Attitude maneuver of liquid-filled spacecraft with an appendage as a cantilever beam by momentum wheel is studied. The dynamic equations are derived by conserva- tion of angular momentum and force equilibrium principl...Attitude maneuver of liquid-filled spacecraft with an appendage as a cantilever beam by momentum wheel is studied. The dynamic equations are derived by conserva- tion of angular momentum and force equilibrium principle. A feedback control strategy of the momentum wheel is ap- plied for the attitude maneuver. The residual nutation of the spacecraft in maneuver process changes with some chosen parameters, such as steady state time, locations of the liq- uid container and the appendage, and appendage parame- ters. The results indicate that locations in the second and fourth quadrants of the body-fixed coordinate system and the second quadrant of the wall of the main body are better choices for.placing the liquid containers and the appendage than other locations if they can be placed randomly. Higher density and thicker cross section are better for lowering the residual nutation if they can be changed. Light appendage can be modeled as a rigid body, which results in a larger residual nutation than a flexible model though. The resid- ual nutation decreases with increasing absolute value of the initial sloshing angular height.展开更多
The integrated power and attitude control for a bias momentum attitudecontrol system is investigated. A pair of counter-spinning wheels is used to provide the biasangular momentum and store/ discharge energy for power...The integrated power and attitude control for a bias momentum attitudecontrol system is investigated. A pair of counter-spinning wheels is used to provide the biasangular momentum and store/ discharge energy for power requirement of the devices on the spacecraft.The roll/yaw motion is controlled by pitch magnetic dipole moment. The torque-based control law ofthe wheels is designed, so that the desired pitch control torque is provided and the operation ofcharging/discharging energy is carried out based on the given power. System singularity in thecontrol law of wheels is fully avoided by keeping the wheels counter-spinning. A power managementscheme using kinetic energy feedback is proposed to keep energy balance, which can avoid wheelsaturation caused by superfluous energy. The minimum moment of inertia of the wheels is limited bythe maximum bias angular momentum and the minimum energy, such constrains are analyzed incombination with the geometrical method. Numerical simulation results are presented to demonstratethe effectiveness of the control scheme.展开更多
The three-axis active attitude control method with a momentum wheel and magnetic coils for a pico-satellite is considered. The designed satellite is a 2.5 kg class satellite stabilized to nadir pointing. The momentum ...The three-axis active attitude control method with a momentum wheel and magnetic coils for a pico-satellite is considered. The designed satellite is a 2.5 kg class satellite stabilized to nadir pointing. The momentum wheel performs a pitch-axis momentum bias, nominally spinning at a particular rate. Three magnetic coils are mounted perpendicularly along the body axis for precise attitude control through the switch control mechanism. Momentum wheel start up control, damping control and attitude acquisition control are considered. Simulation results show that the proposed combined control laws for the pico-satellite is reliable and has an appropriate accuracy under different separation conditions. The proposed strategy to start up the wheel after separation from the launch vehicle shows that its pitch momentum wheel can start up successfully to its nominal speed from rest, and the attitude convergence can be completed within several orbits, depending on separation conditions.展开更多
The microvibrations produced by momentum wheel assemblies（MWA） can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the...The microvibrations produced by momentum wheel assemblies（MWA） can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the microvibrations produced by MWA.We analyze the disturbance sources produced by mass imbalance,structural mode,bearing irregularity and nonlinear stiffness,and random noise;then,test a well-balanced MWA by a highly sensitive measurement system consisting of a Kistler table and an optical tabletop.The results show that the test system has a resolution of less than 0.003 N in the frequency range of 3-300 Hz.The dynamic imbalance of the MWA cannot excite the radial rocking mode,but there are dynamic amplifications when the poly-harmonic disturbances intersect with the structural modes.Especially at high rotational speed（〉3 000 rev/min）,the main disturbance sources of the MWA come from the bearing irregularity interacting with radial translation mode in the high frequency range.Thus,bearing noise deserves more attention for the well-balanced MWA,and alternative of high quality bearings are proposed to reduce the microvibrations.展开更多
动量轮是卫星姿态控制系统的关键部件,对卫星的可靠性及整体寿命有直接影响。针对卫星动量轮的剩余寿命预测问题,提出一种基于Copula函数的多退化量下的寿命预测方法。首先,分析了影响动量轮寿命的关键因素,选择润滑剂剩余量和电流作为...动量轮是卫星姿态控制系统的关键部件,对卫星的可靠性及整体寿命有直接影响。针对卫星动量轮的剩余寿命预测问题,提出一种基于Copula函数的多退化量下的寿命预测方法。首先,分析了影响动量轮寿命的关键因素,选择润滑剂剩余量和电流作为退化量;其次,分别对单个退化量进行退化建模,得到动量轮剩余寿命的边缘分布函数;然后,通过Copula函数族来描述多退化量之间的相关性,并对边缘分布进行融合,得到动量轮剩余寿命的联合分布函数;最后,提出基于赤池信息准则(Akaike information criterion,AIC)模型评价的Copula函数选择方法。展开更多
基金supported by the National Natural Science Foundation of China (11072030)
文摘Attitude maneuver of liquid-filled spacecraft with an appendage as a cantilever beam by momentum wheel is studied. The dynamic equations are derived by conserva- tion of angular momentum and force equilibrium principle. A feedback control strategy of the momentum wheel is ap- plied for the attitude maneuver. The residual nutation of the spacecraft in maneuver process changes with some chosen parameters, such as steady state time, locations of the liq- uid container and the appendage, and appendage parame- ters. The results indicate that locations in the second and fourth quadrants of the body-fixed coordinate system and the second quadrant of the wall of the main body are better choices for.placing the liquid containers and the appendage than other locations if they can be placed randomly. Higher density and thicker cross section are better for lowering the residual nutation if they can be changed. Light appendage can be modeled as a rigid body, which results in a larger residual nutation than a flexible model though. The resid- ual nutation decreases with increasing absolute value of the initial sloshing angular height.
文摘The integrated power and attitude control for a bias momentum attitudecontrol system is investigated. A pair of counter-spinning wheels is used to provide the biasangular momentum and store/ discharge energy for power requirement of the devices on the spacecraft.The roll/yaw motion is controlled by pitch magnetic dipole moment. The torque-based control law ofthe wheels is designed, so that the desired pitch control torque is provided and the operation ofcharging/discharging energy is carried out based on the given power. System singularity in thecontrol law of wheels is fully avoided by keeping the wheels counter-spinning. A power managementscheme using kinetic energy feedback is proposed to keep energy balance, which can avoid wheelsaturation caused by superfluous energy. The minimum moment of inertia of the wheels is limited bythe maximum bias angular momentum and the minimum energy, such constrains are analyzed incombination with the geometrical method. Numerical simulation results are presented to demonstratethe effectiveness of the control scheme.
基金supported by the Program for New Century Excellent Talents in University (No. NCET-06-0514), Chinathe Postdoctoral Science Foundation of China (Nos. 20081458 and 20080431306)
文摘The three-axis active attitude control method with a momentum wheel and magnetic coils for a pico-satellite is considered. The designed satellite is a 2.5 kg class satellite stabilized to nadir pointing. The momentum wheel performs a pitch-axis momentum bias, nominally spinning at a particular rate. Three magnetic coils are mounted perpendicularly along the body axis for precise attitude control through the switch control mechanism. Momentum wheel start up control, damping control and attitude acquisition control are considered. Simulation results show that the proposed combined control laws for the pico-satellite is reliable and has an appropriate accuracy under different separation conditions. The proposed strategy to start up the wheel after separation from the launch vehicle shows that its pitch momentum wheel can start up successfully to its nominal speed from rest, and the attitude convergence can be completed within several orbits, depending on separation conditions.
文摘The microvibrations produced by momentum wheel assemblies（MWA） can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the microvibrations produced by MWA.We analyze the disturbance sources produced by mass imbalance,structural mode,bearing irregularity and nonlinear stiffness,and random noise;then,test a well-balanced MWA by a highly sensitive measurement system consisting of a Kistler table and an optical tabletop.The results show that the test system has a resolution of less than 0.003 N in the frequency range of 3-300 Hz.The dynamic imbalance of the MWA cannot excite the radial rocking mode,but there are dynamic amplifications when the poly-harmonic disturbances intersect with the structural modes.Especially at high rotational speed（〉3 000 rev/min）,the main disturbance sources of the MWA come from the bearing irregularity interacting with radial translation mode in the high frequency range.Thus,bearing noise deserves more attention for the well-balanced MWA,and alternative of high quality bearings are proposed to reduce the microvibrations.
文摘动量轮是卫星姿态控制系统的关键部件,对卫星的可靠性及整体寿命有直接影响。针对卫星动量轮的剩余寿命预测问题,提出一种基于Copula函数的多退化量下的寿命预测方法。首先,分析了影响动量轮寿命的关键因素,选择润滑剂剩余量和电流作为退化量;其次,分别对单个退化量进行退化建模,得到动量轮剩余寿命的边缘分布函数;然后,通过Copula函数族来描述多退化量之间的相关性,并对边缘分布进行融合,得到动量轮剩余寿命的联合分布函数;最后,提出基于赤池信息准则(Akaike information criterion,AIC)模型评价的Copula函数选择方法。
