Terahertz wave tomographic imaging with a Fresnel lens

We demonstrate three-dimensional tomographic imaging vising a Fresnel lens with broadband terahertz pulses. Objects at various locations along the beam propagation path are uniquely imaged on the same imaging plane using a Fresnel lens with different frequencies of the imaging beam. This procedure allows the reconstruction of an object's tomographic contrast image by assembling the frequency-dependent images.

Experimental far-field imaging properties of high refractive index microsphere lens

The far-field imaging properties of a high index microsphere lens spatially separated from the object are experimentally studied. Our experimental results show that, for a Blu-ray disk whose spacing is 300 nm, the high index microsphere lens also can discern the patterns of the object sample when the distance between the lens and the object is up to 5.4 μm. When the distance is increased from 0 to 5.4 μm, for the microsphere lens with a diameter of 24 μm, the lateral magnification increases from 3.5× to 5.5×, while the field of view decreases from 5.1 to 3.0 μm. By varying the distance between the lens and the object, the optical image can be optimized. We also indicate that the far-field imaging capability of a high index microsphere lens is dependent on the electromagnetic field intensityprofile of the photonic nanojet under different positions of the microsphere lens.

Microball lens integrated fiber probe for optical frequency domain imaging

An integrated microball lens fiber catheter probe is demonstrated, which has better lateral resolution and longer working distance than a corresponding bare fiber probe with diverging beam for Fourier domain optical coherence tomography （FDOCT）. Simulation results are shown to gain the effect of the distance between the mieroball lens and the bare fiber to the focusing plane and beam width. The freedom of modifying the working distance and lateral resolution is shown. This is achieved by changing the gap distance between the single-mode fiber and the microball lens within the packaged surgical needle catheter without using an additional beam expander having a fixed length. The probe successfully acquired crosssectional images of ocular tissues from an animal sample with the proposed miniaturized imaging probe.

High-speed 3D imaging based on structured illumination and electrically tunable lens

In this Letter, we present a high-speed volumetric imaging system based on structured illumination and an electrically tunable lens（ETL）, where the ETL performs fast axial scanning at hundreds of Hz. In the system,a digital micro-mirror device（DMD） is utilized to rapidly generate structured images at the focal plane in synchronization with the axial scanning unit. The scanning characteristics of the ETL are investigated theoretically and experimentally. Imaging experiments on pollen samples are performed to verify the optical cross-sectioning and fast axial scanning capabilities. The results show that our system can perform fast axial scanning and threedimensional（3D） imaging when paired with a high-speed camera, presenting an economic solution for advanced biological imaging applications.

How to co-add images? I. A new iterative method for image reconstruction of dithered observations

By employing the previous Voronoi approach and replacing its nearest neighbor approx- imation with Drizzle in iterative signal extraction, we develop a fast iterative Drizzle algorithm, namedfiDrizzle, to reconstruct the underlying band-limited image from undersampled dithered frames. Compared with the existing iDrizzle, the new algorithm improves rate of convergence and accelerates the computational speed. Moreover, under the same conditions （e.g. the same number of dithers and iterations）, fiDrizzle can make a better quality reconstruction than iDrizzle, due to the newly discov- ered High Sampling caused Decelerating Convergence （HSDC） effect in the iterative signal extraction process.fiDrizzle demonstrates its powerful ability to perform image deconvolution from undersampled dithers.

Fabrication of opaque and transparent 3D structures using a single material via twophoton polymerisation lithography

Two-photon polymerisation lithography enables the three-dimensional(3D)-printing of high-resolution micron-and nano-scale structures.Structures that are 3D-printed using proprietary resins are transparent and are suitable as optical components.However,achieving a mix of opaque and transparent structures in a single optical component is challenging and requires multiple material systems or the manual introduction of ink after fabrication.In this study,we investigated an overexposure printing process for laser decomposition,which typically produces uncontrollable and random‘burnt’structures.Specifically,we present a printing strategy to control this decomposition process,realising the on-demand printing of opaque or transparent structures in a single lithographic step using a single resin.Using this method,opaque structures can be printed with a minimum feature size of approximately 10μm,which exhibit<15%transmittance at a thickness of approximately 30μm.We applied this process to print an opaque aperture integrated with a transparent lens to demonstrate an improved imaging contrast.