Preparation and characterization of a nanostructured lipid carrier for phenylethyl resorcinol

Phenylethyl resorcinol(PR)demonstrates inhibitory effects on multiple targets in the melanin synthesis pathway,resulting in a strong whitening effect.However,challenges such as limited solubility in water and susceptibility to oxidation and discoloration restrict its practical application in the cosmetics industry.In order to enhance stability and performance characteristics,a whitening nanostructured lipid carrier(NLC)was synthesized through high-pressure homogenization.This method entailed the incorporation of solid lipids,a liquid lipid,and a compound emulsifier,with deionized water fulfilling the roles of solid phase,liquid phase,and water phase,respectively.The NLC's particle size,Zeta potential,stability,encapsulation efficiency,and other parameters were assessed using techniques such as particle sizer,stability analyzer,and HPLC.The results showed that the NLC for phenylethyl resorcinol prepared by using the optimal formula(7.50%solid lipids,3.00%ethylhexyl palmitate,and 2.00%Tween 80 and soybean lecithin)has an encapsulation efficiency of 87.11%,a particle size of 157.2±0.70 nm,a kinetic instability of less than 1.2,and a greatly improved stability,thereby successfully solving the problems of unstable storage and poor solubility of phenylethyl resorcinol.

Toward high-efficiency perovskite solar cells with one-dimensional oriented nanostructured electron transport materials

The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.

Tribological properties of nanostructured Al_2O_3-40%TiO_2 multiphase ceramic particles reinforced Ni-based alloy composite coatings

The Ni-based alloy composite coatings reinforced by nanostructured Al2O3-40%TiO2 multiphase ceramic particles were prepared on the surface of 7005 aluminum alloy by plasma spray technology. The microstructure and tribological properties of the composite coatings were researched. The results show that the composite coatings mainly consist of γ-Ni, α-Al2O3, γ-Al2O3 and rutile-TiO2 etc, and exhibit lower friction coefficients and wear losses than the Ni-based alloy coatings at different loads and speeds. The composite coating bears low contact stress at 3 N and its wear mechanism is micro-cutting wear. As loads increase to 6-12 N, the contact stress is higher than the elastic limit stress of worn surface, and the wear mechanisms change into multi-plastic deformation wear, micro-brittle fracture wear and abrasive wear. With the increase of speeds, the contact temperature of worn surface increases. The composite coating experiences multi-plastic deformation wear, fatigue wear and adhesive wear.

Effect of TMS(nanostructured silicon dioxide) on growth of Changbai larch seedlings

The roots of 200 one-year-old Changbai Larch (Larix olgensis) seedlings were soaked for 6 hours at the TMS concentrations of 2000, 1000, 500, 250, 125, and 62 μL·L?1. Mean seedling height, root collar diameter, main root length and number of lateral roots were measured every 15 days during growing season from May 30 to Oct. 20. Experimental results showed that TMS treatments greatly promoted seedling growth and improved seedling quality. The treatment by 500 μL·L?1 TMS produced the best result, for which the mean height, root collar diameter, main root length, and the number of lateral roots of seedlings were increased by 42.5%, 30.7%, 14.0%, and 31.6%, respectively, compared to that of the control seedlings. As to seedling quality, grade-I seedling and grade-II seedlings were fifty-fifty, and no grade-III seedlings was found. The treatment by 500 μL·L?1 TMS resulted in the highest chlorophyll concentration. Keywords Changbai Larch - Larix olgensis - Seedling production - Nanostructured silicon dioxide CLC number S143.8 Document code B Foundation item: This study is supported by Jilin Forestry Group Co.Biography: LIN Baoshan (1955-), male, Associate professor at the college of forestry, Beihua University, Jilin City 132011, Jilin Province, P.R China.Responsible editor: Chai Ruihai.

Development of and Perspective on High-Performance Nanostructured Bainitic Bearing Steel

Bearings are the most important component of nearly all mechanical equipment, as they guarantee the steady running of the equipment, which is especially important for high-end equipment such as highspeed trains and shield tunneling machines. Requirements regarding the quality of bearings are increasing with the rapid development in technology. A country’s bearings manufacturing level directly reflects the level of that country’s steel metallurgy and machinery manufacturing. The performance of the bearing steel is the critical factor that determines the quality of a bearing. The development of new bearing steel with higher performance is the ambition of material researchers and the expectation of the manufacturing industry. Many famous bearing manufacturing enterprises are competing to develop the new generation of bearing steel. Nanostructured bainitic bearing steel (NBBS), which is a newly developed bearing steel, not only possesses high strength and toughness, but also exhibits excellent wear resistance and rolling contact fatigue (RCF) resistance. In recent years, relevant achievements in NBBS in China have led to significant progress in this field. NBBS was first used in China to manufacture large bearings for wind turbines and heavy-duty bearings, with excellent performance. As a result, NBBS and its corresponding heat-treatment process have been included in the national and industry standards for the first time. The bearing industry considers the exploitation of NBBS to be epoch-making, and has termed this kind of bearing as the second generation of bainitic bearing. In this paper, the development of NBBS is reviewed in detail, including its advantages and disadvantages. Further research directions for NBBS are also proposed.

Microstructure and properties of Al_2O_3-13%TiO_2 coatings sprayed using nanostructured powders

The microstructure and wear performance of M203-13% TiO2 coatings prepared by plasma spraying of agglom- erated nanoparticle powders were investigated. SEM analysis showed that the as-sprayed Al2O3-TiO2 coatings comprise of two kinds of typical region： fully melted region and unmelted/partially melted nanostructured region, which is different than the conventional coating with lamellar structure. It is shown that the microhardness of the nanostructured coatings was about 15%-30% higher than that of the conventional coating and the wear resistance is significantly improved, especially under a high wear load. The nanostructured coating sprayed at a lower power shows a lower wear resistance than the coatings produced at a higher power, because of the presence of pores and microstructural defects which are detrimental to the fracture toughness of the coatings.

Preparation and visible-light photocatalytic property of nanostructured Fe-doped TiO_2 from titanium containing electric furnace molten slag

Nanostructured Fe-doped titanium dioxide was synthesized from titanium containing electric furnace molten slag （TCEFMS） by using an alkali fusion, followed by a hydrolyzation-acidolysis-cMcination route. The effects of Mkali/slag mass ratio, calcinating temperature, calcinating time, and water/slag mass ratio on the extraction efficiency and purity of products were systematically studied in this paper. It is indicated that the best extraction efficiency of nanostructured Fe- doped titanium dioxide is 99.35%, when the molten slag is calcinated at 700℃ for 1 h with the mass ratio of alkali/molten slag of 1.5：1. The influence of alkali/slag mass ratio on the photocatalytic activity of final products was evaluated by the photodegradation of methyl blue under visible light irradiation. A maximum photodegradation efficiency of 88.12% over 30 min was achieved under the optimum conditions.

Laser Synthesis and Microfabrication of Micro/ Nanostructured Materials Toward Energy Conversion and Storage

Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics devices and even for biomedical purposes.In the past decade,laser as a synthetic technique and laser as a microfabrication technique facilitated nanomaterial preparation and nanostructure construction,including the laser processing-induced carbon and non-carbon nanomaterials,hierarchical structure construction,patterning,heteroatom doping,sputtering etching,and so on.The laser-induced nanomaterials and nanostructures have extended broad applications in electronic devices,such as light–thermal conversion,batteries,supercapacitors,sensor devices,actuators and electrocatalytic electrodes.Here,the recent developments in the laser synthesis of carbon-based and non-carbon-based nanomaterials are comprehensively summarized.An extensive overview on laser-enabled electronic devices for various applications is depicted.With the rapid progress made in the research on nanomaterial preparation through laser synthesis and laser microfabrication technologies,laser synthesis and microfabrication toward energy conversion and storage will undergo fast development.

Bone tissue engineering via nanostructured calcium phosphate biomaterials and stem cells

Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate （CAP） biomaterials/scaffolds are of special interest as they share chemical/crystallographic similarities to inorganic components of bone. Three applications of nano-CaP are discussed in this review： nanostructured calcium phosphate cement （CPC）; nano-CaP composites; and nano-CaP coatings. The interactions between stem cells and nano-CaP are highlighted, including cell attachment, orientation/ morphology, differentiation and in vivo bone regeneration. Several trends can be seen： （i） nano-CaP biomaterials support stem cell attachment/proliferation and induce osteogenic differentiation, in some cases even without osteogenic supplements; （ii） the influence of nano-CaP surface patterns on cell alignment is not prominent due to non-uniform distribution of nano-crystals; （iii） nano-CaP can achieve better bone regeneration than conventional CaP biomaterials; （iv） combining stem cells with nano-CaP accelerates bone regeneration, the effect of which can be further enhanced by growth factors; and （v） cell microencapsulation in nano-CaP scaffolds is promising for bone tissue engineering. These understandings would help researchers to further uncover the underlying mechanisms and interactions in nano-CaP stem cell constructs in vitro and in vivo, tailor nano-CaP composite construct design and stem cell type selection to enhance cell function and bone regeneration, and translate laboratory findings to clinical treatments.

Plasma Spray Forming of Nanostructured Composite Coatings

The nanostructure composite coating is obtained via plasma spraying of Al2O3-13 wt pct TiO2 powder. Brittle and hard lamella results from melted nanostructured powder. Ductile nanostructured matrix forms from unmelted nanostructured particles. Through the adjustment of constituent and nanostructure, hardness/strength and toughness/ductility are balanced and overall properties of the structure composite are achieved.

Preparation and characterization of nanostructured Al_2O_3-13wt.%TiO_2 ceramic coatings by plasma spraying

Nanostructured and conventional Al2O3-13wt.%TiO2 ceramic coatings were prepared by plasma spraying with nanostructured agglomerated and conventional powders, respectively. The microstructure and microhardness of the coatings were investigated using scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, and microhardness measurement. Meanwhile, the friction and wear behaviors were analyzed and compared using a ball-on-disk tribometer. The results show that the conventional coating has lamellar stacking characteristic and has some pores. However, the nanostructured coating shows a bimodal microstructure, which is composed of both fully melted regions and partially melted regions. According to the microstructural difference, the partially melted regions can be divided into liquid-phase sintered regions （a three-dimensional net or skeleton-like structure： Al2O3-rich submicron particles embedded in the TiO2-rich matrix） and solid-phase sintered regions （remained nanoparticles）. The microstructural characteristics of the liquid-phase sintered region are formed due to the selective melting of TiO2 nanoparticles during plasma spraying. On the other hand, the TiO2 and Al2O3 nanoparticles of the solid-phase sintered regions are all unmelted during plasma spraying. Due to the existence of nanostructured microstructures, the nanostructured coating has a higher microhardness, a lower friction coefficient, and a better wear resistance than the conventional coating.

3D skeleton nanostructured Ni_3S_2/Ni foam@RGO composite anode for high-performance dual-ion battery

The growing global demands of safe, low-cost and high working voltage energy storage devices trigger strong interests in novel battery concepts beyond state-of-art lithium-ion battery. Herein, a dualion battery based on nanostructured Ni_3S_2/Ni foam@RGO(NSNR) composite anode is developed, utilizing graphite as cathode material and LiPF6-VC-based solvent as electrolyte. The battery operates at high working voltage of 4.2–4.5 V, with superior discharge capacity of ～90 m A h g^(-1) at 100 mA g^(-1), outstanding rate performance, and long-term cycling stability over 500 cycles with discharge capacity retention of ～85.6%. Moreover, the composite simultaneously acts as the anode material and the current collector, and the corrosion phenomenon can be greatly reduced compared to metallic Al anode. Thus, this work represents a significant step forward for practical safe, low-cost and high working voltage dual-ion batteries,showing attractive potential for future energy storage application.

Effect of heat treatment on microstructures and mechanical properties of a bulk nanostructured Al-Zn-Mg-Cu alloy

A bulk nanostructured Al-10.0Zn-2.8Mg-1.8Cu alloy was synthesized by cryomilling first and then by spark plasma sintering （SPS）, and the effect of heat treatment on the microstructures and mechanical properties of this alloy were studied. Most MgZn2 particles with a coarse size lie on the grain boundaries of the SPS-processed sample. After solid solution and artificial aging, fine spherical-like MgZn2 particles precipitate uniformly in the grain interiors. No obvious grain growth is found after the heat treatment. A nanoindentation study indicates that no clear change is found in the Yong＇s modulus of the nanostructured alloy after the heat treatment. However, the hardness of the nanostructured alloy increases by about 33% after the heat treatment, which is attributed to the effect of precipitation-hardening.

Friction and Wear Behaviors of Nanostructured Metals

Nanostructured （ns） materials, i.e., polycrystalline materials with grain sizes in the nanometer regime （typically below 100 nm）, have drawn considerable attention in the past decades due to their unique properties such as high strength and hardness. Wear resistance of ns materials, one of the most important properties for engineering materials, has been extensively investigated in the past decades. Obvious differences have been identified in friction and wear behaviors Between the ns materials and their corresponding coarse-grained （cg） counterparts, consistently correlating with their unique structure characteristics and mechanical properties. On the other hand, the superior tribological properties of ns materials illustrate their potential applications under contact loads. The present overview will summarize the important progresses achieved on friction and wear behaviors of ns metallic materials, including ultrafine-grained （ufg） materials in recent years. Tribological properties and effects on friction and wear behaviors of ns materials will be discussed under different wear conditions including abrasive wear, sliding wear, and fretting wear. Their correlations with mechanical properties will be analyzed. Perspectives on development of this field will be highlighted as well.

A hybrid genipin-crosslinked dual-sensitive hydrogel/nanostructured lipid carrier ocular drug delivery platform

The objective of this study was to develop a novel hybrid genipin-crosslinked dual-sensitive hydrogel/nanostructured lipid carrier(NLC) drug delivery platform. An ophthalmic antiinflammatory drug, baicalin(BN) was chosen as the model drug. BN –NLC was prepared using melt-emulsification combined with ultra-sonication technique. Additionally, a dual pH-and thermo-sensitive hydrogel composed of carboxymethyl chitosan(CMCS) and poloxamer 407(F127) was fabricated by a cross-linking reaction with a nontoxic crosslinker genipin(GP). GP-CMCS/F127 hydrogel was characterized by FTIR, NMR, XRD and SEM. The swelling studies showed GP-CMCS/F127 hydrogel was both pH-and thermo-sensitive. The results of in vitro release suggested BN –NLC gel can prolong the release of baicalin comparing with BN eye drops and BN –NLC. Ex vivo cornea permeation study was evaluated using Franz diffusion cells. The apparent permeability coefficient(Papp) of BN –NLC gel was much higher(4.46-fold) than that of BN eye drops. Through the determination of corneal hydration levels, BN –NLC gel was confirmed that had no significant irritation to cornea. Ex vivo precorneal retention experiments were carried out by a flow-through approach. The results indicated that the NLC-based hydrogel can prolong precorneal residence time. In conclusion, the hybrid NLCbased hydrogel has a promising potential for application in ocular drug delivery.

Microstructure and Tribological Properties of Plasma-sprayed Nanostructured Sulfide Coating

The friction and wear properties of plasma-sprayed nanostructured FeS coating were investigated on an MHK- 500 friction and wear tester under both oil lubrication and dry friction condition. The microstructure, worn surface morphology and phase composition of the coating were characterized by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. It was found that the coating was mainly composed of FeS. a small quantity of Fe1-xS and oxide were also found. The coating was formed by small particles of 50～100 nm in size The thickness of the coating is approximately 150 μm. The friction-reduction and wear-resistance properties of plasma-sprayed nanostructured FeS coating were superior to that of GCr15 steel substrate. Especially under oil lubrication condition, the friction coefficient of nanostructured FeS coating was 50% of that of GCr15 steel, the wear scar widths of the coating were also reduced to nearly 50% of that of GCr15 steel under high load. The failure of the coating was mainly attributed to plastic deformation under both oil lubrication and dry friction condition.

State-of-the-Art and Perspectives in the Field of Particulate Nanostructured Materials

A great attention has been paid to the research and development of nanostructured materials.The main preparation methods of ultrafine particles and nanostructured materials have been summarized. The applications of zone typical nanostructured materials have also been reviewed.The peculiar characteristics and properties. such as density, grain size, hardness, superplasticity,magnetic and catalytic properties have been discussed

Activator-assisted electroless deposition of copper nanostructured films

This paper showed simple and effective synthesis of copper nanoparticles within controlled diameter using direct electroless deposition on glass substrates, following the sensitization and activation steps. Electroless-deposited metals, such as Cu, Co, Ni, and Ag, and their alloys had many advantages in micro- and nanotechnologies. The structural, morphological, and optical properties of copper deposits were characterized using X-ray diffraction （XRD）, atomic force microscopy （AFM）, and UV-Vis spectroscopy. The structural data was further analyzed using the Rietveld refinement program. Structural studies reveal that the deposited copper prefers a （111） orientation. AFM studies suggest the deposited materials form compact, uniform, and nanocrystalline phases with a high tendency to self-organize. The data show that the particle size can be controlled by controlling the activator concentration. The absorption spectra of the as-deposited copper nanoparticles reveal that the plasmonic peak broadens and exhibits a blue shift with decreasing particle size.

CHARACTERIZATION OF NANOSTRUCTURED MATERIALS BY ANALYTICAL ELECTRON MICROSCOPY

The analytical electron microscopy has been used to characterize the morphology,structure and composition of the nanostructured material of Sn- Bi alloy prepared by a modified electrohydrodynamic technique. The electron diffraction pattern and the corresponding contrast image for the discrete particles with a diameter smaller than 4 nm have been obtained.It is shown that the nanocrystalline Sn-Bi alloy particles comprise a single crystal of Bi-containing β-Sn solid solution or of Sn-containing Bi solid solution. A direct preparation procedure of the samples during the electrohydrodynamic rapid solidification process has been developed for electron microscopic observation.

Research Progress on Nanostructured Radar Absorbing Materials

Nanostructured radar absorbing materials (RAMs) have received steadily growing interest because of their fascinating properties and various applications compared with the bulk or microsized counterparts. The increased surface area, number of dangling bond atoms and unsaturated co-ordination on surface lead to interface polarization, multiple scatter and absorbing more microwave. In this paper, four types of nanostructured RAMs were concisely introduced as follows: nanocrystal RAMs, core-shell nanocomposite RAMs, nanocomposite of MWCNT and inorganic materials RAMs, nanocomposite of nanostructured carbon and polymer RAMs. Their microwave properties were described in detail by taking various materials as