nanorod sensor behaves as an n-type semiconductor as expected when the working temperature is higher than 50 ℃, whereas, it behaves as a p-type semiconductor below 50 ℃. The origin of the n- to p-type transition is correlated with the formation of an inversion layer at the surface of the WO3 nanorod at room temperature. This finding is useful for making new room temperature NO2 sensors based on hexagonal WO3 nanorods.

A novel adjustable multiple cross-hexagonal search algorithm for fast block motion estimation

In this paper,we propose a novel adjustable multiple cross-hexagonal search(AMCHS) algorithm for fast block motion estimation. It employs adjustable multiple cross search patterns(AMCSP) in the first step and then uses half-way-skip and half-way-stop technique to determine whether to employ two hexagonal search patterns(HSPs) subsequently. The AMCSP can be used to find small motion vectors efficiently while the HSPs can be used to find large ones accurately to ensure prediction quality. Simulation results showed that our proposed AMCHS achieves faster search speed,and provides better distortion performance than other popular fast search algorithms,such as CDS and CDHS.

TIME-HARMONIC DYNAMIC GREEN'S FUNCTIONS FOR ONE-DIMENSIONAL HEXAGONAL QUASICRYSTALS

Quasicrystals have additional phason degrees of freedom not found in conventional crystals. In this paper, we present an exact solution for time-harmonic dynamic Green＇s function of one-dimensional hexagonal quasicrystals with the Laue classes 6/mh and 6/mhmm. Through the introduction of two new functions φ and ψ, the original problem is reduced to the determination of Green＇s functions for two independent Helmholtz equations. The explicit expressions of displacement and stress fields are presented and their asymptotic behaviors are discussed. The static Green＇s function can be obtained by letting the circular frequency approach zero.

N-hydroxyphthalimide anchored on hexagonal boron nitride as a metal-free heterogeneous catalyst for deep oxidative desulfurization

A metal-free N-hydroxyphthalimide/hexagonal boron nitride(NHPI/h-BN)catalytic system was developed for deep oxidative desulfurization(ODS)of fuel oils.Detailed experiments find that the heterogenization process of loading NHPI on h-BN not only benefits to the dispersion and utilization of NHPI,but also can significantly promote the catalytic performance.By employing NHPI/h-BN as the catalyst,azodiisobutyronitrile(AIBN)as the metal-free initiator,a 95%conversion of dibenzothiophene(DBT)can be acquired under the reaction conditions of 120°C and atmospheric pressure with molecular oxygen(O_(2))as oxidant.Moreover,the heterogenization is convenient for the regeneration of the catalyst with>94%DBT conversion after being recycled seven times.Characterizations illustrate that the promoted catalytic activity along with the regenerability originate from the interactions between NHPI and h-BN.The catalytic mechanism study shows that molecular oxygen is readily activated by the NHPI/h-BN to form a superoxide radical(O_(2)^(·-)),which oxidize DBT to DBTO2 for desulfurization.

Synthesis of hexagonal barium ferrite nanoparticle by sol-gel method

M-type Ba hexaferrites were successfully synthesized by sol-gel method.Several synthesizing factors,such as pH value,citric acid/metal ion ratio,and dispersion agent were mainly discussed.Fine and pure powders of BaFe_(12)O_(19)were optimally synthesized under the conditions of the pH value is 7 and citric acid/metal ion ratio is 3.The X-ray diffraction analysis demonstrates that no impurity is observed in the synthesized powders after presintered at 450℃and calcinated at 1100℃.SEM observations indicate that the size of the synthesized BaFe_(12)O_(19)powders is small and uniform distribution.It can also be learned from SEM that the co-synthesizing sol-gel method can be in favor of the formation of finer particles.