Response of CH_4 emission of paddy fields to land management practices at a microcosmic cultivation scale in China

The terrestrial ecosystem may be either a source or a sink of CH_4 in rice paddies, depending, to a great extent, on the change of ecosystem types and land use patterns. CH_4 emission fluxes from paddy fields under 4 cultivation patterns (conventional plain culture of rice(T1), no-tillage and ridge culture of rice(T2), no-tillage and ridge culture of rice and wheat (T3), and rice-wheat rotation(T4)) were measured with the closed chamber technique in 1996 and 1998 in Chongqing, China. The results showed that differences existed in CH_4 emission from paddy fields under these land management practices. In 1996 and 1998, CH_4 emission was 71 48% and 78 82%(T2), 65 93% and 57 18%(T3), and 61 53% and 34 22%(T4) of that in T1 during the rice growing season. During the non-rice growing season, CH_4 emission from rice fields was 76 23% in T2 and 38 69% in T1 The accumulated annual CH_4 emission in T2, T3 and T4 in 1996 decreased by 33 53%, 63 30% and 65 73%, respectively, as compared with that in T1 In 1998, the accumulated annual CH_4 emission in T1, T2, T3 and T4 was 116 96 g/m^2, 68 44 g/m^2, 19 70 g/m^2 and 11 80 g/m^2, respectively. Changes in soil physical and chemical properties, in thermal and moisture conditions in the soil and in rice plant growth induced by different land use patterns were the dominant causes for the difference in CH_4 emission observed. The relative contribution of various influencing factors to CH_4 emission from paddy fields differed significantly under different land use patterns. However, the general trend was that chlorophyll content in rice leaves, air temperature and temperature at the 5 cm soil layer play a major role in CH_4 emission from paddy fields and the effects of illumination, relative humidity and water layer depth in the paddy field and CH_4 concentration in the crop canopy were relatively non-significant. Such conservative land use patterns as no-tillage and ridge culture of rice with or without rotation with wheat are thought to be beneficial to reducing CH_4 emission from paddy fields and are, therefore, recommended as a significant solution to the problems of global(climatic) change.

Mechanical characteristics and microcosmic mechanisms of granite under temperature loads

The relationships between mechanical characteristics of rock and microcosmic mechanism at high temperatures were investigated by MTS815, as well as the stress-strain behavior of granite under the action of temperatures ranging from room temperature to 1200 ℃. Based on a micropore structure analyzer and SEM, the changes in rock porosity and micro structural morphology of sample fractures and brittle-plastic characteristics under high temperatures were analyzed. The results are as follows： 1） Mechanical characteristics do not show obvious variations before 800 ℃; strength decreases suddenly after 800 ℃ and bearing capacity is almost lost at 1200 ℃. 2） Rock porosity increases with rising temperatures; the threshold temperature is about 800 ℃; at this temperature its effect is basically uniform with strength decreasing rapidly. 3） The failure type of granite is a brittle tensile fracture at temperatures below 800 ℃ which transforms into plasticity at temperatures higher than 800 ℃ and crystal formation takes place at this time. Chemical reactions take place at 1200 ℃. Failure of granite under high temperature is a common result of thermal stress as indicated by an increase in the thermal expansion coefficient, transformation to crystal formation of minerals and structural chemical reactions.

Analyses of concrete microcosmic structure in multi-media environment

The structure of concrete generally serves in multi-media environments; various environments act differently on concrete. The compound action of some severe environments will threaten the duration of concrete and decrease the service life of a concrete structure if improperly handled. In this paper the microstructure of concrete is observed by using Scanned Electric Microscope (SEM) through contrasting experiments in media of acid, alkali and salt with that of freezing-thawing in the same medium environment. This study is to supply a certain basis for changing traditional thinking of mechanical design and to combine construction reliability design with durability of concrete design.

Clinical study on microscopic syndrome differentiation and traditional Chinese medicine treatment for liver stomach disharmony in chronic gastritis

BACKGROUND Chronic gastritis(CG)is a common gastrointestinal disorder characterized by inflammation of the stomach lining.Liver-stomach disharmony(LSD)syndrome is believed to contribute to CG symptoms.AIM To evaluate the efficacy and safety of microcosmic syndrome differentiation and Chinese herbal medicine(CHM)treatment in patients with CG and LSD syndrome.METHODS Sixty-four patients with CG and LSD syndrome were randomly divided into two groups:The treatment group received CHM based on microcosmic syndrome differentiation and the control group received conventional Western medicine.The treatment course lasted 12 wk.The primary outcome was improvement in dyspeptic symptoms,measured using the Nepean Dyspepsia Index.The secondary outcomes included the improvement rate of endoscopic findings,histopathological findings,and microcosmic syndrome scores and the incidence of adverse events.RESULTS After 12 wk of treatment,the treatment group showed significantly greater improvement in dyspeptic symptoms than the control group(93.75%vs 65.63%,P<0.01).The treatment group also showed a significantly higher improvement rate in endoscopic findings than the control group(81.25%vs 53.13%,P<0.05).The improvement rates of histopathological findings and microcosmic syndrome scores were not significantly different between the two groups(P>0.05).No serious adverse events were observed in either group.CONCLUSION Microcosmic syndrome differentiation and CHM treatment can effectively improve dyspeptic symptoms and endoscopic findings in patients with CG and LSD syndrome and have a good safety profile.Further studies with larger sample sizes and longer follow-up periods are required to confirm the long-term efficacy and mechanism of action of this treatment.

A microcosmic discrete occupant evacuation model based on individual characteristics

The research of occupant evacuation in an emergency is of great benefit to building design and evacuation guidance. In this paper a microcosmic discrete evacuation model based on Cellular Automata (CA) is presented, in which the occupants?individual characteristics are considered. Thus, our model has given a description of evacuation route choice with influencing factors, including: individual knowledge of the building, individual realization of the emergency development, and the attractive and repulsive force between occupants. This model differs somewhat from other models in the attention to the associative and separate effect of influencing factors, based on occupants behaviors. In addition, the model could reveal the phenomenon of escape in fire, as those simulations involving a fire condition have shown.

Raman spectroscopic characteristics of microcosmic and photosensitive damage on space structure of liposomes sensitized by hypocrellin and its derivatives

Raman spectroscopic characteristics of microcosmic and photosensitive damage on space structure of DPPC liposomes sensitized by hypocrellin and its derivatives are obvious. The trans conformation decreased and the gauche conformation increased. The longitudinal order_parameter in chains and the lateral order_parameter between chains decreased in different degrees. The lateral packing became loose. Photodamage on the liposomes sensitized by 5 Br hypocrellin B was stronger than that by hypocrellins A and B.

THE MOLECULAR MECHANISM OF PHOTOPORPHYRIN (YHPD)'S PHOTOSENSITIZATION——LASER RAMAN SPECTROSCOPIC STUDY OF MICROCOSMIC AND PHOTOSENSITIVE DAMAGE OF YHPD TO PROTEIN

Laser Raman spectroscopy was used to investigate the microcosmic and photosensitive damage of YHPD to lysozyme, of which the three-dimensional structure has been elucidated. The experimental results shown by various damages of the main-chain and side-chain of lysozyme are as follows: (ⅰ) Phe and Cys are also damaged by photosensitization of YHPD, except for Trp, Tyr, Met, 1/2Cys and His; (ⅱ) the order of the photosensitized sensitivity of various groups of these amino acids have been described; (ⅲ) Trp and Tyr buried in the three-dimensional structure of the protein are damaged very greatly, and (ⅳ) the main-chain conformation of the protein has changed considerably, such as a decrease in orderly structure (α-helix, β-sheet and β-turn) and a simultaneous increase in random coil.

Effects of Using Softwood Pellet Biochar Prepared at Different Temperatures with Grass Chippings on Retention of Heavy Metals in Contaminated Soils

Heavy metals have been viewed as hazardous environmental pollutants, and anthropogenic activities due to their high toxicity and persistent nature in the environment. Anthropogenic activities such as artisanal mining, industrial activities, improper usage of fertilizers and pesticides, and indiscriminate open waste disposal bring about an increase in the presence of heavy metals in the environment. In the Keffi Metropolis, different elements lead to land contamination which debilitates soil quality, plant survival, human well-being, and the environment as a result of extensive dispersion or quantity of heavy metals in the soil and water. In recent years, biochar has emerged as a promising soil amendment for mitigating heavy metal pollution due to its unique physicochemical properties. This paper provides the effects of softwood pellet biochar on the retention of heavy metals in contaminated soils. A microcosm experiment was carried out to investigate the effects of biochar on the retention of heavy metals in contaminated soils. This research aimed to give an overview of the effects of softwood biochar at different temperatures (550˚C and 700˚C) on the retention of heavy metals and metalloids released from the soil during water inundation. The results show that the addition of organic matter (grass chippings) minimizes heavy metal mobilization. Also, biochar at high temperatures is more effective than those at low temperatures. The expected outcome of the research analysis includes providing insights into the role of biochar in retaining heavy metal contamination and further understanding the use of biochar as a sorbent for the management of contaminated soil.

The Research for Surface Properties of Steel Slag Powder and High-Temperature Rheological Properties of Asphalt Mortar

In order to evaluate the feasibility of steel slag powder as filler,the coating properties of steel slag and limestone aggregate were compared by water boiling test,the micro morphology difierences between steel slag powder and mineral powder(limestone powder)were compared by scanning electron microscope(SEM),and the high-temperature rheological properties of asphalt mortar with difierent ratio of filler quality to asphalt quality(F/A)and difierent substitution rates of mineral powder(S/F)were studied by dynamic shear rheological test.The results show that the surface microstructure of steel slag powder is more abundant than that of mineral powder,and the adhesion of steel slag to asphalt is better than that of limestone.At the same temperature,the lower the ratio of S/F is,the greater the rutting factor and complex modulus will be.In addition,the complex modulus and rutting factor of the asphalt mortar increase with the increase of F/A,and the filler type and F/A have a negligible efiect on the phase angle.

Evaluation of the Efficacy of Albizia zygia Extracts on Bacterial Inhibition in Aquatic Microcosm

The objective of this study is the phytochemical analysis and the determination of the antibacterial activity of aqueous and hydro-ethanolic extracts obtained from the leaves and bark of the trunk of Albizia zygia, against Escherichia coli and Salmonella typhi bacteria in aquatic microcosms. Phytochemical screening was performed as described by Pareck. The results obtained show that the hydro-ethanolic and aqueous extracts of Albizia zygia trunk bark recorded higher extraction yields (26.71% and 33.2% respectively) compared to the aqueous and hydro-ethanolic extracts of leaves of the same plant. Secondary metabolites with antibacterial activities such as anthraquinones, anthocyanins, flavonoids, polyphenols, tannins and saponins were found in both types of extracts. Flavonoids and anthocyanins were relatively more abundant than the other chemical constituents. The highest cellular inhibition rate of Escherichia coli was 99.88%, obtained after 9 hours of exposure in the hydro-ethanolic extract solution of trunk bark at the concentration 1.5 g/L. The Salmonella typhi rate was 99.95% after 9 hours of exposure of bacterial cells to the hydro-ethanol extract of the bark of the trunk at the concentration 1.5 g/L. This rate increased proportionally with the bacterial-extract contact time. The temperature of the medium did not significantly influence bacterial inhibition (P > 0.05). The obtained results justify the use of the plant Albizia zygia in the reduction of the flow of bacterio-pollutants contained in water intended for consumption.

The Effect of Temperature on Irreducible Water Saturation of Water-wet Cores

The conventional measurement of a relative permeability curve (RPC) is usually conducted at room temperature, which is much lower than the reservoir temperature. Previous research work on high temperature relative permeability mainly take oil-wetted cores as objective. In this paper, laboratory test and measurement are conducted using water-wet cores from the Lunnan Oilfield. Since irreducible water saturation (Swi) is a critical factor that affects and controls the relative permeability curve, special tests are conducted to measure Swi at different temperatures for water-wet cores in the course of the experiment of relative permeability. The experimental results indicate that for the water-wet cores Swi decreased with the increasing temperature from ambient to 105℃,and the relative permeability curve shifted in a low water saturation direction, i.e. moved toward the left, while it moved toward the right for oil wetness reservoirs. Seen from both macroscopic and microcosmic view, the reasons and mechanisms of relative permeability change with temperature are discussed, and factors including core wetness, viscosity force, capillary forces, contact angle, interfacial tension change are considered.

Microscopic sand production simulation and visual sanding pattern description in weakly consolidated sandstone reservoirs

To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.

Microscopic and Dynamic Rheological Characteristics of Crumb Rubber Modified Asphalt

A test for crumb rubber modified asphalt containing 20% crumb rubber particles（30 mesh） was performed using a scanning electron microscope（SEM）.The experimental results indicate that the crumb rubber particles are evenly distributed in the asphalt.Shear rate sweep and shear-temperature sweep tests on the crumb rubber modified asphalt at-20-80 ℃ using a dynamic shear rheology（DSR） instrument,were carried out.The tests show that the complex modulus decreases with increasing temperature;at equivalent temperature,higher load frequencies lead to a larger complex modulus,and this value increasingly decreases as the temperature increases;the phase angle increases with temperature and decreases as the load frequency increases.It can be concluded that the rutting resistance limiting temperature of crumb rubber modified asphalt is 78 ℃,and the anti-fatigue limiting temperature is 16 ℃,which shows that the asphalt has preferable rutting resistance characteristics at high temperature,as well as anti-fatigue characteristics.In addition,the complex modulus master curve at different temperatures was plotted according to the time temperature equivalence principle,which allows the study of the dynamic state behavior of crumb rubber modified asphalt at a wide range of load frequency.

Effect of the lenticles on moisture migration in capillary zone of tailings dam

Small-particle interlayers(lenticles)show some characteristic hydraulic properties and can affect the movement of unsaturated water.In this study,we developed a novel online capillary-water-absorption monitoring device and conducted three groups of comparison tests to simulate lenticle positions and thicknesses with respect to the capillary rise.The results show that the characteristic wetting front exhibits a fast rise in the early stage,a slow rise in the middle stage,and stability in the later stage.The motion of the capillary water in the lenticle is mainly transversal,with the upward curve being"flat,"and the longer is"flat,"the longer is the time needed for the water to move.The interlayer can form a capillary stagnation zone with moisture content close to saturation.The high interlayer may form a discontinuous corrugated capillary zone.Thus,when the wetting front reaches the"coarse-grain(lower)-fine-grain(upper)"interface,the"anti-capillary barrier effect"results in more moisture in the upper layer.Thus,when the wetting front of the capillary water reaches the"fine-grain(upper)-coarse-grain(lower)"interface,the"capillary barrier effect"causes the moisture content of the upper tailings to decreases sharply because of the horizontal movement of the water in the fine medium.It is clear that the presence of lenticles can retard the rise of capillary water by storing water.

Synthesis of super high molecular weight copolymer of AM/NaA/AMPS by oxidation–reduction and controlled radical polymerization

Super high molecular weight copolymers of AM/NaA/AMPS were prepared by oxidation–reduction[OR-P(AM/NaA/AMPS)]and controlled radical polymerization[CR-P(AM/NaA/AMPS)].The resulting copolymers were fully characterized,and the reaction conditions for their preparation were optimized.OR-P(AM/NaA/AMPS),CR-P(AM/NaA/AMPS),and conventional partially hydrolyzed polyacrylamide(HPAM)in brine solution were comprehensively characterized by thermogravimetric analysis,scanning electron microscopy,atomic force microscopy,and dynamic light scattering.ORP(AM/NaA/AMPS)and CR-P(AM/NaA/AMPS)containing AMPS monomer showed better salt resistance,temperature tolerance,and viscosification property than the conventional HPAM polymer,making them more promising for enhanced oil recovery.Through comprehensive comparison and analysis,it was found that OR-P(AM/NaA/AMPS)was more conducive for high-temperature condition due to the existence of xanthone in OR-P(AM/NaA/AMPS).On the other hand,CR-P(AM/NaA/AMPS)was more suitable for high-mineral atmosphere,which could be attributed to its higher intrinsic viscosity.

Microscopic properties and sealing performance of new gas drainage drilling sealing material

The geological condition of Chinese coal mines are complex and high gassy,which account for ffty percent to seventy percent.Because of the abundant pores and cracks around the drainage drilling hole,the gas concentration attenuates rapidly,and the effective gas drainage period is short.The traditional sealing materials of yellow mud and cement-sand grout will readily shrink after the drilling hole is sealed,the sealing length is short and the sealing quality is not satisfactory.Currently widely used polyurethane material will shrink when it comes into contact with water,and the price is also very high.In this study,taking cement as a base material,a novel composite sealing material mixed by expansion admixture,additive,and fbrin and coupling agent was developed and the sealing performance and expansion property of the material were also studied and analyzed.The FEI Quanta TM 250 environmental scanning electron microscope was used to investigate the microstructure of material.The results revealed that the new composite sealing material had a desirable expansion performance and a defnite fluidity convenient for grouting.The solidifed material,combining closely with the drilling wall,possessed an adequate strength and was not easy to shrink.Compared to the conventional polyurethane,the gas drainage concentration by drilling sealing exceeded 40 percent,and the sealing capacity improves5 times,the sealing effect increases signifcantly.

EXPERIMENTAL STUDY ON TRIBOLOGICAL PROPERTIES OF FULLERENE COPOLYMER NANOBALL

A novel fullerene-styrene-maleic anhydride copolymer is reported. TEM analyses shows it is water- soluble nanoball of average diameter of about 83 nm. The tribological behavior is evaluated by foul-ball machine. It was found that addition of fullerene copolymer to base stock (2%triethanolamine aqueous solution)resulted in a raise in load-carrying ability(F value)from 130 N to maximum 480 N, and a reduction in coefficient of friction from 0.235 to minimum 0. 063. SEM analyses indicates that the wear scare obtained with fullerene copolymer exhibited mild scratches, while sharp grooving and serious pull-out phenomnon were observed in the presence of base stock without additive .The improvements in friction, wear and load-carrying capacity are probably due to the presence of fullerene copolymer nanoballs, which may act as molecule ball bearings, which in turn lead to elastic rolling lubrication.

Rheological properties and microscopic mechanism of waste cooking oil activated waste crumb rubber modified asphalt

In this paper,the surface activated crumb rubber with waste cooking oil(WCO)was studied to improve the performance of crumb rubber modified asphalt.The activated waste crumb rubber modified asphalt(OCRMA)with different amount of crumb rubber was prepared to study the microscopic appearance of OCRMA by scanning electron microscope and fluorescence microscope and analyze the surface performance.The rheological properties and microscopic mechanism of OCRMA were characterized by dynamic shear rheological test,multiple stress creep recovery(MSCR)test,BBR test and infrared spectroscopy.The results show that the dissolution degree of waste crumb rubber is improved after WCO activation,and the compatibility with asphalt components is enhanced,and the stable cross-linking structure is formed,which improves the asphalt performance.The several new absorption peaks,which were obvious,were all caused by the composition of WCO,that is,there was no significant chemical change during the interaction between the activated crumb rubber and base asphalt.Compared with the common waste crumb rubber modified asphalt(CRMA),activation with WCO can significantly reduce the viscosity of CRMA,decrease the difference of segregation softening point by 27%,and enhance the low temperature performance by 30%.The aging degree is greatly reduced,and the anti-aging performance of OCRMA is increased by about 20%with the same dosage.The high temperature performance,though higher than that of base asphalt,decreases to some extent.After comprehensive analysis,the optimal dosage of crumb rubber for OCRMA is 30%.

Effect of alternate magnetic field on LY12 structure properties after thermal plastic forming

The powerful alternate magnetic field treatment is an effective not-heat treatment, which improves the coriaceous performance of the material. In order to reveal the effect rule of the powerful alternate magnetic field on the structure capability after thermal plastic forming, the experimental methods were adopted to compare the microcosmic structure of the LY12 aluminium alloy test pieces before and after the powerful alternate magnetic field treatment. The mechanism of the structure refining was analyzed theoretically. According to the effect rule of the alternate magnetic field on critical grain growth work and the magnetic vibration-constriction mechanism, the structure dynamics factors were analyzed. The results show that, after a certain powerful alternate magnetic field treatment, the mechanical capability of the LY12 aluminium alloy after thermal plastic forming can be reinforced, the structure intertwist deriving from the thermal plastic forming becomes even and the branch crystal is also smashed, consequently refines the structure. The powerful alternate magnetic field treatment can be regarded as an effective method to improve metal structure performance after heat plastic forming.

Mechanical properties and microscopic failure process of exemplary argillaceous interlayer from east China

The landslide disaster caused by the argillaceous interlayer not only destroys buildings,cultivated land,and roads but also seriously endangers human life and safety.This study concerns the mineral composition of selected argillaceous interlayer and their strength characteristics.To study the mineral composition of argillaceous interlayers,8 kinds of samples in the southern Jiangsu region of China were analyzed utilizing X-ray diffraction(XRD).The repeated direct shear strength tests(RDST)were carried out on the undisturbed specimens of the argillaceous interlayer.The results show that the argillaceous interlayer with high content of kaolinite shows ductile failure mode,which means that there is no obvious residual strength in the shear process.The arrangement of mineral particles on the shear surface of the specimens after different shear displacements was observed under the scanning electron microscope(SEM).It was observed that mineral particles on the shear surface showed a more directional arrangement with the increase of shear displacement.Furthermore,the influence of shear direction on the argillaceous interlayer with completely oriented mineral particles was studied through numerical experiments with four shear strength mechanisms proposition proposed.The influence of the mineral arrangement on the action occasion and magnitude of dilatancy component of shear strength is clarified in the shear mechanism.