Low-Microwave Loss Coplanar Waveguides Fabricated on High-Resistivity Silicon Substrate

Three kinds of coplanar waveguides （CPWs） are designed and fabricated on different silicon substrates---common low-resistivity silicon substrate （LRS）, LRS with a 3μm-thick silicon oxide interlayer, and high-resistivity silicon （HRS） substrate. The results show that the microwave loss of a CPW on LRS is too high to be used, but it can be greatly reduced by adding a thick interlayer of silicon oxide between the CPW transmission lines and the LRS.A CPW directly on HRS shows a loss lower than 2dB/cm in the range of 0-26GHz and the process is simple,so HRS is a more suitable CPW substrate.

The Discovery of Deep High-Resistivity Block and Inadequately Consolidated Magma Chambers in Gaoligongshan Oblique Collisional Orogen and its Tectonic Implications

Objective The Gaoligongshan oblique collisional orogen is located in the southern section of the Hengduan Mountains, and belongs to one of the main Late Yanshanian-Himalayan oblique collisional orogens in the Sanjiang area. Many researchers have studied the geology, geochemistry and geophysics of this region, and many research achievements have been obtained from deep geophysical exploration of the region, especially using the magnetotelluric （MT） sounding technique. However,

High-resistance controlled yielding supporting technique in deep-well oil shale roadways

In order to avoid the deep-well oil shale roadway being deformed, damaged, or difficult to maintain after excavating and supporting in Haishiwan coal mine, this paper has analyzed the characteristics of the deformed roadway and revealed its failure mechanism by taking comprehensively the methods of field geological investigation, displacement monitoring of surrounding rock, rock properties and hydration properties experiments and field application tests. Based on this work, the high-resistance controlled yielding supporting principle is proposed, which is： to ＂resist＂ by high pre-tightening force and high stiff- ness in the early stage, to ＂yield＂ by making use of the controlled deformation of a yielding tube in the middle stage, and to ＂fix＂ by applying total-section Gunite in the later stage. A high-resistance controlled yielding supporting technique of ＂high pre-tightening force yielding anchor bolt ＋ small-bore pre-tight- ening force anchor cable ＋ rebar ladder beam ＋ rhombic metal mesh ＋ lagging gunite＂ has been estab- lished, and industrial on site testing implemented. The practical results show that the high-resistance controlled yielding supporting technique can effectively control the large deformation and long-time rheology of deep-well oil shale roadways and can provide beneficial references for the maintenance of other con-generic roadways.Deep-well Oil shale

Design of MEMS C-Band Microstrip Antenna Array Based on High-Resistance Silicon for Intelligent Ammunition

In recent years, microstrip antennas have been more widely applied in satellite communications, mobile phones, unmanned aerial vehicle （UAV）, and weapons. A micro-electro-mechanical systems-based （MEMS-based） high-resistance silicon C-band microstrip antenna array has been designed for the intelligent ammunition. The center frequency is 4.5 GHz. A cavity has been designed in substrate to reduce the dielectric constant of silicon and high-resistance silicon has been used as the material of substrate to improve the gain of antenna. It is very easy to be manufactured by using MEMS technology because of the improved structure of the antenna. The results show that the gain of the antenna is 8 dB and voltage standing wave ratio （VSWR） is less than 2 by the analysis and simulation in high freauencv structure simulator （HFSS）.

Comparing High-resistance Grounding Method with Resonance Grounding Method for Large Generators

For large generators, the problem of high-resistance grounding method and the advantages of resonance, grounding method are discussed in detail, and an overall comparison is given in this paper. It is recommended that the latter should be adopted so as to increase the operation reliability of large generators and power systems.

Development and molecular analysis of a novel acetohydroxyacid synthase rapeseed mutant with high resistance to sulfonylurea herbicides

With the increasing promotion of simplified rapeseed cultivation in recent years,the development of cultivars with high resistance to herbicides is urgently needed.We previously developed M342,which shows sulfonylurea herbicide resistance,by targeting acetohydroxyacid synthase(AHAS),a key enzyme in branched-chain amino acid synthesis.In the present study,we used a progeny line derived from M342 for an additional round of ethyl methane sulfonate mutagenesis,yielding the novel mutant DS3,which harbored two mutations in AHAS genes and showed high sulfonylurea resistance.One mutation was the substitution Trp574 Leu,as in M342,according to Arabidopsis protein sequencing.The other site was a newly recognized substitution,Pro197 Leu.A KASP marker targeting Pro197 Leu was developed and reliably predicted the response to sulfonylurea herbicides in the F2 population.The combination of Trp574 Leu and Pro197 Leu in DS3 produced a synergistic effect that greatly increased herbicide resistance.Analysis of the protein structures of AHAS1 and AHAS3 in wild-type and single-gene mutant plants revealed three-dimensional protein conformational changes that could account for differences in herbicide resistance characteristics including toxicity tolerance,AHAS enzyme activity,and AHAS gene expression.

Design and fabrication of miniature antenna based on silicon substrate for wireless communications

In this paper, a novel compact CPW-fed slot small antenna was designed and fabricated on high-resistivity silicon （HR-Si） by micro-electronics process. The results of simulation are consistent with results of measurement for the antenna. The mode of the antenna is vertical and horizontal bidirectional radiations. The gain of antenna is 2.5 dB, and the resonance frequency approximately is 3 GHz. This fabrication can be compatible with antenna integration and CMOS process. The parameters of this antenna are for reference radar antenna system of Unmanned Aerial Vehicles （UAV）, satellite transmission, and communication.