Ethyl acetate fraction of Sargassum pallidum extract attenuates particulate matter-induced oxidative stress and inflammation in keratinocytes and zebrafish

Objective:To evaluate the effect of the ethyl acetate fraction derived from Sargassum pallidum extract against particulate matter(PM)-induced oxidative stress and inflammation in HaCaT cells and zebrafish.Methods:HaCaT cells and zebrafish were used to evaluate the protective effects of the ethyl acetate fraction of Sargassum pallidum extract against PM-induced oxidative stress and inflammation.The production of nitric oxide(NO),intracellular ROS,prostaglandin E_(2)(PGE_(2)),and pro-inflammatory cytokines,and the expression levels of COX-2,iNOS,and NF-κB were evaluated in PM-induced HaCaT cells.Furthermore,the levels of ROS,NO,and lipid peroxidation were assessed in the PM-exposed zebrafish model.Results:The ethyl acetate fraction of Sargassum pallidum extract significantly decreased the production of NO,intracellular ROS,and PGE_(2) in PM-induced HaCaT cells.In addition,the fraction markedly suppressed the levels of pro-inflammatory cytokines and inhibited the expression levels of COX-2,iNOS,and NF-κB.Furthermore,it displayed remarkable protective effects against PM-induced inflammatory response and oxidative stress,represented by the reduction of NO,ROS,and lipid peroxidation in zebrafish.Conclusions:The ethyl acetate fraction of Sargassum pallidum extract exhibits a protective effect against PM-induced oxidative stress and inflammation both in vitro and in vivo and has the potential as a candidate for the development of pharmaceutical and cosmeceutical products.

Changes on Stroke Burden Attributable to Ambient Fine Particulate Matter in China

Objective In recent decades,China has implemented a series of policies to address air pollution.We aimed to assess the health effects of these policies on stroke burden attributable to ambient fine particulate matter(PM_(2.5)).Methods Joinpoint regression was applied to explore the temporal tendency of stroke burden based on data from the Global Burden of Disease 2019 study.Results The age-standardized rates of disability-adjusted life year(DALY)for stroke attributable to ambient PM2.5 in China,increased dramatically during 1990-2012,subsequently decreased at an annual percentage change(APC)of-1.98[95% confidence interval(CI):-2.26,-1.71]during 2012-2019.For ischemic stroke(IS),the age-standardized DALY rates doubled from 1990 to 2014,and decreased at an APC of-0.83(95%CI:-1.33,-0.33)during 2014-2019.Intracerebral hemorrhage(ICH)showed a substantial increase in age-standardized DALY rates from 1990 to 2003,followed by declining trends,with APCs of-1.46(95%CI:-2.74,-0.16)during 2003-2007 and-3.33(95%CI:-3.61,-3.06)during 2011-2019,respectively.Conversely,the age-standardized DALY rates for subarachnoid hemorrhage(SAH)generally declined during 1990-2019.Conclusion Our results clarified the dynamic changes of the ambient PM_(2.5)-attributable stroke burden in China during 1990-2019,highlighting the health effects of air quality improvement policies.

Multi-Pollutant Formation and Control in Pressurized Oxy-Combustion:SO_(x),NO_(x),Particulate Matter,and Mercury

Oxy-combustion is a promising carbon-capture technology,but atmospheric-pressure oxy-combustion has a relatively low net efficiency,limiting its application in power plants.In pressurized oxycombustion(POC),the boiler,air separation unit,flue gas recirculation unit,and CO_(2)purification and compression unit are all operated at elevated pressure;this makes the process more efficient,with many advantages over atmospheric pressure,such as low NO_(x)emissions,a smaller boiler size,and more.POC is also more promising for industrial application and has attracted widespread research interest in recent years.It can produce high-pressure CO_(2)with a purity of approximately 95%,which can be used directly for enhanced oil recovery or geo-sequestration.However,the pollutant emissions must meet the standards for carbon capture,storage,and utilization.Because of the high oxygen and moisture concentrations in POC,the formation of acids via the oxidation and solution of SO_(x)and NO_(x)can be increased,causing the corrosion of pipelines and equipment.Furthermore,particulate matter(PM)and mercury emissions can harm the environment and human health.The main distinction between pressurized and atmospheric-pressure oxy-combustion is the former’s elevated pressure;thus,the effect of this pressure on the pollutants emitted from POC—including SO_(x),NO_(x),PM,and mercury—must be understood,and effective control methodologies must be incorporated to control the formation of these pollutants.This paper reviews recent advances in research on SO_(x),NO_(x),PM,and mercury formation and control in POC systems that can aid in pollutant control in such systems.

Characteristics and fate behavior of environmentally persistent free radicals in atmospheric particulate matter

Background,aim,and scope Environmentally persistent free radicals(EPFRs)have received significant attention due to their longer lifetime and stable existence in various environments.The strong environmental migration ability of particulate matter allows EPFRs to migrate over long-distance transport,thereby impacting the quality of the local atmospheric environment.Additionally,EPFRs can also adhere to atmospheric particles and interact with typical gaseous pollutants to affect atmospheric chemical reactions.EPFRs can produce some reactive organic species,promoting oxidative stress in the human body,damaging biological macromolecules and ultimately affecting the organism health.EPFRs are considered as a novel type of pollutant that affects human health.Despite their significance,there are few literatures available on the characteristics and fate behaviors of EPFRs up to date.Therefore,supplemental reviews are crucial for providing comprehensive understanding of EPFRs.Materials and methods This review summarizes the characteristics of EPFRs in particulate matter,outlines the generation mechanism and influencing factors of EPFRs,and the impacts of EPFRs on environmental quality and organism health.Results The content of EPFRs in particulate matter ranges from 1017 to 1020 spins∙g−1.Due to the strong mobility of atmospheric particulate matter,the long-term exposure to high levels of EPFRs may aggravate the impact of particulate matter on human health.The interaction between EPFRs and typical gaseous pollutants can alter their fate and influence atmospheric chemical reactions.EPFRs are mainly produced by transition metal elements and substituted aromatic hydrocarbons through electron transfer.Additionally,the chemical bond rupture of organic substances through heat treatment or ultraviolet radiation can also produce EPFRs,and heterogeneous reactions are capable producing them as well.The production of EPFRs is not only influenced by transition metal elements and precursors,but also by various environmental factors such as oxygen,temperature,light radiation,and relative humidity.Discussion EPFRs in atmospheric particulates matters are usually rich in fine particulates with obvious seasonal and regional variations.They can easily enter the human respiratory tract and lungs with inhalable particulates,thereby increasing the risk of exposure.Additionally,EPFRs in atmospheric particulates can interact with some typical gaseous pollutants,impacting the life and fate of EPFRs in the atmosphere,and alter atmospheric chemical reactions.Traditionally,EPFRs are generated by transition metal elements and substituted aromatic hydrocarbons undergoing electron transfer in the post-flame and cool-zone regions of combustion systems and other thermal processes to remove HCl,H_(2)O or CO groups,ultimately produce semiquinones,phenoxyls,and cyclopentadienyls.Recent studies have indicated that EPFRs can also be generated under the conditions of without transition metal elemental.Organics can also produce EPFRs through chemical bond rupture during heat treatment or light radiation conditions,as well as through some heterogeneous reactions and photochemical secondary generation of EPFRs.The presence or absence of oxygen has different effects on the type and yield of EPFRs.The concentration,type,and crystal type of transition metal elements will affect the type,content,and atmospheric lifetime of EPFRs.It is generally believed that the impact of transition metal element types on EPFRs is related to the oxidation-reduction potential.The combustion temperature or heat treatment process significantly affects the type and amount of EPFRs.Factors such as precursor loading content,pH conditions,light radiation and relative humidity also influence the generation of EPFRs.EPFRs can interact with pollutants in the environment during their migration and transformation process in environmental medium.This process accelerates the degradation of pollutants and plays a crucial role in the migration and transformation of organic pollutants in environmental media.The reaction process of EPFRs may lead to the production of reactive oxygen species(ROS)such as∙OH,which can induce oxidative stress,inflammation and immune response to biological lung cells and tissues,leading to chronic respiratory and cardiopulmonary dysfunction,cardiovascular damage and neurotoxic effects,ultimately impacting the health of organisms.Conclusions The interaction mechanism between EPFRs in particulate matter and gaseous pollutants remains unclear.Furthermore,research on the generation mechanism of EPFRs without the participation of transition metals is not comprehensive,and the detection of EPFRs is limited to simple qualitative categories and lack accurate qualitative analysis.Recommendations and perspectives Further research should be conducted on the generation mechanism,measurement techniques,migration pathways,and transformation process of EPFRs.It is also important to explore the interaction between EPFRs in atmospheric particulate matter and typical gaseous pollutants.

Chemical Determination of Base Status Metals in Soil Sediments and Particulate Matter in Wellington Industrial Estate Location

This research study explored the levels of base status metals in soil sediments and particulate matter in the wellington industrial estate location;the main objectives were to: 1) determine sodium and potassium, 2) determine calcium and magnesium, 3) determine available iron. The following hypotheses were put forward;H0a: there is no significant difference in the concentration levels between Ca and Mg in the study area, H1a: there is significant difference in the concentration levels between Ca and Mg in the study area, H0b: there is no significant difference in the concentration levels between Na and K in the study area, H1b: there is significant difference in the concentration levels between Na and K in the study area. Six locations were used to collect samples with the aid of scoop and gravel free auger (at varying depths of 0 - 5 cm and 5 - 10 cm) which are Wellington Industrial Estate Area 1 (WIEL 1), (WIEL 2), (WIEL 3), (WIEL 4), (WIEL 5), (WIEL 6);the samples were given laboratory treatment. Flame photometer, EDTA, and Spectrophotometer were used in the determinations of sodium and potassium, calcium and magnesium, and available iron respectively. The results indicated that levels of potassium were in medium range (moderately high);sodium levels were generally low when compared to Brook’s classification table. Levels of calcium were generally low and those of magnesium were moderate based on Brook’s table of classification. Levels of available iron which fall within the range of Quijano-Guerta (2003) were high;this implies such levels can lead to toxicity. In all locations, there was decrease in the levels of each metal in the samples with (5 - 10 cm) depth.

Monitoring of Air Quality for Particulate Matter (PM2.5, PM10) and Heavy Metals Proximate to a Cement Factory in Ewekoro, Nigeria

A cement factory nearby communities raise pollution concerns. This study assessed air pollution levels for respirable particulate matter (PM2.5 and PM10) and heavy metals (lead, chromium, nickel, cadmium, zinc and copper) adjacent to a cement factory in Ewekoro and neighbouring communities (Papalantoro, Lapeleko and Itori) in Ogun State, Nigeria. Respirable particulate matter (PM2.5 and PM10) and heavy metals were measured using an ARA N-FRM cassette sampler. Each location sampled was monitored for eight continuous hours daily for 12 days. The PM2.5, PM10 and heavy metals results were compared with different standards, including those of the World Health Organization (WHO), Nigeria’s National Environmental Standard and Regulation Enforcement Agency (NESREA) and Canadian Ambient Air Quality Standards (CAAQS). The PM levels fell within 11 - 19 μg/m3 of the air management level of CAAQS, which signifies continuous actions are needed to improve air quality in the areas monitored but below the NESREA standard. The mean Cd, Cr and Ni concentrations in the cement factory area and the impacted neighbourhoods are higher than the WHO/EU permissible limits, while Zn and Cu were below the WHO/EU permissible limit. A risk assessment hazard quotient (HQ) for Cr was above the WHO/EU safe level (=1) in adults and children throµgh ingestion, inhalation and dermal contact at all the monitoring sites. The HQ for Ni and Cd was higher than the safe level in the cement factory area and Papalantoro, while Zn was at safe levels.

Modeling and Characterization of Fine Particulate Matter Dynamics in Bujumbura Using Low-Cost Sensors

Air pollution is a result of multiple sources including both natural and anthropogenic activities. The rapid urbanization of the cities such as Bujumbura, economic capital of Burundi, is one of these factors. The very first characterization of the spatio-temporal variability of PM2.5 in Bujumbura and the forecasting of PM2.5 concentration have been conducted in this paper using data collected during a year, from August 2022 to August 2023, by low-cost sensors installed in Bujumbura city. For each commune, an hourly, daily and seasonal analysis was carried out and the results showed that the mass concentrations of PM2.5 in the three municipalities differ from one commune to another. The average hourly and annual PM2.5 concentrations exceed the World Health Organization standards. The range is between 28.3 and 35.0 μg/m3. In order to make a prediction of PM2.5 concentration, an investigation of Recurrent Neural Networks with Long Short-Term Memory has been undertaken.

Particulate flow modelling in a spiral separator by using the Eulerian multi-fluid VOF approach

The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.

Morphology,Nanostructure,and Oxidation Reactivity of Particulate Matter Emitted by Diesel Blending with Various Aromatics

This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.

Forest management causes soil carbon loss by reducing particulate organic carbon in Guangxi, Southern China

Background: The loss of soil organic carbon(SOC) following conversion of natural forests to managed plantations has been widely reported. However, how different SOC fractions and microbial necromass C(MNC) respond to forest management practices remains unclear.Methods: We sampled 0–10 cm mineral soil from three different management plantations and one protected forest in Guangxi, Southern China, to explore how forest management practices affect SOC through changing mineralassociated C(MAOC) and particulate organic C(POC), as well as fungal and bacterial necromass C.Results: Compared with the protected forest, SOC and POC in the abandoned, mixed and Eucalyptus plantations significantly decreased, but MAOC showed no significant change, indicating that the loss of SOC was mainly from decreased POC under forest management. Forest management also significantly reduced root biomass, soil extractable organic C, MNC, and total microbial biomass(measured by phospholipid fatty acid), but increased fungi-to-bacteria ratio(F:B) and soil peroxidase activity. Moreover, POC was positively correlated with root biomass, total microbial biomass and MNC, and negatively with F:B and peroxidase activity. These results suggested that root input and microbial properties together regulated soil POC dynamics during forest management.Conclusion: Overall, this study indicates that forest management intervention significantly decreases SOC by reducing POC in Guangxi, Southern China, and suggests that forest protection can help to sequester more soil C in forest ecosystems.

Ambient Fine Particulate Matter Exposure and Blood Pressure:Evidence from a Large Chinese Multiple Follow-Up Study

Objective This study aimed to investigate the association of ambient PM_(2.5)exposure with blood pressure(BP)at the population level in China.Methods A total of 14,080 participants who had at least two valid blood pressure records were selected from the China Health and Retirement Longitudinal Survey during 2011–2015.Their long-term PM_(2.5)exposure was assessed at the geographical level,on the basis of a regular 0.1°×0.1°grid over China.A mixed-effects regression model was used to assess associations.Results Each decrease of 10μg/m^(3)in the 1 year-mean PM_(2.5)concentration(FPM1Y)was associated with a decrease of 1.24[95%confidence interval(CI):0.84–1.64]mmHg systolic BP(SBP)and 0.50(95%CI:0.25–0.75)mmHg diastolic BP(DBP),respectively.A robust association was observed between the long-term decrease in PM_(2.5)and decreased BP in the middle-aged and older population.Using a generalized additive mixed model,we further found that SBP increased nonlinearly overall with FPM1Y but in an approximately linear range when the FPM1Y concentration was<70μg/m^(3);In contrast,DBP increased approximately linearly without a clear threshold.Conclusion Efficient control of PM_(2.5)air pollution may promote vascular health in China.Our study provides robust scientific support for making the related air pollution control policies.

Human Health Risks from Exposure to Heavy Metals of Suspended Particulate Matter around the Tongon Gold Mine, Côte d’Ivoire

The Tongon mine, the largest gold mine in C?te d’Ivoire, has been in operation since April 2010. However, to our knowledge to date, no study has been conducted on metallic contamination in suspended particulate matter (PM10 and PM2.5) where there is a lack of information on the carcinogenic and non-carcinogenic risk to human health associated with the exposure of populations in the Tongon area to these pollutants. The general objective of this study is to evaluate the level of contamination of PM10;PM2.5 by heavy metals and their impact on the health of populations exposed to these pollutants in the Tongon gold mine area. The sampling and measurement of suspended particulate matter (PM10 and PM2.5) were done using a MiniVol TAS passive air sampler. Heavy metal concentrations were determined by inductively coupled plasma mass spectroscopy (Nex ION 2000 ICP-MS, USA). The results indicate that the average concentrations of suspended particles (PM2.5 and PM10) obtained are all above the recommended exposure limits. In addition, among the heavy metals contained in the suspended particles, the concentrations of arsenic and nickel are high and all above the standard limit values. The assessment of the health risks related to the inhalation of PM10 particles reveals that their inhalation over a long period could cause a carcinogenic risk.

Spatial Analysis of Fine Particulate Matter (PM2.5) in South St. Boniface and Mission Industrial Area, Winnipeg, Manitoba, Canada

Particulate matter smaller than 2.5 microns (PM2.5) stays airborne for long periods and can enter the lungs, increasing respiratory and cardiovascular risks. Metal shredders are known sources of PM2.5, lead and other heavy metals. Winnipeg residents of South Saint Boniface (SSB) in Manitoba, Canada, live downwind of the Mission Industrial Area (MIA), which includes a metal shredder, train tracks and other industries. Residents are concerned about the MIA air and noise pollution and wanted ambient air quality monitoring in their mixed land-use area to understand its impact on their health. We measured and mapped the daytime PM2.5, from the MIA and South St. Boniface (SSB) neighborhoods using the Dylos DC 1700 PM over seven months. The Dylos air quality data for PM2.5 was validated by the two federal reference monitors in the city, finding a moderate to very strong correlation (r = 0.52 to 0.83;p-value 0.001), confirming good accuracy. A spatial analysis of the emission data showed that the highest pollution concentration was downwind of the scrap metal shredder in MIA. One-way ANOVA and Pearson correlation analysis revealed significantly higher levels of PM2.5 at MIA and SSB than at the reference sites, which are away from pollution sources. The PM2.5 Canadian Ambient Air Quality Standard (CAAQS) of 27 μg/m3 was exceeded downwind of the property line of the scrap metal shredder in the MIA for five of the 35 monitoring days averaging between 28.9 μg/m3 to 38.1 μg/m3 over eight hours. The standard was not exceeded in the residential area, although PM2.5 levels higher than background levels increased SSB residents exposure levels. This exceedance of regulatory standards requires action to reduce emissions.

Physicochemical Characterization of Settling Particulate Matter and Sediments

The thrust of this research study was to ascertain the physicochemical characteristic in settling particulate matter and sediments of samples collected from the wellington industrial estate flood plains;the main of objectives are as follows: to determine the hydrogen ion index (pH) of the samples collected in the study area, to determine the electrical conductivity (EC) of the samples collected from the same location. Samples were collected from six locations (at varying depths of 0 - 5 cm and 5 - 10 cm) sample area 1 (Wellington Industrial Estate Area 1) WIEA1 WIEA 2, WIEA 3, WIEA 4, WIEA 5 and WIEA 6 and were given laboratory treatment. A laboratory thermometer was used to determine temperature of the samples when collected;(Dakton model) pH meter equipment and a Toledo electrical conductivity meter were used to determine the pH and EC respectively. The results indicated that the samples were acidic (low pH) and the conductivity of the samples was of medium and low range. This therefore expressed low levels of soluble metal ions in the environment that have effect on plants, animals and other organisms, agricultural and domestic activities in the environment under investigation. Hence bioconcentration and biomagnification are highly likely in these locations.

Spatial and Temporal Variation of Particulate Matter (PM10 and PM2.5) and Its Health Effects during the Haze Event in Malaysia

This study aims to assess and compare levels of particulate matter(PM10 and PM2.5)in urban and industrial areas in Malaysia during haze episodes,which typically occur in the south west monsoon season.The high concentrations of atmospheric particles are mainly due to pollution from neighbouring countries.Daily PM concentrations were analysed for urban and industrial areas including Alor Setar,Tasek,Shah Alam,Klang,Bandaraya Melaka,Larkin,Balok Baru,and Kuala Terengganu in 2018 and 2019.The analysis employed spatiotemporal to examine how PM levels were distributed.The data summary revealed that PM levels in all study areas were right-skewed,indicating the occurrence of high particulate events.Significant peaks in PM concentrations during haze events were consistently observed between June and October,encompassing the south west monsoon and inter-monsoon periods.The study on acute respiratory illnesses primarily focused on Selangor.Analysis revealed that Klang had the highest mean number of inpatient cases for acute exacerbation of bronchial asthma(AEBA)and acute exacerbation of chronic obstructive pulmonary disease(AECOPD)with values of 260.500 and 185.170,respectively.Similarly,for outpatient cases of AEBA and AECOPD,Klang had the highest average values of 41.67 and 14.00,respectively.Shah Alam and Sungai Buloh did not show a significant increase in cases during periods of biomass burning.The statistical analysis concluded that higher concentrations of PM were associated with increased hospital admissions,particularly from June to September,as shown in the bar diagram.Haze episodes were associated with more healthcare utilization due to haze-related respiratory illnesses,seen in higher inpatient and outpatient visits(p<0.05).However,seasonal variability had minimal impact on healthcare utilization.These findings offer a comprehensive assessment of PM levels during historic haze episodes,providing valuable insights for authorities to develop policies and guidelines for effective monitoring and mitigation of the negative impacts of haze events.

Experimental Study on the Effect of Humidification on the Pollution Characteristics of Particulate Matter in the Office

Indoor air quality has a direct impact on human health. Indoor air quality has aroused great concern. This experimental study compares the effects of different water humidification on the indoor particulate pollution characteristics, and analyzes the mass concentration and the particulate number concentration distribution of different sizes of particulates with time under each condition of the purified water humidification, the tap water humidification and the cold boiled water humidification in the office. The results show that under the three kinds of wetting conditions, the concentration of the fine particulates is higher. More minerals are contained in the tap water and the cold boiled water, so the two kinds of humidification have more significant impact on indoor particulate matter. But the purified water humidification has nearly no significant effect on it. The calcium and magnesium ionic compounds are partly removed after the water boiled, so the cold boiled water humidification has less impact on the indoor particulate matter than the tap water humidification. The mass concentration and particulate number concentration of the particle may also be affected due to the frequency of ultrasonic vibration.

Effect of the amount of trapped particulate matter on diesel particulate filter regeneration performance using nonthermal plasma assisted by exhaust waste heat

An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of trapped particulate matter(PM)were conducted.The concentrations of the PM decomposition products(CO,)and the internal temperature of the DPF were monitored to determine the performance of DPF regeneration and thermal safety of the NTP technology.The results showed that the concentrations of CO and CO2and the mass of P.V1 decomposition increased with the increase in the amount of captured PM,whereas the concentration of the NTP active substance(O,)escaping from the DPF decreased under the same working conditions of the NTP injection system.A higher amount of captured PM promoted the oxidative decomposition reaction between NTP and PM and improved the utilization rate of the NTP active substances.The peak temperature at the same measuring point inside the DPF generally increased and the phases of the peak temperature were delayed as the amount of captured PM increased.The temperature peaks and temperature gradients during the DPF regeneration process were far lower than llie failure limit value,which indicates that NTP regeneration technology has good thermal durability and increases the service life of the DPF.

Determination of arsenic in air particulates and diesel exhaust particulates by spectrophotometry

A method was developed for the determination of trace arsenic by spectrophotometry. The proposed method is rapid, simple, and inexpensive. This method can be used for sensitive determination of trace arsenic in environmental samples and especially in air particulates. The results obtained by this method as a proposed method were compared with those obtained by hydride generation atomic absorption spectrometry as a popular reported method for the determination of arsenic and an excellent agreement was found between them. The method was also used for determination of arsenic associated with airborne particulate matter and diesel exhaust particulates. The results showed that considerable amount of arsenic are associated with diesel engine particulates. The variation in concentration of arsenic was also investigated. The atmospheric concentration of arsenic was different in different sampling stations was dependent to the traffic density.

Source profiles of particulate organic matters emitted from cereal straw burnings

Cereal straw is one of the most abundant biomass burned in China but its contribution to fine particulates is not adequately understood. In this study, three main kinds of cereal straws were collected from five grain producing areas in China. Fine particulate matters （PMzs） from the cereal straws subjected to control burnings, both under smoldering and flaming status, were sampled by using a custom made dilution chamber and sampling system in the laboratory. Element carbon （EC） and organic carbon （OC） was analyzed. 141 compounds of organic matters were measured by gas chromatography-mass spectrum （GC-MS）. Source profiles of particulate organic matters emitted from cereal straw burnings were obtained. The results indicated that organic matters contribute a large fraction in fine particulate matters. Levoglucosan had the highest contributions with averagely 4.5% in mass of fine particulates and can be considered as the tracer of biomass burnings. Methyloxylated phenols from lignin degradation also had high concentrations in PM2.5, and contained approximately equal amounts of guaiacyl and syringyl compounds. 13-Sitostrol also made up relatively a large fraction of PMz5 compared with the other sterols （0.18%-0.63% of the total fine particle mass）. Normal alkanes, PAHs, fatty acids, as well as normal alkanols had relatively lower concentrations compared with the compounds mentioned above. Carbon preference index （CPI） of normal alkanes and alkanoic acids showed characteristics of biogenic fuel burnings. Burning status significantly influenced the formations of EC and PAHs. The differences between the emission profiles of straw and wood combustions were displayed by the fingerprint compounds, which may be used to identify the contributions between wood and straw burnings in source apportionment researches.

Atmospheric particulate pollution of Lanzhou using magnetic measurements

To differentiate between natural and anthropogenic particulate sources in the atmosphere in Lanzhou City, samples were collected in different sites. The dust flux was calculated and magnetic measurements were conducted. Results show a distinct pattern of variation of dust flux within a year and it agrees with the shifts of atmospheric circulation regime. The magnetic parameters indicate that natural sources are the major components of atmospheric particulate during late spring and early summer, while anthropogenic sources contribute much more during winter months. The data also support the earlier findings that magnetic parameters are effective for differentiating between particulate arising from natural sources such as soil erosion and from anthropogenic sources such as coal combustion.