Explosion damage effects of aviation kerosene storage tank under strong ignition

In order to study the blast damage effects of aviation kerosene storage tanks,the out-field explosion experiments of 8 m3fixed-roof tanks were carried out.The fragments,shock wave and fireball thermal radiation of the tank in the presence of bottom oil,half oil and full oil,as well as empty tank,were investigated under internal explosion by various TNT charge contents(1.8 kg,3.5 kg and 6.2 kg).The results showed that the tank roof was the only fragment produced,and the damage forms could be divided into three types.The increase of TNT charge content and oil volume enlarged the deformation of the tank,while the hole ratio presented a trend of increase first and then decrease.The H_r,maxand V_(max)values positively increased as increasing the TNT charge content and oil volume(from empty to half oil),but decreased in full oil.The Pmaxvalues had a progressive increase with the increment of TNT charge content,but not the case with the increase in oil volumes.The development of fireball was divided into three stages:tank roof‘towed'flame,jet flow flame tumbling and rising,and jet flow flame extinguishing.The Dmaxand Hf,maxvalues both increased as increasing TNT charge content and oil volumes.The oscillation phenomenon of fireball temperature was observed in the cooling process.The average temperature of fireball surface was positively correlated with TNT charge content,and negatively correlated with oil volumes.

Tribology behavior of double-glow discharge Mo layers on titanium alloy in aviation kerosene environment

In order to improve the tribology behavior in aviation kerosene, molybdenum （Mo） modified layers were fabricated on Ti6Al4V base alloy using a double-glow plasma surface alloying technique. The morphology, microstructure, microhardness and element depth distribution of the Mo modified layers were studied. The tribology properties of Ti6Al4V base alloy, Mo modified layers and 5CrMnMo tool steel sliding with GCr15 steel or QSn4-3 copper alloy counterparts in aviation kerosene were comparatively researched. The effect of roughness on the sliding wear behavior was discussed. The results indicate that the Mo modified layers with polishing treatments not only reduce the friction coefficient of Ti6Al4V base, but also enhance the wear resistance of the counterparts. The Mo modified layers have better tribology behavior than 5CrMnMo steel. It is also found that the wear volume loss of the counterparts is proportional to the value of roughness of Mo modified layers, which is related directly to the ploughing wear between micro convex bodies of the layers and counterparts.

Numerical study on non-uniform heat transfer deterioration of supercritical RP-3 aviation kerosene in a horizontal tube

The convective heat transfer of supercritical-pressure RP-3(Rocket Propellant 3)aviation kerosene in a horizontal circular tube has been numerically studied,focusing mainly on the non-uniform heat transfer deterioration along the circumferential direction.The governing equations of mass,momentum and energy have been solved using the pressure-based segregated solver based on the finite volume method.The re-normalization group(RNG)k-εturbulence model with an enhanced wall treatment was selected.Considering the heat conduction in the solid wall,the mechanism of heat transfer deterioration and the buoyancy effect on deteriorated heat transfer were discussed.The evolution of secondary flow was analyzed.Effects of the outer-wall heat flux,mass flux,pressure and tube thermal conductivity on heat transfer were investigated.Moreover,the buoyancy criterion and the heat transfer correlation were obtained.Results indicate that the poor flow performance of near-wall fluid causes the pseudo-film boiling,further leads to the heat transfer deterioration.The strong buoyancy has an effect of enhancing the heat transfer at the bottom of tube,and weakening the heat transfer at the top of tube,which results in the non-uniform inner-wall temperature and heat flux distributions.Decreasing the ratio of outer-wall heat flux and mass flux,increasing the pressure could weaken the heat transfer difference along the circumferential direction,while the effect of thermal conductivity of tube on the circumferential parameters distributions is more complicated.When the buoyancy criterion of(Grq/Grth)max≤0.8 is satisfied,the effect of buoyancy could be ignored.The new correlations work well for non-uniform heat transfer predictions.

Oxidative Desulfurization of Non-hydrotreated Kerosene Using Hydrogen Peroxide and Acetic Acid

The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of various operating parameters including reaction temperature (T),acid to sulfur molar ratio (nacid/nS),and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated.The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal.Moreover,there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS=8 and 23 for the reaction temperatures of 25 and 60°C,respectively.The maximum observed sulfur removal in the present oxidative desulfurization system was 83.3%.

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave(RDW),a series of experimental tests were carried out on the rotating detonation combustor(RDC)with air-heater.The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygenenriched air,respectively.The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35%unchanged,and the total mass flow rate is maintained at about 1000 g/s,changing the total temperature of the oxygen-enriched air from 620 K to 860 K.Three different types of instability were observed in the experiments:temporal and spatial instability,mode transition and re-initiation.The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time.Moreover,the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially.The phenomenon of single-double-single wave transition is analyzed.During the transition,the initial RDW weakens until disappears,and the compression wave strengthens until it becomes a new RDWand propagates steadily.The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper,the kerosene/air rotating detonation engines(RDE)are numerically investigated,and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation,instabilities,and propulsive performance.A hybrid MPI t OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC)systems.A series of cases with the total pressure of 1 MPa,1.5 MPa,2 MPa,and the equivalence ratio of 0.9,1,1.4 are simulated.On one hand,the total pressure shows a significant impact on the instabilities of rotating detonation waves.The instability phenomenon is observed in cases with low total pressure(1 MPa)and weakened with the increase of the total pressure.The total pressure has a small impact on the detonation wave velocity and the specific impulse.On the other hand,the equivalence ratio shows a negligible influence on the instabilities,while it affects the ignition process and accounts for the detonation velocity deficit.It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition.Little difference was observed in the thrust with different equivalence ratios of 0.9,1,and 1.4.The highest specific impulse was obtained in the lean fuel cases,which is around 2700 s.The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.

Extraction of Zr(IV) from hydrochloric acid with tri-octyl amine and Cyanex 921 in kerosene

This article reports the extraction of zirconium （IV） from aqueous HC1 solution by tri-octyl amine （TOA）, Cyanex 921, and their binary mixture using kerosene as the diluent. The effect of some parameters on the extraction of Zr（IV） was investigated such as equilibration time, aqueous phase acidity, extractant molarity, chloride ion concentration, nature of diluents, and temperature. The extraction of Zr（IV） was found to be 99% from 7.5 M HC1 using the mixture of extractants containing 0.1 M TOA and 0.02 M Cyanex 921 in kerosene. Kerosene was found to be the effective diluent for the extraction of Zr（IV） with the binary mixture of TOA and Cyanex 921. The positive enthalpy change and positive entropy change in the binary extraction system show the endothermic process with an increase in entropy. Stripping of Zr（IV） from the loaded organic phase containing the mixture of TOA （0.1 M） and Cyanex 921 （0.02 M） indicates that HNO3 and Na2CO3 are the best stripping agents.

Experimental study on heat transfer of aviation kerosene in a vertical upward tube at supercritical pressures

A research on the heat transfer performance of kerosene flowing in a vertical upward tube at supercritical pressure is presented.In the experiments,insights are offered on the effects of the factors such as mass flux,heat flux,and pressure.It is found that increasing mass flux reduces the wall temperature and separates the experimental section into three different parts,while increasing working pressure deteriorates heat transfer.The extended corresponding-state principle can be used for evaluating density and transport properties of kerosene,including its viscosity and thermal conductivity,at different temperatures and pressures under supercritical conditions.For getting the heat capacity,a Soave–Redlich–Kwong(SRK)equation of state is used.The correlation for predicting heat transfer of kerosene at supercritical pressure is established and shows good agreement with the experimental data.

Performance of supersonic model combustors with staged injections of supercritical aviation kerosene

Supersonic model combustors using two-stage injections of supercritical kerosene were experimentally investigated in both Mach 2.5 and 3.0 model combustors with stagnation temperatures of approximately 1,750 K. Supercritical kerosene of approximately 760 K was prepared and injected in the overall equivalence ratio range of 0.5-1.46. Two pairs of integrated injector/flameholder cavity modules in tandem were used to facilitate fuel-air mixing and stable combustion. For single-stage fuel injection at an upstream location, it was found that the boundary layer separation could propagate into the isolator with increasing fuel equivalence ratio due to excessive local heat release, which in turns changed the entry airflow conditions. Moving the fuel injection to a further downstream location could alleviate the problem, while it would result in a decrease in combustion efficiency due to shorter fuel residence time. With two-stage fuel injections the overall combustor performance was shown to be improved and kerosene injections at fuel rich conditions could be reached without the upstream propagation of the boundary layer separation into the isolator. Furthermore, effects of the entry Mach number and pilot hydrogen on combustion performance were also studied.

Experimental study on propagation characteristics of rotating detonation wave with kerosene fuel-rich gas

In this study, kerosene fuel-rich gas produced by the combustion in the gas generator was used as the fuel and oxygen-rich air was used as the oxidant to investigate the propagation characteristics of the rotating detonation wave (RDW). The initiation of the kerosene fuel-rich gas and propagation process of the RDW were analyzed. The influences of the oxygen content in the oxidizer, kerosene mass flow rate of the gas generator, and temperature of the kerosene fuel-rich gas on the propagation process of the RDW were studied. The experimental results revealed that the propagation velocity of the RDW could be improved by increasing the three parameters mentioned above with the kerosene mass flow rate as the strongest factor. The minimum oxygen content that could successfully initiate and maintain the stable propagation of the RDW was 32%, achieving the RDW velocity of 1141.9 m/s. The RDW mainly propagated as two-counter rotating waves and a single wave when the equivalent ratios were 0.62–0.79 and 0.85–0.87, respectively. The highest RDW velocity of 1637.2 m/s was obtained when the kerosene mass flow rate, oxygen content, and equivalent ratio were 74.6 g/s, 44%, and 0.87, respectively.

Kerosene-fueled supersonic combustion modeling based on skeletal mechanisms

A brief review of the recent advances in kerosene-fueled supersonic combustion modeling is present by comparing the fuels,reviewing the kinetic mechanisms,and introducing recent modeling results.The advantages and disadvantages of hydrogen and kerosene for the scramjet combustor are compared to show that kerosene is a more viable fuel option for a Mach number range of 4-8.However,detailed kinetic mechanisms for kerosene,which usually contain thousands of elementary reactions,must be significantly reduced for use in modeling.As of this writing,the smallest skeletal kerosene mechanism has only 19 species and 53 reversible reactions.In contrast to pioneer models based on global chemistry,the current kerosene-fueled supersonic combustion models based on reduced/skeletal chemistry are classified as second-stage.The influence of kinetic mechanisms,global equivalence ratios,inlet Mach number,geometric shape,and domain symmetry are reviewed based on high-fidelity models and available measurements.With the advances in computational technology,models with accurate descriptions of both flow and chemistry are becoming a promising,indispensable approach for the study of supersonic combustion.

Phase Behavior of Sodium Dodecyl Sulfate-n-Butanol-Kerosene-Water Microemulsion System

Experiments were carried out to investigate the influences of cation from electrolytes and acidity/alkalinity on the phase behavior of sodium dodecyl sulfate-n-butanol-organics-water （with electrolytes） microemulsion sys-tem. The organics used is commercial kerosene. The volume ratio of water to organics is 1︰1. The results show that the type and valence of electrolyte cations are important factors influencing the microemulsion behavior. Biva-lent Ca2＋is more effective than monovalent K＋and Na＋for the formation of Winsor type III and II microemulsion. For electrolytes with the same monovalent cation Na＋, i.e. NaCl and Na2CO3, anions in the electrolyte have some effect. Bivalent anion 23CO - leads to a lower activity of cation Na＋than monovalent anion Cl-. NaOH （or KOH） behaves similar with NaCl （or KCl）. When HCl is used as electrolyte, its acidity plays an important role. Phase in-version of microemulsion from type III （or II） to type I is observed through precipitation of Ca2＋using Na2CO3, neutralization of HCl by NaOH, and addition of water to the system, which releases the oil from the microemulsion.

Characteristics of compressible flow of supercritical kerosene

In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10- species surrogate based on the principle of extended corresponding states （ECS）. Isentropic acceleration of supercritical kerosene to subsonic and supersonic speeds has been analyzed numerically. It has been found that the isentropic relationships of supercritical kerosene are significantly dif- ferent from those of ideal gases, A two-stage fuel heating and delivery system is used to heat the kerosene up to a tem- perature of 820 K and pressure of 5.5 MPa with a maximum mass flow rate of 100 g/s. The characteristics of supercritical kerosene flows in a converging-diverging nozzle （Laval nozzle） have been studied experimentally. The results show that stable supersonic flows of kerosene could be established in the temperature range of 730 K-820 K and the measurements in the wall pressure agree with the numerical calculation.

Analysis of safety characteristics of coal-based aviation kerosene

The risk and thermal safety characteristics of GX kerosene,HX kerosene and WX kerosene are studied.Firstly,the explosion lower limits of three kinds of kerosene steams are tested by using the self-made explosion limit measuring system.Then differential scanning calorimeter(DSC)is employed to perform linear heating experiment on kerosene to analyze its thermal decomposition characteristics.The pyrolysis kinetic parameters of three kinds of kerosene are calculated based on the thermal dynamic methods.The experimental results show that the flash point and lower explosion limit of GX kerosene are relatively low.The DSC test shows that the lowest initial decomposition temperature of HX kerosene is 116.5℃.According to pyrolysis kinetics calculation,the T_(D24) and apparent activation energy of HX kerosene are the minimum.ARC test shows that GX kerosene has the worst thermal stability under the adiabatic condition.The high temperature stabilities of the three kinds of kerosene all meet the requirements.On the whole,GX kerosene has the highest hazard,and HX kerosene has the lowest thermal safety.The accumulation of heat should be prevented during the storage and transportation of kerosene.This study provides the crucial safety characteristics data of coal-based aerospace kerosene-based,and provides technical support for engine reliability growth and performance improvement.

Lithium Ion Extraction from the High Ration Mg/Li Salt Lake Brine with Ionic Liquid in Triisobutyl Phosphate and Kerosene

1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fields,especially in

THE EXTRACTION EQUILIBRIUM MODEL AND SIMULATION OF COUNTERCURRENT SOLVENT EXTRACTION OF Gd-Tb-Dy-HCl-HEH(EHP)-KEROSENE SYSTEM

The extraction equilibrium mathematic models for gadolinium,terbium and dysprosium in HCl-1.5 mol/L HEH(EHP)system covering a relatively wide range of lanthanide concentration and acidity,have been developed.There are four independent variables and nine parameters.The average relative error is 4.56%.A computer program for the simulation of the counter current solvent extraetion process has also been written.Thus,the Gd,Tb and Dy concentrations in both aqueous and organic phase in eaeh stage as well as the aqueous acidity may be calculated.Product purities,distribution ratio and extraction factors may also be obtained thereby.The simulation results so obtained may serve as the referenee data for designing solvent ex- traction processes including those processes providing apart from the conventional outgoing organic stream, outgoing raffinate and an extra outgoing third exit stream either organic or aqueous.

Effect of Kerosene Flowing Rate on Microstructure and Wearing Properties for Fe-based Amorphous Coatings

The effects of kerosene flow rate on the microstructure and wearing properties were investigated for Fe-based amorphous coatings sprayed by High Velocity Oxygen Fuel (HVOF).The microstructures and wearing properties of the Fe-based amorphous coatings were analyzed with scanning electron microscope (SEM),X-ray diffraction analyzer (XRD),and ball-on-disc tribometer (CFT-1),respectively.The experimental results show that the well interfacial bonding can be observed between the amorphous coating layer and the substrate,and the porosity in amorphous coating layer is less to 1%.Only some crystalline a-Fe and FeO phases can be detected by XRD in the amorphous coatings,while the amorphous content is up to 99.4%.The wearing coefficient is near to 0.15,which is superior to SUS316 of 0.28.As the increasing of wearing loads,the failure mode is changed from oxidation wear to the composite of oxidation and abrasive wear.

Selection of the Bacteria Being Able to Degrade Kerosene and Study on the Growth Conditions of the Bacteria

[Objective] The study aimed at selecting the predominant strains being able to degrade kerosene and studying its best growth conditions. [Method] Choosing kerosene as the only carbon source, we selected and separated the predominant strains being able to degrade kerosene from the contaminated soil near petrochemical plants, and then optimized the grow conditions of the bacteria. [Result] The best conditions for the bacteria growth were determined as follows, that is, temperature was 30 ℃, pH=7, salinity was 2.5%, and the rotational speed of the thermostatic shake was 190 r/min. Under the optimal conditions, the degradation rate of kerosene by the bacteria cultured for three days reached 42.6%. [Conclusion] The research could provide scientific references for the restoration of polluted soil by kerosene.

Environmentally Harmful Low Density Waste Plastic Conversion into Kerosene Grade Fuel

Plastics wastes from a municipal solid waste (MSW) plant have a high-energy content and are suitable for fuel generation. Thermal cracking is one of the possible ways to obtain petrochemical feedstock from polymer wastes. Municipal waste plastic of LDPE conversion to kerosene grade fuel experiments were carried out under atmospheric conditions at temperatures between 150℃ and 420℃. Low density polyethylene (LDPE) plastic waste (Code #2) was thermally depolymerized in batch process into stainless steel reactor without adding catalyst. The maximum kerosene grade fuel yield is 30%, other grade fuel 60%, light gas 6% and left over residue 4%. The composition, sulphur and Btu value of liquid products were determined by ASTM method. Produced fuel was analyzed by Gas Chromatography and Mass Spectrometer and FT-IR. Very high conversions from LDPE waste plastic to kerosene grade fuel (up to 35%) were obtained while using this technique. Detailed product analyses and characterization lead to a reasonable explanation of reaction pathways and mechanisms.

Performance of a Score-Stove with a Kerosene Burner and the Effect of Pressurization of the Working Fluid

Score-StoveTM a clean-burning cooking stove that also generates electricity was tested using a pressurized kerosene burner. The Score-Stove works on the principle of thermo-acoustics to gen- erate small-scale electricity. The device having hot-end, cold-end and regenerator acts in a way similar to a stirling cycle generating acoustic power, which is then converted to electricity using a linear actuator. It can supply small power for applications such as LED lighting, mobile phone charging and radios particularly in rural areas without grid electricity as well as improving house- hold air pollution. After assessing the needs of the rural communities through a survey, tea-stalls and small restaurants owners were identified as clients with the most potential of using the stove in Bangladesh. Bangladesh University of Engineering and Technology ((BUET) modified a Score- Stove to use both wood and a pressurized kerosene burner of a design that is widely used for cooking in rural areas of Bangladesh. The design was adapted to meet performance needs such as: heating rate, cooking efficiency, energy distribution, electric power generation, exhaust emissions and time taken to boil water using standardized water boiling tests. Performance was also compared with conventional (non-electrically generating) stoves that use a pressurized kerosene burn- er. The Score-Stove performance was then evaluated while increasing the pressure of the sealed working fluid (air in this case) from atmospheric to about 1.4 bar. The pressurization was found to almost double the power generation. An arrangement for utilizing cooling water waste heat was also devised in order to improve the thermal performance of the stove by 18%. Technical deficiencies are documented and recommendations for improvements and future research in order to obtain wider end-user acceptance are made.