Size dependent free vibration analysis of functionally graded piezoelectric micro/nano shell based on modified couple stress theory with considering thickness stretching effect

Higher-order shear and normal deformation theory is used in this paper to account thickness stretching effect for free vibration analysis of the cylindrical micro/nano shell subjected to an applied voltage and uniform temperature rising.Size dependency is included in governing equations based on the modified couple stress theory.Hamilton’s principle is used to derive governing equations of the cylindrical micro/nano shell.Solution procedure is developed using Navier technique for simply-supported boundary conditions.The numerical results are presented to investigate the effect of significant parameters such as some dimensionless geometric parameters,material properties,applied voltages and temperature rising on the free vibration responses.

A Size-Dependent Functionally Graded Higher Order Plate Analysis Based on Modified Couple Stress Theory and Moving Kriging Meshfree Method

A size-dependent computational approach for bending,free vibration and buckling analyses of isotropic and sandwich functionally graded(FG)microplates is in this study presented.We consider both shear deformation and small scale effects through the generalized higher order shear deformation theory and modified couple stress theory(MCST).The present model only retains a single material length scale parameter for capturing properly size effects.A rule of mixture is used to model material properties varying through the thickness of plates.The principle of virtual work is used to derive the discrete system equations which are approximated by moving Kriging interpolation(MKI)meshfree method.Numerical examples consider the inclusions of geometrical parameters,volume fraction,boundary conditions and material length scale parameter.Reliability and effectiveness of the present method are confirmed through numerical results.

Sensitivity analysis of pull-in voltage for RF MEMS switch based on modified couple stress theory

An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency （RF） micro electro-mechanical system （MEMS） switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.

Bending and Buckling of Circular Sinusoidal Shear Deformation Microplates with Modified Couple Stress Theory

The modified couple stress theory(MCST)is applied to analyze axisymmetric bending and buckling behaviors of circular microplates with sinusoidal shear deformation theory.The differential governing equations and boundary conditions are derived through the principle of minimum total potential energy,and expressed in nominal form with the introduced nominal variables.With the application of generalized differential quadrature method(GDQM),both the differential governing equations and boundary conditions are expressed in discrete form,and a set of linear equations are obtained.The bending deflection can be obtained through solving the linear equations,while buckling loads can be determined through solving general eigenvalue problems.The influence of material length scale parameter and plate geometrical dimensions on the bending deflection and buckling loads of circular microplates is investigated numerically for different boundary conditions.

Size-dependent thermoelastic initially stressed micro-beam due to a varying temperature in the light of the modified couple stress theory

The bending of the Euler-Bernoulli micro-beam has been extensively modeled based on the modified couple stress(MCS)theory.Although many models have been incorporated into the literature,there is still room for introducing an improved model in this context.In this work,we investigate the thermoelastic vibration of a micro-beam exposed to a varying temperature due to the application of the initial stress employing the MCS theory and generalized thermoelasticity.The MCS theory is used to investigate the material length scale effects.Using the Laplace transform,the temperature,deflection,displacement,flexure moment,and stress field variables of the micro-beam are derived.The effects of the temperature pulse and couple stress on the field distributions of the micro-beam are obtained numerically and graphically introduced.The numerical results indicate that the temperature pulse and couple stress have a significant effect on all field variables.

Vibration Behavior of a Sandwich Porous Elliptical Micro-Shell with a Magneto-Rheological Core Based on the Modified Couple Stress Theory

Recently,the use of porous materials has grown widely in many structures,such as beams,plates,and shells.The characteristics of porous materials change in the thickness direction by different functions.This study has investigated the free vibration analysis of a sandwich porous elliptical micro-shell with a magneto-rheological fluid(MRF)core for the first time.Initially,we examined the displacement of the middle layer’s macro-and micro-components,using Love’s shell theory.Next,we used the modified couple stress theory(MCST)to obtain the strain and symmetrical curvature tensors for the three layers.The Hamilton’s principle was implemented to derive the equations of motion.We also used the Galerkin’s method to solve the equations of motion,resulting in a system of equations in the form of a linear eigenvalue problem.By solving the governing equations,we obtained the various natural frequencies and loss factors of the elliptical micro-shell,and compared them with the results in earlier studies.Lastly,we investigated the effects of thickness,porosity distribution pattern,aspect ratio,length scale parameter,and magnetic field intensity on the natural frequency and loss factor of the micro-shell.The data accuracy was validated by comparing them with those of reputable previous articles.

VIBRATION ANALYSIS OF MICROSCALE PLATES BASED ON MODIFIED COUPLE STRESS THEORY

A non-classical Kirchhoff plate model is developed for the dynamic analysis of microscale plates based on the modified couple stress theory in which an internal material length scale parameter is included. Unlike the classical Kirchhoff plate model, the newly developed model can capture the size effect of microscale plates. Two boundary value problems of rectangular micro- plates are solved and the size effect on the lowest two natural frequencies is investigated. It is shown that the natural frequencies of the microscale plates predicted by the current model are size-dependent when the plate thickness is comparable to the material length scale parameter.

STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.

A size-dependent composite laminated skew plate model based on a new modified couple stress theory

In this study, a size-dependent composite laminated skew Mindlin plate model is proposed based on a new modified couple stress theory. This plate model can be viewed as a simplified couple stress theory in engineering mechanics. Governing equations and related boundary conditions are derived based on the principle of minimum potential energy. The Rayleigh–Ritz method is employed to obtain the numerical solutions of the center deflections of simply supported plates with different ply orientations. Numerical results show that the normalized center deflections obtained by the proposed model are always smaller than those obtained by the classical one, i.e. the present model can capture the scale effects of microstructures. Moreover, a phenomenon reveals that the ply orientation would make a significant influence on the magnitude of scale effects of composite laminated plates at micro scale. Additionally, the present model of thick skew plate can be degenerated to the model of Kirchhoff plate based on the modified couple stress theory by adopting the assumptions in Bernoulli–Euler beam and material isotropy.

Application of Modified Couple Stress Theory and Homotopy Perturbation Method in Investigation of Electromechanical Behaviors of Carbon Nanotubes

The paper presents the size-dependant behaviors of the carbon nanotubes under electrostatic actuation using the modified couple stress theory and homotopy perturbation method.Due to the less accuracy of the classical elasticity theorems,the modified couple stress theory is applied in order to capture the size-dependant properties of the carbon nanotubes.Both of the static and dynamic behaviors under static DC and step DC voltages are discussed.The effects of various dimensions and boundary conditions on the deflection and pull-in voltages of the carbon nanotubes are to be investigated in detail via application of the homotopy perturbation method to solve the nonlinear governing equations semi-analytically.

Size-dependent effect on biaxial and shear nonlinear buckling analysis of nonlocal isotropic and orthotropic micro-plate based on surface stress and modified couple stress theories using differential quadrature method

The size-dependent effect on the biaxial and shear nonlinear buckling analysis of an isotropic and orthotropic micro-plate based on the surface stress, the modified couple stress theory （MCST）, and the nonlocal elasticity theories using the differential quadrature method （DQM） is presented. Main advantages of the MCST over the classical theory （CT） are the inclusion of the asymmetric couple stress tensor and the consideration of only one material length scale parameter. Based on the nonlinear von Karman assumption, the governing equations of equilibrium for the micro-classical plate consid- ering midplane displacements are derived based on the minimum principle of potential energy. Using the DQM, the biaxial and shear critical buckling loads of the micro-plate for various boundary conditions are obtained. Accuracy of the obtained results is validated by comparing the solutions with those reported in the literature. A parametric study is conducted to show the effects of the aspect ratio, the side-to-thickness ratio, Eringen＇s nonlocal parameter, the material length scale parameter, Young＇s modulus of the surface layer, the surface residual stress, the polymer matrix coefficients, and various boundary conditions on the dimensionless uniaxial, biaxial, and shear critical buckling loads. The results indicate that the critical buckling loads are strongly sensitive to Eringen＇s nonlocal parameter, the material length scale parameter, and the surface residual stress effects, while the effect of Young＇s modulus of the surface layer on the critical buckling load is negligible. Also, considering the size dependent effect causes the increase in the stiffness of the orthotropic micro-plate. The results show that the critical biaxial buckling load increases with an increase in G12/E2 and vice versa for E1/E2. It is shown that the nonlinear biaxial buckling ratio decreases as the aspect ratio increases and vice versa for the buckling amplitude. Because of the most lightweight micro-composite materials with high strength/weight and stiffness/weight ratios, it is anticipated that the results of the present work are useful in experimental characterization of the mechanical properties of micro-composite plates in the aircraft industry and other engineering applications.

Modified couple stress and thickness-stretching included formulation of a sandwich micro shell subjected to electro-magnetic load resting on elastic foundation

This paper studies electromagnetoelastic static investigation of a sandwich doubly curved microshell subjected to multi-field loading based on a new thickness stretching included refined higher order shear/normal deformable model.Modified-couple-stress-theory(MCST)is used for accounting small-scaledependency.The numerical results are derived using an analytical method.The effect of small scale parameter in micro scale,initial electric and magnetic potentials and foundation parameters is studied on the electromagnetoelastic bending results.It is confirmed an enhancing in stiffness of small scale shell with an increase in micro length scale parameter.

AHermitian C^(2) Differential Reproducing Kernel Interpolation Meshless Method for the 3D Microstructure-Dependent Static Flexural Analysis of Simply Supported and Functionally Graded Microplates

This work develops a Hermitian C^(2) differential reproducing kernel interpolation meshless(DRKIM)method within the consistent couple stress theory(CCST)framework to study the three-dimensional(3D)microstructuredependent static flexural behavior of a functionally graded(FG)microplate subjected to mechanical loads and placed under full simple supports.In the formulation,we select the transverse stress and displacement components and their first-and second-order derivatives as primary variables.Then,we set up the differential reproducing conditions(DRCs)to obtain the shape functions of the Hermitian C^(2) differential reproducing kernel(DRK)interpolant’s derivatives without using direct differentiation.The interpolant’s shape function is combined with a primitive function that possesses Kronecker delta properties and an enrichment function that constituents DRCs.As a result,the primary variables and their first-and second-order derivatives satisfy the nodal interpolation properties.Subsequently,incorporating ourHermitianC^(2)DRKinterpolant intothe strong formof the3DCCST,we develop a DRKIM method to analyze the FG microplate’s 3D microstructure-dependent static flexural behavior.The Hermitian C^(2) DRKIM method is confirmed to be accurate and fast in its convergence rate by comparing the solutions it produces with the relevant 3D solutions available in the literature.Finally,the impact of essential factors on the transverse stresses,in-plane stresses,displacements,and couple stresses that are induced in the loaded microplate is examined.These factors include the length-to-thickness ratio,the material length-scale parameter,and the inhomogeneity index,which appear to be significant.

Size-dependent thermomechanical vibration characteristics of rotating pre-twisted functionally graded shear deformable microbeams

A three-dimensional(3D)thermomechanical vibration model is developed for rotating pre-twisted functionally graded(FG)microbeams according to the refined shear deformation theory(RSDT)and the modified couple stress theory(MCST).The material properties are assumed to follow a power-law distribution along the chordwise direction.The model introduces one axial stretching variable and four transverse deflection variables including two pure bending components and two pure shear ones.The complex modal analysis and assumed mode methods are used to solve the governing equations of motion under different boundary conditions(BCs).Several examples are presented to verify the effectiveness of the developed model.By coupling the slenderness ratio,gradient index,rotation speed,and size effect with the pre-twisted angle,the effects of these factors on the thermomechanical vibration of the microbeam with different BCs are investigated.It is found that with the increase in the pre-twisted angle,the critical slenderness ratio and gradient index corresponding to the thermal instability of the microbeam increase,while the critical material length scale parameter(MLSP)and rotation speed decrease.The sensitivity of the fundamental frequency to temperature increases with the increasing slenderness ratio and gradient index,and decreases with the other increasing parameters.Moreover,the size effect can suppress the dynamic stiffening effect and enhance the Coriolis effect.Finally,the mode transition is quantitatively demonstrated by a modal assurance criterion(MAC).

Dynamic modeling of preloaded size-dependent nano-crystalline nano-structures

The vibration behavior of size-dependent nano-crystalline nano-beams is investigated based on nonlocal, couple stress and surface elasticity theories. A nano- crystalline nano-beam is composed of three phases which are nano-grains, nano-voids, and interface. Nano-voids or porosities inside the material have a stiffness-softening impact on the nano-beam. A Eringen＇s nonlocal elasticity theory is applied in the analysis of nano-crystalline nano-beams for the first time. Residual surface stresses which are usually neglected in modeling nano-crystalline nano-beams are incorporated into nonlocal elasticity to better understand the physics of the problem. Also, a modified couple stress theory is used to capture rigid rotations of grains. Applying a differential transform method （DTM） satisfying various boundary conditions, the governing equations obtained from the Hamilton＇s principle are solved. Reliability of the proposed approach is verified by comparing the obtained results with those provided in the literature. The effects of the nonlocal parameter, surface effect, couple stress, grain size, porosities, and interface thickness on the vibration characteristics of nano-crystalline nano-beams are explored.

Modal interactions in primary and subharmonic resonant dynamics of imperfect microplates with geometric nonlinearities

This paper analyses the modal interactions in the nonlinear, size-dependent dynamics of geometrically imperfect microplates. Based on the modified couple stress theory,the equations of motion for the in-plane and out-of-plane motions are obtained employing the von Kármán plate theory as well as Kirchhoff＇s hypotheses by means of the Lagrange equations. The equations of motions are solved using the pseudo-arclength continuation technique and direct timeintegration method. The system parameters are tuned to the values associated with modal interactions, and then nonlinear resonant responses and energy transfer are analysed.Nonlinear motion characteristics are shown in the form of frequency-response and force-response curves, time histories, phase-plane portraits, and fast Fourier transforms.

Analytic solution for size-dependent behaviors of micro-beam under forced vibration

This paper focuses on the size-dependently mechanical behaviors of a micro-beam under forced vibration.Governing equations of a micro-beam under forced vibration are established by using the modified couple stress theory,Bernoulli-Euler beam theory and D’Alembert’s principle together.A simply supported micro-beam under forced vibration is solved according to the established governing equations and the method of separation of variables.The dimensionless deflection,amplitude mode and period mode are defined to investigate the size-dependently mechanical behaviors of a micro-beam under forced vibration.Results show that the performance of a micro-beams under forced vibration is distinctly size-dependent when the ratio of micro-beam height to material length-scale parameter is small enough.Both frequency ratio and loading location are the important factors that determine the sizedependent performance of a micro-beams under forced vibration.

Forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by CNTs based on MCST with temperature-variable material properties

In this study, free and forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by carbon nanotubes （CNTs） under magnetic field based on modify couple stress theory （MCST） with temperature-variable material propertiesis presented. Also, the boundary conditions at two ends of nano-composite rotating pressurized microbeam reinforced by CNTs are considered as simply supported. The governing equations are obtained based on the Hamilton＇s principle and then computed these equations by using Navier＇s solution. The magnetic field is inserted in the thickness direction of the nano-composite microbeam. The effects of various parameters such as angular velocity, temperature changes, and pressure between of the inside and outside, the magnetic field, material length scale parameter, and volume fraction of nanocomposite microbeam on the natural frequency and response systemare studied. The results show that with increasing volume fraction of nano-composite microbeam, thickness, material length scale parameter, and magnetic fields, the natural frequency increases. The results of this research can be used for optimization of micro-structures and manufacturing sensors, displacement fluid, and drug delivery.