A study on the seismic behavior of a retrofitted building based on nonlinear static and dynamic analyses

This study describes the seismic performance of an existing five storey reinforced concrete building which represents the typical properties of low-rise non-ductile buildings in Turkey. The effectiveness of shear walls and the steel bracings in retrofitting the building was examined through nonlinear static and dynamic analyses. By using the nonlinear static analysis, retrofitted buildings seismic performances under lateral seismic load were compared with each other. Moreover, the performance points and response levels of the existing and retrofitting cases were determined by way of the capacity-spectrum method described in ATC-40 (1996). For the nonlinear dynamic analysis the records were selected to represent wide ranges of duration and frequency content. Considering the change in the stiffness and the energy dissipation capacities, the performance of the existing and retrofitted buildings were evaluated in terms of story drifts and damage states. It was found that each earthquake record exhibited its own peculiarities, dictated by frequency content, duration, sequence of peaks and their amplitude. The seismic performance of retrofitted buildings resulted in lower displacements and higher energy dissipation capacity depending mainly on the properties of the ground motions and the retrofitting strategies. Moreover, severe structural damage (irreparable or collapse) was observed for the existing building. However, buildings with retrofit alternatives exhibited lower damage levels changing from no damage to irreparable damage states.

Nonlinearity analysis of piezoelectric micromachined ultrasonic transducers based on couple stress theory

This paper studies the static deformation behavior of a piezoelectric micromachined ultrasonic transducer （PMUT） actuated by a strong external electric field. The transducer membrane consists of a piezoelectric layer, a passive layer and two electrode layers. The nonlinearities of the piezoelectric layer caused by electrostriction under a strong electric field are analyzed. Because the thickness of the transducer membrane is on the microscale, the size dependence of the deformation behavior is evaluated using the couple stress theory. The results show that the optimal ratio of the top electrode diameter and the membrane diameter is around 0.674. It is also found that this optimal value does not depend on any other parameters if the thicknesses of the two electrodes are negligible compared with those of the piezo- electric and passive layers. In addition, the nonlinearities of the piezoelectric layer will become stronger along with the increase of the electric field, which means that softening of the membrane stiffness occurs when a strong external electric field is applied. Meanwhile, the optimal thickness ratio for the passive layer and the piezoelectric layer is not equal to 1.0 which is usually adopted by previous researchers. Because there exists size dependence of membrane deforma-tion, the optimal value of this thickness ratio needs to be greater than 1.0 on the microscale.

Seismic performance evaluation procedure of asymmetric plan structures

Plan asymmetry leads to lateral-rotational coupled effects on structural response characteristics.This investigation deals with a simplified method for performance estimation of structures with asymmetric plan.By taking the eccentric characteristics of structures into account,an equivalent triple-degree of freedom (ETDOF) system,which is constructed by eccentric mass,rigid links and springs,is proposed.The modal pushover analysis (MPA) method for asymmetric plan structures is proposed.The target displacement is determined by constant strength spectrum.The applicability of proposed method is discussed.A generic mass eccentric 4-story steel frame is analyzed by the proposed MPA procedure and nonlinear time history analysis (NTHA).The results show that the maximum deformation obtained from MPA has a good agreement with the NTHA results.The proposed MPA procedure is reliable and effective for evaluating the performance of asymmetric plan structures.