Theoretical characterization of the temperature-dependent saturation magnetization of magnetic metallic materials

Based on the force-heat equivalence energy density principle,a theoretical model for magnetic metallic materials is developed,which characterizes the temperature-dependent magnetic anisotropy energy by considering the equivalent relationship between magnetic anisotropy energy and heat energy;then the relationship between the magnetic anisotropy constant and saturation magnetization is considered.Finally,we formulate a temperature-dependent model for saturation magnetization,revealing the inherent relationship between temperature and saturation magnetization.Our model predicts the saturation magnetization for nine different magnetic metallic materials at different temperatures,exhibiting satisfactory agreement with experimental data.Additionally,the experimental data used as reference points are at or near room temperature.Compared to other phenomenological theoretical models,this model is considerably more accessible than the data required at 0 K.The index included in our model is set to a constant value,which is equal to 10/3 for materials other than Fe,Co,and Ni.For transition metals(Fe,Co,and Ni in this paper),the index is 6 in the range of 0 K to 0.65T_(cr)(T_(cr) is the critical temperature),and 3 in the range of 0.65T_(cr) to T_(cr),unlike other models where the adjustable parameters vary according to each material.In addition,our model provides a new way to design and evaluate magnetic metallic materials with superior magnetic properties over a wide range of temperatures.

A review on in vitro corrosion performance test of biodegradable metallic materials

Extensive in vitro corrosion test systems have been carried out to simulate the in vivo corrosion behavior of biodegradable metallic materials. Various methods have their own unique benefits and limitations. The corrosion mechanism of biodegradable alloys and in vitro corrosion test systems on biodegradable metallic materials are reviewed, to build a reasonable simulated in vitro test system for mimicking the in vivo animal test from the aspects of electrolyte solution selection, surface roughness influence, test methods and evaluation methodology of corrosion rate. Buffered simulated body fluid containing similar components to human blood plasma should be applied as electrolyte solution, such as simulated body fluid （SBF） and culture medium with serum. Surface roughness of samples and ratio of solution volume to sample surface area should be adopted based on the real implant situation, and the dynamic corrosion is preferred. As to the evaluation methodology of corrosion rate, different methods may complement one another.

EFFECT OF STRAIN RATE(?) ON STRAIN HARDENING EXPONENT n OF SOME METALLIC MATERIALS

Variable strain rate tension tests for 4 metallic materials show that as the strain rate in creases the strain hardening exponent n decreases. The trend follows a two stage linear relation between n and Ig (?). When (?) < (?)cp, i.e. under quasi-static loading, n can be considered as a constant, but when (?)>(?)cp, n decreases rapidly till an ideal plastic state. n = 0. The characterizations and mechanisms of softening induced by high (?) are discussed.

Degree of polarization based on the three-component pBRDF model for metallic materials

An expression of degree of polarization（DOP） for metallic material is presented based on the three-component polarized bidirectional reflectance distribution function（p BRDF） model with considering specular reflection, directional diffuse reflection and ideal diffuse reflection. The three-component p BRDF model with a detailed reflection assumption is validated by comparing simulations with measurements. The DOP expression presented in this paper is related to surface roughness, which makes it more reasonable in physics. Test results for two metallic samples show that the DOP based on the three-component p BRDF model accords well with the measurement and the error of existing DOP expression is significantly reduced by introducing the diffuse reflection. It indicates that our DOP expression describes the polarized reflection properties of metallic surfaces more accurately.

Model of bidirectional reflectance distribution function for metallic materials

Based on the three-component assumption that the reflection is divided into specular reflection,directional diffuse reflection,and ideal diffuse reflection,a bidirectional reflectance distribution function（BRDF） model of metallic materials is presented.Compared with the two-component assumption that the reflection is composed of specular reflection and diffuse reflection,the three-component assumption divides the diffuse reflection into directional diffuse and ideal diffuse reflection.This model effectively resolves the problem that constant diffuse reflection leads to considerable error for metallic materials.Simulation and measurement results validate that this three-component BRDF model can improve the modeling accuracy significantly and describe the reflection properties in the hemisphere space precisely for the metallic materials.

Novel Ring Compression Test Method to Determine the Stress-Strain Relations and Mechanical Properties of Metallic Materials

Although there are methods for testing the stress-strain relation and strength,which are the most fundamental and important properties of metallic materials,their application to small-volume materials and tube components is lim-ited.In this study,based on energy density equivalence,a new dimensionless elastoplastic load-displacement model for compressed metal rings with isotropy and constitutive power law is proposed to describe the relations among the geometric dimensions,Hollomon law parameters,load,and displacement.Furthermore,a novel test method was developed to determine the elastic modulus,stress-strain relation,yield and tensile strength via ring compression test.The universality and accuracy of the method were verified within a wide range of imaginary materials using finite element analysis(FEA),and the results show that the stress-strain curves obtained by this method are consistent with those inputted in the FEA program.Additionally,a series of ring compression tests were performed for seven metallic materials.It was found that the stress-strain curves and mechanical properties predicted by the method agreed with the uniaxial tensile results.With its low material consumption,the ring compression test has the potential to be as an alternative to traditional tensile test when direct tension method is limited.

South China University of fechnology Advanced Metallic Materials Research and Processing Technology Center

A dvanced Metallic Materials Research and Processing Technology Center was found in December 1998. As a unit under The College of Mechanical Engineering, the Center is an expansion of the former Cast and Composite Materials Research Group, which was found in the early eighties of last century. The Center is focusing in the basic and applied research, and development of advanced metallic materials and their processing technology. It also functions as an organization

Continued Diagnostic Difficulties in Preoperatively Differentiating Lipiodized Oil and Residual Metallic Material: A Case Report

Retained foreign objects in the abdomen and pelvis are serious clinical problems yet the imaging required can present difficulties. Prolonged retention of lipiodized oil used for hysterosalpingography over years is very rare. However, lipiodized oil had previously been misdiagnosed as residual metallic material. We are reporting a case in which the latest computed tomography (CT) equipment seemed inadequate for obtaining a clear pre-operative diagnosis. Here, we describe the case of a 33-year-old Japanese female whose pelvis had contained retained lipiodized oil that had been suspected as residual metallic material. The preoperative diagnosis was very difficult and included three-dimensional computed tomography (3D-CT) of unclear results despite expectations of resolution. By laparoscopic surgery, we removed a cyst of approximately 2 cm containing a yellowish oily fluid. Postoperatively, we demonstrated that the fluid was lipiodized oil. A postoperative experiment to attempt distinguishing lipiodized oil from metal through gemstone spectral CT imaging did not offer clarity either. Distinguishing between retained lipiodized oil and metallic material in the abdominal cavity may still present unexpected difficulties even with the latest medical equipments.

Property evolution and service life prediction of novel metallic materials for future lunar bases

While lunar bases have been a focus of development in recent years,the complex and extreme environment of the lunar surface remains a considerable challenge for lunar exploration.Unlike those on Earth,lunar day and night temperature variations cause the properties of materials,especially metallic materials,to evolve in completely different manners.In this study,we investigated the property evolution of nine typical highperformance metallic materials using laboratory simulations of the extremely long-period lunar temperature environment.While lunation treatment improves the properties of all metallic materials,the microscopic mechanisms vary for amorphous and crystalline alloys with different structures.The treatment reduces both the loosely packed regions and heterogeneity in amorphous alloys while causing significant phase changes in crystalline alloys.Furthermore,a conservative prediction of the service life of metallic materials on lunar bases is provided based on analyzing microplastic events,followed by the practical material selection recommendations in various lunar application scenarios.

Capillary Property of Entangled Porous Metallic Wire materials and Its Application in Fluid Buffers:Theoretical Analysis and Experimental Study

Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of equipment.Based on the capillary property entangled porous metallic wire materials(EPMWM),this paper designed a composite buffer which uses EPMWM and viscous fluid as cushioning materials under the low-speed impact of the recoil force device of weapon equipment(such as artillery,mortar,etc.).Combined with the capillary model,porosity,hydraulic diameter,maximum pore diameter and pore distribution were used to characterize the pore structure characteristics of EPMWM.The calculation model of the damping force of the composite buffer was established.The low-speed impact test of the composite buffer was conducted.The parameters of the buffer under low-speed impact were identified according to the model,and the nonlinear model of damping force was obtained.The test results show that the composite buffer with EPMWM and viscous fluid can absorb the impact energy from the recoil movement effectively,and provide a new method for the buffer design of weapon equipment(such as artillery,mortar,etc.).

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

Twin-roll strip casting of advanced metallic materials

Metallic materials have historic and served as critical enablers of human progress,wealth,and wellbeing over millennia.Recently,the global demand for the development of environment-friendly and energy-saving technology has been increasing,with the aim to support the sustainability of metallic materials.Twin-roll strip casting(TRC)is one of the most cutting-edge technologies and a near-net-shape manufacturing method in the steel industry,which conforms to the green fabrication trend of next-generation high-performance metallic materials.By utilizing the dominant characteristics of sub-rapid solidification,and integration of solidification,solid-state transformation,and deformation;TRC has become a meaningful way to deal with the most challenging issues in the processing of metallic materials,and made a significant contribution to materials manufacturing.Hence,we review the TRC process of various metallic materials,including plain carbon steels,stainless steels,Fe-Si electrical steels,high-strength steels,clad steels,aluminum alloys,magnesium alloys,metallic glasses,and so on.This paper offers an outlook of future opportunities for various advanced metallic materials development through the TRC process,and inspires more in-depth research.

Recent advances in tribological and wear properties of biomedical metallic materials

Biomedical metallic materials are commonly used in the repair and replacement of human tissues.After the materials are implanted in the human body,the implants can rub against human tissue or other implants,resulting in wear and tear of the implants.The wear and tear of implants in the human body can lead to osteolysis and inflammation,which can affect the longevity of the implant and human health.For the sake of human health and the longevity of implants,it is essential to study the frictional and wear properties of biomedical metallic materials.The present review summarizes the current research on the frictional and wear properties of biomedical metallic materials in recent years,as well as the methods and techniques to improve the frictional and wear properties of the materials.The significance of the present review lies in that it could provide momentus information for further investigation of the tribological properties of biomedical metallic materials.

Research of Electromagnetic Field on Several Metallic Materials and Processing

The research activities in EPM for several metallic materials are classified in the application of different magnetic field.The following research is exhibited in this article,(1)Effect of magnetic field on solidification process of monotectic alloys;(2)Effect of high magnetic field on fabrication of high-strength and high-conductivity copper alloys;(3)Numerical simulation of magnetic field and fluid flow in continuous casting mold with vertical electromagnetic brake;(4)Research on solidification structure of superalloy with EMS;(5)Effects of static magnetic field on the behavior of meniscus in a mold under argon gas injection.

STUDY ON A NEW APPROACH OF CAVITATION EROSION TEST FOR NONMETALLIC MATERIALS

This paper deals with the reconstruction and innovation of an ordinary magnetostriction apparatus for cavitation erosion tests of non metallic materials. It aims at making testing specimen to be independent of amplitude amplifier rod, thus overcoming the difficulties of fixing tightly the non metallic specimen to the vibrating rod. Such approach makes the exposure area greatly increased and effectively mitigates the effect of non homogeneity of non metallic specimen on the testing results, thus extending the application of magnetostriction apparatus to carry out cavitation erosion tests to larger size of non metallic and non homogeneous materials. It will render a set of new innovative apparatus and recently developed method to conduct fast and simple cavitation erosion test in days to come. Simultaneously, several tests on non metallic materials have been made by means of such new apparatus, yielding satisfactory results and witnessing the availability of new methods.

A Review of Anode Materials for Dual‑Ion Batteries

Distinct from"rockingchair"lithium-ion batteries(LIBs),the unique anionic intercalation chemistry on the cathode side of dual-ion batteries(DIBs)endows them with intrinsic advantages of low cost,high voltage,and ecofriendly,which is attracting widespread attention,and is expected to achieve the next generation of large-scale energy storage applications.Although the electrochemical reactions on the anode side of DIBs are similar to that of LIBs,in fact,to match the rapid insertion kinetics of anions on the cathode side and consider the compatibility with electrolyte system which also serves as an active material,the anode materials play a very important role,and there is an urgent demand for rational structural design and performance optimization.A review and summarization of previous studies will facilitate the exploration and optimization of DIBs in the future.Here,we summarize the development process and working mechanism of DIBs and exhaustively categorize the latest research of DIBs anode materials and their applications in different battery systems.Moreover,the structural design,reaction mechanism and electrochemical performance of anode materials are briefly discussed.Finally,the fundamental challenges,potential strategies and perspectives are also put forward.It is hoped that this review could shed some light for researchers to explore more superior anode materials and advanced systems to further promote the development of DIBs.

IGNITING SHS BY LASER AND ITS APPLICATION TO SELECTIVE LASER SINTERING OF METALLIC POWDER MATERIAL

How to directly fabricate metallic functional parts with selective laser sintering (SLS) process is a potential technique that scientists are researching. Existent problems during directly fabricating metal part by use of SLS are analyzed. For the sake of solving the problems, a new idea of adding self-propagating high-temperature synthesis (SHS) material into metallic powder material to form new type of SLS metallic powder material is put forward. This powder material can release controllable amount of heat during its interaction with the laser beam energy to reduce the requirement to laser power during directly sintering metallic part, to prolong the time of metallic liquid phase existing, and to improve the intensity and accuracy of SLS part. For this reason, SHS material′s interaction with the CO2 laser beam energy is researched, which proves that CO2 laser beam energy may instantly ignite SHS reaction. On the basis of the above-mentioned researches, the effect of sintering the metal powder material mixing SHS material with CO2 laser is also researched, which shows: there is an optimal blending ratio of various material in the new metallic powder material. Under the optimal blending ratio and SLS process parameters, this new metallic powder material can indeed release amount of heat and SHS reaction may be controlled within the laser sintering. This research result makes it possible that the metallic part is directly sintered with small CO2 laser (less than 50W), which may greatly reduce the volume, cost and running expenditure of SLS machine, be propitious to application.

Experimental Research of Electronic Devices Thermal Control Using Metallic Phase Change Materials

A Phase-change thermal control unit( PTCU) filled with metallic phase change material( PCM) Bismuth alloy for electric devices thermal protection was developed and investigated experimentally. The PTCU filled with PCM was designed and manufactured. Resistance heating components( RCHs) produced 1 W,3 W, 5 W,7W,and 10 W for simulating heat generation of electronic devices. At various heating power levels,the performance of PTCU were tested during heating period and one duty cycle period. The experimental results show that the PTCU delays RCH reaching the maximum operating temperature. Also,a numerical model was developed to enable interpretation of experimental results and to perform parametric studies. The results confirmed that the PTCU is suitable for electric devices thermal control.

Mechanical behavior of entangled metallic wire materials-polyurethane interpenetrating composites

Composite materials exhibit the impressive mechanical properties of high damping and stiffness,which cannot be attained by employing conventional single materials.Along these lines,a novel material architecture is presented in this work in order to fabricate composites with enhanced mechanical characteristics.More specifically,entangled metallic wire materials were used as the active matrix,whereas polyurethane was employed as the reinforcement elements.As a result,an entangled metallic wire material-polyurethane composite with high damping and stiffness was prepared by enforcing the vacuum infiltration method.On top of that,the mechanical properties(loss factor,energy consumption,and average stiffness)of the proposed composite materials were characterized by performing dynamic tests,and its fatigue characteristics were verified by the micro-interface bonding,as well as the macro-damage factor.The impact of the density,preloading spacing,loading amplitude,and exciting frequency on the mechanical properties of the composites were also thoroughly analyzed.The extracted results indicate that the mechanical properties of the composites were significantly enhanced than those of the pure materials due to the introduction of interface friction.Moreover,the average stiffness of the composites was about 10 times the respective value of the entangled metallic wire material.Interestingly,a rise in the loading period leads to some failure between the composite interfaces,which reduces the stiffness property but enhances the damping dissipation properties.Finally,a comprehensive dynamic mechanical model of the composites was established,while it was experimentally verified.The proposed composites possess higher damping features,i.e.,stiffness characteristics,and maintain better fatigue characteristics,which can broaden the application range of the composites.In addition,we provide a theoretical and experimental framework for the research and applications in the field of metal matrix composites.