Optimization of the Algorithm for Increasing Injection Rate in Water Injection Wells for Pressure Optimization in P Oilfield

In today’s society, with the continuous growth of energy demand, Bohai Oilfield, as an important offshore oil resource base in China, is facing increasingly severe challenges while contributing to national energy security. In order to improve the quality of water injection in the oilfield and gradually achieve efficient and stable production, Bohai Oilfield has launched a water injection well pressure optimization project, focusing on improving the efficiency and quality of water injection in the water injection wells, in order to achieve the optimal water injection plan. In practical work, P Oilfield continues to promote the development of water injection well pressure optimization projects, emphasizing practical exploration and continuous optimization of work plans. However, during the project implementation process, there were some problems, one of which was that the statistics of cumulative injection volume were not scientific enough, resulting in a more comprehensive and accurate presentation of the actual results of pressure optimization work. In the context of continuous improvement work, after careful analysis and research, P Oilfield has decided to optimize the cumulative injection rate algorithm to guide the oilfield’s water injection work in a more refined way, ensuring sufficient and good water injection, and enhancing the oilfield’s production efficiency and comprehensive competitiveness.

Characterization of Biofilms and Mineralogical Scale in Underground Injection Well Disposal of Landfill Leachate and Industrial Wastewater Streams

Deep-well injection is a cost-effective alternative for industrial wastewater disposal, given the appropriate geology. Fouling of injection well tubing by biofilm or scale is common and reduces the effective diameter of the pipe, which results in increased wellhead pressure and lower injectivity. A detailed microbiological composition of biofilms and abiotic fingerprints use of mineral scale from an injection well has not been reported before. Therefore, biofilm and mineral scale samples from three depth intervals within a deep injection well (surface zone, D1= 0 - 61 m;intermediate zone, D2 = 62 - 457 m;and above the injection zone, D3 = 458 - 884 m) with recurrent biofilm development were collected to characterize the mineral composition and microbial community DNA. X-ray diffraction (XRD) analysis of the solids confirms the composition of the solids collected was mostly calcium carbonate (CaCO3) with minor contributions from common mineral salts. Microbiological fingerprinting suggests that methanogenic archaea and sulfate-reducing bacteria both of which are anaerobic biofilm producers were the most prevalent members of the prokaryotic community at all sampled depths. Methanosarcinae spp. increased with increasing depths, unlike other archaea. A non-pathogenic biofilm-producing Entamoeba dispar was the most prevalent member of the microbial domain (>30%) in all samples but was highest at the middle depth. The Chao alpha diversity indices for bacteria, viruses, and protozoans were highest at the shallow depth and gradually declined with increasing depth. The prevalent species above the injection zone depth are not barophilic organisms that thrive at high pressures, rather they are sulfate-reducing bacteria involved in anaerobic dissimilatory sulfate metabolism.

Analyses of Physical Data to Evaluate the Potential to Identify Class I Injection Well Fluid Migration Risk

Injection wells have been used for disposal of fluids for nearly 100 years. Design of injection well systems has advanced over the years, but environmental concerns due to the potential for migration of injected fluids remain. Fluids range from hazardous materials, to mining waste to treated wastewater. This paper presents an evaluation of wells injecting treated wastewater to assess which create the greatest risk to migration potential. Prior studies have looked at the risks of Class I injection wells for wastewater disposal, but limited data were available at that time. This research involved collecting data and evaluating the differences as a means to predict the potential for fluid migration in the wells. There were four issues that might portend migration: well depth-shallower wells tended to have more migration;the tightness of the confining unit immediately above the injection zone;well age;and the use of tubing and packers. Florida is moving away from tubing and packer wells which may be an indicative of this issue. The results provide a pathway to investigate injection wells in other states.

Application of fuzzy comprehensive evaluation method to assess effect of conformance control treatments on water-injection wells

As an effective method to prolong the life of mature field,conformance control in water-injection well has been used wildly.Naturally,effect evaluation of conformance control has attracted great attention because it is an important guideline for the design of later enhanced oil recovery(EOR)plan.Usually,production responses such as excessive water reduction and oil production increment are widely used as the indicators.However,production responses may be unreliable due to the difficulty in determining an effective injection well which is caused by a large number of treated water-injection wells in a well group.Therefore,with the application of fuzzy comprehension evaluation(FCE),five evaluation indexes(injection pressure,injectivity index,slope of hall curve,variation coefficient and homogenization coefficient of injection profile)describe injection responses were selected to establish a new evaluation method in this paper.Based on fuzzy mathematics,FCE reflects the difference of evaluation units.Meanwhile,weights of evaluation indexes were obtained by analytic hierarchy process(AHP),which made the results more convincing.Taking Bai 239 oilfield as an example,the five injection responses indexes were used to assess treatment effect on five water-injection wells by single index evaluation and FCE.The results showed that among the five evaluation indexes mentioned above,the slope of hall curve was the most important factor affected evaluation result.In single index evaluation,opposite results may be produced easily on account of the one-sidedness of single index or human error.Furthermore,we found that effective treatment was a relative concept actually.The result of FCE was consistent with single index evaluation but FCE was more acceptable.This study suggests that FCE could be applied to another field such as water flooding,acidizing and hydraulic fracturing.

Horizontal well spacing optimization and gas injection simulation for the ultra-low-permeability Yongjin reservoir

Optimal spacing for vertical wells can be effectively predicted with several published methods,but methods suitable for assessing the proper horizontal well spacing are rare.This work proposes a method for calculating the optimal horizontal well spacing for an ultra-low permeability reservoir e the Yongjin reservoir in the Juggar Basin,northwestern China.The result shows that a spacing of 640m is the most economical for the development of the reservoir.To better develop the reservoir,simulation approaches are used and a new model is built based on the calculated well spacing.Since the reservoir has an ultralow permeability,gas injection is regarded as the preferred enhanced oil recovery(EOR)method.Injection of different gases including carbon dioxide,methane,nitrogen and mixed gas are modelled.The results show that carbon dioxide injection is the most efficient and economical for the development of the reservoir.However,if the reservoir produces enough methane,reinjecting methane is even better than injecting carbon dioxide.

Refractory lipoatrophy treated with autologous whole blood injection:A case report

BACKGROUND Intramuscular corticosteroid injection may cause adverse effects such as dermal and/or subcutaneous atrophy,alopecia,hypopigmentation,and hyperpigmentation.Although cutaneous atrophy can spontaneously resolve,several treatment options have been suggested for this condition.CASE SUMMARY In this paper,we report a case of corticosteroid injection induced lipoatrophy treated with autologous whole blood(AWB)injection,as the condition had been unresponsive to fractional laser therapy.A 29-year-old female patient visited the dermatology clinic complaining of skin depression on her right buttock area,which had appeared six months earlier.There had been only subtle improvement at the margins after fractional CO2 laser treatment;therefore,after obtaining informed consent from the patient,AWB treatment was initiated.One month after the first AWB injection,the size and depth of the lesion had noticeably improved,and a slight improvement was also observed in discoloration.CONCLUSION Close observation is the initial treatment of choice for steroid induced skin atrophy;however,for patients in need of immediate cosmetic improvement,AWB injection may be a safe and cost-effective alternative.

Theory and application of the transient injection well test

Based on the theory of the pumping well test,the transient injection well test was suggested in this paper.The design method and the scope of application are discussed in detail.The mathematical models are developed for the short-time and long-time transient injection test respectively.A double logarithm type curve matching method was introduced for analyzing the field transient injection test data.A set of methods for the transient injection test design,experiment performance and data analysis were established.Some field tests were analyzed,and the results show that the test model and method are suitable for the transient injection test and can be used to deal with the real engineering problems.

Study and application of a new blockage remover in polymer injection wells

With the extensive application of polymer flooding technology in offshore oilfields,the plugging in polymer injection wells has become more and more severe,which seriously affects the oil displacement effect and regular production of oilfields.In this paper,a new kind of blockage remover has been developed and evaluated by rheological behavior experiments,dissolution experiments and core flooding experiments.The results reveal that this new blockage remover can effectively reduce the viscosity of polymer and completely degrade the reservoir blockage with low corrosion rate.It is beneficial to long-term production of oil wells in offshore oilfield.Results of core flooding experiments show that this new blockage remover can relieve polymer damage and improve permeability.The agent has been applied in LD10-1 oilfield in 2016,the daily injection rate increased significantly after stimulation.

Three-dimensional physical simulation and optimization of water injection of a multi-well fractured-vuggy unit

With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.

Influence of hydrogen-enriched atmosphere under coke oven gas injection on reduction swelling behaviors of oxidized pellet

It is of great importance to elucidate reduction swelling behaviors and reaction mechanism of oxidized pellet in hydrogen-enriched atmosphere under coke oven gas injection. In this work, the effects of hydrogen concentration in N_2-CO-H_2 atmosphere with unchanged CO content on reduction swelling behaviors of oxidized pellet at 1173 K were studied, to clarify the mechanism of hydrogen-enriched reduction and exclude the influences of CO. Then, the reduction swelling behaviors of oxidized pellet at 1173 K in actual atmosphere under coke oven gas(COG) injection, got from the simulation results of multi-fluid blast furnace model, were investigated. The results show that with the concentration of hydrogen increasing in N_2-CO-H_2 gas from 2% to 18%, the reduction swelling index of pellet decreases from 10.12% to 5.57% while the reduction ratio of pellet increases obviously from 39.85% to 69.58%. In addition, with COG injection rate increasing from 0 to 152.34 m^3/t, the reduction swelling index of pellet decreases slightly from 10.71% to 9.54% while the reduction ratio of pellet is increased from 31.57% to 36.39%. The microstructures of pellet are transformed from the platy structure to the flocculent structure.

Porothermoelastic response of an oil sand formation subjected to injection and micro-fracturing in horizontal wells

Stimulation of unconsolidated formations via horizontal wells has seen its vast implementation in the recent development of heavy oil reservoir to save the time and cost of preheating the reservoir before the steam-assisted gravity drainage(SAGD)process.A mathematical approach was proposed in this research that fully couples the hydraulic,mechanical and thermal responses of unconsolidated sandstone formations and also applies failure criteria for describing either shear dilation or tensile parting mechanism that generates microcracks.The approach was implemented to predict the porothermoelastic response of a pair of SAGD wells subject to injection and subsequent micro-fracturing using hot water.It was found that the predicted bottom hole pressures(BHPs)match closely with the field observed data.An elliptical dilation zone developed around the dual wells with relatively high pore pressure,porosity,permeability and temperature,implying good interwell hydraulic communication between both wells.The activation of microcracks dramatically accelerated the dissipation of pore pressure across the entire formation depth and also facilitated heat convection in between the dual wells,though to a lesser extent.In summary,the approach provides a convenient means to assist field engineers in the optimization of injection efficiency and evaluation of interference among multiple horizontal wells.

Simulation study of blue InGaN multiple quantum well light-emitting diodes with different hole injection layers

InGaN-based light-emitting diodes with p-GaN and p-A1GaN hole injection layers are numerically studied using the APSYS simulation software. The simulation results indicate that light-emitting diodes with p-A1GaN hole injection layers show superior optical and electrical performance, such as an increase in light output power, a reduction in current leakage and alleviation of efficiency droop. These improvements can be attributed to the p-A1GaN serving as hole injection layers, which can alleviate the band bending induced by the polarization field, thereby improving both the hole injection efficiency and the electron blocking efficiency.

A fast explicit finite difference method for determination of wellhead injection pressure

A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM.Moreover,a flow rate estimate method was developed for the project whose injection rate has not been clearly determined.A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project,which is a good practice verification of FEFDM.At last,this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure.The result shows that for deep wellbore,the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted.It is also shown that with flow rate increasing,the friction term can no longer be neglected.

Efficiency droop suppression in GaN-based light-emitting diodes by chirped multiple quantum well structure at high current injection

Gallium nitride （GaN） based light-emitting diodes （LEDs） with chirped multiple quantum well （MQW） structures have been investigated experimentally and numerically in this paper. Compared to conventional LEDs with uniform quantum wells （QWs）, LEDs with chirped MQW structures have better internal quantum efficiency （IQE） and carrier injection efficiency. The droop ratios of LEDs with chirped MQW structures show a remarkable improvement at 600 mA/mm2, reduced down from 28.6% （conventional uniform LEDs） to 23.7% （chirped MQWs-a） and 18.6% （chirped MQWs-b）, respectively. Meanwhile, the peak IQE increases from 76.9% （uniform LEDs） to 83.7% （chirped MQWs-a） and 88.6% （chirped MQWs-b）. The reservoir effect of chirped MQW structures is the significant reason as it could increase hole injection efficiency and radiative recombination. The leakage current and Auger recombination of chirped MQW structures can also be suppressed. Furthermore, the chirped MQWs-b structure with lower potential barriers can enhance the reservoir effect and obtain further improvement of the carrier injection efficiency and radiative recombination, as well as further suppressing efficiency droop.

TWO-PHASE FLOW FOR A HORIZONTAL WELL PENETRATING A NATURALLY FRACTURED RESERVOIR WITH EDGE WATER INJECTION

This paper examines the two-phase flow for a horizontal well penetrating a naturally fractured reservoir with edge water injection by means of a fixed streamlinemodel,The mathematical model of the verical two-dimensional flow or oil-water for a horizontal well in a medium with double-porosity is established ,and whose accuratesolutions are obtained by using the characteristic method .The saturation distributionsin the fractured system and the matrix system as well as the formula of the time of water free production are presented .All these results provide a theoretical basis and a computing method for oil displacement by edge water from naturally fracturedreservirs.

Numerical simulation of operation performance on production and injection of a double well geothermal system in Kailu Basin, Inner Mongolia

Inner Mongolia is abundant in geothermal resources,but the development and utilization of medium-depth geothermal resources for clean heating in winter is still in the preliminary stage compared with the neighboring provinces.In this paper,a recently developed geothermal heating system using the Mesozoic sandstone reservoirs in Baokang of Kailu Basin,Eastern Inner Mongolia was investigated,a threedimensional geological model of a pair of production and injection well was established,and numerical simulations on the long term operation performance were conducted and verified by pumping test and water level recovery test data.The effects of flow rates,the direction of wells,injection temperature and ratios on the flow field and water level in the thermal reservoir were analyzed.The results show that considering a 30-year operation period and a production rate from 90 m^(3)/h to 110 m^(3)/h,the optimum well spacing can be increased from 225 m to 245 m,with an average value of 235 m.With the decrease of the injection temperature,the cold front of the injection water has an increasing influence on the temperature in the production well.A complete injection or the principle of production according to injection is recommended in order to maintain the long-term operation stability.In addition,the location of the injection well should be arranged in the downstream of the natural flow field.The present results can provide a useful guide for the optimum design and performance prediction of geothermal wells,thus maintaining the production and injection balance and promoting the sustainable development and utilization of medium-depth and deep geothermal resources.

A mimic of soft tissue infection: intra-arterial injection drug use producing hand swelling and digital ischemia

BACKGROUND: Inadvertent intra-arterial injection of illicit substances is a known complication of injection drug use and can lead to severe complications, including infection, ischemia and compartment syndrome. Identifying complications of intra-arterial injection can be difficult, as clinical manifestations overlap with other more common conditions such as cellulitis and soft tissue infection, and a history of injection drug use is frequently not disclosed.METHODS: A 37-year-old male patient presented with 24 hours of right hand pain, erythema and swelling. Despite classic "track marks", he denied a history of injection drug use, and vascular insults were not initially considered. After failing to respond to three days of aggressive treatment for suspected deep-space infection, an arteriogram demonstrated findings consistent with digital ischemia of embolic etiology.RESULTS: As a result of the delay in diagnosis, the lesion was not amenable to reperfusion and the patient required amputation of the distal digit.CONCLUSION: Practitioners should be alert to the possibility of intra-arterial injection and resulting complications when evaluating unusual extremity infections or unexplained ischemic symptoms, even in the absence of a definite history of injection drug use.

Analysis and Calculation of the Flow Pressure in the Multipoint Steam Injection String of a Horizontal Well

The multipoint steam injection string of the horizontal well is a commonly used downhole component for high efficiency steam injection of the thermal recovery horizontal well. A reasonable layout of the valves to ensure an even steam output of each point is still not well designed. At present, a general design method which is urgently necessary isn＇ t applied by each factory. According to the balance relationship of the momentum, the energy and the mass of the fluid flowing in the string, the pressure distribution equation of the fluid flowing in the multipoint steam injection string is built. On the basis of this equation, the design calculation method of the multipoint steam injection string is come up with. A specific example is given in the paper. Study shows that, with the equation built in this paper, the string can be designed with each axial valve having the same output, so that the technical demand of an even steam injection of the horizontal well section can be met.

Cross-upgrading of biomass hydrothermal carbonization and pyrolysis for high quality blast furnace injection fuel production:Physicochemical characteristics and gasification kinetics analysis

The paper proposes a biomass cross-upgrading process that combines hydrothermal carbonization and pyrolysis to produce high-quality blast furnace injection fuel.The results showed that after upgrading,the volatile content of biochar ranged from 16.19%to 45.35%,and the alkali metal content,ash content,and specific surface area were significantly reduced.The optimal route for biochar pro-duction is hydrothermal carbonization-pyrolysis(P-HC),resulting in biochar with a higher calorific value,C=C structure,and increased graphitization degree.The apparent activation energy(E)of the sample ranges from 199.1 to 324.8 kJ/mol,with P-HC having an E of 277.8 kJ/mol,lower than that of raw biomass,primary biochar,and anthracite.This makes P-HC more suitable for blast furnace injection fuel.Additionally,the paper proposes a path for P-HC injection in blast furnaces and calculates potential environmental benefits.P-HC of-fers the highest potential for carbon emission reduction,capable of reducing emissions by 96.04 kg/t when replacing 40wt%coal injec-tion.

A Probabilistic Trust Model and Control Algorithm to Protect 6G Networks against Malicious Data Injection Attacks in Edge Computing Environments

Future 6G communications are envisioned to enable a large catalogue of pioneering applications.These will range from networked Cyber-Physical Systems to edge computing devices,establishing real-time feedback control loops critical for managing Industry 5.0 deployments,digital agriculture systems,and essential infrastructures.The provision of extensive machine-type communications through 6G will render many of these innovative systems autonomous and unsupervised.While full automation will enhance industrial efficiency significantly,it concurrently introduces new cyber risks and vulnerabilities.In particular,unattended systems are highly susceptible to trust issues:malicious nodes and false information can be easily introduced into control loops.Additionally,Denialof-Service attacks can be executed by inundating the network with valueless noise.Current anomaly detection schemes require the entire transformation of the control software to integrate new steps and can only mitigate anomalies that conform to predefined mathematical models.Solutions based on an exhaustive data collection to detect anomalies are precise but extremely slow.Standard models,with their limited understanding of mobile networks,can achieve precision rates no higher than 75%.Therefore,more general and transversal protection mechanisms are needed to detect malicious behaviors transparently.This paper introduces a probabilistic trust model and control algorithm designed to address this gap.The model determines the probability of any node to be trustworthy.Communication channels are pruned for those nodes whose probability is below a given threshold.The trust control algorithmcomprises three primary phases,which feed themodel with three different probabilities,which are weighted and combined.Initially,anomalous nodes are identified using Gaussian mixture models and clustering technologies.Next,traffic patterns are studied using digital Bessel functions and the functional scalar product.Finally,the information coherence and content are analyzed.The noise content and abnormal information sequences are detected using a Volterra filter and a bank of Finite Impulse Response filters.An experimental validation based on simulation tools and environments was carried out.Results show the proposed solution can successfully detect up to 92%of malicious data injection attacks.