Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

Oil-gas two phase wax deposition is a fairly common and open-ended question in flow assurance of multiphase transportation pipelines.This paper investigated the two main aspects of oil-gas two phase wax deposition layer:apparent thickness and crystal structure characteristics.A typical highly paraffinic oil in Bohai Sea,China,was used as the experimental material to investigate the wax deposition thickness in oil-gas two phase under the influence of different oil temperatures,superficial gas/liquid phase velocities and gas-oil ratios by using multiphase flow loop experimental device.Just as in the classical theory of wax molecular diffusion,it showed that wax deposition thickness of oil-gas two phase increased with increasing oil temperature.Analysis of the impact of different superficial phase velocities found that the actual liquid flow heat transfer and shear stripping was the gas phase dominant mechanisms determining wax deposit thickness.In addition,the crystal structure of the wax deposition layer was characterized with the help of small-angle X-ray scattering(SAXS)for different circumferential positions,flow rates and gas-oil ratios.The bottom deposition layer had a complex crystal structure and high hardness,which were subject to change over flow rate variations.Furthermore,the SAXS results provided evidence that the indirect effect of the actual liquid velocity modified by the gas phase was the main mechanism.Our study of the effect of gas phase on the wax deposition of oil-gas two phase will help shed light onto the mechanism by which this important process occurs.Our findings address a very urgent need in the field of wax deposition of highly paraffinic oil to understand the flow security of oilgas two phase that occurs easily in multiphase field pipelines.

Paraffin–CaCl_(2)·6H_(2)O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill

The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency The addition of phase change materials (PCMs) to filling slurry and the use of the cold storage function of these materials to reduce downhole temperatures is an effective approach to alleviate the aforementioned problem.Paraffin–CaCl_(2)·6H_(2)O composite PCM was prepared in the laboratory.The composition,phase change latent heat,thermal conductivity,and cemented tailing backfill (CTB) compressive strength of the new material were studied.The heat transfer characteristics and endothermic effect of the PCM were simulated using Fluent software.The results showed the following:(1) The new paraffin–CaCl_(2)·6H_(2)O composite PCM improved the thermal conductivity of native paraffin while avoiding the water solubility of CaCl_(2)·6H_(2)O.(2) The calculation formula of the thermal conductivity of CaCl_(2)·6H_(2)O combined with paraffin was deduced,and the reasons were explained in principle.(3) The“enthalpy–mass scale model”was applied to calculate the phase change latent heat of nonreactive composite PCMs.(4)The addition of the paraffin–CaCl_(2)·6H_(2)O composite PCM reduced the CTB strength but increased its heat absorption capacity.This research can give a theoretical foundation for the use of heat storage backfill in green mines.

Emerging low-density polyethylene/paraffin wax/aluminum composite as a form-stable phase change thermal interface material

Thermal interface materials(TIMs) play a vital role in the thermal management of electronic devices and can significantly reduce thermal contact resistance(TCR). The TCR between the solid–liquid contact surface is much smaller than that of the solid–solid contact surface, but conventional solid–liquid phase change materials are likely to cause serious leakage. Therefore, this work has prepared a new formstable phase change thermal interface material. Through the melt blending of paraffin wax(PW) and low-density polyethylene(LDPE), the stability is improved and it has an excellent coating effect on PW. The addition of aluminum(Al) powder improves the low thermal conductivity of PW/LDPE, and the addition of 15wt% Al powder improves the thermal conductivity of the internal structure of the matrix by 67%. In addition, the influence of the addition of Al powder on the internal structure, thermal properties, and phase change behavior of the PW/LDPE matrix was systematically studied. The results confirmed that the addition of Al powder improved the thermal conductivity of the material without a significant impact on other properties, and the thermal conductivity increased with the increase of Al addition. Therefore, morphologically stable PW/LDPE/Al is an important development direction for TIMs.

新型复合相变储能材料Na/Paraffin的制备与性能分析

为提升广泛应用于相变储能领域的石蜡的导热系数,在手套箱内将导热系数高、熔点低、密度小的金属Na与石蜡复合为Na/paraffin新型相变储能材料,并对其导热系数、相变潜热及储/放热特性进行研究。结果表明:5%Na/95%paraffin复合相变储能材料导热系数较纯石蜡提高了17.6倍,储/放热速率均较纯石蜡提升了1倍;经过200次循环实验后,3%Na/97%paraffin复合相变储能材料相变温度由60.58℃下降到59.65℃,相变潜热由166.7520J·g^(-1)下降到160.5632J·g^(-1),热导率由2.33W·m^(-1)·K^(-1)减少到1.98W·m^(-1)·K^(-1)。

Formulating Highway Paving Asphalts from the Vacuum Residue of a Paraffinic Crude

Many specifications of paving asphalts are closely related to their colloidal stability, which is, however, determined by their exact chemical compositions. The Yumen vacuum residue (YVR), the bottoms of a paraffinic crude oil is unfit for the production of highway paving asphalts directly, Neither are the de-oiled asphalts of the YVR. In this research a blending method and an optimal process of solvent de-asphalts are adopted to investigate the feasibility of formulating highway-paving asphalts from YVR. Results show that highway paving asphalts are formulated by blending solvent de-oiled asphalts with one or more of the materials including YVR, decanted oil from FCC process, and furfural extracts from lubricating base stocks. Further investigations indicate that adding oil decanted from FCC process to the solvent de-asphalting process can increase the de-asphalted oil production, improve the de-oiled asphalts quality, and thus optimize the refinery processes. The methodology of this research can be extended even to refineries processing non-paraffinic crude oils.

Exploration of Methods for Preparation of Cattle Eyeball Paraffin Sections

[Objective] This study aimed to establish a new method for preparing paraffin sections of cattle eyebal s. [Method] The conventional method was used to prepare paraffin sections for cattle eyebal s in the control and a new method termed＆quot;opening a window on cornea and refixation＆quot; was used to prepare paraffin sections for cattle eyebal s in the treatment group. [Result] After the prepared specimens in the treatment group were fixed, it could be macroscopical y observed that retina and choroid were closely connected, with detachment occurring at a smal portion be-tween the two. According to the paraffin sections, it was microscopical y observed that the continuity of trabecular meshwork was intact, as wel as the continuity be-tween different layers of eyebal wal , without detachment between them, no retinal detachment, no shrinkage of each layer of tissue cells. [Conclusion] This study pro-vides a foundation for the basic research and pathological study of eyebal s.

Properties of Compound Systems of Paraffin Wax Emulsion and Copper Azole and Treated Wood

[Objective]Preservation and waterproof treatment are two crucial parts in wood protection, which can not only extend the service time, but also expand the application range of wood products. [Method] This work combined CA with paraffin wax emulsion to treat wood samples, and basic properties of the compound system, such as stability （storage stability and centrifugal stability）, particle size and pH val-ue, and water repel ency （water absorption, shrinkage and swel ing） of treated sam-ples were investigated. [Result and Conclusion] 1） the compound systems of CA and paraffin latex had a favorable miscibility and stability; 2） compared with untreated wood, CA-treated samples showed poor water repel ing properties, whereas samples treated with the compound systems indicated an obvious reduction in water absorp-tion, and the shrinkage and swel ing of them were improved as wel .

Interaction between Mitomycin C and DNA at Paraffined Graphite Electrode

Aim To investigate the electrochemical behaviors of Mitomycin C （MC） and its interaction with calf thymus DNA （ctDNA）. Methods The cyclic vohammetry （CV） was carried out at a paraffined graphite electrode. Results MC showed a well-defined oxidation-reduction peak. As a result of reaction with ctDNA, the peak current of MC decreased apparently. According to corresponding electrochemical equations, the diffusion coefficient of both free and MC-DNA complex have been determined, and the heterogeneous rate constants were also obtained simultaneously. Conclusion The solid paraffined graphite electrode could be used to estimate parameters of the interaction between DNA and MC, and provide the convenient and sensitive analysis.

A Paraffin Sectioning Method Without Using the Microtome and an Analysis Method for Optical Information of the Plant Anatomical Digital Photographs

[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant material softened or not was embedded in paraffin according to the paraffin method.Cut the thin paraffin sections from the paraffin block with a sharp two-sided blade under anatomical lens.The thin material sections rolled up when they were cut off.Took the section rolls to a slide,and then heated them to melt the paraffin section roll.When the paraffin melted,the sections of plant material were rolled out.After the common or simplified procedures of staining and mounting,the preparations were finished.When an anatomical digital photograph was processed,copy it into the word file and two copies of the original photograph were obtained.One copy was selected to make it to be a negative photograph,and then press the key ＂Press Screen＂ to copy the screen frame.After it was copied into the word file,cut of the unnecessary parts and other operations were carried out,then processed photograph was obtained.[Results] The anatomical preparation for research was gotten.The analyzed digital photograph of the leaf structure of Salix matsudana var.matsudana f.tortuosa has some a three-dimensional effect,and the different leaf structures and cells,e.g.cuticle,cell wall,protoplast,vein,etc.can be identified easily.[Conclusion]The paraffin method without using the microtome has advantages of low cost and higher efficiency,which could be applied by the beginner or in the time without a microtome to be used.The analysis of the plant anatomical digital photographs can acquire more structural information than the original digital photographs,which shows the potentiality and prospects of the optical information analysis of the microscopic imagery and its digital photograph.

Designing of an Automatic Paraffin Controlling Device for a Beam Well

Aiming at the paraffin-deposition problem of a beam well, the automatic paraffin-controlling device is designed by making use of ratchet-pallet mechanism, cam mechanism and modern designing method. The device has four main functions： paraffin-controlling, paraffin removal, centralizing the pumping rod, and improving the safety of well tubing. This device integrates the advantages of the paraffin control, such as strong magnetic paraffin controlling and mechanical paraffin-cutting. Theoretical analysis shows that this device has fine working reliability. It turns out to be a new device which can solve the paraffin-deposition problem of a beam well economically and efficiently.

Effects of Alcohol and Liquid Paraffin on Development of Early Mouse Embryos in vitro

In culturing early mouse embryos in vitro,liquid paraffin and alcohol exert deleterious influence on the development of embryos. Some of light liquid paraffin produced by Chinese factories have proved harmful for early mouse embryos. As shown by our experiments, the nitronaphthalene contained and the specific gravity of liquid paraffin were not involved in the injurious effects.However,alcohol mingled in medium had harmful effects on the development of embryos. At the 0.1% concentration of alcohol in medium the proportion of embryos developing to blastocysts decreased to 73.9%. When the concentration of alcohol was increased to 0.8%, all embryos ceased developing. In our experiments, CO_2 which contained 0.13% alcohol had no visible effects on the development of embrvos in vitro.

Multifunctional anti-wax coatings for paraffin control in oil pipelines

Paraffin deposition is a severe global problem during crude oil production and transportation.To inhibit the formation of paraffin deposits,the commonly used methods are mechanical cleaning,coating the pipe to provide a smooth surface and reduce paraffin adhesion,electric heating,ultrasonic and microbial treatments,the use of paraffin inhibitors,etc.Pipeline coatings not only have the advantages of simple preparation and broad applications,but also maintain a long-term efficient and stable effect.In recent years,important progress has been made in research on pipe coatings for mitigating and preventing paraffin deposition.Several novel superhydrophilic organogel coatings with low surface energy were successfully prepared by bionic design.This paper reviews different types of coatings for inhibiting wax deposition in the petroleum industry.The research prospects and directions of this rapidly developing field are also briefly discussed.

Preparation and hygrothermal performance of composite phase change material wallboard with humidity control based on expanded perlite/diatomite/paraffin

Phase change material(PCM)can reduce the indoor temperature fluctuation and humidity control material can adjust relative humidity used in buildings.In this study,a kind of composite phase change material particles(CPCMPs)were prepared by vacuum impregnation method with expanded perlite(EP)as supporting material and paraffin as phase change material.Thus,a PCM plate was fabricated by mould pressing method with CPCMPs and then composite phase change humidity control wallboard(CPCHCW)was prepared by spraying the diatom mud on the surface of PCM plate.The composition,thermophysical properties and microstructure were characterized using X-ray diffraction instrument(XRD),differential scanning calorimeter(DSC)and scanning electron microscope(SEM).Additionally,the hygrothermal performance of CPCHCW was characterized by temperature and humidity collaborative test.The results can be summarized as follows:(1)CPCMPs have suitable phase change parameters with melting/freezing point of 18.23°C/29.42°C and higher latent heat of 54.66 J/g/55.63 J/g;(2)the diatom mud can control the humidity of confined space with a certain volume;(3)the combination of diatom mud and PCM plate in CPCHCW can effectively adjust the indoor temperature and humidity.The above conclusions indicate the potential of CPCHCW in the application of building energy efficiency.

Preparation and Properties of Paraffin/PMMA Shape-stabilized Phase Change Material for Building Thermal Energy Storage

The composite phase change material(PCM) consisting of phase change paraffin(PCP) and polymethyl methacrylate(PMMA) was prepared as a novel type of shape-stabilized PCM for building energy conservation through the method of bulk polymerization. The chemical structure, morphology, phase change temperature and enthalpy, and mechanical properties of the composite PCM were studied to evaluate the encapsulation effect of PMMA on PCP and determine the optimal composition proportion. FTIR and SEM results revealed that PCP was physically immobilized in the PMMA so that its leakage from the composite was prevented. Based on the thermo-physical and mechanical properties investigations, the optimal mass fraction of PCP in the composite was determined as 70%. The phase change temperature of the composite was close to that of PCP, and its latent heat was equivalent to the calculated value according to the mass fraction of PCP in the composite. For estimating the usability in practical engineering, thermal stability, reliability and temperature regulation performance of the composite were also researched by TG analysis, thermal cycling treatments and heating-cooling test. The results indicated that PCP/PMMA composite PCM behaved good thermal stability depending on the PMMA protection and its latent heat degraded little after 500 thermal cycling. Temperature regulation performance of the composite before and after thermal cycling was both noticeable due to its latent heat absorption and release in the temperature variation processes. The PCP/PMMA phase change plate was fabricated and applied as thermal insulator in miniature concrete box to estimate its temperature regulation effect under the simulated environmental condition. It can be concluded that this kind of PCP/PMMA shape-stabilized PCM with the advantages of no leakage, suitable phase change temperature and enthalpy, good thermal stability and reliability, and effective temperature regulation performance have much potential for thermal energy storage in building energy conservation.

PREPARATION OF MICROPOROUS ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) BY THERMALLY INDUCED PHASE SEPARATION OF A UHMWPE/LIQUID PARAFFIN MIXTURE

Ultra-high molecular weight polyethylene (UHMWPE) with a microporous structure was prepared via thermally induced phase separation (TIPS).Liquid paraffin (LP) was used as a diluent in the preparation of microporous UHMWPE. Small angle laser light scattering (SALLS) and differential scanning calorimetry (DSC) were used to determine the phase separation temperatures,i.e.the cloud points and the dynamic crystallization temperatures,respectively.It was found that the cloudI points were coincident with the cryst...

Application of an indirect immunofluorescent staining method for detection of Salmonella enteritidis in paraffin slices and antigen location in infected duck tissues

AIM： To detect Salmonella enteritidis （S. enteritidis） in paraffin slices and antigen location in infected duck tissues. METHODS： The rabbits were immunized with purified bacillus to obtain S. enteritidis-specific antibody, which were then extracted by the caprylic-ammonium sulphate method, purified through High-Q columns. An indirect immuno-fluorescent staining method （IFA） was established to detect the S. enteritidis antigen in paraffin slices. Detected S. enteritidis in each organ tissue of ducklings experimentally infected with S. enteritidis. RESULTS： The gland of Garder, heart, kidney, spleen, liver, brain, ileum, jejunum, bursa of Fabricius from S. enteritidis experimentally infected ducklings were positive or strongly positive, and the S. enteritidis antigen mainly distributed in the infected cell cytoplasm.CONCLUSION： IFA is an intuitionist, sensitive and specific method in detecting S. enteritidis antigen in paraffin wax slices, and it is a good method in diagnosis and antigen location of S. enteritidis. We also conclude that the gland of Garder, heart, kidney, spleen, liver, ileum, jejunum are target organs in S. enteritidis infections of duck, and S. enteritidis is an intracellular parasitic bacterium.

Hydrocarbon-Degrading Bacteria and Paraffin from Polluted Seashores 9 Years after the Nakhodka Oil Spill in the Sea of Japan

Pollution of petroleum hydrocarbons, in particular oil spills, has attracted much attention in the past and recent decades. Oil spills influence natural microbial community, and physical and chemical properties of the affected sites. The biodegradation of hydrocarbons by microorganisms is one of the primary ways by which oil spill is eliminated from contaminated sites. One such spill was that of the Russian tanker the Nakhodka that spilled heavy oil into the Sea of Japan on January 2, 1997. The impact of the Nakhodka oil spill resulted in a viscous sticky fluid fouling the shores and affected natural ecosystems. This paper describes the weathering of hydrocarbon-degrading bacteria （genus Pseudomonas） and crystallized organic compounds from the Nakhodka oil spill-polluted seashores after nine years. The Nakhodka oil has hardened and formed crust of crystalline paraffin wax as shown by XRD analysis （0.422, 0.377, and 0.250 nm d-spacing） in association with graphite and calcite after 9 years of bioremediation. Anaerobic reverse side of the oil crust contained numerous coccus typed bacteria associated with halite. The finding of hydrocarbon-degrading bacteria and paraffin wax in the oil crust may have a significant effect on the weathering processes of the Nakhodka oil spill during the 9- year bioremediation.

Novel Approach for Improved Tribological Behavior of Biodiesel Soot in Liquid Paraffin

To improve the tribological behavior of biodiesel soot(BDS) in liquid paraffin(LP), the order of biodiesel soot was increased through thermally oxidized treatment at 500 ℃, and the oil solubility was then improved through a modification using oleylamine(OLA). The BDS and thermally oxidized oleylamine-modified BDS(T-BDS-OLA)were characterized through various methods including the use of TG, FETEM, Raman spectroscopy, FTIR, and a zeta potentiometer. The tribological properties and mechanisms of the BDS before and after the thermally oxidized treatment modification were investigated using a ball-on-disc reciprocating tribometer, FESEM, 3 D laser-scanning microscopy, and Raman spectroscopy. The results showed that T-BDS-OLA has a higher degree of order than the BDS, with an onion-like microstructure. BDS and T-BDS-OLA can both improve the antifriction and antiwear properties of LP at a soot content of 0.1%-0.4%, while T-BDS-OLA in LP shows better antifriction and antiwear properties than BDS. The tribological mechanisms can be attributed to both types of soot acting as spacing and roll bearing between the friction surfaces. In addition, the exfoliated graphitic sheets from T-BDS-OLA can form a carbon lubrication layer providing easy sliding.

Paraffin section observation of flower bud differentiation of Chimonanthus praecox in Kunming and comparison of the differentiation processes in different regions,China

Chimonanthus praecox is an important ornamental plant and cut flower material in China.It blooms in the freezing winter and its flower emits charming fragrance.However,in different region the flowering time is variable.In order to understand the flowering mechanism of Ch.praecox in the winter,we studied the flower bud differentiation in Spring City-Kunming using paraffin sectioning method in the present study.Meanwhile we compared the differentiation process difference from different regions.It was found that the temperature is the key factor for its flower bud differentiation and blossom of Ch.praecox.In the process of bud differentiation,the temperature 20℃was the optimum for inducing changes from vegetative axillary buds to reproductive buds and subsequent morphological differentiation in Ch.praecox.Furthermore in the first three differentiation periods—tepal primordial stage,staminal primordial stage and pistil primordial stage,Kunming took the shortest time to finish the process due to very rapid temperature rise to 20℃,whereas,in Zhengzhou the time for these differentiations was the longest,which may be caused by the slow temperature rise.After May,the high temperature stress forced the flower buds into the first long dormant period in all regions except Kunming.In Kunming,the average temperature was only 20–25℃,so the flower bud continued to differentiate.In all regions,Kunming is the first to complete whole flower bud differentiation even on the early August,and started the second dormancy very early but very long.In the other regions,the plants went through a shorter dormancy and the low temperature broke the dormancy rapidly.Contrarily the plants of Kunming spent a longer period for the low temperature.Thus,the low temperature less than 10℃is a key factor to breaking the second dormancy.Surely the regular effects of temperature on flower bud differentiation and blossom is very helpful for florescence regulation of Ch.praecox.

Preparation of Paraffin Section of Pinus sylvestris Needles

[Objective] Taking Pinus sylvestris needles as materials, a set of test con-ditions suitable for the preparation of paraffin sections of Pinus sylvestris needles was determined. [Method] Based on the traditional method for paraffin sections preparation, steps including fixation, dehydration, adhering to slides and staining were investigated taking the structural characteristics of pine needles into considera-tion. [Result] 70% ethanol was used in the FAA fixative; before affixed on slides, the cut sections were first expanded in a 40 ℃ water bath and taken out by using Su-perfrost Plus slides, fol owed by drying in a 35 ℃ oven for 24 h; pine needles were cut into 8 μm thick sections; staining was achieved by immersion in eosin for 5 min and in hematoxylin for 1 min. [Conclusion] The conditions obtained above can en-hance the effect of fixation and dehydration; adhering to slides is easy to operate and the sections are not easy to drop; the dyeing effect is relatively preferable.