Broadband high-efficiency dielectric metalenses based on quasi-continuous nanostrips

Benefiting from the abrupt phase changes within subwavelength thicknesses,metasurfaces have been widely applied for lightweight and compact optical systems.Simultaneous broadband and high-efficiency characteristics are highly attractive for the practical implementation of metasurfaces.However,current metasurface devices mostly adopt discrete micro/nano structures,which rarely realize both merits simultaneously.In this paper,dielectric metasurfaces composed of quasi-continuous nanostrips are proposed to overcome this limitation.Via quasi-continuous nanostrips metasurface,a normal focusing metalens and a superoscillatory lens overcoming the diffraction limit are designed and experimentally demonstrated.The quasi-continuous metadevices can operate in a broadband wavelength ranging from 450 nm to 1000nm and keep a high power efficiency.The average efficiency of the fabricated metalens reaches 54.24%,showing a significant improvement compared to the previously reported metalenses with the same thickness.The proposed methodology can be easily extended to design other metadevices with the advantages of broadband and high-efficiency in practical optical systems.

High-efficiency Carbonation Modification Methods of Recycled Coarse Aggregates

To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put forward.The carbonation effect of modified recycled coarse aggregate with three different carbonation methods was evaluated,and water absorption,apparent density and crush index of modified recycled coarse aggregate were measured.Combined with XRD,SEM,and MIP microscopic analysis,the high-efficiency carbonation strengthening mechanism of modified recycled coarse aggregate was revealed.The experimental results show that,compared with the non-carbonated recycled coarse aggregate,the physical and microscopic properties of carbonated recycled coarse aggregate are improved.The method of carbonation with nano-SiO_(2) pre-soaking can realize the high-efficiency carbonation of recycled coarse aggregate,for modified recycled coarse aggregate with the method,water absorption is reduced by 23.03%,porosity is reduced by 44.06%,and the average pore diameter is 21.82 nm.The high-efficiency carbonation strengthening mechanism show that the pre-socked nano-SiO_(2) is bound to the hydration product Ca(OH)_(2) of the old mortar with nano-scale C-S-H,which can improve the CO_(2) absorption rate,accelerate the carbonation reaction,generate more stable CaCO_(3) and nano-scale silica gel,and bond to the dense three-dimensional network structure to realize the bidirectional enhancement of nano-materials and pressurized carbonation.It is concluded that the method of carbonation with nano-SiO_(2) pre-soaking is a novel high-efficiency carbonation modification of recycled coarse aggregate.

Toward high-efficiency perovskite solar cells with one-dimensional oriented nanostructured electron transport materials

The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.

Selection of Greenhouse Zucchini Varieties and High-Quality,High-Yield and High-Efficiency Cultivation Techniques

[Objectives]To select zucchini varieties suitable for cultivation in Zibo City and test its high-yield cultivation techniques.[Methods]Six zucchini varieties were introduced,and their commercial quality and yield were determined.[Results]The yield of Shengfeier,Xiuyu 170 and Xihulu 309 increased by 11.4%,6.9%and 4.6%,respectively compared with S68(control),and zucchini was straight,looked pleasing to the eye,and had strong disease resistance.[Conclusions]The zucchini varieties were selected and the high-quality,high-yield and high-efficiency cultivation techniques were integrated.

High-efficiency Planting Techniques of Five Crops a Year for Fresh Edible "Faba Bean/Spring Mazie+Soybean-Autumn Maize/Autumn Soybean"

The high-efficiency planting mode for five crops a year of fresh edible ＂faba bean/spring maize＋soybean-autumn maize/autumn soybean＂ was introduced, and its yield and economic benefits were compared with the planting mode of three crops a year of ＂faba bean-spring maize/red bean＂. The results showed that the planting method for fresh edible ＂faba bean/spring maize＋soybean-autumn maize/autumn soybean＂ was much easier to operate with the input-output ratio of about185.6%, and its yield and economic benefits were 2.09 and 1.83 times of that of the planting mode for three crops a year, significantly improving the agricultural yield and income of farmers. In addition, the cropping index of the planting mode for fresh edible fresh edible ＂faba bean/spring maize ＋soybean-autumn maize/autumn soybean＂ reached up to 350%, and planting faba bean once a year and soybean twice a year could make the biological fixation amount of nitrogen increase 350-450kg/m^2, which equaled to up to 700 kg/m^2 of urea, showing significant ecological and social benefits. Based on the comparison results, the high-yield culture techniques of the planting mode of fresh edible ＂faba bean/spring maize＋soybean-autumn maize/autumn soybean＂ were summarized.

Adiabatic cooling for cold polar molecules on a chip using a controllable high-efficiency electrostatic surface trap

We propose a controllable high-efficiency electrostatic surface trap for cold polar molecules on a chip by using two insulator-embedded charged rings and a grounded conductor plate. We calculate Stark energy structure pattern of ND3 molecules in an external electric field using the method of matrix diagonalization. We analyze how the voltages that are applied to the ring electrodes affect the depth of the efficient well and the controllability of the distance between the trap center and the surface of the chip. To obtain a better understanding, we simulate the dynamical loading and trapping processes of ND3 molecules in a ｜J, KM = ｜1,-1 state by using classical Monte–Carlo method. Our study shows that the loading efficiency of our trap can reach ～ 88%. Finally, we study the adiabatic cooling of cold molecules in our surface trap by linearly lowering the potential-well depth（i.e., lowering the trapping voltage）, and find that the temperature of the trapped ND3 molecules can be adiabatically cooled from 34.5 m K to ～ 5.8 m K when the trapping voltage is reduced from-35 k V to-3 k V.

High-Efficiency Mid-Infrared Picosecond MgO:PPLN Single Resonant Optical Parametric Oscillator

We demonstrate a high-emciency mid-infrared picosecond optical parametric oscillator （OPO） based on MgO doped periodically poled lithium niobate （MgO：PPLN） with a laser diode array （LDA） pumped Innoslab amplifier as the pumping source. Under a 16 W synchronously pumping power, 4.5 W of idler light at 2896nm is obtained. A tuning range of idler light from 2688nm to 3016nm is achieved, within which the highest optical-optical conversion ettlciency from pump power to OPO output is 35.1%. Moreover, a signal light of -500mW from 1644 to 1700nm with a repetition rate of 233.8 MHz is generated.

Developing high-efficiency base editors by combining optimized synergistic core components with new types of nuclear localization signal peptide

The clustered regularly interspaced short palindromic repeats(CRISPR)–CRISPR-associated protein(Cas) system has been widely used for genome editing. In this system, the cytosine base editor(CBE) and adenine base editor(ABE) allow generating precise and irreversible base mutations in a programmable manner and have been used in many different types of cells and organisms. However, their applications are limited by low editing efficiency at certain genomic target sites or at specific target cytosine(C) or adenine(A) residues. Using a strategy of combining optimized synergistic core components, we developed a new multiplex super-assembled ABE(sABE) in rice that showed higher base-editing efficiency than previously developed ABEs. We also designed a new type of nuclear localization signal(NLS) comprising a FLAG epitope tag with four copies of a codon-optimized NLS(F4NLS^(r2)) to generate another ABE named F4NLS-sABE. This new NLS increased editing efficiency or edited additional A at several target sites. A new multiplex super-assembled CBE(sCBE) and F4NLS^(r2) involved F4NLS-sCBE were also created using the same strategy. F4NLS-sCBE was proven to be much more efficient than sCBE in rice. These optimized base editors will serve as powerful genome-editing tools for basic research or molecular breeding in rice and will provide a reference for the development of superior editing tools for other plants or animals.

Effect of Structural Parameters on the Performance of NS High-efficiency Composite TraysⅠ.The Effect of Aperture and Opening Ratio on NS High-efficiency Composite Trays

In this paper,the structure and characteristics of the NS high-efficiency composite trays based on the doublelayer aperture jet sieve plate and compositely structured packing were investigated.The effect of aperture and opening ratio of plate on the fluid dynamics of the NS high-efficiency composite trays,such as the dry tray pressure drop,the wet tray pressure drop,the entrainment,the froth height,the leakage and mass transfer characteristics,were investigated.As a result, the low pressure drop,the high efficiency and the high capacity are the main advantages of the NS high-efficiency composite trays compared to other types of trays.According to this study,small aperture is useful for reducing the pressure drop and entrainment with a high mass transfer efficiency;while large aperture can achieve high capacity and efficiency in a broader operating range at the same pressure drop and entrainment.

INVESTIGATION OF SURFACE TEMPERATURE IN HIGH-EFFICIENCY DEEP GRINDING

A new thermal model with triangular heat flux distribution is given in high-efficiency deep grinding. The mathematical expressions are driven to calculate the surface temperature. The transient behavior of the maximum temperature on contact area is investigated in different grinding conditions with a J-type thermocouple. The maximum contact temperatures measured in different conditions are found to be between 1 000 ℃ and 1 500 ℃ in burn-out conditions. The experiment results show good agreement with the new thermal model.

A High-Efficiency Broadband Superconducting Nanowire Single-Photon Detector with a Composite Optical Structure

Superconducting nanowire single-photon detectors （SNSPDs） with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance both the system detection efficiency and the response bandwidth. Numerical simulation by the finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures at multiple frequency bands. The absorption capacity of the superconducting nanowires reaches 70%, 72%, 60.73%, 61.7%, 41.2%, and 46.5% at wavelengths of 684, 850, 732, 924, 1256, and 1426nm, respectively. The use of a composite optical structure reduces the total filling factor of superconducting nanowires to only 0.25, decreases the kinetic inductance of SNSPDs, and improves the count rates.

Role of PV-Powered Vehicles in Low-Carbon Society and Some Approaches of High-Efficiency Solar Cell Modules for Cars

Development of highly-efficient photovoltaic (PV) modules and expanding its application fields are significant for the further development of PV technologies and realization of innovative green energy infrastructure based on PV. Especially, development of solar-powered vehicles as a new application is highly desired and very important for this end. This paper presents the impact of PV cell/module conversion efficiency on reduction in CO2 emission and increase in driving range of the electric based vehicles. Our studies show that the utilization of a highly-efficient (higher than 30%) PV module enables the solar-powered vehicle to drive 30 km/day without charging in the case of light weight cars with electric mileage of 17 km/kWh under solar irradiation of 3.7 kWh/m2/day, which means that the majority of the family cars in Japan can run only by the sunlight without supplying fossil fuels. Thus, it is essential to develop high-efficiency as well as low-cost solar cells and modules for automotive applications. The analytical results developed by the authors for conversion efficiency potential of various solar cells for choosing candidates of the PV modules for automotive applications are shown. Then we overview the conversion efficiency potential and recent progress of various Si tandem solar cells, such as III-V/Si, II-VI/Si, chalcopyrite/Si, and perovskite/Si tandem solar cells. The III-V/Si tandem solar cells are expected to have a high potential for various applications because of its high conversion efficiency of larger than 36% for dual-junction and 42% for triple-junction solar cells under 1-sun AM1.5 G illumination, lightweight and low-cost potentials. The analysis shows that III-V based multi-junction and Si based tandem solar cells are considered to be promising candidates for the automotive application. Finally, we report recent results for our 28.2% efficiency and Sharp’s 33% mechanically stacked InGaP/GaAs/Si triple-junction solar cell. In addition, new approaches which are suitable for automotive applications by using III-V triple-junction, and static low concentrator PV modules are also presented.

Approaches for High-Efficiency III-V/Si Tandem Solar Cells

The Si tandem solar cells are very attractive for realizing high efficiency and low cost. This paper overviews current status of III-V/Si tandem solar cells including our results. The analytical results for efficiency potential of Si tandem solar cells and loss analysis of Si bottom cells as well as bandgap energy optimization of sub-cells are presented. The 2-junction and 3-junction Si tandem solar cells have potential efficiencies of 36% and 42%, respectively. ERE (external radiative efficiency) analysis for Si solar cells is analyzed in order to clarify properties of Si bottom solar cells. Properties of single-crystalline Si heterojunction solar cell fabricated in this study were analyzed. The current status of efficiencies of our Si bottom cell, upper III-V 2-junction solar cell and III-V/Si 3-junction tandem solar cell was shown to be 5.2% and 28.6% and 33.8%. Achievement of Jsc of 12 mA/cm2 for Si bottom cell is necessary to realize high-efficiency 3-junction Si tandem solar cells with an efficiency of more than 37%. In addition, this paper presents ERE analysis of III-V 2-junction upper solar cells for improving III-V/Si 3-junction tandem solar cells. Several ways to improve efficiency of III-V/Si 3-junction tandem solar cells by reducing non-radiative recombination, optical and resistance losses are shown.

Loss Analysis of High-Efficiency Perovskite/Si Tandem Solar Cells for Large Market Applications

The Si tandem solar cells composes of III-V, II-VI, chalcogenide and perovskite top cells and Si bottom cells are very attractive for creation of new markets. The perovskite/Si tandem solar cells are thought to be one of the most promising PV devices because of high-efficiency and low-cost potential. However, efficiencies of perovskite/Si tandem solar cells with an efficiency of 29.8% are lower compared to 39.5% with III-V 3-junction tandem solar cells and 35.9% with III-V/Si 3-junction tandem solar cells. Therefore, it is necessary to clarify and reduce several losses of perovskite/Si tandem solar cells. This paper presents high efficiency potential of perovskite/Si tandem solar cells analyzed by using our analytical procedure and discusses about non-radiative recombination, optical and resistance losses in those tandem solar cells. The perovskite/Si 2-junction tandem solar cells is shown to have efficiency potential of 37.4% as a result of non-radiative recombination loss of 2.3%, optical loss of 2.7% and resistance loss of 3.1%. Although the perovskite/Si 3-junction tandem solar cells are thought to be very attractive because of higher efficiency with an efficiency of more than 42%, decreasing non-radiative recombination loss in wide bandgap perovskite solar cell materials is pointed out to be necessary.

High-Efficiency Wide-Band Cross-Polarization Conversion Using Bi-layered Metal Hole Pairs

We present a polarization converter composed of bi-layered metal films perforated with rectangle hole pairs in each film. The proposed converter can convert the polarization of an incident linearly-polarized electromagnetic wave to its orthogonal direction with high efficiency and large bandwidth in the infrared or microwave regions.To make sure of the mechanism of polarization conversion, the current and electric-field distributions at different resonant frequencies are analyzed. It is found that the cross-polarized transmission is due to the near-field coupling between hole pairs in neighboring metal films. Finally, a prototype of the proposed converter is fabricated and measured in the microwave region. Good agreement between the experimental and simulated results is obtained.

High-Efficiency Quantum Routing in a Multi-Cross-Shaped Waveguide

Efficiently routing the quantum signals between different channels is essential in a quantum multichannel network.We investigate the quantum routing in a multi-cross-shaped waveguide coupled to driven three-level systems.Numerical results show that the high routing capacity transferring from the input channel to the other channels can be explicitly enhanced by effective reflection potentials. The proposed system may be utilized as a scalable quantum device to control single-photon routing.

High-Efficiency Green Phosphorescent Organic Light-Emitting Diode Based on Simplified Device Structures

A high-efficiency green phosphorescent organic light emitting diode with a simplified structure is achieved that is free of a hole transport layer. The design of this kind of device structure not only saves the consumption of organic materials but also greatly reduces the structural heterogeneities and effectively facilitates the charge injection into the emissive layer. The resulting green phosphorescent organic light-emitting diodes （PHOLEDs） exhibit higher electroluminescent efficiency. The maximum external quantum efficiency and current efficiency reach 23.7% and 88 cd/A, respectively. Moreover the device demonstrates satisfactory stability, keeping 23.7% and 88cd/A, 22% and 82cd/A, respectively, at a luminance of 100 and 1000cd/m2. The working mechanism for achieving high efficiency based on such a simple device structure is discussed correspondingly. The improved charge carrier injection and transport balance are proved to prominently contribute to achieve the high efficiency and great stability at high luminance in the green PHOLEDs.

High-Efficiency Bottom-Emitting Organic Light-Emitting Diodes with Double Aluminum as Electrodes

Bottom-emitting organic light-emitting diodes （BOLEDs）, using AI/MoO3 as the semitransparent anode and LiF/Al as the reflective cathode and Alqa as the emitter, are fabricated. At the same time, the performance improvement of the BOLEDs having a capping layer inserted between the semitransparent anode and the glass substrate is studied. The optimized microcavity BOLED shows a current efficiency （5.49cd/A） enhancement of 10% compared with a conventional BOLED based on ITO （5.0cd/A）. Slight color variation is observed in 120° forward viewing angle with 5Onto BCP as the capping layer. Strong dependence of efficiency on A1 anode thickness and the thickness and refractor index of the capping layer is explained. The results indicate that the BOLEDs with the double-aluminum electrode have potential practical applications.

HIGH-EFFICIENCY CODING FOR PAL COLOR TELEVISION SIGNAL

Proceeding from the specific characteristics of PAL television signals adopted in China this paper points out that if the fs = 2fsc of sub-Nyquist sampling and DPCM encoding is used for PAL complete signal and if the blanking time is utilized to transmit code of effective area, it is possible to transmit a color TV signal over PCM three-group channel.

Secondary cooling technology for high-efficiency continuous billet-casting

The mathematical model of high-efficiency continuous billet casting was developed, incorporating the effective spraying water coefficient and the effective specific spraying water flowrate of secondary cooling. To realize uniform cooling in secondary cooling zones, the spraying cooling structure and the arrangement of nozzles were redesigned and optimized, and an additional spraying cooling zone was used. A new secondary cooling model of spraying water was built. It was found that the required spraying water flowrate of a cooling zone was related with the casting speed, the casting temperature, the compositions of liquid steel and the cooling water temperature of secondary cooling. The operation of the reformed caster proved that the spraying cooling structure and the new secondary cooling model were suitable, and the casting speed was greatly enhanced. The highest casting speed was （3.8 to 4.0） m/min for billet with a section of 150× 150 mm^2. The quality And the outout of the billet were imoroved, andthe economical benefit was heightened.