Method of reverberation ray matrix for static analysis of planar framed structures composed of anisotropic Timoshenko beam members

Based on the method of reverberation ray matrix（MRRM）, a reverberation matrix for planar framed structures composed of anisotropic Timoshenko（T） beam members containing completely hinged joints is developed for static analysis of such structures.In the MRRM for dynamic analysis, amplitudes of arriving and departing waves for joints are chosen as unknown quantities. However, for the present case of static analysis, displacements and rotational angles at the ends of each beam member are directly considered as unknown quantities. The expressions for stiffness matrices for anisotropic beam members are developed. A corresponding reverberation matrix is derived analytically for exact and unified determination on the displacements and internal forces at both ends of each member and arbitrary cross sectional locations in the structure. Numerical examples are given and compared with the finite element method（FEM） results to validate the present model. The characteristic parameter analysis is performed to demonstrate accuracy of the present model with the T beam theory in contrast with errors in the usual model based on the Euler-Bernoulli（EB） beam theory. The resulting reverberation matrix can be used for exact calculation of anisotropic framed structures as well as for parameter analysis of geometrical and material properties of the framed structures.

A procedure of the method of reverberation ray matrix for the buckling analysis of a thin multi-span plate

A procedure of the method of reverberation ray matrix(MRRM)is developed to perform the buckling analysis of thin multi-span rectangular plates having internal line supports or stiffeners.A computation algorithm for the reverberation ray matrix in the MRRM is derived to determine the buckling loading.Specifically,the analytical solutions are presented for the buckling of the structure having two opposite simply-supported or clamped-supported edges with spans,while the constraint condition of two remaining edges may be in any combination of free,simply-supported,and clamped boundary conditions.Furthermore,based on the analysis of matrices relating to the unknown coefficients in the solution form for the deflection in terms of buckling modal functions,some recursive equations(REs)for the MRRM are introduced to generate a reduced reverberation ray matrix with unchanged dimension when the number of spans increases,which promotes the computation efficiency.Several numerical examples are given,and the present results are compared with the known solutions to illustrate the validity and accurateness of the MRRM for the buckling analysis.

黏弹性Pasternak地基上两跨连续Timoshenko梁横向自振特性分析

以黏弹性Pasternak地基上的Timoshenko梁为研究对象,研究其在两端简支、两端固支、简支-固支边界条件下的单跨地基梁及两跨连续地基梁(等跨和不等跨两种工况)的自振频率、衰减系数和模态。基于回传射线矩阵法,根据各种约束条件下的节点耦合条件,推导横向振动频率方程,通过观察两跨连续地基梁与单跨地基梁的频率方程,并通过具体算例,研究两跨连续地基梁与单跨地基梁自振频率之间的联系与区别,进一步给出前三阶模态。结果表明:两等跨连续地基梁自振频率方程可分为两个部分,且这两部分分别与两端简支和简支-固支边界条件下单跨地基梁的频率方程形式类同;其奇数阶自振频率与两端简支边界条件下单跨地基梁的偶数阶自振频率相等,而其偶数阶自振频率则与两端固支边界条件下单跨地基梁的偶数阶自振频率相同;不等跨的两跨连续Timoshenko地基梁的模态函数曲线幅值随阶数的增加降低最快。

经典边界条件黏弹性Pasternak地基上Bernoulli-Euler梁横向自振特性分析

自振特性在结构的动力分析中具有重要的意义。将回传射线矩阵法(MRRM)推广到地基梁自振特性的研究中,通过节点力平衡和位移协调方程及对偶局部坐标系下单元相位关系,建立两端简支、两端自由、两端固支、简支-自由、简支-固支及固支-自由这六种边界条件下黏弹性Pasternak地基上的Bernoulli-Euler梁的回传射线矩阵,进而得到其频率方程。根据单一局部坐标系下的边界条件,推导出模态函数解析表达式,进一步根据正交归一化条件求解模态函数表达式中的未知参数。通过具体算例验证了回传射线矩阵法求解的正确性,并对不同边界条件下的自振频率、衰减系数及模态函数进行了分析。为黏弹性地基梁的振动特性研究提供理论基础。

变截面修正Timoshenko梁自振频率的回传射线矩阵法分析

考虑剪切变形对转动惯量的影响,对经典Timoshenko梁理论进行修正,并基于回传射线矩阵法,将横截面线性变化的圆台均匀分为多段分段等截面等效梁,推导并求解三种经典边界(两端简支、两端固支、一端固支一端自由)条件下变截面修正Timoshenko梁的自振频率,进一步分析分段数目和梁长度的变化对变截面修正Timoshenko梁自振频率的影响;将计算结果与相同边界条件下经典Timoshenko梁的相应结果进行对比。研究表明:回传射线矩阵法用于分析变截面梁的自振频率时具有良好的计算精度和收敛性;相同边界条件下修正Timoshenko梁的自振频率小于经典Timoshenko梁,且梁越短粗,修正造成的影响(剪切变形对转动惯量的影响)就越大。