Influences of the Fresh Air Volume on the Removal of Cough-Released Droplets in a Passenger Car of a High-Speed Train Using CFD

The spread and removal of pollution sources,namely,cough-released droplets in three different areas(front,middle,and rear areas)of a fully-loaded passenger car in a high-speed train under different fresh air flow volume were studied using computational fluid dynamics(CFD)method.In addition,the structure of indoor flow fields was also analysed.The results show that the large eddies are more stable and flow faster in the air supply under Mode 2(fresh air volume:2200m3/h)compared to Mode 1(fresh air volume:1100m3/h).By analysing the spreading process of droplets sprayed at different locations in the passenger car and with different particle sizes,the removal trends for droplets are found to be similar under the two air supply modes.However,when increasing the fresh air flow volume,the droplets in the middle and front areas of the passenger car are removed faster.When the droplets had dispersed for 60s,Mode 2 exhibited a removal rate approximately 1%–3%higher than Mode 1 for small and medium-sized droplets with diameters of 10 and 50μm.While those in the rear area,the situation is reversed,with Mode 1 slightly surpassing Mode 2 by 1%–3%.For large droplets with a diameter of 100μm,both modes achieved a removal rate of over 96%in all three regions at the 60 s.The results can provide guidance for air supply modes of passenger cars of high-speed trains,thus suppressing the spread of virus-carrying droplets and reducing the risk of viral infection among passengers.

Modeling and simulation of high-speed passenger train movements in the rail line

In this paper, we propose a new formula of the real-time minimum safety headway based on the relative velocity of consecutive trains and present a dynamic model of high-speed passenger train movements in the rail line based on the proposed formula of the minimum safety headway. Moreover, we provide the control strategies of the high-speed passenger train operations based on the proposed formula of the real-time minimum safety headway and the dynamic model of highspeed passenger train movements. The simulation results demonstrate that the proposed control strategies of the passenger train operations can greatly reduce the delay propagation in the high-speed rail line when a random delay occurs.

A Distributionally Robust Optimization Method for Passenger Flow Control Strategy and Train Scheduling on an Urban Rail Transit Line

Regular coronavirus disease 2019(COVID-19)epidemic prevention and control have raised new require-ments that necessitate operation-strategy innovation in urban rail transit.To alleviate increasingly seri-ous congestion and further reduce the risk of cross-infection,a novel two-stage distributionally robust optimization(DRO)model is explicitly constructed,in which the probability distribution of stochastic scenarios is only partially known in advance.In the proposed model,the mean-conditional value-at-risk(CVaR)criterion is employed to obtain a tradeoff between the expected number of waiting passen-gers and the risk of congestion on an urban rail transit line.The relationship between the proposed DRO model and the traditional two-stage stochastic programming(SP)model is also depicted.Furthermore,to overcome the obstacle of model solvability resulting from imprecise probability distributions,a discrepancy-based ambiguity set is used to transform the robust counterpart into its computationally tractable form.A hybrid algorithm that combines a local search algorithm with a mixed-integer linear programming(MILP)solver is developed to improve the computational efficiency of large-scale instances.Finally,a series of numerical examples with real-world operation data are executed to validate the pro-posed approaches.

A simulation model for estimating train and passenger delays in large-scale rail transit networks

A simulation model was proposed to investigate the relationship between train delays and passenger delays and to predict the dynamic passenger distribution in a large-scale rail transit network. It was assumed that the time varying original-destination demand and passenger path choice probability were given. Passengers were assumed not to change their destinations and travel paths after delay occurs. CapaciW constraints of train and queue rules of alighting and boarding were taken into account. By using the time-driven simulation, the states of passengers, trains and other facilities in the network were updated every time step. The proposed methodology was also tested in a real network, for demonstration. The results reveal that short train delay does not necessarily result in passenger delays, while, on the contrary, some passengers may get benefits from the short delay. However, large initial train delay may result in not only knock-on train and passenger delays along the same line, but also the passenger delays across the entire rail transit network.

Smartphone-Based Wi-Fi Analysis for Bus Passenger Counting

In the contemporary era of technological advancement,smartphones have become an indispensable part of individuals’daily lives,exerting a pervasive influence.This paper presents an innovative approach to passenger countingonbuses throughthe analysis ofWi-Fi signals emanating frompassengers’mobile devices.The study seeks to scrutinize the reliability of digital Wi-Fi environments in predicting bus occupancy levels,thereby addressing a crucial aspect of public transportation.The proposed system comprises three crucial elements:Signal capture,data filtration,and the calculation and estimation of passenger numbers.The pivotal findings reveal that the system demonstrates commendable accuracy in estimating passenger counts undermoderate-crowding conditions,with an average deviation of 20%from the ground truth and an accuracy rate ranging from 90%to 100%.This underscores its efficacy in scenarios characterized by moderate levels of crowding.However,in densely crowded conditions,the system exhibits a tendency to overestimate passenger numbers,occasionally doubling the actual count.While acknowledging the need for further research to enhance accuracy in crowded conditions,this study presents a pioneering avenue to address a significant concern in public transportation.The implications of the findings are poised to contribute substantially to the enhancement of bus operations and service quality.

Comparative Analysis of the Factors Influencing Metro Passenger Arrival Volumes in Wuhan, China, and Lagos, Nigeria: An Application of Association Rule Mining and Neural Network Models

This study explores the factors influencing metro passengers’ arrival volume in Wuhan, China, and Lagos, Nigeria, by examining weather, time of day, waiting time, travel behavior, arrival patterns, and metro satisfaction. It addresses a significant research gap in understanding metro passengers’ dynamics across cultural and geographical contexts. It employs questionnaires, field observations, and advanced data analysis techniques like association rule mining and neural network modeling. Key findings include a correlation between rainy weather, shorter waiting times, and higher arrival volumes. Neural network models showed high predictive accuracy, with waiting time, metro satisfaction, and weather being significant factors in Lagos Light Rail Blue Line Metro. In contrast, arrival patterns, weather, and time of day were more influential in Wuhan Metro Line 5. Results suggest that improving metro satisfaction and reducing waiting times could increase arrival volumes in Lagos Metro while adjusting schedules for weather and peak times could optimize flow in Wuhan Metro. These insights are valuable for transportation planning, passenger arrival volume management, and enhancing user experiences, potentially benefiting urban transportation sustainability and development goals.

Revenue management method and critical techniques of railway passenger transport

Purpose–Revenue management(RM)is a significant technique to improve revenue with limited resources.With the macro environment of dramatically increasing transit capacity and rapid railway transport development in China,it is necessary to involve the theory of RM into the operation and decision of railway passenger transport.Design/methodology/approach–This paper proposes the theory and framework of generalized RM of railway passenger transport(RMRPT),and the thoughts and methods of the main techniques in RMRPT,involving demand forecasting,line planning,inventory control,pricing strategies and information systems,are all studied and elaborated.The involved methods and techniques provide a sequential process to help with the decision-making for each stage of RMRPT.The corresponding techniques are integrated into the information system to support practical businesses in railway passenger transport.Findings–The combination of the whole techniques devotes to railway benefit improvement and transit resource utilization and has been applied into the practical operation and organization of railway passenger transport.Originality/value–The development of RMRPT would provide theoretical and technical support for the improvement of service quality as well as railway benefits and efficiency.

Last train timetable optimization for metro network to maximize the passenger accessibility over the end-of-service period

Purpose-This study aims to improve the passenger accessibility of passenger demands in the end-ofoperation period.Design/methodology/approach-A mixed integer nonlinear programming model for last train timetable optimization of the metro was proposed considering the constraints such as the maximum headway,the minimum headway and the latest end-of-operation time.The objective of the model is to maximize the number of reachable passengers in the end-of-operation period.A solution method based on a preset train service is proposed,which significantly reduces the variables of deciding train services in the original model and reformulates it into a mixed integer linear programming model.Findings-The results of the case study of Wuhan Metro show that the solution method can obtain highquality solutions in a shorter time;and the shorter the time interval of passenger flow data,the more obvious the advantage of solution speed;after optimization,the number of passengers reaching the destination among the passengers who need to take the last train during the end-of-operation period can be increased by 10%.Originality/value-Existing research results only consider the passengers who take the last train.Compared with previous research,considering the overall passenger demand during the end-of-operation period can make more passengers arrive at their destination.Appropriately delaying the end-of-operation time can increase the proportion of passengers who can reach the destination in the metro network,but due to the decrease in passenger demand,postponing the end-of-operation time has a bottleneck in increasing the proportion of passengers who can reach the destination.

Dynamic train dwell time forecasting:a hybrid approach to address the influence of passenger flow fluctuations

Train timetables and operations are defined by the train running time in sections,dwell time at stations,and headways between trains.Accurate estimation of these factors is essential to decision-making for train delay reduction,train dispatching,and station capacity estimation.In the present study,we aim to propose a train dwell time model based on an averaging mechanism and dynamic updating to address the challenges in the train dwell time prediction problem(e.g.,dynamics over time,heavy-tailed distribution of data,and spatiotemporal relationships of factors)for real-time train dispatching.The averaging mechanism in the present study is based on multiple state-of-the-art base predictors,enabling the proposed model to integrate the advantages of the base predictors in addressing the challenges in terms of data attributes and data distributions.Then,considering the influence of passenger flow on train dwell time,we use a dynamic updating method based on exponential smoothing to improve the performance of the proposed method by considering the real-time passenger amount fluctuations(e.g.,passenger soars in peak hours or passenger plunges during regular periods).We conduct experiments with the train operation data and passenger flow data from the Chinese high-speed railway line.The results show that due to the advantages over the base predictors,the averaging mechanism can more accurately predict the dwell time at stations than its counterparts for different prediction horizons regarding predictive errors and variances.Further,the experimental results show that dynamic smoothing can significantly improve the accuracy of the proposed model during passenger amount changes,i.e.,15.4%and 15.5%corresponding to the mean absolute error and root mean square error,respectively.Based on the proposed predictor,a feature importance analysis shows that the planned dwell time and arrival delay are the two most important factors to dwell time.However,planned time has positive influences,whereas arrival delay has negative influences.

A panel data model to predict airline passenger volume

Airline passenger volume is an important reference for the implementation of aviation capacity and route adjustment plans.This paper explores the determinants of airline passenger volume and proposes a comprehensive panel data model for predicting volume.First,potential factors influencing airline passenger volume are analyzed from Geo-economic and service-related aspects.Second,the principal component analysis(PCA)is applied to identify key factors that impact the airline passenger volume of city pairs.Then the panel data model is estimated using 120 sets of data,which are a collection of observations for multiple subjects at multiple instances.Finally,the airline data from Chongqing to Shanghai,from 2003 to 2012,was used as a test case to verify the validity of the prediction model.Results show that railway and highway transportation assumed a certain proportion of passenger volumes,and total retail sales of consumer goods in the departure and arrival cities are significantly associated with airline passenger volume.According to the validity test results,the prediction accuracies of the model for 10 sets of data are all greater than 90%.The model performs better than a multivariate regression model,thus assisting airport operators decide which routes to adjust and which new routes to introduce.

A simulation-based optimization approach for passenger train timetabling with periodic track maintenance and stops for praying

This paper presents two optimization methods for solving the passenger train timetabling problem to minimize the total delay time in the single track railway networks. The goal of the train timetable problem is to determine departure and arrival times to or from each station in order to prevent collisions between trains and effective utilization of resources. The two proposed methods are based on integration of a simulation and an optimization method to simulate train traffic flow and generate near optimal train timetable under realistic con- straints including stops for track maintenance and praying. The first proposed method integrates a cellular automata （CA） simulation model with genetic algorithm optimiza- tion method. In the second proposed approach, a CA simulation model combines with dynamically dimensioned search optimization method. The proposed models are applied to hypothetical case study to demonstrate the merit of them. The Islamic Republic of Iran Railways （IRIR） data and regulations have been used to optimize train timetable. The results show the first method is more effi- cient than the second method to obtain near optimal train timetabling.

A simplified pneumatic model for air brake of passenger trains

Braking system performance is relevant for both railway safety and network optimization. Most trains employ air brake systems;air brake systems of freight trains mostly cannot achieve a synchronous application of brake forces, which is usually customary for passenger trains. The paper generalizes a previous air brake pneumatic model to passenger trains and describes the needed modifications. Among them, the way the pressure reduces in the brake pipe is generalized. Moreover, this paper reports an analytical bi-dimensional function for calculating the nozzle diameter equivalent to the electro-pneumatic(EP) or the electronically controlled pneumatic(ECP)brake valve as a function of the wagon length and the time to vent the brake pipe locally. The numerical results of the new model are compared against several experimental tests of high-speed passenger trains of Trenitalia, namely ETR500 and ETR1000. The model is suitable to be integrated into the UIC software TrainDy, aiming to extend its computational field to passenger trains and to simulate the safety of trains during a recovery.

Evacuated tube transport technologies (ET3)^(tm):a maximum value global transportation network for passengers and cargo

Evacuated Tube Transport Technologies （ET3） offers the potential for more than an order of magnitude improvement in transportation efficiency, speed, cost, and effectiveness. An ET3 network may be optimized to sustainably displace most global transportation by car, ship, truck, train, and jet aircraft. To do this, ET3 standards should adhere to certain key principals： maximum value through efficiency, reliability, and simplicity; equal consideration for passenger and cargo loads; optimum size; high speed/high frequency operation; demand oriented; random accessibility; scalability; high granularity; automated control; full speed passive switching; open standards of implementation; and maximum use of existing capacities, materials, and processes.

NUMERICAL ANALYSIS OF NONLINEAR STABILITY FOR RAILWAY PASSENGER CARS

The Newton Raphson iteration and QR algorithm are combined to search the Hpf bifurcation point of the vehicle running on straight track and on large radius curved tracks. Limit cycles that are bifurcated from the equilibrium points and the saddle node bifurcation point are computed through employing a variable step Runge Kutta method and the Poincaré map. Finally, numerical simulations are carried out for the stability of a high speed passenger car operating on straight and large radius curved tracks. The influences of the radius of curvature and the superelevation of the track on the stability of the vehicle system are investigated.

Metro passenger flow control with station-to-station cooperation based on stop-skipping and boarding limiting

Metro passenger flow control problem is studied under given total inbound demand in this work,which considers passenger demand control and train capacity supply.Relevant connotations are analyzed and a mathematical model is developed.The decision variables are boarding limiting and stop-skipping strategies and the objective is the maximal passenger profit.And a passenger original station choice model based on utility theory is built to modify the inbound passenger distribution among stations.Algorithm of metro passenger flow control scheme is designed,where two key technologies of stopping-station choice and headway adjustment are given and boarding limiting and train stopping-station scheme are optimized.Finally,a real case of Beijing metro is taken for example to verify validity.The results show that in the three scenarios with different ratios of normal trains to stop-skipping trains,the total limited passenger volume is the smallest and the systematic profit is the largest in scenario 3.

Spatial Interaction and Network Structure Evolvement of Cities in Terms of China's Rail Passenger Flows

Cities separated in space are connected together by spatial interaction (SI) between them. But the studies focusing on the SI are relatively few in China mainly because of the scarcity of data. This paper deals with the SI in terms of rail passenger flows, which is an important aspect of the network structure of urban agglomeration. By using a data set consisting of rail O-D (origin-destination) passenger flows among nearly 200 cities, intercity rail distance O-D matrixes, and some other indices, it is found that the attenuating tendency of rail passenger is obvious. And by the analysis on dominant flows and spatial structure of flows, we find that passenger flows have a trend of polarizing to hubs while the linkages between hubs upgrade. However, the gravity model reveals an overall picture of convergence process over time which is not in our expectation of integration process in the framework of globalization and economic integration. Some driven factors for the re-organization process of the structure of urban agglomeration, such as technique advance, globalization, etc. are discussed further based on the results we obtained.

Research on Railway Passenger Flow Prediction Method Based on GA Improved BP Neural Network

This paper chooses passenger flow data of some stations in China from January 2015 to March 2016, and the time series prediction model of BP neural network for railway passenger flow is established. But because of its slow convergence speed and easily falling into local optimal solution of the problem, we propose to improve the time series model of BP neural network by genetic algorithm to predict railway passenger flow. Experimental results show that the improved method has higher prediction accuracy and better nonlinear fitting ability.

CO2 emission of urban passenger transportation in China from 2000 to 2014

This study reviewed the urban passenger transportation(UPT)development of seven typical cities in China from 2000 to 2014,estimated the UPT CO2emission,analyzed the structure,and discussed the main factors of UPT CO,emission.Results showed that increases of GDP,population,and UPT scale of the cities have speeded up.The most significant development of UPT is that the growth of private vehicles is greatly faster than that of public transportation.The total and per-capita UPT CO2 emissions both increased.The share of private vehicles emission to total UPT CO2emission has increased,with the share in range of 65%-88%in 2014,exponentially leading to the increases of total and per-capita UPT CO2 emission.Although UPT CO2 emission structure with more share of public transportation would slow down the UPT CO2emission increase,private vehicle CO2 emission is recognized as the dominated driving factor.Contributions of driving factors,such as GDP,population,private vehicle CO2 emissions,to UPT CO2 emission are different among the cities.Private vehicle CO2 emission.is the dominated factor for UPT CO2emission in Beijing and Taiyuan.Besides private vehicle CO2emission,GDP also plays an important role in UPT CO2emissions of Chengdu,Shanghai,Guangzhou,and Urumqi.Contributions of private vehicle CO2 emission and GDP to UPT CO2 emission are almost same in Xi'an.

Importance Analysis of Urban Rail Transit Network Station Based on Passenger

Current urban rail transit has become a major mode of transportation, and passenger is an important factor of urban rail transport, so this article is based on passenger and the degree of the road network structure, calculating the point intensity of stations of urban rail transit, and then reaching a station importance by integrating many point intensities in a survey cycle time, and getting the station importance of urban rail transit network through concrete examples.

An Improved Genetic Algorithm for Flight Path Re-Routes with Reduced Passenger Impact

Adverse weather has serious implications for flight timeliness, as well as passenger and aircraft safety. This often implies that alternative flight paths have to be used by aircraft to avoid adverse weather. To reduce the impact of such path re-routes, exact techniques such as artificial potential field model and Dijkstra’s algorithms have been proposed. However, such approaches are often unsuitable for real time scenarios involving large number of waypoints and constraints. This has led to the use of metaheuristic techniques that give sub-optimal solutions in good time. In this work, an improved genetic algorithm-based technique has been proposed. The algorithm used an improved mutation operator, reduced passenger inconvenience and considered the schedules of aircraft.