In order to improve the detonation characteristics of RDX,a RDX-based composite explosive with TiH_(2)powders was prepared.The effects of content and particle size of TiH_(2)powders on thermal safety,shock wave parame...In order to improve the detonation characteristics of RDX,a RDX-based composite explosive with TiH_(2)powders was prepared.The effects of content and particle size of TiH_(2)powders on thermal safety,shock wave parameters and thermal damage effects of RDX-based composite explosive were studied with the C80 microcalorimeter,air blast experiment system and colorimetric thermometry method.Experimental results showed that TiH_(2)powders could enhance the thermal stability of RDX-based composite explosive and increase its ultimate decomposition heat.The content and particle size of TiH_(2)powders also had significant effects on the thermal safety,detonation velocity,shock wave parameters,fireball temperature and duration of RDX-based composite explosives.Furthermore,the differences of TiH_(2)and Ti powders on the detonation energy output rules of RDX-based composite explosives were also compared,showing that TiH_(2)powders had better influences on improving the explosion power and thermal damage effect of RDX-based composite explosives than Ti powders,for the participation of free H_(2)released by TiH_(2)powders in the detonation process.TiH_(2)powders have important research values as a novel energetic additive in the field of military composite explosives.展开更多
为了探究含能材料在紫外激光辐照下的烧蚀特点及规律,采用光学显微镜、扫描电子显微镜以及微粒计数器等表征手段,分别对不同质量、不同厚度的黑索今(research department explosive,RDX)含能材料在紫外激光(波长为355 nm)辐照下的烧蚀...为了探究含能材料在紫外激光辐照下的烧蚀特点及规律,采用光学显微镜、扫描电子显微镜以及微粒计数器等表征手段,分别对不同质量、不同厚度的黑索今(research department explosive,RDX)含能材料在紫外激光(波长为355 nm)辐照下的烧蚀尺寸、烧蚀形貌以及冲击波引起的材料喷溅等特性进行表征与统计。研究结果表明,随着入射激光能量密度的不断增大,含能材料的横向烧蚀面积和纵向烧蚀深度均先增大后减小,且最终烧蚀面积保持在光斑面积大小,烧蚀深度保持在60μm左右;对于激光烧蚀诱导的含能材料微粒喷溅,中尺寸的微粒数量呈现先增多后减少的趋势,而大尺寸的微粒数量却一直减少。与大光斑激光辐照相比较,在相同能量密度下,小光斑辐照时的横向烧蚀面积更小,烧蚀致微粒喷溅的作用更强。展开更多
In order to obtain high-quality spherical RDX crystal particles,the RDX crystals were suspended in a mixed solvent of cyclohexanone and cyclohexane,subsequently a solvent etching study was carried out under the action...In order to obtain high-quality spherical RDX crystal particles,the RDX crystals were suspended in a mixed solvent of cyclohexanone and cyclohexane,subsequently a solvent etching study was carried out under the action of vibration/acoustic flow coupled flow field,which generated by resonance acoustic mixing.The effects of solvent ratio,temperature,acceleration and experiment time on morphology as well as particle size of RDX crystals were studied.Not only were the morphology,particle size distribution and crystal form of RDX crystals determined,but also the thermal decomposition performance and mechanical sensitivity of spherical RDX were examined and discussed.Results indicated that under the process of solvent/non-solvent volume ratio at 1:2,temperature of 40℃,acceleration of 40 g and experiment time of 4 h,α-type RDX crystal with sphericity of 0.92 can be obtained.Furthermore,the median particle size(D_(50))of spherical RDX crystals is 215.8 μm with a unimodal particle size distribution(size span 1.34).For one thing,the thermal decomposition peak temperature of spherical RDX is about 2.5℃ higher than that of raw RDX,and apparent activation energy reaches 444.68 kJ/mol.For another thing,impact sensitivity and friction sensitivity of spherical RDX are 18.18% and 33.33% lower than that of raw RDX,respectively.It demonstrates that safety of spherical RDX under thermal,impact and friction stimuli has been improved.展开更多
The properties of the combustion and deflagration to detonation transition(DDT)of Al/Fe_(2)O_(3)/RDX hybrid nanocomposites,a type of potentially novel lead-free primary explosives,were tested in weakly confined condit...The properties of the combustion and deflagration to detonation transition(DDT)of Al/Fe_(2)O_(3)/RDX hybrid nanocomposites,a type of potentially novel lead-free primary explosives,were tested in weakly confined conditions,and the interaction of Al/Fe_(2)O_(3)nanothermite and RDX in the DDT process was studied in detail.Results show that the amount of the Al/Fe_(2)O_(3)nanothermite has a great effect on the DDT properties of Al/Fe_(2)O_(3)/RDX nanocomposites.The addition of Al/Fe_(2)O_(3)nanothermite to RDX apparently improves the firing properties of RDX.A small amount of Al/Fe_(2)O_(3)nanothermite greatly increases the initial combustion velocity of Al/Fe_(2)O_(3)/RDX nanocomposites,accelerating their DDT process.When the contents of Al/Fe_(2)O_(3)nanothermite are less than 20 wt%,the DDT mechanisms of Al/Fe_(2)O_(3)/RDX nanocomposites follow the distinct abrupt mode,and are consistent with that of RDX,though their DDT processes are different.The RDX added into the Al/Fe_(2)O_(3)nanothermite increases the latter's peak combustion velocity and makes it generate the DDT when the RDX content is at least 10 wt%.RDX plays a key role in the shock compressive combustion,the formation and the properties of the DDT in the flame propagation of nanocomposites.Compared with RDX,the fast DDT of Al/Fe_(2)O_(3)/RDX nanocomposites could be obtained by adjusting the chemical constituents of nanocomposites.展开更多
基金the National Natural Science Foundation of China(Grant Nos.11972046,12272001)the Outstanding Youth Project of Natural Science Foundation of Anhui Province(Grant No.2108085Y02)+1 种基金Anhui University of Science and Technology Postgraduate Innovation Fund(Grant No.2022CX2108)the authors would like to thank these foundations for the financial supports.
文摘In order to improve the detonation characteristics of RDX,a RDX-based composite explosive with TiH_(2)powders was prepared.The effects of content and particle size of TiH_(2)powders on thermal safety,shock wave parameters and thermal damage effects of RDX-based composite explosive were studied with the C80 microcalorimeter,air blast experiment system and colorimetric thermometry method.Experimental results showed that TiH_(2)powders could enhance the thermal stability of RDX-based composite explosive and increase its ultimate decomposition heat.The content and particle size of TiH_(2)powders also had significant effects on the thermal safety,detonation velocity,shock wave parameters,fireball temperature and duration of RDX-based composite explosives.Furthermore,the differences of TiH_(2)and Ti powders on the detonation energy output rules of RDX-based composite explosives were also compared,showing that TiH_(2)powders had better influences on improving the explosion power and thermal damage effect of RDX-based composite explosives than Ti powders,for the participation of free H_(2)released by TiH_(2)powders in the detonation process.TiH_(2)powders have important research values as a novel energetic additive in the field of military composite explosives.
文摘为了探究含能材料在紫外激光辐照下的烧蚀特点及规律,采用光学显微镜、扫描电子显微镜以及微粒计数器等表征手段,分别对不同质量、不同厚度的黑索今(research department explosive,RDX)含能材料在紫外激光(波长为355 nm)辐照下的烧蚀尺寸、烧蚀形貌以及冲击波引起的材料喷溅等特性进行表征与统计。研究结果表明,随着入射激光能量密度的不断增大,含能材料的横向烧蚀面积和纵向烧蚀深度均先增大后减小,且最终烧蚀面积保持在光斑面积大小,烧蚀深度保持在60μm左右;对于激光烧蚀诱导的含能材料微粒喷溅,中尺寸的微粒数量呈现先增多后减少的趋势,而大尺寸的微粒数量却一直减少。与大光斑激光辐照相比较,在相同能量密度下,小光斑辐照时的横向烧蚀面积更小,烧蚀致微粒喷溅的作用更强。
文摘In order to obtain high-quality spherical RDX crystal particles,the RDX crystals were suspended in a mixed solvent of cyclohexanone and cyclohexane,subsequently a solvent etching study was carried out under the action of vibration/acoustic flow coupled flow field,which generated by resonance acoustic mixing.The effects of solvent ratio,temperature,acceleration and experiment time on morphology as well as particle size of RDX crystals were studied.Not only were the morphology,particle size distribution and crystal form of RDX crystals determined,but also the thermal decomposition performance and mechanical sensitivity of spherical RDX were examined and discussed.Results indicated that under the process of solvent/non-solvent volume ratio at 1:2,temperature of 40℃,acceleration of 40 g and experiment time of 4 h,α-type RDX crystal with sphericity of 0.92 can be obtained.Furthermore,the median particle size(D_(50))of spherical RDX crystals is 215.8 μm with a unimodal particle size distribution(size span 1.34).For one thing,the thermal decomposition peak temperature of spherical RDX is about 2.5℃ higher than that of raw RDX,and apparent activation energy reaches 444.68 kJ/mol.For another thing,impact sensitivity and friction sensitivity of spherical RDX are 18.18% and 33.33% lower than that of raw RDX,respectively.It demonstrates that safety of spherical RDX under thermal,impact and friction stimuli has been improved.
基金supported by National Nature Science Foundation of China(No.22075230)the financial support of the doctoral research foundation(No.19ZX7102)from Southwest University of Science and Technology。
文摘The properties of the combustion and deflagration to detonation transition(DDT)of Al/Fe_(2)O_(3)/RDX hybrid nanocomposites,a type of potentially novel lead-free primary explosives,were tested in weakly confined conditions,and the interaction of Al/Fe_(2)O_(3)nanothermite and RDX in the DDT process was studied in detail.Results show that the amount of the Al/Fe_(2)O_(3)nanothermite has a great effect on the DDT properties of Al/Fe_(2)O_(3)/RDX nanocomposites.The addition of Al/Fe_(2)O_(3)nanothermite to RDX apparently improves the firing properties of RDX.A small amount of Al/Fe_(2)O_(3)nanothermite greatly increases the initial combustion velocity of Al/Fe_(2)O_(3)/RDX nanocomposites,accelerating their DDT process.When the contents of Al/Fe_(2)O_(3)nanothermite are less than 20 wt%,the DDT mechanisms of Al/Fe_(2)O_(3)/RDX nanocomposites follow the distinct abrupt mode,and are consistent with that of RDX,though their DDT processes are different.The RDX added into the Al/Fe_(2)O_(3)nanothermite increases the latter's peak combustion velocity and makes it generate the DDT when the RDX content is at least 10 wt%.RDX plays a key role in the shock compressive combustion,the formation and the properties of the DDT in the flame propagation of nanocomposites.Compared with RDX,the fast DDT of Al/Fe_(2)O_(3)/RDX nanocomposites could be obtained by adjusting the chemical constituents of nanocomposites.
