Thin-slab continuous casting and rolling technology is a process integrating casting and plastic deformation. In this study,targeting actions such as slab deformation and liquid core flows during the process of liquid...Thin-slab continuous casting and rolling technology is a process integrating casting and plastic deformation. In this study,targeting actions such as slab deformation and liquid core flows during the process of liquid core reduction on thin-slab continuous casting, suggests the fluid-solid coupling method should be used to research the characteristic and patterns of slab deformation during the liquid core reduction process, as well as research liquid core backflows. A material model of the slab shell was obtained through the high-temperature compression test of the cast steel. The analysis of the fluid-solid coupling simulation for liquid core reduction shows that slab deformation concentrates on the narrow side due to the existence of the liquid core. Meanwhile,the stress and strain increases with the increase of the reduction rate and slab thickness. The changing trends of stress and strain are identical under various conditions. The results demonstrate that using greater reduction at the upper part of the slab, which has a higher temperature and thinner slab,is beneficial to the quality of the slab. Moreover,the liquid core is extruded as the reduction is implemented. The quantity of the extrusion increases with the increase of reduction rate and the thickness of thinner shell, which leads to fluctuation of the mould level, making the operation more difficult.展开更多
We demonstrate stimulated supercontinuum-radiation of carbon disulfide （CS2） influenced by biological molecules all-trans-stimulated Raman scattering, stimulated Brillouin scattering, all-trans-β-carotene, liquid c...We demonstrate stimulated supercontinuum-radiation of carbon disulfide （CS2） influenced by biological molecules all-trans-stimulated Raman scattering, stimulated Brillouin scattering, all-trans-β-carotene, liquid core optical fibre-carotene in liquid core optical fibre （LCOF）. By virtue of the broad fluorescence characteristics and large third-order optical nonlinearities of all-trans-β-carotene, the high-order Stokes lines of stimulated Raman scattering （SRS） and the multi-order Stokes lines of stimulated Brillouin scattering （SBS） excitated by SRS are observed at low input-laser energies. The results indicate that the fluorescence not only enhances the SRS, but also the SBS. These Stokes lines generate the SRS-SBS supercontinuum radiation （RBSR）. A flat-amplitude bandwidth of 110 nm from 515 nm to 625 nm is observed when a frequency-doubled Nd：YAG laser at 532 nm with an energy of 0.86 mJ is used. This result is expected to be useful for the multi-wavelength fibre laser.展开更多
A two-dimensional model was applied to simulate the liquid core reduction (LCR) technology of bloom CC using ANSYS software. The deformation characteristics of bloom under different liquid fraction and reducing amount...A two-dimensional model was applied to simulate the liquid core reduction (LCR) technology of bloom CC using ANSYS software. The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained. The results indicate that the main deformation condition of bloom shell is compressive strain, mainly undertaken by the liquid core, which increases with the enhancement of reducing amount. Solidified shell takes minor deformation. The longitudinal section of bloom appears sunken and the narrow side bulges, which grow serious when the liquid fraction increases.展开更多
Using ABAQUS FEM software,the Elastic-plastic with isotropic hardening model is applied to simulate 3D cylinder slab rolling forming in continuous casting (CC),the change of liquid core before slab solidification comp...Using ABAQUS FEM software,the Elastic-plastic with isotropic hardening model is applied to simulate 3D cylinder slab rolling forming in continuous casting (CC),the change of liquid core before slab solidification completely on soft re- duction process is studied,the analyse result shows the soft reduction technique can change the liquid core size,which is useful to cylinder slab forming in CC.展开更多
The parameters of Earth free core nutation (FCN) are two relatively significant geophysical parameters. Sasao et al. (1980) and Wahr and Bergen (1986) provided the theoretical estimation values of FCN parameters. Gwin...The parameters of Earth free core nutation (FCN) are two relatively significant geophysical parameters. Sasao et al. (1980) and Wahr and Bergen (1986) provided the theoretical estimation values of FCN parameters. Gwinn, Herring and Shapiro (1987) first obtained the observational values of FCN parameters by very long base Interference (VLBI) at Cambridge University. In the same year, Neuberg and Zurn in former West Germany and Hinderer in France began to retrieve FCN parameters by the observation of gravity tides and introduced the stacking method. The other scholars who researched into the same geophysical problems by applying the data of gravity tides basically followed the stacking method. The results they reached were similar to the observational result of FCN parameters given by Neuberg et al. in 1987. But the observational results of FCN parameters gained from gravity tides were not identical with those from VLBI, mainly because of the large difference of quality of FCN. So there was not an affirmative observational result of FCN parameters since then. In this paper, The authors firstly introduce the tri-frequency spectrum method with clearly geometrical and geophysical meaning for the resolution of FCN parameters , and the observational results of FCN parameters obtained from tide data at three superconducting gravity stations were accordant with those from VLBI, which will be relatively important to arriving at a certain observational result of FCN parameters.展开更多
Based on the 28 series of the high precision and high minute sampling tidal gravity observations at 20 stations in Global Geodynamics Project (GGP) network, the resonant parameters of the Earth's nearly diurnal fr...Based on the 28 series of the high precision and high minute sampling tidal gravity observations at 20 stations in Global Geodynamics Project (GGP) network, the resonant parameters of the Earth's nearly diurnal free wobble (including the eigenperiods, resonant strengths and quality factots) are precisely determined. The discrepancy of the eigenperiod between observed and theoretical values is studied, the important conclusion that the real dynamic ellipticity of the liquid core is about 5% larger than the one under the static equilibrium assumption is approved by using our gravity technique. The experimental Earth's tidal gravity models with considering the nearly diurnal free wobble of the Earth's liquid core are constructed in this study. The numerical results show that the difference among three experimental models is less than 0.1%, and the largest discrepancy compared to those widely used nowdays given by Dehant (1999) and Mathews (2001) is only about 0.4%. It can provide with the most recent real experimental tidal gravity models for the global study of the Earth's tides, geodesy and space techniques and so on.展开更多
The rotation of the Earth's liquid core creates the Nearly Diurnal Free Wobble (NDFW). It is one of the problems of researching the Earth's liquid core for us to retrieve the parameters of the Earth's Free...The rotation of the Earth's liquid core creates the Nearly Diurnal Free Wobble (NDFW). It is one of the problems of researching the Earth's liquid core for us to retrieve the parameters of the Earth's Free Core Nutation (FCN),from the Earth's liquid core resonance of gravity tide waves on the diurnal frequency band. Since 1987, some scientists in many different countries have come to calculate the parameters of FCN by using the observational data of gravity tide waves on the diumal frequency band. They basically followed the Stacking method, which needed five diurnal waves for the resolution. In this paper, authors introduced the Aky-Btk value method with clearly geometrical meaning as a new method, which only requires three very high signal-noise-ratio waves o1, K1 and P1 for the resolution. Authors chose the observational data of the three superconducting gravimeter stations respectively located in Cantley of Canada, Wuhan of China and Brussels of Belgium, to compute the parameters of FCN. It was the first time that the observational results of the parameters of FCN obtained from gravitational tide were in accord with the parameters of FCN gained from VLBI since 1987.展开更多
Novel preparation method of microencapsules was developed on the basis of the liquid coalescence method followed by phase separation. Oil droplets of limonene dissolving expanded polystyrene as a shell material were f...Novel preparation method of microencapsules was developed on the basis of the liquid coalescence method followed by phase separation. Oil droplets of limonene dissolving expanded polystyrene as a shell material were forced to collide and coalesce with the Isopar oil droplets of core material in the continuous wates phase. When two kinds of oil droplets are collided and coalesced with each other, expanded polystyrene dissolved in the limonene oil may be phase-separated in the oil droplets newly formed to form the microcapsule shell, because the Isopar oil was a poor solvent for expanded polystyrene but a good solvent for the limonene oil. In the experiment, the diameter (or number) of limonene oil droplets dissolving expanded polystyrene was mainly changed, because the coalescence frequency between the droplets is strongly dependent on the number of droplets. Favorable core shell types of microcapsules with the shell thickness from 1.0 to 5.0 μm were able to be prepared under all the experimental conditions adopted here.展开更多
文摘Thin-slab continuous casting and rolling technology is a process integrating casting and plastic deformation. In this study,targeting actions such as slab deformation and liquid core flows during the process of liquid core reduction on thin-slab continuous casting, suggests the fluid-solid coupling method should be used to research the characteristic and patterns of slab deformation during the liquid core reduction process, as well as research liquid core backflows. A material model of the slab shell was obtained through the high-temperature compression test of the cast steel. The analysis of the fluid-solid coupling simulation for liquid core reduction shows that slab deformation concentrates on the narrow side due to the existence of the liquid core. Meanwhile,the stress and strain increases with the increase of the reduction rate and slab thickness. The changing trends of stress and strain are identical under various conditions. The results demonstrate that using greater reduction at the upper part of the slab, which has a higher temperature and thinner slab,is beneficial to the quality of the slab. Moreover,the liquid core is extruded as the reduction is implemented. The quantity of the extrusion increases with the increase of reduction rate and the thickness of thinner shell, which leads to fluctuation of the mould level, making the operation more difficult.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10774057 and 10974067)
文摘We demonstrate stimulated supercontinuum-radiation of carbon disulfide （CS2） influenced by biological molecules all-trans-stimulated Raman scattering, stimulated Brillouin scattering, all-trans-β-carotene, liquid core optical fibre-carotene in liquid core optical fibre （LCOF）. By virtue of the broad fluorescence characteristics and large third-order optical nonlinearities of all-trans-β-carotene, the high-order Stokes lines of stimulated Raman scattering （SRS） and the multi-order Stokes lines of stimulated Brillouin scattering （SBS） excitated by SRS are observed at low input-laser energies. The results indicate that the fluorescence not only enhances the SRS, but also the SBS. These Stokes lines generate the SRS-SBS supercontinuum radiation （RBSR）. A flat-amplitude bandwidth of 110 nm from 515 nm to 625 nm is observed when a frequency-doubled Nd：YAG laser at 532 nm with an energy of 0.86 mJ is used. This result is expected to be useful for the multi-wavelength fibre laser.
文摘A two-dimensional model was applied to simulate the liquid core reduction (LCR) technology of bloom CC using ANSYS software. The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained. The results indicate that the main deformation condition of bloom shell is compressive strain, mainly undertaken by the liquid core, which increases with the enhancement of reducing amount. Solidified shell takes minor deformation. The longitudinal section of bloom appears sunken and the narrow side bulges, which grow serious when the liquid fraction increases.
基金Funded by Ph.D Researcher Foundation of Wuhan University of Technology(No.471-38300869),China.
文摘Using ABAQUS FEM software,the Elastic-plastic with isotropic hardening model is applied to simulate 3D cylinder slab rolling forming in continuous casting (CC),the change of liquid core before slab solidification completely on soft re- duction process is studied,the analyse result shows the soft reduction technique can change the liquid core size,which is useful to cylinder slab forming in CC.
基金This work was supported by the National Natural Science Foundation of China (Grant No.40074018).
文摘The parameters of Earth free core nutation (FCN) are two relatively significant geophysical parameters. Sasao et al. (1980) and Wahr and Bergen (1986) provided the theoretical estimation values of FCN parameters. Gwinn, Herring and Shapiro (1987) first obtained the observational values of FCN parameters by very long base Interference (VLBI) at Cambridge University. In the same year, Neuberg and Zurn in former West Germany and Hinderer in France began to retrieve FCN parameters by the observation of gravity tides and introduced the stacking method. The other scholars who researched into the same geophysical problems by applying the data of gravity tides basically followed the stacking method. The results they reached were similar to the observational result of FCN parameters given by Neuberg et al. in 1987. But the observational results of FCN parameters gained from gravity tides were not identical with those from VLBI, mainly because of the large difference of quality of FCN. So there was not an affirmative observational result of FCN parameters since then. In this paper, The authors firstly introduce the tri-frequency spectrum method with clearly geometrical and geophysical meaning for the resolution of FCN parameters , and the observational results of FCN parameters obtained from tide data at three superconducting gravity stations were accordant with those from VLBI, which will be relatively important to arriving at a certain observational result of FCN parameters.
基金supported jointly by the National Outstanding Youth Science Foundation of China (Grant No.49925411)the Knowledge Innovation Project of the Chinese Academy of Sciences(Grant No.KZCX3-CW-131)the National Natural Science Foundation of China(Grant No.40174022).
文摘Based on the 28 series of the high precision and high minute sampling tidal gravity observations at 20 stations in Global Geodynamics Project (GGP) network, the resonant parameters of the Earth's nearly diurnal free wobble (including the eigenperiods, resonant strengths and quality factots) are precisely determined. The discrepancy of the eigenperiod between observed and theoretical values is studied, the important conclusion that the real dynamic ellipticity of the liquid core is about 5% larger than the one under the static equilibrium assumption is approved by using our gravity technique. The experimental Earth's tidal gravity models with considering the nearly diurnal free wobble of the Earth's liquid core are constructed in this study. The numerical results show that the difference among three experimental models is less than 0.1%, and the largest discrepancy compared to those widely used nowdays given by Dehant (1999) and Mathews (2001) is only about 0.4%. It can provide with the most recent real experimental tidal gravity models for the global study of the Earth's tides, geodesy and space techniques and so on.
文摘The rotation of the Earth's liquid core creates the Nearly Diurnal Free Wobble (NDFW). It is one of the problems of researching the Earth's liquid core for us to retrieve the parameters of the Earth's Free Core Nutation (FCN),from the Earth's liquid core resonance of gravity tide waves on the diurnal frequency band. Since 1987, some scientists in many different countries have come to calculate the parameters of FCN by using the observational data of gravity tide waves on the diumal frequency band. They basically followed the Stacking method, which needed five diurnal waves for the resolution. In this paper, authors introduced the Aky-Btk value method with clearly geometrical meaning as a new method, which only requires three very high signal-noise-ratio waves o1, K1 and P1 for the resolution. Authors chose the observational data of the three superconducting gravimeter stations respectively located in Cantley of Canada, Wuhan of China and Brussels of Belgium, to compute the parameters of FCN. It was the first time that the observational results of the parameters of FCN obtained from gravitational tide were in accord with the parameters of FCN gained from VLBI since 1987.
文摘Novel preparation method of microencapsules was developed on the basis of the liquid coalescence method followed by phase separation. Oil droplets of limonene dissolving expanded polystyrene as a shell material were forced to collide and coalesce with the Isopar oil droplets of core material in the continuous wates phase. When two kinds of oil droplets are collided and coalesced with each other, expanded polystyrene dissolved in the limonene oil may be phase-separated in the oil droplets newly formed to form the microcapsule shell, because the Isopar oil was a poor solvent for expanded polystyrene but a good solvent for the limonene oil. In the experiment, the diameter (or number) of limonene oil droplets dissolving expanded polystyrene was mainly changed, because the coalescence frequency between the droplets is strongly dependent on the number of droplets. Favorable core shell types of microcapsules with the shell thickness from 1.0 to 5.0 μm were able to be prepared under all the experimental conditions adopted here.
