Free-walking:Pedestrian inertial navigation based on dual foot-mounted IMU

The inertial navigation system(INS),which is frequently used in emergency rescue operations and other situations,has the benefits of not relying on infrastructure,high positioning frequency,and strong real-time performance.However,the intricate and unpredictable pedestrian motion patterns lead the INS localization error to significantly diverge with time.This paper aims to enhance the accuracy of zero-velocity interval(ZVI)detection and reduce the heading and altitude drift of foot-mounted INS via deep learning and equation constraint of dual feet.Aiming at the observational noise problem of low-cost inertial sensors,we utilize a denoising autoencoder to automatically eliminate the inherent noise.Aiming at the problem that inaccurate detection of the ZVI detection results in obvious displacement error,we propose a sample-level ZVI detection algorithm based on the U-Net neural network,which effectively solves the problem of mislabeling caused by sliding windows.Aiming at the problem that Zero-Velocity Update(ZUPT)cannot suppress heading and altitude error,we propose a bipedal INS method based on the equation constraint and ellipsoid constraint,which uses foot-to-foot distance as a new observation to correct heading and altitude error.We conduct extensive and well-designed experiments to evaluate the performance of the proposed method.The experimental results indicate that the position error of our proposed method did not exceed 0.83% of the total traveled distance.

ROTATING FIBER OPTIC GYRO STRAP-DOWN INERTIAL NAVIGATION SYSTEM WITH THREE ROTATING AXES

The principle of the inertial navigation system（INS） with rotating inertial measurement unit （IMU） is analyzed. A new IMU is established to rotate round each axis in three directions. Then, the related error models for the designed system during rotating are deduced and the improved system is built. Finally, the performance simulation of the proposed system is provided. The simulation result indicates that the designed system can improve the accuracy of the roll and the pitch as well as heading by rotating three axes, thus guaranting the heading accuracy. Moreover, based on the principle of rotation at six different positions, such structure can carry out real-time calibration, and improve the system performance.

Study on rate azimuth platform inertial navigation system

The cost of the gravity passive inertial navigation system will be lower witha rate azimuth platform and gravity sensor constituting a gravity measurement and navigationsystem. According to the system performance characteristics, we study the rate azimuth platforminertial navigation system (RAPINS), give the system navigation algorithm, error equations of theattitude, velocity and position of the rate azimuth platform, and random error models of theaccelerometer and gyro. Using the MATLAB/Simulink tools, we study the RAPINS and RAPINS withvelocity damping. Simulation results demonstrate that the RAPINS with velocity damping has smallerrors in platform attitude and position and satisfies gravity measurement and navigationrequirement.

Suppression of the G-sensitive drift of laser gyro in dual-axis rotational inertial navigation system

The dual-axis rotational inertial navigation system(INS)with dithered ring laser gyro(DRLG)is widely used in high precision navigation.The major inertial sensor errors such as drift errors of gyro and accelerometer can be averaged out,but the G-sensitive drifts of laser gyro cannot be averaged out by indexing.A 16-position rotational simulation experiment proves the G-sensitive drift will affect the long-term navigation error for the rotational INS quantitatively.The vibration coupling and asymmetric structure of the DRLG are the main errors.A new dithered mechanism and optimized DRLG is designed.The validity and efficiency of the optimized design are conformed by 1 g sinusoidal vibration experiments.An optimized inertial measurement unit(IMU)is formulated and measured experimentally.Laboratory and vehicle experimental results show that the divergence speed of longitude errors can be effectively slowed down in the optimized IMU.In long term independent navigation,the position accuracy of dual-axis rotational INS is improved close to 50%,and the G-sensitive drifts of laser gyro in the optimized IMU are less than 0.0002°/h.These results have important theoretical significance and practical value for improving the structural dynamic characteristics of DRLG INS,especially the highprecision inertial system.

A fast and accurate initial alignment method for strapdown inertial navigation system on stationary base

In this work,a fast and accurate stationary alignment method for strapdown inertial navigation system （SINS） is proposed. It has been demonstrated that the stationary alignment of SINS can be improved by employing the multiposition technique,but the alignment time of the azimuth error is relatively longer. Over here, the two-position alignment principle is presented. On the basis of this SINS error model, a fast estimation algorithm of the azimuth error for the initial alignment of SINS on stationary base is derived fully from the horizontal velocity outputs and the output rates, and the novel azimuth error estimation algorithm is used for the two-position alignment. Consequently, the speed and accuracy of the SINS＇ s initial alignment is enhanced greatly. The computer simulation results illustrate the efficiency of this alignment method.

An improved computation scheme of strapdown inertial navigation system using rotation technique

To improve the accuracy of strapdown inertial navigation system(SINS) for long term applications,the rotation technique is employed to modulate the errors of the inertial sensors into periodically varied signals,and,as a result,to suppress the divergence of SINS errors.However,the errors of rotation platform will be introduced into SINS and might affect the final navigation accuracy.Considering the disadvantages of the conventional navigation computation scheme,an improved computation scheme of the SINS using rotation technique is proposed which can reduce the effects of the rotation platform errors.And,the error characteristics of the SINS with this navigation computation scheme are analyzed.Theoretical analysis,simulations and real test results show that the proposed navigation computation scheme outperforms the conventional navigation computation scheme,meanwhile reduces the requirement to the measurement accuracy of rotation angles.

Error model identification of inertial navigation platform based on errors-in-variables model

Because the real input acceleration cannot be obtained during the error model identification of inertial navigation platform, both the input and output data contain noises. In this case, the conventional regression model and the least squares （LS） method will result in bias. Based on the models of inertial navigation platform error and observation error, the errors-in-variables （EV） model and the total least squares （TLS） method axe proposed to identify the error model of the inertial navigation platform. The estimation precision is improved and the result is better than the conventional regression model based LS method. The simulation results illustrate the effectiveness of the proposed method.

Analysis of Error for a Rotating Strap-down Inertial Navigation System with Fibro Gyro

The error equation of a rotating inertial navigation system was introduced. The effect of the system's main error source (constant drift of gyro and zero bias of accelerometer) under rotating conditions for the system was analyzed. Validity of theoretical analysis was shown via simulation, and that provides a theoretical foundation for a rotating strap-down inertial navigation system during actual experimentation and application.

Error Model of Rotary Ring Laser Gyro Inertial Navigation System

To improve the precision of inertial navigation system（INS） during long time operation,the rotation modulated technique（RMT） was employed to modulate the errorr of the inertial sensors into periodically varied signals,and,as a result,to suppress the divergence of INS errors.The principle of the RMT was introduced and the error propagating functions were derived from the rotary navigation equation.Effects of the measurement error for the rotation angle of the platform on the system precision were analyzed.The simulation and experimental results show that the precision of INS was ① dramatically improved with the use of the RMT,and ② hardly reduced when the measurement error for the rotation angle was in arc-second level.The study results offer a theoretical basis for engineering design of rotary INS.

Application of H_∞ filtering in the initial alignment of strapdown inertial navigation system

In this paper , the principle of H∞ filtering is discussed and H_∞ filter is constructed, which is used in the initial alignment of the strapdown inertial navigation systems(SINS). The error model of SINS is derived. By utilizing constructed H∞ filter, the filtering calculation to that system has been conducted. The simulation results of the misalignment angle are given under the condition of unknown noises. The results show that the process of alignment with H∞ filter is much faster and with excellent robustness.

A Combined Alignment Method for Strapdown Inertial Navigation System on Stationary Base

Owing to the weak observability of the azimuth misalignment angle,alignment accuracy and time are always the contradictory issues in the initial alignment process of Strapdown Inertial Navigation System(SINS),which requires a compromise between them.In this paper,a combined alignment mechanism is proposed to construct an observable and controllable system model,which can effectively achieve higher azimuth alignment accuracy during the fixed time period.First,the Reduced Order Kalman Filter(ROKF)alignment algorithm was utilized to calculate the misalignment angles in parallel with the classical gyrocompass alignment algorithm.Then,the misalignment angles calculated by the gyrocompass alignment method were used to formulate the augmented measurement model with zero velocity models.Finally,the zero velocity model of the ROKF method was switched into the augmented measurement model when the azimuth misalignment angle of the gyrocompass alignment method was close to steady situation.The combined alignment method was analyzed reasonably by the observability and the mathematical deduction.The comparison results of the numerical simulation and the experimental data test showed that the combined method had good performance in terms of estimation accuracy and consistency of the alignment results.

Fast Compass Alignment for Strapdown Inertial Navigation System

Initial alignment is the precondition for strapdown inertial navigation system(SINS)to navigate.Its two important indexes are accuracy and rapidity,the accuracy of the initial alignment is directly related to the working accuracy of SINS,but in self-alignment,the two indexes are often contradictory.In view of the limitations of conventional data processing algorithms,a novel method of compass alignment based on stored data and repeated navigation calculation for SINS is proposed.By means of data storage,the same data is used in different stages of the initial alignment,which is beneficial to shorten the initial alignment time and improve the alignment accuracy.In order to verify the correctness of the compass algorithm based on stored data and repeated navigation calculation,the simulation experiment was done.In summary,when the computer performance is sufficiently high,the compass alignment method based on the stored data and the forward and reverse navigation calculation can effectively improve the alignment speed and improve the alignment accuracy.

The Performance Evaluation of the Integration of Inertial Navigation System and Global Navigation Satellite System with Analytic Constraints

The integration of GNSS （Global Navigation Satellite System） and INS （Inertial Navigation System） using IMU （Inertial Measurement Unit） is now widely used for MMS （Mobile Mapping System） and navigation applications to seamlessly determine position, velocity and attitude of the mobile platform. With low cost, small size, ligh weight and low power consumtion, the MEMS （Micro-Electro-Mechanical System） IMU and low cost GPS （Global Positioning System） receivers are now the trend in research and using for many applications. However, researchs in the literature indicated that the the performance of the low cost INS/GPS systems is still poor, particularly, in case of GNSS-noise environment. To overcome this problem, this research applies analytic contrains including non-holonomic constraint and zero velocity update in the data fusion engine such as Extended Kalman Filter to improve the performance of the system. The benefit of the proposed method will be demonstrated through experiments and data analysis.

Approach of Improving the Inertial Navigation System Error for Large Transport Aircraft

The corresponding corrected method is proposed for the INS ( INS-Inertial Navigation System ) accumulated error of large transport aircraft. System errors contain aircraft position error, altitude error and speed error,one is increasing the accuracy of hardw are; the other is development of low cost softw are algorithms. Because of improving hardw are is more difficult in my country at present, developing softw are algorithms is essential w ay,w hich have been validated in my types of airplane. The combined heuristic algorithms ( ABPNN,Advanced Back-propagation neural netw orks algorithm and LSM -least square method) are presented,w hich incorporates the effects of flight region and measured terrain height data by radar and barometer. Based on this algorithm,the appropriate match region w as gotten by recognition of fiducial digital map in real time online. In process of w ork,the minimum of position error as a cost function and the constraint conditions are gave,the flight positions are recognized in real time and continuously,least sum of square is calculated based on LSM ,in other w ords,the optimized result is obtained. The simulation case demonstrate that the method is very successful,the correct rate of recognition is more 90 percent. In w ords,the algorithm presented is economical,validation and effective.

Method of improving pedestrian navigation performance based on chest card

With the development of positioning technology,loca-tion services are constantly in demand by people.As a primary location service pedestrian navigation has two main approaches based on radio and inertial navigation.The pedestrian naviga-tion based on radio is subject to environmental occlusion lead-ing to the degradation of positioning accuracy.The pedestrian navigation based on micro-electro-mechanical system inertial measurement unit(MIMU)is less susceptible to environmental interference,but its errors dissipate over time.In this paper,a chest card pedestrian navigation improvement method based on complementary correction is proposed in order to suppress the error divergence of inertial navigation methods.To suppress atti-tude errors,optimal feedback coefficients are established by pedestrian motion characteristics.To extend navigation time and improve positioning accuracy,the step length in subsequent movements is compensated by the first step length.The experi-mental results show that the positioning accuracy of the pro-posed method is improved by more than 47%and 44%com-pared with the pure inertia-based method combined with step compensation and the traditional complementary filtering com-bined method with step compensation.The proposed method can effectively suppress the error dispersion and improve the positioning accuracy.

Error Analysis and Compensation of Strapdown Inertial Navigation System

Based on error analysis, the influence of error sources on strapdown inertial navigation systems is discussed. And the maximum permissible component tolerances are established. In order to achieve the desired accuracy (defined by circular error probability), the types of appropriate sensors are chosen. The inertial measurement unit (IMU) is composed of those sensors. It is necessary to calibrate the sensors to obtain their error model coefficients of IMU. After calibration tests, the accuracy is calculated by uniform design method and it is proved that the accuracy of IMU is satisfied for the desired goal.

Ground Alignment of Inertial Navigation System with the Aid of GPS Signals

Due to the poor observability of INS ground self alignment, only horizontal alignment is satisfied. This paper proposes using GPS double difference carrier phase as external reference to improve the observability of INS self alignment. Through observability analysis and computer simulation, it is demonstrated that the azimuth alignment is as quick as horizontal alignment, the accuracy of horizontal alignment is improved, and the gyros errors can be estimated quickly and precisely.

Pseudo-linear inertial navigation algorithm

A new method is illustrated for processing the output of a set of triad orthogonal rate gyros and accelerometers to reconstruct vehicle navigation parameters(attitude, velocity, and position). The paper introduces two vectors with dimensions 4×1 as velocity and position quaternions.The navigation equations for strapdown systems are nonlinear but after using these parameters, the navigation equations are converted into a pseudo-linear system. The new set of navigation equations has an analytical solution and the state transition matrix is used to solve the linear timevarying differential equations through time series. The navigation parameters are updated using the new formulation for strapdown navigation equations. Finally, the quaternions of velocity and position are converted into the original position and velocity vectors. The combination of the coning motion and a translational oscillatory trajectory is used to evaluate the accuracy of the proposed algorithm. The simulations show significant improvement in the accuracy of the inertial navigation system, which is achieved through the mentioned algorithm.

Comparison of strapdown inertial navigation algorithm based on rotation vector and dual quaternion

For the navigation algorithm of the strapdown inertial navigation system, by comparing to the equations of the dual quaternion and quaternion, the superiority of the attitude algorithm based on dual quaternion over the ones based on rotation vector in accuracy is analyzed in the case of the rotation of navigation frame. By comparing the update algorithm of the gravitational velocity in dual quaternion solution with the compensation algorithm of the harmful acceleration in traditional velocity solution, the accuracy advantage of the gravitational velocity based on dual quaternion is addressed. In view of the idea of the attitude and velocity algorithm based on dual quaternion, an improved navigation algorithm is proposed, which is as much as the rotation vector algorithm in computational complexity. According to this method, the attitude quaternion does not require compensating as the navigation frame rotates. In order to verify the correctness of the theoretical analysis, simulations are carried out utilizing the software, and the simulation results show that the accuracy of the improved algorithm is approximately equal to the dual quaternion algorithm.